Ctp setter buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
4
2008 Heidelberg Suprasetter 105 (Ref.: 1001482)Year: 2008Equipment 33 Plates/Hour 2540 dpi SCL - Single-casette loader/ Punching 780 mm Mkit Meta Shooter 4.0 DE Meta Shooter S 710 Opt MD ColorProof Pro 105 MDT 48B - Plate transport PST 36L -Platepiler Gluntz & Jensen 85 HDX (year 2008) Plate Processor Counter: 117.000 / PlatesDelivery: Immediately 9ld9eh0nu more
6
Computer-to-Plate is globally the leading technology for platemaking. Platesetters are required to stay in top condition shift after shift and under continuous use. The Heidelberg laser technology, which was developed exclusively for the Suprasetter models, makes this possible for a long-term usage. This used Suprasetter 145 with a max plate format of 1,425x 1,460mm is readily available on stock and can be inspected upon short notice. Type: 3 x ACL cassettes for 100 plates with paper, Number of... more
6
2 x Laser Heads Plate stacker Grafoteam PST 48-B Laser resolution: 2540 dpi Laser Power: 160 Mw OLP-Slow Plate processor Glunz & Jensen PT 135 Badk0vllvu Plate stacker Grafoteam MDT 48 more
2
Heidelberg Suprasetter A52/A74 E0ixcbe03 Gen III ATL (AutoTopLoader) year 2012 with Processor Raptor MP-II 85 T year 2013 with PST Advant Stacker with Heidelberg Metashooter Located Swizerland Available: 02/2018 more
min. plate format 370 x 323 mm, maximum plate size 930 x 1,140 mm, resolution 2,400 dpi, maximum throughput 30 plates, including control software, compressor Fabr. Kaeser, printing plate developer Kodak Polychrome mercury 850, 2006, a feed system Grafoteam PST48N, 2008, a manual plate punch, Fabr. Bacher, type 2022, good condition, still in production, price from site upon request, transport and installation worldwide upon request Vv9jxl8t more
1
Heidelberg Prosetter 74 from 200 approx. 50.000 plates only 30mW violet laser to expose photopolymer metal plates manual loading refurbished offline plate processorG & J Raptor 68P with preheat Prinect Metashooter & MetaDimension RIP All machines will be cleaned, maintained and tested available from stock All offer subject to prior sale Xt9mbnfiz worldwide Installation on request more
2
CTP Prosetter 74, processor GlunzJensen 68P, exposed 115.000 plates, very good condition, new mirror motor, semiautomatic RIP Heidelberg Metadimension Laser type: 405 nm Violet Laser diode 60mW Max. Plate size 670 x 750 mm C87ai9ceq Min. Plate size: 370 x 323 mm Up to 16 plates per hour at 2,540 dpi Manual insertion of the plates Plating: Vieolett. photopolymer- Aluminum plates 405-410nm Plate thickness: 0.15 to 0.30 mm Working under yellow safety lighting, optional new RIP + 1.500 € more
3
This used Suprasetter A75 was operating at a swiss commercial printer. It is now readily available in our warehouse and can be inspected upon short notice. Computer-to-Plate is globally the leading technology for platemaking. Platesetters are required to stay in top condition shift after shift and under continuous use. The Heidelberg laser technology, which was developed exclusively for the Suprasetter models, makes this possible for a long-term usage. Pqxfjsox Number of Cassettes: Online-Pla... more
1
Laser Type: 3 Lightmodules DSI³ – UV – CTP for conventional plates Min. Plateformat: 323 x 425 mm Max. Plateformat: 940 x 1150 mm Productivity: up to 30 plates/h Produced until now: 257.975 plates Lasermodules elapsed: approx. 7.500 h (each) Incl. Multi-Cassette-Loader (5 Cassettes) Incl. Online-Plateprocessor Glunz + Jensen Gecko 85 T (Y/M: 2012) 7twr087tb Incl. PlateStacker Incl. 1-Bit-Tiff-Connection more
3
8 up Termal CTP System Trendsetter 800 II Quantum year 2003 M3vpv 40 mW Laser 2800 Laserhours 120.600 plates produced with Plateprocessor Glunz& Jensen Plattenabstapler Advant PST 360L with Printconsole and RIP Located Swizerland more


ctp setter
every day

New machines via email!

Be informed!
2
Basysprint UV Setter semi-automatic CTP Anlage including Lastra Extrema 95 developing system and separate water chiller - Digital Screen Imaging with UV - Exposure - Wavelength approx. 360 - 450 nm - Format approx. 690 - 940 mm - Materialthickness 0.15 - 2,0 mm - Dimensions UV Setter W 2.300 x D 2.000 x H 1.710 mm Gumglngyi - Weight UV Setter approx. 2.000 kg - Operating hours approx. 31.000 h - Lamp operating hours approx. 650 h ( of max. 2.000 h) Professionally dismantled and packed on pa... more
Kodak/Creo Trendsetter VLF 5067 Quantum, V-Speed, mfg-year 2003, 40-watt-laserhead, includes creo print console with tiff-downloader, chiller and debris removal, maximum plateformat 1270 x 1702 mm available immediately 02afjoyw9 price on request, transport and installation worldwide more
5
Heidelberg Suprasetter S105, 2007 Sn8umgfkg HD + Bacher 780 mm interal punch 3 laser heads Gen.1 to expose thermal metal plates manual loading, up to 19 plates/h in B1-format approx. 156.000 plates exposed online KODAK Mercury 1250 plate processor Heidelberg Prinect MetaShooter All offers are subject to prior sale Installation on request more
2
approx 39.400 Plates semiautomatic Laser type: 405 nm Violet Laser diode 60mW Max. Plate size 670 x 750 mm Min. Plate size: 370 x 323 mm Repeatability: +/- 5 µm Image to Image +/- 25 µm Plate to plate Up to 16 plates per hour at 2,540 dpi Manual insertion of the plates Plating: Vieolett.Sensitive silver halide or photopolymer- Aluminum plates 405-410nm Plate thickness: 0.15 to 0.30 mm Working under yellow safety lighting Data formats: 1-bit TIFF bitmap files, packed format CCITT Groupe 4. LZW an... more
6
AGFA XCalibur year 2004 45 S elite Mxiop Max size: 1030 x 800 with plate Manager with Plateprocessor Stacker Printdrive and RIP Locaed Germany can be lakes in production / test and demonstration against price Freihaus possible delivery, commissioning experts training possible more
6
UV CTP Platesetter System Luescher X Pose 130 year: 7/06 32 diodes 6604 hours 44827 plates Slipring 51498 with RIP 88degu088 with Kodak Polychrome Plateprocessor Located Germany Availaable now Price on request more
1
full-automated thermal CTP system Kodak Magnus VLF 6383 Quantum with MCU and Kodak Prinergy Evo Workflow on Dell Server Dell-Server T 610 (Xeon Multiprocessor, 2.4 GHz, Windows 2003 SRV) under Kodak-maintenance, in very good condition Oh0o0l9a sn. MTA 005 Multi-Autoloader MCU type MMB 003 with three cassettes Slipsheet Removal-Component speed 12,3 plates per hour (full size) 2400 dpi thermal Laser plate size min. 483 x 394 mm plate size max. 1600 x 2083 mm plate thickness 0.15-0.4 mm plate pr... more
2
thermal platesetter with autoloader MCU4 (4 cassettes), 2400 dpi, V-speed, 40-watt laser, maximum plate format 1270 x 1702 mm, incl. control computer with Printconsole 3uzgrdipk Available II. quarter of 2017 Price from site upon request, transport and installation worldwide more
5
CTP HEIDELBERG PROSETTER 102 Max.Plate Size 811 x 1055 mm 327o9uyf Min.Plate Size 400 x 510 mm Imaging Area 786 x 1055 mm Resolution 2,400 / 2,540 / 3,386 dpi Plate thickness 6 mil – 12 mil (0.15–0.30 mm) Laser Type let laser diode; 405 nm; 5 mW YEAR 2002 Plate developer Raptor 95 Polymer in great condition more
6
Heidelberg Topsetter 102 Thermal CTP 2005 year, 32 laser diodes Glunz & Jensen Raptop PRO plate processor Bbxshtj PLATE STACKER more
3
measuring range Z-axis 200 mm measuring range X-axis 80 mm tool taper Zyl. Ø60/Ø18 mm mm table-size 480 x 290 mm Mbwr3r8 more
6
x-axis: 500 mm z-axis: 685 mm diameter: 300 mm air pressure - required: 5 bar tool table-turnable: 360° Tool table: Dm=745 mm tool diameter: ca. 290 mm total power requirement: 0,5 kW weight of the machine ca.: ca. 0,15 t Yv93hisz space requirement of the machine approx.: 2,38x1,45x1,94 m Adjustment- and Measuring Device measuring range z = 680mm measuring range x = 500mm pneumatical slide clamping manual endless fine adjustment turret rotating table 220V/; 50/60Hz accessories: taper 1x SK40 an... more
6
Machine type: Suprasetter A52- A74 Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: Available from: 01/2018 Machine is: in production SUPRASETTER A52/A74 with hand feed 45.484 plate exposures incl. punch 52/74 bridge GLUNZ & JENSEN C85 ... more
1
CRON TP4632E, age 2011 with TIFF spooler only Baecjv8nem Diode 31 must be changed! (incl. 4 spare part diodes) more
6
Year of construction 2011 In general: Controller Pilot 3.0 Handling Onehand operating button, Joystick (semi-automatic) Taper SK50 Spindle indexing 4x 90° Rotational center measuring Camera, Autofocus Clamping unit Vacuum Technical data: Dmjgxll Tool length (max.) 400 mm Tool-ø (max.) 400 mm Tool weight (max.) 30 kg Electical connection 230 V/50 Hz Pneumatic connection 6 bar Equipment / Accessories Adapter: VDI40, HSK63 Operating unit: Cockpit-Pilot with 23" TFT-Screen Toolmana... more
1
measuring range X-axis:1 mm Rczdtsh8s measuring range Y-axis:1 mm Table dimensions:1 mm tool diameter: mm 100 % before loading warranty: none used tool presetter, make ZOLLER, type EG 1500, year of production 1985 more
2
measuring range X-axis 420 mm measuring range Y-axis 370 mm tool adaptor VDI 40 / VDI 50 voltage 230 V K8npoed0 total power requirement 100 VA weight 700 kg dimensions of the machine ca. 1,55 x 0,90 x 1,55 mm - Serial - No.: 1144 - digital readout KELCH Pico - VDI 40 / VDI 50 more
6
inserted tooth milling cutter dia. max. 550 mm workpiece weight 150 kg locating plate for cutter heads - Ø 65 - 360 mm nominal taper - Ø cutter heads (spiron/arkon) 58,2 mm travel -z axis 160 mm Mxl3z total connected load 2,2 kW dimensions of the machine ca. 2,10 x 1,60 x 2,20 m weight 2,30 t more
3
measuring range X-axis:300 mm measuring range Y-axis:400 mm Table dimensions:450 mm tool diameter:ISO 40 mm amplification -fold:150/20 9nvxpki29 weight:0,5 t total power requirement:1,5 kW dimensions of the machine ca.:1,8 x 1,0 x 1,8 m Machine with indexing device for ISO 40 and collet clamping - pneumatic saddle and tool clamping - measuring computer with screen and printer more
4
CHALICE KALIMAT A58-3/C Vertical tool presetter Year of construction: 2006 Unit No. 5474 Operating system: Windows XP Measuring range: X: 50 to Ø 530 mm / Z: 800 mm Facilities: Cuogr3t TUL carrier tableau in periphery media column Printer Panel in periphery media column Separate monitor for camera image 17 " Label printer with dispenser Basic module modular precision spindle, CNC, vertical (ROD) 1 x usage module modular precision spindle SK 50 1 x usage module modular precision... more
1
ECRM Stingray63, A1 movie Belichter 90rbcru3c more
5
Thermal CTP Max plate format: 1165 x 950 mm Bacher 2000 system Juo2ha Running time: 49000 hours Laser Type: GLV Laser unit Avalon N8-50 High Resolution Autoloading Plate recorder PT-R 8800III Azura Ultima 12 Elantrix St 125SX Agfa plate manager (3 cassetts) Locking kit Multi-Cassette-Loader (3 cassets) more
3
measuring range X-axis 160 mm measuring range Z-axis 42 - 360 mm taper ISO 40 construction: horizontal/vertical voltage 230 V 7btmcmlxu total power requirement 50 W weight 50 kg dimensions of the machine ca. 500 x 400 x 900 mm - [...]: 0701001 more
5
ZOLLER tool before adjusting device with AC adapter for index GE / GB / it / machines and GM / Schütte Lathes GILDEMEISTER some universal can be used (VDI, etc) -with Heidenhein measuring device -various basic holders -Measuring table etc. B3szyel more
5
CHALICE KALIMAT A58-3 / C Vertical tool presetter Gadgets No. 5367 Year of construction: 2004 Operating system: Windows 2000 Measuring range: X: 50 to Ø 530 mm / Z: 800 mm Facilities: TUL carrier tableau in periphery media column Printer Panel in periphery media column 9q83owly0 Separate monitor for camera image 17 " Label printer with dispenser Basic module modular precision spindle, CNC, vertical (ROD) 1 x usage module modular precision spindle SK 50 1 x usage module modular ... more
2
2 x ECRM Mako3635, A3 film Belichter Dmjfnlt 1 x MAC G3 with V5 RIP and monitor with TV function 1 x MAC G4 with V6 RIP and monitor separately to give more
1
Measuring range X-axis: 400 mm Measuring range Z-axis: 460 mm Position: Type EPA 4005 with measurement resolution Accessories: material reduces ISO 40 / ISO 30 Projector 159: Projector with 20-fold magnification 159 mm recording: ISO 40 9 memory slots: with angle adjustment Bergr. 20x calibration doctrine ISO 40 Dyfxxot more
5
measuring range X-axis 500 mm measuring range Y-axis 500 mm control ZOLLER 6052 manual operated rotary table 600 mm voltage 220 V weight 500 kg dimensions of the machine ca. 1,70 x 1,00 x 1,70 m Qnutgpjas more
5
Make: ZOLLER type: V 420 E Xa7pi0ww Year of construction: 1999 X-axis measuring range: 200 mm measuring range Z axis: 500 mm tool holder: SK 50 space requirement approx.: 2.5 x 2.0 x 2.0 m weight approx.: 400 kg adapter: SK 50 / SK 40 more
2
travel X/Y 420/370 mmm table size 600x600 mm Ebehd7z rotary table D 600 mm adaption VDI 20/25/30/40/60 more
2
Product: Platesetter / CTP 105 S Year: 2007 Format: 93 x 114 cm Details: 152.000 plates done, Bnvbulr 3 laser heads 830 nm with 64 diodes each, max. 19 plates/h at 2540 dpi, Metashooter, processor Kodak Mercury 1250, compressor, stacker Advand PST 48. Location/Status: Germany/on stock Optical/Techn. condition: good (regularly serviced and maintained) Available: shortly, upon agreement Price/Terms: upon request more
6
Fuji Luxel V-9600 CTP, age 2005,. Dual laser beam, approximately 200,000 plates, Multi cassette Loadr (3 cassettes),. Online processor heights FLP1260, plus plate stacker and trolly. Xitron 1 bit/TIFF spooler Directly available from stoke, ready for shipping. I9dgpi2 more
4
Display of measured values: Zoller 6080 X-axis measuring range: 300 mm Measurement range y axis: 300 mm Table size: 800 x 800 mm Mmxbt Voltage: 220 V Weight: 500 kg Dimensions: 1500 x 1000 x 1600 mm more
1
measuring range X-axis 300 mm measuring range Y-axis 200 mm Tgpagkgwd Dimensions (HxWxD) 1,60 x 0,80 x 0,70 mm Table dimensions mm more
6
 Start Chat

CTF Imagesetter AGFA AccuSet 800 Plus

Nürnberg Germany
6742 km
1992
USED
CTF Imagesetter AGFA AccuSet 800 Plus Jiazspj Year ca. 1992 -Available Immediately - -can be inspect- -on stock- more
1
ECRM Mako46, A2 film Belichter, Ee2rpyvx0 ECRM HQ RIP V6 with PC more
6
9iw8y7bhhResolution 1200 - 2450 dpi Green YAG laser more
3
Reference Num.: 3064 Brand: Bacher Type: Repro 2000 Dalydal Location: Germany incl. desk with drawers more
5
measuring range X-axis:150 mm Babirbiylf measuring range Y-axis:320 mm Table dimensions:120 mm tool diameter:300 mm more


ctp setter
every day

New machines via email!

Be informed!

to

to

Change search
CTP SETTER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close