Used Ctp Setter for sale (197)

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, chuck outer diameter: 160 mm, Delivered new in 2023 . pictures show covers off while being serviced- showing as new condition inside. High spec machine as new. Hnedpfx Afsx U D Ete Aor Tool setter swarf conveyor Tailstock Parts catcher Tooling as show. ONLY 600 CUTTING HOURS, NEAR NEW CONDITION Omega Design solutions run over 20 Haas machines and can help with all aspects of getting this machine up and running on you parts.

Year of construction: 1997, condition: good (used), Used fully serviced and good condition Trumpf 500r cnc punch press for sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale Fully serviced Machine capable of taking multi tool Hnodpfshtfp Tex Af Ajr Complete with tool holders and tools including multi tools Complete with Retractable clamps 3metre x 1.5metre sheet without reposition. Additional extras with the machine: Cabinet full of tooling Multitool Multiset – tool setter Quickload Quick sharp tool grinder Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1997

Condition: good (used), Heidelberg GTOV 36x52cm + Mako 2 CTP Hjdpfxsy Rlp Eo Af Aenr Aquatron dampening

Condition: used, Year of construction: 2005, operating hours: 43,868 h, functionality: fully functional, machine/vehicle number: 054111169, FOR SALE: USED HEIDELBERG CTP, FULLY FUNCTIONAL WORKING HOURS: 43,868 Hodpfx Ajy Sywajf Asnr CURRENT WORKING HOURS: 14,781 EXPOSURE HOURS: 9,728 PLATES PRODUCED: 164,041

Year of construction: 2016, condition: ready for operation (used), - USED - 7-AXIS TWIN-SPINDLE CNC LATHE MAX ROTATING DIAMETER: 800 mm MAX TURNING LENGTH: 350x2 mm MAX TURNING DIAMETER: 300 - 390 mm BAR CAPACITY: 76 mm SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 COUNTER SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 X1-AXIS TRAVEL: 255 mm X2-AXIS TRAVEL: 190 mm Y-AXIS TRAVEL: ± 60 mm Z1-AXIS TRAVEL: 800 mm Z2-AXIS TRAVEL: 900 mm RAPID FEEDS X-Y-Z: 20 - 7,5 - 24 m/min DRIVEN TURRET HEAD: 12 ; 12 POS; 4000 ; 4000 rpm; 5,5 ; 5,5 kW CONTROL UNIT: FANUC 31i-B WEIGHT: 12700 Kg OVERALL DIMENSIONS: 4050 x 2210 x 2480 mm Hsdpfx Aeyyd Ulof Ajnr ACCESSORIES: SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Leadwell CNC lathe Model LTC - 20 AP Year : 1995 Working lenght : 550 mm. Max. working diameter : 300 mm. Spindle borer : 62 / 52 mm. Number of tools : 12 pcs. X-axis travel : 175 mm. Z-axis travel : 600 mm. Control : Fabuc O-T Hsdpjxqcqqsfx Af Aenr 3-jaw chuck Tailstock Tool-Setter Tool posts Interface RS-232 C Tool locker Chip conveyer Coolant

Condition: ready for operation (used), Year of construction: 2012, operating hours: 18,699 h, functionality: fully functional, machine/vehicle number: 1095132, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 457 mm, table length: 1,321 mm, TECHNICAL DETAILS Travel X-axis: 1,270 mm Y-axis: 508 mm Z-axis: 635 mm Table Length: 1,321 mm Width: 457 mm Max. load: 794 kg Spindle Speed: 12,000 rpm Drive system: Inline Direct Drive Power: 22.4 kW Max. torque: 122 Nm at 2,000 rpm Feeds Rapid traverse X / Y / Z: 35.6 m/min Max. cutting feedrate: 21.2 m/min Hnedoxb Uhijpfx Af Asr Tool Changer Capacity: 24+1 Type: CT 40 Max. tool diameter: 76 mm Tool-to-tool time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Dimensions Height: 3,023 mm Width: 3,886 mm Depth: 2,667 mm Operating Hours Cycle start time: 18,699 h Power-on time: 23,179 h EQUIPMENT 40 + 1 position tool changer, BT40 High-pressure spindle coolant 63 bar (TSC 1000) Coolant tank 360 liters Chip conveyor, spiral type 4th axis HRT 210, 210 mm including tailstock Wireless Intuitive Probe System (WIPS R) Renishaw OTS tool setter Renishaw measuring probe Intuitive Programming Screen (IPS) Programmable coolant nozzle (P-Cool) Approx. 15 tool holders

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS X-axis travel: 235 mm Z-axis travel: 1,144 mm Turning length: 1,000 mm Turning diameter: 300 mm Swing over bed: 450 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Hnsdpfx Afexxi Ulj Asr Spindle bore: 68 mm Tool holder: VDI 40 MACHINE DETAILS Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter 250 mm Touch setter Tailstock

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,810 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Y-axis: 1,144 mm, rotational speed (max.): 4,500 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 300 mm Spindle bore: 68 mm X-axis travel: 235 mm Z-axis travel: 1,144 mm Turret: 12 stations – all driven Spindle speed: 45 – 4,500 rpm Tool holder: VDI 40 MACHINE DETAILS Power-on time: 33,509 h NC run time: 10,810 h Spindle run time: 9,643 h Control: OSP P300L-R Hnsdsx Exqfspfx Af Asr Weight: 6,300 kg Required footprint: 3.55 m x 2.35 m x 1.93 m EQUIPMENT Chip conveyor Chuck (diameter: 250 mm) Touch setter Tailstock

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine register BST camera control system unwinder semi rotary uv flexo chamber no.1 semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting rewinder max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm Hnedpowgittsfx Af Aer max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Condition: good (used), Year of construction: 1987, Travel X/Y/Z 400/250/375 mm, 18 speed 80 - 4000 U/min, motor 2,2 KW, spindle SK 40, control MAHO CNC 232, table size 700x270 mm, hydraulic tool clamping, coolant device, spash guard, 20 tool holders with tools, tool setter, machine vice GOODJ 125 N, clamping set, machine feet, several tools, manual Hnedpfx Afelu Hpgj Ajr

Condition: good (used), functionality: fully functional, For Sale: Takisawa EX-110 CNC Lathe + LNS Bar Feeder, Year 2004 A Japanese-made Takisawa EX-110 CNC lathe in good condition, equipped with an LNS bar feeder. Specifications: - Control: Fanuc 21i-TB - Max turning diameter: 400 mm - Max swing over bed: 495 mm - Max turning length: 710 mm - Bar capacity: 75 mm - Spindle speed: 30–3,500 rpm - Spindle power: 18.5 kW Hjdpjyrgggefx Af Aenr - Turret positions: 12 - Chuck size: 250 mm (A2-8") - Rapid traverse X/Z: 16/20 m/min - Weight: approx. 5,000 kg Included equipment: LNS bar feeder, tailstock, chip conveyor, tool setter, coolant system. Further information and pricing upon request. 📞

Condition: good (used), Year of construction: 2011, functionality: fully functional, SCREEN/FUJI/AGFA MA-L8800II AUTOLOADER (no CTP) first installed 2011 to use with SCREEN PT-R 8XXX & OEM CTP-Imagesetter 3 plate cassettes with100 plates/each incl. Grafoteam MDT48 conveyor All offers are subject to prior sale. Hnedpfx Afoyuygls Asr

Condition: new, Year of construction: 2026, 1. Xitron Navigator Harlequin-RIP/workflow-Kit (TIFF-only) v.14.xx LDK-version with USB-dongle 1-bit-tiff-RIP incl. software download and license code for all CtP-Systems with 1-bit-tiff shooter Hsdsdhn Dtepfx Af Aonr 2. Xitron Navigator Harlequin-RIP/workflow-Kit v.14.xx LDK-version with USB-dongle 1-bit-tiff-RIP incl. software download and license code USB-BlueBox-Interface for nearly all CtP-Systems without 1-bit-tiff shooter 3. RasterBlaster 1-bit-tiff shooter All offers subject to prior sale

Condition: used, Year of construction: 2019, operating hours: 40,000 h, functionality: fully functional, CTP SCREEN PTR 8900N _ GLV 512 WORKFLOW XMF 6.11 Complete Hedpfxsy Enwns Af Aonr

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes replaced; major maintenance package carried out approx. one year ago (machine has not been in operation since)! TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Bar capacity: 80 mm Mounting: MT5, revolving tailstock Without center Turret: 12 stations, bolt-on turret Overhang for driven tools: ±100 mm Assemblies: Integrated MK4 bearing for live center Chip and coolant system: Scraper-type chip conveyor with magnetic separator, discharge height approx. 1,000 mm Coolant system: high pressure 5 bar, pump 800 W, delivery rate 20 l/min Coolant shower at chuck, including high-performance pump Compressed air blow-off system for tool holder sleeves Compressed air blow-off system for tailstock live center Line filter for coolant system MACHINE DETAILS Hnedpfxoy A Icrs Af Ajr Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal beacon: red, yellow, green, blue EtherNet/IP interface for automation Robot interface for portal robot DMG Mori Seiki Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Note: The machine is supplied without a chuck, tool pre-setter, or workholding devices.

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Inspected and tested. Hnedpedtr A Tjfx Af Aer

Condition: new, Year of construction: 2018, functionality: fully functional, Standard technical data: Swing diameter over bed: 580 mm Swing diameter over carriage: 470 mm Maximum machinable diameter: 360 mm Max. workpiece length: 250 mm Traverse (X): 260 mm Traverse (Z): 350 mm Traverse (Y): 100 mm (+/- 50) C axis: 360 degrees (0.001-degree increments) Spindle speed: 50-6,000 rpm Spindle nose: JIS A2-6 Spindle bore diameter: Ø62 mm Front spindle bearing diameter: Ø100 mm Turret type: M-V12 Number of tools: 12 Tool size: 20x20 mm Tool shank diameter: Ø32 mm Tool change time: 0.1 sec Driven tool speed: 45-6,000 rpm Rapid traverse (X): 25 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 12.5 m/min Main motor power (15 min/continuous): 11/7.5 kW (PREX) Driven tool motor power: 5.5/3.7 kW (PREX) Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm Machine weight: 4,050 kg Control: OSP P300L Standard specification: 1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L CNC Controller, including CE mark & EMC 1 set European Standard Specification 1-1. V12 radial turret head, 1 set 1-2. Spindle, 1 set (1) Spindle speed: 50-6,000 rpm (1 set) (2) Spindle motor PREX 11/7.5 kW (1 set) (3) Spindle: JIS A2-6; bore Ø62 mm (1 set) (4) C-axis control, 360 degrees (0.001-degree increments) (1 set) (5) SR1146 hydraulic cylinder for chuck (1 set) 1-3. MT4 tailstock 1-4. Dual-action foot pedal for chuck and tailstock side, 2 sets 1-5. Driven tool motor PREX 5.5/3.5 kW (2 min continuous) 1 set 1-6. Driven tool speed: 45 - 6,000 rpm, 1 set 1-7. Work area lighting, 1 set 1-8. Full enclosure, 1 set 1-9. Chip tray, 1 set 1-10. Door interlock, 1 set 1-11. Lubrication monitoring, 1 set 1-12. Automatic chuck open/close on main spindle, 1 set 1-13. Chip air blow, 1 set 1-14. Foundation bolts, 1 set 1-15. Tool setter, 1 set 1-16. CE marking, 1 set 1-17. IEC standard compliance, 1 set 1-18. Transformer, 1 set 1-19. Coolant system with 250W pump, 1 set 1-20. OSP-P300L CNC control with 15" color touchscreen monitor, 1 set 1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set) * Multitasking machines coordinate conversion (1 set) * Multitasking machines profile generation (1 set) * Advanced One Touch IGF (graphical programming assistant with dialogue-based interface) (1 set) * Real 3D simulation (1 set) * Cycle time monitoring (1 set) * Load monitor (1 set) Hsdpjy H H Afsfx Af Ajnr * NC operation monitor (1 set) * Cycle time reduction function (1 set) * Hi-Cut Pro (machining-specific servo optimization) (1 set) * Variable spindle speed control (1 set) 1-22. 2-stage position indicator lamp, 1 set 1-23. Program storage: 2GB, 1 set 1-24. Operation memory: 2MB, 1 set 1-25. Spindle orientation, electric, 1 set 1-26. Inch/metric conversion, 1 set 1-27. Ball screw pitch error compensation on X/Z axes, 1 set 1-28. Workpiece ejection monitoring, 1 set 1-29. Lifting hooks, 1 set 1-33. TAS-C thermal compensation on the frame 6” chuck Chip conveyor

Condition: refurbished (used), Year of construction: 2014, turning diameter over cross slide: 480 mm, turning length: 680 mm, turning diameter: 410 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 290 mm, travel distance Z-axis: 750 mm, spindle motor power: 22 W, Brand: Hyundai-Wia Model: L-300/MSA Hedpfjx Elzkex Af Ajnr Category: CNC Lathes Year of manufacture: 2014 CNC Control: FANUC Series 32i-Model A Machine weight: 7,000 kg Machine dimensions: Length: 4,780 mm Width: 2,055 mm Height: 2,000 mm Capacity: Maximum swing over bed: 750 mm Maximum swing over carriage: 480 mm Maximum turning diameter: 410 mm Maximum turning length: 680 mm Bar capacity (spindle/sub-spindle): 76 mm / 65 mm Travel: X-axis: 290 mm Z-axis: 750 mm ZB-axis: 700 mm C-axis: 360° (minimum indexing angle: 0.001°) Spindle: Spindle diameter: 254 mm Spindle speed: 3,500 rpm Spindle nose: ASA A2-8 Spindle motor power (max./cont.): 22/18.5 kW Minimum C-axis control angle: 0.001° Sub-spindle: Sub-spindle diameter: 210 mm Sub-spindle speed: 4,000 rpm Spindle nose: ASA A2-6 Sub-spindle motor power (max./cont.): 11/7.5 kW Minimum C-axis control angle: 0.001° Turret: Turret stations (live tool capable): 12 Live tool speed: 4,000 rpm Live tool motor power (max./cont.): 5.5/3.7 kW Turning/boring tool dimensions: 25x25 mm or 50 mm Rapid traverse: X / Z axis: 20,000 mm/min Z axis: 24,000 mm/min Accessories and additional features: Chip conveyor Coolant tank with 20 bar high-pressure wash pump Automatic tool setter with push button and M code (down/up) Various live and static tool holders included Comprehensive documentation: manuals, electrical diagrams, CE declaration

Condition: used, Drill chucks Screwing chucks with adjustment for bolt dies Collet chuck ER 25 Collet chuck ER 32 Collet chucks OZ 2-16 adjustable MK1 MK2 Hjdjdbmxzepfx Af Ajnr MK3 MK4 MK2 adjustable E1 12 E1 16 E1 20 E1 25 E1 32 E1 40 E2 6 E2 10 E2 12 E2 16 E2 20 E2 25 E2 40 B2 B3 B7 Tool setter C1 C2 C3 Boring tool Capto C3 straight Capto C3 tilted

Year of construction: 2018, condition: excellent (used), functionality: fully functional, 2 pcs. used stainless steel trolley for loaders setters holder, MFG 2018; together with 12 pcs. aluminium with canvas made setters. The dimensions of the stainless steel trolley are: L 2.000 mm x W 600 mm x H 2.000 mm The dimensions of each belt is about: L 1.900 mm x W 560 mm Trolleys of such type are used to provide the fermentation process of dough batches placed on loaders. Made of stainless steel. Hnsdpfx Aoywculjf Aor All trolleys are produced on order. Two folding arms are installed for easy load. Very good condition. Price Euro 1.200 + VAT for each trolley with 12 setters, negotiable. Delivery condition, FCA: Oradea/Romania If you’ll buy both of them in package: price in Euro 2.000 + VAT, negotiable. Delivery condition, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Model / description: “MAGNUS 400 FIBER, SHIPPABLE KMAT” (Creo label) Serial: M41243 Manufactured: June 2008 Power (platesetter): 200/210/220/230/240V, 16A, 50 Hz (on the label) Laser safety: marked Class 1 laser product (normal for enclosed CTP systems) Max plate size: about 685 × 762 mm (around drum × along drum) Min plate size: about 300 × 228 mm Resolution: up to 3048 dpi Throughput: often listed around ~16 plates/hour (depends heavily on plate type + sensitivity and configuration) Machine size / weight: roughly 135 × 176 × 145 cm, ~750 kg The Magnus 400 Fiber system with Shippable KMAT configuration is a professional industrial imaging solution designed for high-precision production environments. This type of equipment is commonly used in the printing and graphic industry for processing and imaging printing plates with high accuracy and consistent performance. The system is built for reliable operation in industrial facilities where stable production processes and dependable equipment are essential. Machines of this type are widely used by printing houses, packaging manufacturers and companies involved in graphic production workflows. The system includes industrial electronic components such as the Hu.q CSG-86 module, manufactured in July 2006, operating at 200–240 V AC, 50/60 Hz with CE and UL certification. These components are designed for long-term operation in demanding industrial environments and ensure stable system performance. Hnodpoyxl N Iefx Af Ajr The Magnus 400 Fiber CTP system is suitable for companies that require dependable equipment for plate imaging and preparation within professional printing and industrial production environments. The machine can be inspected on site and prepared for shipment. Loading and international transport can be arranged depending on the buyer’s,