Used Ctp for sale (50)

Condition: new, Year of construction: 2026, U1150073-10 Second-Hand Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, >380 mA U1150073-10 new, orig. Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel 100262642V00 new, orig. Block LD (Gold, 3 pin, 5.6 V) for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, CTP ᐳ2013 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, new 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, second hand Njdpfx Ajb Uptcsi Aolh U1254024-01 Trailing Edge Clamp Unit, "new" (Screen PT-R4xxx & OEM) PlateRite 4xxx, Luxel T6xxx, Acento, Avalon N4, Topsetter 74/P S100096323V02 orig. Tail Clamp 8RE Set, "new" (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF S100096323V02 orig. Tail Clamp 8RE Set (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF "refurbished" with orig. Screen parts All other diodes and clamp sets on request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Nlodpfxozh Dtze Ai Aoh Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Year of construction: 2005, condition: good (used), machine/vehicle number: 756, Thermal CTP PT-R4300 (Computer to Plate) Recording System: External Drum PST 26 Plate Stacker Glunz & Jensen Interplater MP 85: Thermal Plate Processor Technical Details: Throughput option (plates/h in max. format) : 20 Plates / Hour Light Source: 32-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Nlodpfx Aisfh Dmzs Aoh Technical data can vary according to job, consumables and possible other factors

Condition: used, Thermal Laser CTP Amsky Ausetter T 424 with only 7066 Plates produced. Thermal Laser CTP Amsky Ausetter T 424 Thermal Belichter / Thermal Laser Plate Size min. 300 x 400mm - max. 660 x 800mm 2400DPI  24 Channel Laser Plate Thickness 0.15 - 0.30mm Manual Plate Loading Include RIP and Compressor Geschwindigkeit / Speed max. 15 Plates/per hour Nur 7066 Platten Belichtet / Only 7066 Plates produced Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Nledpfx Aisyllbpo Aoh On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Model / description: “MAGNUS 400 FIBER, SHIPPABLE KMAT” (Creo label) Serial: M41243 Manufactured: June 2008 Power (platesetter): 200/210/220/230/240V, 16A, 50 Hz (on the label) Laser safety: marked Class 1 laser product (normal for enclosed CTP systems) Max plate size: about 685 × 762 mm (around drum × along drum) Min plate size: about 300 × 228 mm Resolution: up to 3048 dpi Throughput: often listed around ~16 plates/hour (depends heavily on plate type + sensitivity and configuration) Machine size / weight: roughly 135 × 176 × 145 cm, ~750 kg The Magnus 400 Fiber system with Shippable KMAT configuration is a professional industrial imaging solution designed for high-precision production environments. This type of equipment is commonly used in the printing and graphic industry for processing and imaging printing plates with high accuracy and consistent performance. The system is built for reliable operation in industrial facilities where stable production processes and dependable equipment are essential. Machines of this type are widely used by printing houses, packaging manufacturers and companies involved in graphic production workflows. The system includes industrial electronic components such as the Hu.q CSG-86 module, manufactured in July 2006, operating at 200–240 V AC, 50/60 Hz with CE and UL certification. These components are designed for long-term operation in demanding industrial environments and ensure stable system performance. Nledpfeyxl N Ijx Ai Aoh The Magnus 400 Fiber CTP system is suitable for companies that require dependable equipment for plate imaging and preparation within professional printing and industrial production environments. The machine can be inspected on site and prepared for shipment. Loading and international transport can be arranged depending on the buyer’s,

Condition: good (used), Heidelberg GTOV 36x52cm + Mako 2 CTP Nodpfxjy Rlp Ee Ai Aelh Aquatron dampening

Condition: used, functionality: limited functionality, Year of construction: 1982, Maximum Cutting Thickness: 16 mm (approx. 5/8") for mild steel. Maximum Cutting Width: 3150 mm (approx. 10.3 feet). Nlsdpfxoykl Nkj Ai Ash Total Machine Weight: Approximately 24,000 kg (24 tons). Cutting Angle: Fixed at 2°. Drive Type: Mechanical drive with a robust, rigid frame construction. Hold-down System: Typically features hydraulic hold-downs to secure uneven sheets during the cutting process.

Condition: excellent (used), Professional measuring device from the renowned manufacturer TECHKON on offer – model SpectroPlate. The equipment is intended for quality control of printing plates in the printing industry. Key Information: Manufacturer: Techkon GmbH (Germany) Model: SpectroPlate A801070 Type: Densitometer / printing plate measuring device Nljdpfx Asz Smy Esi Aeh Application: quality control, exposure and CTP plate parameter measurement Power: power supply included Condition: used, fully functional Equipment Included: Techkon SpectroPlate meter original power supply all items as shown in the photos Condition: The device has been used and exhibits normal signs of wear, but it is in good condition and ready for operation.

Condition: used, Year of construction: 2004, Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP plate exposer - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi Njdpfowv D T Tox Ai Aelh - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output capacity: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Robust construction for prepress department

Condition: used, Year of construction: 2013, machine/vehicle number: 0602-260025, The MicroStep MasterCut Compact P 6001.20 is a compact and powerful CNC plasma cutting system designed for the precise processing of sheet metal on a work surface measuring up to 6,000 × 2,000 mm. The gantry-style system is equipped with a Kjellberg HiFocus 161i fine plasma torch, an automatic gas console, and Contour Cut Speed technology. Maximum positioning speed of 35,000 mm/min. Nljdpfx Aijzq E A As Aoh

Condition: used, NMNE 40 872 317 NMNE 40EA596 376 Stainless steel pump housing with screw Hygiene version with bearing housing Stator NEMO LASI S65l d11027327001 Motor 7.5 kW, 1425 rpm / 250 rpm Inlet DN50 (± 400mm) Outlet connection DN 30 (± 400mm) Nlsdpoz Rnzaofx Ai Ash Dimensions: (L x W x H): ± 2.400 x 500 x 600 mm

Condition: used, Year of construction: 2000, • Max. imaging format: approx. 505 × 525 mm Nodpfowv Ea Uox Ai Aslh • Max. film width: approx. 530 mm • Material thickness: up to approx. 0.10 mm • Resolution: up to 200 lpi (256 grayscale levels), optionally up to 400 lpi with Delta Technology • Accuracy: ± 0.2 mil (0.005 mm) across the entire image area and with multiple films • Speed: up to approx. 1,320 mm/h film length • Interfaces: High-Speed Bitmap/SpeedWay Interface, RIP connection • Power supply: 100–240 V AC, 47–63 Hz (single-phase RIP), main unit 3-phase supply • Dimensions (L × W × H): approx. 1,200 × 750 × 1,100 mm • Weight: approx. 250–300 kg • Operation: daylight-loading, exposes film or RC paper, optional CTP plates (polyester)

Condition: used, Sheet width: 2500 mm. Plate thickness: 10 mm. Distance between columns: 2700 mm. Throat: 400 mm. Total power requirement: 20 kW. Weight of the machine: Approximately 10,500 kg. Dimensions: Approximately 3800 x 2200 x 2000 mm. Nledpfeykl I Hex Ai Aoh Control type: Typically conventional/manual control.

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer stainless steel tank trailer for bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR suitable for the transport of dangerous goods * ADR tank code ADR tank code L4BH * Tank diameter 2,000 mm * External length 11,250 mm * Height 3,600 mm * Axle distance (Wb) 6,300 mm * Axle distance (A) 1,310 mm * Rear overhang 3,580 mm * Fifth wheel height 1,220 mm TECHNICAL CAPACITY: * Volume 32.0 m3 Nleder I S H Espfx Ai Ash * Empty weight ±%3 6,400 kg * Axle load 27,000 kg * King pin capacity 12,000 kg * The operating temperature is 250 °C * Test pressure (+H bar) 4.0 bar * The operating pressure is 2.0 bar * Total weight 39,000 kg TANK: * Cylindrical tank container with a slope to prevent residual quantities in the tank, made of AISI 321 (DIN 1.4541) stainless steel with ADR code L4BH * Vacuum valve The operating pressure is 0.21 bar * 1 x thermometer is included * Number of chambers 1 compartment * Insulation thickness The container is insulated with 100 mm thick glass wool * Insulation lamination Aluminum coating, CTP bomb * Final bottom coating The insulation on the front and rear bottom of the tank is coated with glass fiber reinforced polyester (GRP) * Stainless steel insulation rings fitted on the entire tank container * Number of manholes 1 pc. * 2" side air line made of aluminum on the right side of the vehicle. 2" TW coupling air line is included at the rear. * 1 x pressure gauge is included on the side air line * Equipped with a 1.5" air line for a higher delivery rate for bitumen and * to free the hoses from residues of the transported goods after unloading * 2" upper air line with 2-way sliding valve made of stainless steel * Aluminium walkway on the dome area * Mechanically foldable fall protection on the walkway in accordance with UVV * Access ladder on the right side of the container * The filling dome is on the front of the tank * There are 4 baffles in the tank DRAIN SYSTEM: * There is a DN100 bottom valve with handwheel operation on the discharge line, in accordance with the EN 14433 standard for dangerous goods. * Outlet line According to standard EN14433, outlet line starts with 4" bottom valve with handwheel control and leads to a 2nd safety valve for safe unloading (according to standard EN14432, 4" butterfly valve with mechanical control) and ends with a 3" TW coupling with internal thread and blind cover. A 1/2" sampling tap is included between the butterfly valve and TW coupling. * 1 x 6 m hose holder in an open-top box made of aluminum CHASSIS: * BPW axle with air suspension and disc brake and 3 x 9 tonnes permissible load capacity * BPW axles with 22.5" disc brake * Lift axle system on the 1st axle works automatically * KNORR-ILVL electronic air suspension ECAS * Tire size 385/65 R 22.5" 6-way * ALUMINUM rims * 1 x work light on the tank * Jost supports * 1 x plastic tool box, 400x480x600 mm OTHER: * ADR - Signum brand plate made of stainless steel, with a set of interchangeable numbers and foldable design * Danger sign in rigid design * Danger sign no: 3 * Danger sign no: 9 * Temperature sign * Environmental protection sign * 2 x fire extinguisher box without Fire extinguisher COLORS: * Chassis color RAL 3002 carmine red * Container color RAL 9006 white aluminum + paint We are happy to provide you with further information

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Nlsdpfodtr A Tsx Ai Aeh Inspected and tested.

Condition: used, type pump : Waukesha 320 U2 all stainless steel pump housing 2 gears all stainless steel dimensions (l x w x h) : ± 1.700 x 600 x 900 mm loading height ± 600 mm discharge height: ± 600 mm inlet and outlet DN 150 3 x 400V 50 Hz Nodpfx Aijzza Emo Ajlh 11kW, 1500 / 123 rpm

Condition: used, MIG/MAG pulsed gas shielded welding machine FRONIUS, Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Power: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 50 volts Open-circuit voltage: approx. 30 volts Mains connection: 400 volts, 50 Hz, 32 amps, plug - Digital display for voltage and current - Pulse function - Various welding programs can be selected Welding processes: MIG/MAG/TIG (program and manual operation) 2-cycle, 4-cycle, 4-cycle special and spot welding - Separate 4-roller wire feeder FRONIUS, Type VR 152, with connecting hose package approx. 1.5 meters - 4 meter hose package NEW, with central connection FRONIUS - External FRONIUS water cooling unit, Type FK 71 - Welding gas pressure regulator NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration The unit is also suitable for TIG and electrode welding. Nsdpfoyxy Tbox Ai Aslh Additional equipment for TIG and electrode welding is not included in the scope of supply.

Condition: used, functionality: unexamined, For sale: Motor for electric trimmer CHALLENGER II TRIMMER by FOOD INDUSTRY EQUIPMENT INTERNATIONAL I.N.C. Model CTPS1. Net price per unit: €800. We have 5 units available. Nlsdpfx Ajyuqrxoi Aoh

Condition: used, Used VEM three-phase asynchronous motor with 15 kW power, IE3 efficiency class, and B5 flange mounting. Manufacturer: VEM motors GmbH Type: IE3-W41R 160L 4 C TPM HW Motor number: 414123 / 0033 H Motor type: Three-phase asynchronous motor Year of manufacture: 11/2017 Rated power at 50 Hz: 15 kW Rated speed at 50 Hz: 1490 rpm Rated voltage at 50 Hz: 400 / 690 V Connection at 50 Hz: Delta / Star Rated current at 50 Hz: 28 / 16.5 A Frequency: 50 Hz Power factor cos φ at 50 Hz: 0.83 Efficiency at 50 Hz: 92.8% Efficiency class: IE3 Number of poles: 4 Frame size: 160L Design: IM B5 Nedpfx Aijzugakj Aelh Degree of protection: IP55 Thermal class: 155 F/B Weight: 175 kg Bearing, drive end: 6310 ZZ C3 Bearing, non-drive end: 6309 ZZ C3 Standard: IEC/EN 60034-1 Condition: used Location: Altenglan

Condition: new, Year of construction: 2025, functionality: fully functional, Dear customers, To ensure quick and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Right-hand execution with connection diameter: 350 mm with flange JET cleaning system Motor power: 11.0 kW Filter area: 50.2 m² Nominal volume flow: 6927 m³/h Maximum volume flow: 8000 m³/h Nlsdpfx Aoy T Rdmei Aeh Negative pressure at 20 m/s in the intake nozzle: 3162 Pascal (in dusty condition) Collection volume: 4 x 160 liters 5-meter connection cable with 32A CEE plug

Condition: new, Year of construction: 2025, functionality: fully functional, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. Nlodpfx Aisy T Rg Ij Ash This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! A frequency converter with a pressure transmitter automatically adjusts the fan’s output to the actual demand. Right-hand design with connection diameter: 350 mm, including flange JET cleaning system Motor power: 15.0 kW Filter area: 50.2 m² Nominal volume flow: 6927 m³/h Maximum volume flow: 10000 m³/h Underpressure at 20 m/s in the intake nozzle: 3620 Pascals (in a dusty state) Collection volume: 4 x 160 liters 5 meters of connection cable with a 32A CEE plug.

Condition: ready for operation (used), Measuring head similar to Movomatic TP 2495 shaft Ø 20 mm thread Ø 6.7 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Nljdpfx Astxuhrei Aoh

Year of construction: 2025, condition: as good as new (ex-display), Thanks to the AULUMA EXACT, all common double-knife and standard knife blades as well as hedge trimmers can be resharpened quickly and efficiently in highest quality. Width 3m (maximum blade length in one clamping 2.4m). Versatile Adjustment and Infinitely Variable Grinding Angle This enables grinding of all common types of knives. The knife is fixed clamped and does not need to be adjusted again. The grinding angles of 2 knives may be preselected and changed by means of a quick change switch. The angles can be easily read off via scales. The grinding depth can also be adjusted infinitely. Nljdpfxsgvvxrj Ai Ajh Precise Guidance of the Grinding Machine Thanks to the predefined motion sequences, a constant, uniform grinding can be achieved very quickly. The blades maintain their straight shape – whereas freehand sharpening will damage the knives over time as they lose their shape. Zero-backlash Movements Due to Special Rollers with Ball Bearings Due to the special and robust design, there is almost no wear. The rollers and guides are galvanized and fit together perfectly – allowing for easy and zero-backlash movements. Incl. High-quality Angle Grinder From BOSCH and Special Grinding Wheel The variable speed angle grinder can be easily disassembled and thus used for other purposes. The special ceramic grinding wheel helps to avoid burning of the blades.

Condition: new, A complete pallet production line. Number/Pos Part no/Name/Quantity 1/OKKR-100/Opti-Cutter Magasin/L=3000mm/1 2/RON120/Block feeder carousel/1 3/OM-1500EL/Leg Machine/1 Nedpfxjwduuds Ai Aolh 4/LP-OM/Leg positioning system/1 5/D-1000EL/Deck Machine/1 6/KTR-1006/Chain conveyor L=6000/1 7/GRG/Gantry Robot mechanical Gripper/1 8/SMS-1000EL/Assembly Machine/1 9/HKR/Automatic corner cutting machine/1 10/KTR-1004/Chain conveyor L=4000/1 11/ROB-G/Robot with mechanical gripper/1 Average capacity: 1500 pallets/8 hours (800x1200 mm pallet with max 6 deck boards) Maximum capacity: 1900 pallets/8 hours (800x1200 mm pallet with max 6 deck boards)

Condition: used, Year of construction: 2007, functionality: fully functional, ECRM MAKO 8 CTP — Specification | MAKO 8 Type | CTP 8-page Laser Technology | Violet 405 nm, single beam - 120Mw Njdpfozxzm Tjx Ai Aolh Compatible Plates | Violet photopolymer and silver halide Maximum Plate Size | 824 × 1,143 mm Minimum Plate Size | 254 × 254 mm Plate Thickness | 0.15 to 0.30 mm Resolutions | 1,800 to 3,556 dpi depending on the media Productivity | Up to 15 8-page plates/hour at 2,540 dpi Reported Repeatability | 0.025 mm typical over 6 consecutive separations Positioning Accuracy | ±2 µm with the Precision Drive System Image Scaling | 85 to 110% Workflow | TIFF 1-bit compatible via CtServer Output | Online connection to processor The machine therefore accepts a very wide range of formats, from 254 × 254 to 824 × 1,143 mm, which allows it to handle both small formats and genuine 8-page plates. Exposure/Mechanical Section The MAKO 8 uses a 405 nm violet laser. ECRM states that the single beam can be calibrated according to the sensitivity of the plate. The maximum resolution of 3,556 dpi also allows for the use of demanding screening techniques, including stochastic screening. The system is mechanically quite interesting: the plate is positioned on a pin-bar registration system and then moved under the laser head by the Precision Drive System. The documentation specifies a positioning control of ±2 µm. The registration system is interchangeable to accommodate notches corresponding to the presses used, which aims to improve plate/press registration and reduce setup time. Dimensions and Installation Width: 1,066.8 mm Depth: 2,448.6 mm Total Height: 1,892.3 mm Weight: 409 kg Power Supply: 100–240 V single-phase, 50/60 Hz Maximum Power Consumption: 250 W / 3 A Thermal Dissipation: 850 BTU/h Operating Temperature: 17 to 30 °C Relative Humidity: 45 to 65%, without condensation