Used Baz for sale (67)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Stürtz cutting and machining center, feed direction from left to right, consisting of a cutting center with a feed magazine, three saw heads (2 x 45°, 1 x 90°), an automatic station for milling posts, a transverse conveyor belt, a machining center with a double strand, an automatic screwing station, and an output conveyor with a workstation for attaching closing plates, safety fences. Hnsdpfx Ajz Di D Uek Ueu

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: WT 1104, total height: 3,421 mm, total width: 4,704 mm, total length: 9,550 mm, load capacity: 200 kg, construction height: 3,421 mm, Vacuum Turning Portal for Panels The turning unit offers two different "automatic" operating modes: I. Component is conveyed without rotation The component is only shifted laterally, aligned to the reference edge (zero line) of the machining center, and then fed further to the CNC machining center (BAZ). II. Component is conveyed with rotation The component is shifted laterally and rotated along its longitudinal axis before being fed further to the CNC machining center. Each function can also be manually controlled in "manual" mode. SPECIFICATIONS: Max. panel dimensions: LWH: 8000mm x 2500mm x 100mm Max. weight: 200kg Min. panel dimensions: LWH: 1500mm x 1500mm x 12mm The turning portal is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the panels. Hodpfoyta R Uex Ak Uenu The panels are always lifted via suction, then either moved horizontally to the zero line of the machining center or additionally rotated 180° en route before being delivered to the reference edge. The rotational movement is monitored via absolute encoders; the lateral positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm with roller diameter 108 mm, is fitted with material-friendly rubber rings and is driven by a SEW gear motor. Control of the roller table is via frequency inverter, adjustable speed up to 45 m/min. GENERAL INFORMATION: The entire area is enclosed by fencing; the longitudinal side of the system is secured by two sliding doors, which are safety-monitored. An operator touchpanel (12") is integrated into the fence area. The installed PLC (Siemens S7-1500) is programmed with three modes: • Automatic operation • Manual operation • Maintenance operation Input signals, loading side: – Start roller table – Rotate yes/no – EMERGENCY STOP complete system Input signals, unloading side: – Start roller table – EMERGENCY STOP complete system System output signals: – EMERGENCY STOP complete system – Panel infeed confirmed

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle Hodoyic Tujpfx Ak Uonu - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Hjdpfxevt D D Uo Ak Ujnu Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, High-end 5-axis flipping machine for aluminum structural components available at short notice. 90–95% completed, available for on-site demonstration under power. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large-format, thin-walled aluminum structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and can be inspected under real machining conditions. 👉 This machine platform has already been installed more than 80 times. Hnjdpfx Aey H Ncbek Uou Highlights - Available at short notice (delivery time approx. 3 months) - High-end configuration (Fischer / Siemens / Heidenhain) - Full 5-axis machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminum structures - Very attractive price-performance ratio - Includes 2 pallets sized 2000 x 4000 mm, setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min - Positioning accuracy: up to 0.008 mm - Repeatability: up to 0.004 mm Spindle - Fischer (Switzerland) - 30,000 rpm - 125 kW - 66 Nm - HSK-A63 - ICS 70 bar Features - 5-axis torque motor swiveling head (zero-backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation - R-TEST calibration system Including setup station and pallets! German service, spare parts warehouse, etc.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 15,000 h, functionality: fully functional, working width: 1,430 mm, type of input current: three-phase, total width: 5,000 mm, total length: 5,500 mm, total height: 2,100 mm, overall weight: 4,000 kg, input voltage: 380 V, Automatic flatbed die-cutting machine with sheet feeder, suitable for cardboard and corrugated board. The machine is fully operational and ready for production. The machine offers absolute safety for the operator. Hnjdjzidbnepfx Ak Uou Maximum sheet size: 1030 × 1440 mm.

Condition: used, Year of construction: 2001, BAZ Hurco VMX 40, year 2001 for sale in very good condition. Hnedsy Nlpcopfx Ak Usu

Condition: used, functionality: fully functional, machine/vehicle number: 2-017-95-2630, Motor spindle for CNC machine Weeke BOF and BAZ. Hedpfexnbmfox Ak Usnu - Available 7 pcs (in that quantity 2 pcs with C axis); - 12000 - 24000 Rpm; - 16kW - HSK 63

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Hnjdpfew Dc Nijx Ak Uju Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 0-201-09-5124, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, controller model: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working range: 6,000 mm Y-axis working range: 1,650 mm – up to 1,750 mm for milling Max. travel height during edge banding: 60 mm Max. applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C Vector: 11 kW, HSK F63 Edge specification: Rolls, PVC / ABS 0.4 - 3 mm EQUIPMENT 10 adjustable support rails for vacuum cups Loading and unloading aid with 8 pneumatic rods Vacuum cup positioning with laser system Edge banding unit with 360° rotation, glue pot, and preheater for granular EVA glue Rubber-coated pressure roller + Rubber-coated pressure roller Preheating lamp Edge trimmer and edge scraper Edge holder magazine Front and side safety system with carpets Protective cage around access area Chip extraction with motorized conveyor belt Air conditioning for machine control cabinet Automatic lubrication system Hsdpfeydl Nwsx Ak Ujnu Vacuum pump

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Hjdpoquhbgefx Ak Ujnu Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller model: Heidenhain TNC 426, rotational speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 800 mm Spindle speed: 30–8,000 rpm Spindle taper: ISO 40 Table size: 1,250 x 630 mm Workpiece weight: 1,000 kg Hnodoyv Ayfopfx Ak Uou Tool changer: 24 positions MACHINE DETAILS CNC control: Heidenhain TNC 426 Dimensions & Weight Space requirements: approx. 4.2 x 3.3 x 3.15 m Machine weight: approx. 7,500 kg

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 Hnedpfx Ajtrhq Hjk Uou CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 2005, dimensions of table 700 x 400 mm clamping surface 330 x 580 mm 3 t-slots 12 mm travelling distance approx. 400 mm scale 0.05 mm 1 turn of spindle = 4 mm pivoting 360° with locking device height of construction 195 mm max. load of table approx. 100 kg max. operating pressure approx. 500 kg Hjdpfx Akjcw Tqkj Uonu space required length - 850 x width - 400 x height - 195 mm weight approx. 172 kg originally packaging - year of manufacture estimated *- new - unused -* *- 1 unit on stock - *

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Hnodpfx Aeu Tln Nek Ueu Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Hnodpoyrpw Isfx Ak Usu

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Hedezcyqmjpfx Ak Uenu

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Hnodpfxjyrpxxs Ak Uju

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 1000 mm z-travel: 500 mm B-axis (table): 360 ° spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min rapid traverse X,Y: 15 m/min. rapid traverse Z-axis: 12 m/min Hnsdpfsu Idm Nsx Ak Usu total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine xH: 3,5x2,4x3,2 m 5-axis BAZ in parallel kinematics suitable for prototypes. i.D. *

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Hnodpfx Akencd Ece Ueu Capacity of stainless steel tank: 500 liter Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, functionality: fully functional, HOMAG HSK F63 CORNER ROUNDING AND END TRIMMING UNIT Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully operational - Compatible machines: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - If interested, we offer an overhaul service, contact us. Weight and transport dimensions: 10KG 46X39X27 CM Hnodpfxjvu A D Nj Ak Ueu

Condition: used, functionality: fully functional, Ferwood Code: RU0011480 - Manufacturer Code: - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC WEEKE VENTURE - WEEKE BHC - HOMAG BOF - HOMAG BAZ - HOMAG CENTATEQ - If interested we offer an overhaul service, contact us. Hnodpfx Akev I A Rpj Uou

Condition: used, functionality: fully functional, Ferwood Code: RU0005249 - Manufacturer Code: 2-083-03-0092 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC - EDGE BANDER - LOADING UNLOADING HOMAG KAL-KFL - BARGSTEDT - HOMAG BAZ - If interested we offer an overhaul service, contact us. Hnsdpfx Asv Ed Tajk Uju

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang Hodpjzux Tpefx Ak Usnu - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Year of construction: 2010, condition: new, Spare part for CNC BAZ Manufacturer: DMG MORI Hnjdpod S A Unsfx Ak Ueu Type: DMF 220 Linea Parts are new. Ball screw for Y and Z axis. Guide rail kit for the complete X axis, including brake.