Used Baz for sale (91)

Condition: good (used), Year of construction: 2009, functionality: fully functional, Cutting and machining center for PVC frame profiles and mullion profiles. The machine consists of a loading magazine, saw module, G-module for PVC processing, cross table for manual insertion of steel reinforcements, screwing module with an automatic underscrewdriver, drilling module for dowel holes, longitudinal saw for mullion profiles, and outfeed table with hand screwdriver for the strike plates. Phjdoxbdnropfx Agzoa Available end of September 2025.

Year of construction: 2010, condition: good (used), 3.piece ball screw ( from HURON BAZ ) make SCHNEEBERGER Diameter 63 mm Diameter 50 mm Phjdpfxjh I T Nro Agzja Diameter 40 mm In good condition.

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Phedpfxjw Dc Nis Agzoa Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: used, machine/vehicle number: 007826, X axis working area: 5600 mm Y axis working area: 1200 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 17 Total number of tool changer positions: 12 Phjdpjwgkt Usfx Agzja

Condition: used, Year of construction: 1999, serial number 1296 ja changer ja fach documentation ja control Heidenhain 426 weight of the machine ca. 6 t Pjdexzu Atjpfx Agzeha

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Phodpfew Nklhsx Agzea Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Year of construction: 2014, condition: excellent (used), Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Phsdpfofmdcqox Agzea Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available -

Condition: used, functionality: unexamined, Ferwood Code: RU0010812 - Manufacturer Code: 1-056-08-3420 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Podpfjv Iz Ugex Agzjha

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type - Front emergency carpets Numerical Control Type PowerControl PC 85 - Software WoodWop No. 10 Supports/Rails (mm 1340) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store at No. 18 folds) Max. useful working area (X - Y - Z) mm 6175 x 1550 x 60 Max. useful working area (X - Y - Z) in edge banding mm 6000 x 1475 x 60 No. 2 Working areas - No. 2 Vacuum pumps (capacity m3/h 100 each) Motorized carpet to evacuate the wastes from the working process Total installed power KW 27 Working groups (top) Phjdpfxsh Ucn Rs Agzsa No. 17 Independent vertical boring spindles (power of the drilling head Kw 2,2) No. 4 Independent horizontal boring spindles No. 1 Vertical main Electro-spindle HSK F63 Kw 11 No. 1 Circular Saw 0°-90°) diam. (mm) 125 No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 2 reels/Coils)

Condition: used, Year of construction: 2004, Deckel Maho DMU 70 eVolution Year of manufacture: 2004, Operating hours: 68,400 h, Spindle hours: 25,024 h Heidenhain TNC 530, SK 40 tool holder, 5-axis swiveling table Travel paths 500 mm x 700 mm, internal cooling, chip conveyor, W + W filter system Filter system also from 2004, model EL-FI 1000, coolant tank capacity 900 l _____ Our general terms and conditions apply; additionally, the seller is not liable for typographical or data transmission errors. The visual appearance of the offered items corresponds to their age and the pictures shown. Pedpfx Agetvfpcezsha The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any guarantee.

Condition: good (used), CNC Machining Center HOMAG OPTIMAT BAZ 222/40/K with Edge Banding and Loading Gantry Electronically controlled milling, edge banding, finishing, and drilling center for the production of furniture components, solid wood, or similar materials. Two independent Y-axes for main spindle and edge banding unit Clamping table with 8 clamping consoles Y-1300 mm with tubeless vacuum guidance POWER CONTROL - Control system with PC85 Software: WoodWOP 5.0 Main spindle 7.5 kW 12-fold disc tool changer Interface for the automatic change of processing units with integrated pneumatic, electric, and electronic supply and C-axis drive Drilling head with 17 spindles Cut-off saw unit Edge banding unit 360-degree / Strip material: roll material Phodpfxexmvtqo Agzja Edge thickness: max. 2 mm with veneer; max. 3 mm with plastic Chip conveyor Vacuum pump Busch MM 1322 A, 300/360 m3/h (replaced in 2013)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Psdstrhq Hopfx Agzoha Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: good (used), travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Manufacturer: EMCO Type: MAXXMILL 500 new 2014 Control system: SIEMENS 840D Year of construction: 2014 High preformance spindle 34,5 kW and 110 Nm torq One setup to machine 500 x 500 x 475 mm (5 sides) Phjdpetw Rnfofx Agzsa Top machine for medium production runs 15 to 300 pieces 3560 Spindle hours Specifications Metric US Standard X - axis 650 mm Y - axis 550 mm Z - axis 500 mm A - axis -100 to +100 ° B - axis 360.000 ° Table length 600 mm Table width 600 mm Table load 250 Feed X - axis 30000 mm/min. Feed Y-axis 30000 mm/min. Feed Z-axis 30000 mm/min. Tool holder ISO 40 ISO/Bt/Mk Spindle power 34 kW kW Spindle speed 10000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) Length 2900 mm width 3300 mm height 3000 mm weight 9200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece length (max.): 6,175 mm, workpiece width (max.): 1,550 mm, workpiece height (max.): 300 mm, spindle motor power: 18,500 W, Homag CNC Machining Center BAZ 211/60/K Venture 21 XXL with 6 m working length, PowerEdge edge banding unit, renewed vacuum pumps, Windows 10, and WoodWOP 8.1, in very good condition: – Workpiece length 6000 – 6175 mm – Pendulum processing 2375 – 2550 mm – Workpiece width 1400 – 1550 mm – Maximum workpiece thickness 300 mm – Working height 950 mm (underside of workpiece) Phsdpfx Agox Dzbzjzoa – Modernization I 2023: – 2 new rotary vane oil-lubricated vacuum pumps – Capacity 2 x 63 m³/h = 126 m³/h – Retrofit kit for separate cooling unit for main spindle – Modernization II 2024: – New machine PC with Windows 10 operating system – Upgrade to WoodWOP 8.1 – 4-axis CNC machining center – K console table – 10 consoles incl. front stops – 6 rear stops – 6 lift rails – 2 side stops each left/right/mirrored – 2 pneumatic connections per machining position – 2 vacuum connections for templates – C-axis with aggregate and electronic interface – Safety device with anti-slip mats – Main spindle 18.5 kW vector controlled – Liquid cooling for main spindle – 10+18-position disc tool changer: – 10-position disc changer moving with main spindle – 18-position disc changer moving with X-support – MPU drilling head 30 spindles V20 / H10 / S360° – MultiProcessingUnit with C-axis +/- 185° – 20 vertical high-speed spindles – 10 horizontal spindles – Grooving and separating saw 200 mm – PowerEdge 360° edge banding unit – Pickup station moving with X-support – Edge thickness 0.4-3 mm – Max. edge height 65 mm – 360° edge banding with butt joint – Pre-trimming station and single roller for PowerEdge – Hot air nozzle for edge banding unit – Combined flush trimming and finishing unit WD 60 mm – Flush trimming of edge overhangs – Finishing pre-milled edges – For use in main spindle – Probing for compensation of workpiece tolerance – 2 WPL radius cutter heads – 2 profile cutters for finishing unit – C-axis extension for Flex-5 unit – 10 LED position display systems for consoles – Optical LED display system – For positioning clamps and consoles – 4-fold configuration with 2 x 2 clamping positions – Separate vacuum systems – Detachable console for adjustable side stop – 2 additional side and longitudinal locating pins – 2 additional clamping consoles 1300 mm – 2 additional side and longitudinal locating pins – 2 additional lift rails for console table – 12 vacuum clamps 160x115x100 mm – 10 vacuum clamps 125x75x100 mm – Saw/drill unit with 2 spindles for tool changer – Saw blade diameter up to 240 mm – Side wall safety fence (left) – Rear safety fence – Side wall safety fence (left) – Year of manufacture 2008, single owner, very well maintained – Machine serviced regularly – No maintenance or repair backlog, no major defects – For sale ex location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and trial run possible by arrangement

Condition: excellent (used), Year of construction: 1999, CNC MACHINING CENTER ALZMETALL BAZ 15 Year of construction : 1999 Top condition Technical data : X : 600mm Y : 400mm Z : 600mm Psdpfxju Spdbe Agzsha Table : 750 x 450mm Main spindle : 10,000RPM Control : HEIDENHAIN TNC 426 24 magazine places

Condition: good (used), Alzmetall BAZ 15 CNC – Vertical Machining Center • 3 axes • Heidenhain control For sale is an Alzmetall BAZ 15 CNC, a compact and robust vertical machining center equipped with a Heidenhain control system. The machine is still operational and can be inspected under power. It is in well-maintained, technically flawless condition. Technical Data Manufacturer: Alzmetall Model: BAZ 15 CNC Application: Milling Machine type: Vertical machining center Control system: Heidenhain Weight: 3,200 kg Table load: 500 kg Axes: 3 X travel: 600 mm Y travel: 400 mm Z travel: 600 mm Spindle speed: 9,000 rpm Tool magazine: 24 positions If interested, simply write or call. Pjdoxxxu Uepfx Agzjha

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-09-5124, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, working height: 60 mm, TECHNICAL DETAILS X-axis travel: 6,000 mm Y-axis travel: 1,650 mm Y-axis travel (for milling): 1,750 mm Maximum working height for trimming: 60 mm Phedpfxexx Nnxs Agzja Maximum applicable edge height: 65 mm Minimum inner radius: 30 mm Tool change positions: 18 Aggregate saw blade diameter: 200 mm (max.) MACHINE DETAILS Vertical electrospindle (C-vector axis, automatic tool change, cone type HSK F63): 11 kW Drilling head output: 4 kW Vertical drilling spindles in X-axis: 11 Vertical drilling spindles in Y-axis: 6 Horizontal drilling spindles in X: 6 Electrical Data Voltage: 400 V Current: 39 A Frequency: 50 Hz Current: 50 A Control voltage: 24 V EQUIPMENT Numerical control with WoodWop software Adjustable panel support rails for suction cup positioning Pneumatic rods for loading/unloading assistance Adjustable Schmalz-type vacuum suction cups Laser positioning system for suction cups Independent edge-banding unit with 360° rotation Glue pot and premelter for granular EVA adhesive Applicable edge materials in rolls: PVC / ABS 0.4 – 3 mm Rubberized pressure roller + panel preheating lamp Edge trimmer Combined trimming/edge unit Edge holder magazine Chip extraction system with motorized conveyor belt Air conditioning unit for cooling and cleaning of machine control Automatic lubrication system Vacuum pump

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, 3-axis machining center Manufacturer: DMG Series: DMU-80P Year of manufacture: 1999 Control type: Heidenhain TNC-430 Switch-on hours: approx. 95,900 h Program run: approx. 28,100 h technical data: ----- - Travel X-Y-Z: 800 x 700 x 600 mm - Work table: 900 x 630 mm Podperqhbbofx Agzeha - Spindle max.: 12,000 rpm - Swivel head H/V - Tool holder: SK40 - Tool magazine: 30x / chain - Coolant system - Central lubrication - SpäFö - Weight: approx. 9.2 t Accessories: ----- - Manuals - 3D workpiece probe TS-641 Remarks: ----- - FEB 2023: new spindle + kinematics - FEB 2023: new E-module 36kW - APR 2023: new AC servo inverter - DEZ 2015: General overhaul - Machine absolutely true to size!

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, BOB-Mill M8 Model/Mold Making Engraving and Milling Center in Gantry Construction TECHNICAL DETAILS X-axis travel: 700 mm Phjdpfx Aoxv Su Nogzsa Y-axis travel: 800 mm Z-axis travel: 330 mm Spindle speed: 27,000 rpm Control unit: Mitsubishi E 80 Spindle nose to table: 110 – 440 mm Door width: 760 mm Worktable size: 800 x 600 mm Table load capacity: 400 kg Number of T-slots: 5 T-slot size: 18 mm T-slot spacing: 115 mm Spindle taper: BT30 12-position tool changer Feed rate: 0–10,000 mm/min Rapid traverse X / Y / Z: 15,000 mm/min Positioning accuracy: ± 0.005 / 300mm Repeatability: ± 0.003 mm MACHINE DETAILS Spindle motor power: 7.5 kW 3-axis motor power X / Y / Z: 1.5 x 1.5 x 1.5 kW Machine weight: 4,300 kg Dimensions: 2,000 × 2,500 × 2,400 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Machine number: 559969 Manufacturer: HOMAG Model: PROFI BAZ 723/42/18/KC Year of manufacture: 2004 Technical details: Weight approx.: 10000 [kg] control: PC85 [] Dimensions (l x w x h) approx.: 39000 x 3200 x 3200 [mm] c-axis: ja / yes [] software: WoodWOP [] working length x-axis: max. 4.200 [mm] working width y-axis: max. 2.075 [mm] main spindle: 2x 14,5 [kW] tool changer: 2x 18-fach / 2x 18-fold [] vacuum pump: 2x 100 [cbm/h] edge gluing unit: ja / yes 360° [] path-feed rate max. X-axis: 80 [m/min] path-feed rate max. Y-axis: 60 [m/min] path-feed rate max. Z-axis: 40 [m/min] Item Description High-End-equipped, technically well maintained HOMAG PROFI BAZ 723/42/18/KC CNC Machining Center in portal design with 360° edge glueing unit, 2 main spindle with C-axis, automatically positionable clamping consoles and HOAMG Optimat TBP 370 vacuum feeder in in portal design. The original price was approx. 620.000 EUR. Technical data and equipment of the HOMAG Profi BAZ 723 CNC: - Workpiece length for single operation max. 4.200 mm - Workpiece length cutter Ø 25 mm for pendulum operation max. 2.040 mm - Workpiece length glueing for pendulum operation max. 1.850 mm - Workpiece width (cutter Ø 25 mm) max. 2.075 mm - Workpiece width (glueing) max. 1.950 mm - Workpiece width (all aggregates) max. 1.850 mm - Console table KC-System 2 pieces left/right automatic positioning of the consoles and vacuum clamps - First main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Second main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min Phsdpfx Agexvy Ukszsa tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Edge gluing aggregate 360° glue with butt joint mounted on the right side of the portal with Y-axis drive Drive spindle with C-axis edge height max. 65 mm edge thickness 0,4 - 3 mm pre-cutting station and 2-fold roller magazine - Chip conveyor belt for automatic disposal with ascending conveyor (The tools, the HSK holders and the units for the tool changer are not included within delivery. A transport rack from HOMAG is required for transportation of the dismantled machine. Terms of payment and delivery Delivery terms: ex foundation, unpackaged Payment terms: 100% before loading Warranty: Without any warranty

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0-201-24-6821, Fully functional Homag BAZ 41 4-axis CNC machining center, ready for operation. Perfect for panel, MDF, wood, and door production. Table size 3000mm*1300mm Includes 3 processing units (aggregates). Podpfxext Tzle Agzjha Machine is in good working condition can be tested on site.

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, Machining Center - Vertical IXION model BAZ 325 Phodpfx Agjxl Syqezsa year of manufacture 2001 type of control Heidenhain TNC 426 x-travel 600 mm y-travel 400 mm z-travel 650 mm tool magazine 12 pcs table surface area 800x400 mm tool taper SK40 spindle turning speed range 40- 7000 U/min weight of the machine ca. 4 t Z-axe error - needs to be repaired - for parts No tools, no air extractor Offers wanted

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Podpsvt D D Usfx Agzeha Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door Phodpfx Aequhbgegzea - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets Phjdpfx Agsdzqmfszja - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis - Coolant spray nozzles on the ram spindle and in the work area - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm