Used Cut To The Length Line for sale (51,169)

Year of construction: 2002, condition: used, linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis -Manufacturer: RK Rose Krieger, linear unit -Type: 70130100700 210792 /20 -Travel: 500 mm -Shaft: Ø 8 x 25 mm -Dimensions: Ø 30 x 725 mm Iodpouzn Htsfx Aaajtp -Weight: 1.7 kg

Condition: new, Year of construction: 2025, power: 12 kW (16.32 HP), Model: MasterLINE-3015 / 12 kW Configuration: High Performance CNC System: TWINCUT® CNC 21” S80 EtherCAT Control System CAD/CAM Software: ACCURL iCut Expert Cut Laser Generator: RAYCUS Laser Source 12 kW RFL-C12000S-CE Laser Cutting Head: ACCURL BLT 6X2 cutting head (Auto Focus) Servo Motor/Drive: Germany REXROTH Itsdpfx Aajw I T D Doaop Motoreducer: Germany ALPHA X/Y-axis Rack: Germany ALPHA Level 6 precision Linear Guide: Germany REXROTH Chiller: TONG FEI / HANLI from China High-pressure Valve for N₂ & O₂: Germany BURKERT & Japan SMC Proportional Valve: Japan SMC

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. Isdpfx Aaoiyyc Ejaetp More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Isdpfshzbipox Aaaotp Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Year of construction: 2009, condition: good (used), Cutting width: max 1.150 mm Feeding height: max 140 mm Feeding depth: max 1.150 mm Equipment • model "S-Line" • air table chrome-plated • side table right with air • side table left with air • light barrier • 2 knives 1st station: stack lift Type: Profiline Model: PL10-100-H Machine number: P-6752047 Rebuilt: 2009 2nd station: jogging table Type: Profiline Model: 0077 Machine number: P-6759056 Rebuilt: 2009 Iodpfx Aon Nww Eeaaotp 3rd station: paper cutter Type: Senator 115 Model: TSC Machine number: M-115H-004-05/20-07 Rebuilt: 2009 4th station: unloader Type: RS Model: SR0559 Machine number: M-0520-004-07/10-07 Rebuilt: 2009

Condition: used, Year of construction: 2004, machine/vehicle number: 7441238, Schneidlinie Autotrimm PACE / Cutting Line Autotrimm Polar 137XT-AT PACE Schneidlinie Lift Rüttler Ablader / Cutting Line Lift Jogger UnloaderYear 2004 - Serial-No. 7441238 Schnittbreite / Cutting width max. 1370mm Autotrimm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table große-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10AStapellift / Stack Lift Polar LW 1000-4 Baujahr / Year 2004 - Serial-No. 7493313 Palettengröße / Pallet size max. 800 x 1.200mm Wannengröße / Size of platform 840 x 1.270mm Hub / Stroke max. 850mm Itsdpsiqvbmjfx Aaasp Tragkraft / Carrying capacity max. 1.000kgRüttelautomat Luftausstreichwalze / Automatic Jogger air-removing roller Polar RAH-4 Entladung zur Hintertischbeschickung / unloading for rear-table feeding Baujahr / Year 2004 - Serial-No. 7484103 Tischgröße / Size of table 900 x 1.150mm Ausschiebeformat / Pusher size . 750 x 1.140mm Lagenhöhe / Height of ream min. 30mm - max. 140mmStapelregal / Piling-board shelf Polar STR-1000-4 Baujahr / Year 2006 - Serial-No. 7475003 Format min. 420 × 570mm - max. 750 × 1.140mm Größe Regalboden / Size of shelf board 900 × 1.170mm Lagenhöhe / Height of ream min. 30mm - max. 140mm Tragkraft / Carrying capacity max. 600kg Anzahl Pufferplätze / Number of buffer spaces 5Ablader / Unloader Polar TR 130ER-4- Einsatzbereich / Application for Size min. 400 x 400mm - max. 780 x 1.120mm Nutzengröße / Label size min. 105 - 148mm Lagenhöhe / Height of ream min. 40mm - max. 165mm Stapelhöhe / Pile height max 1.300mm Tragkraft / Carrying capacity max. 200kgSpäneförderband / Waste Conveyor Busch Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive Ijdpfx Aovu Rvtsaastp -Manufacturer: Geze, spindle drive type E250/24V-DC EV 1 Ovp -Ident.-No.: 16 473 -Stroke length: 300 mm -Network: 24 V DC -Shaft: Ø 20 mm -Number: 3x linear drive available -Price: per piece -Dimensions box: 670/60/H45 mm -Weight: 1.8 kg/piece

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: MST 1500, For sale: Forster decoiling line Ijdjw R Tuuopfx Aaastp A Forster decoiling line is available for sale. This machine is ideal for anyone involved in sheet metal processing. Product details: - Model: MST 1500 - Year of manufacture: 1988 - Condition: used - Additional information: Control: SPS-F1 Sheet width: 1,250 mm Decoiling capacity: max. 2,000 kg Cutting: 1.00 x 1,250 mm steel 400 N/mm² If you are interested or require further information, please feel free to contact us. Take advantage of this opportunity to optimize your production with this machine!

Condition: used, Year of construction: 2007, automatic cutting and processing line for aluminium automatic loader multi-spindle milling centre Iodpjwwm Euofx Aaaetp electronic mitre saw with 550 mm blade automatic unloader

Condition: like new (used), Brand:Waco Iedpfx Aajh Ek N Asaotp Type:KS300 Complete cutting line Waco with 3 electropneumatic lengtstopper in and out feeding conveyor 3+2meter Techn info: Max saw balde 400mm Max cutting hight 70mm Motor 5,5kw, 400 volt, 50 Hz, 3 phase Electropneumatisc control of saw blade and length stopper, Stock no:2000596 Size for transport: Saw 120x105x215cm (lxwxh) Conveyors:300x80x35cm Total weightt:350 Kg

Condition: used, DIMENSIONS: HEIGHT 100 mm WIDTH 270 mm Ijdpfx Aasw E Eudsastp ELECTRONIC PUSHER LENGTH 6100 mm SAW BLADE MOTOR 4 kW

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 02/2009, - thickness of glass - from 3 to 12 mm, - maximum glass format 6100x3300 mm, - working height 950 mm +/- 30mm. ( adapted to the line), - overall dimensions (length x width x height) 8500x4300x1700 mm, - feed speed on belts up to 40 m/min, - glass feed speed on the cushion up to 40 m/min, - power supply voltage - 400V, 50Hz, - total installed power - 10 kW, - compressed air supply with a pressure of 7 bar, - maximum air consumption of 1100 NL/min, - glass presence sensor - OK. - automatic positioning of the glass sheet - OK. - RAL color - according to the order, - outer edges of the table made of hard wood, - table top covered with black felt with a thickness of 4mm, - guide and drive system protected against dirt, - guides and gear rails surface hardened, - on the bridge was mounted glass transport suckers, - on the bridge mounted stop buffers for manual cutting of glass. - the table has a solid frame construction, - the table is equipped with a system of sensors (electronic and mechanical), - top of the attachment covered with black felt with a thickness of 4mm, - oil during cutting dispensed automatically to both wheels simultaneously. - double-sided cutting, - breaking of the upper cut - breaking roller, - breaking of the bottom cut - breaking bar, - sheet separation - cutting knife, - adjustable parameters heating time; separation time, cutting delay - they depend on the thickness of the cut VSG. - heating of the cutting place - a set of radiators - max thickness of VSG glass - not exceeding 12mm in total, - max width of cutting 4000mm, Isdpfx Aaevdaf Ajaotp - working height adapted to the height of the table, - overall dimensions of the table (length x width) 1500 x 47000 mm, - glass transport speed - adapted to the table - total installed power ~ 17kW - supply voltage - 400V, 50Hz - compressed air supply with a pressure of 7 bar, - manual and automatic cutting function, IV. basic technical data of glass breaking station type.GS6-3/2 - the table has a solid frame construction, - the table has an air cushion to facilitate the movement of glass, - control of breakers and fan is done by pedals, - glass thickness from 3 to 12 mm, - max glass size 3300 x 6100 mm, - working height adapted to the height of the table, - overall dimensions of the table (length x width) 3600 x 6000 mm,

Condition: used, Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide for tool dispensing systems Itedou Sv Tvepfx Aaajp -Manufacturer: igus, linear drive type DryLin T from Achterberg Toolbase AK -Actuator: DLG 060-068.03 -Threaded rod: Ø 12 x 980 mm -Number: 8x linear drive available -Price: per piece -Dimensions: 1615/110/H120 mm -Weight: 5.5 kg/piece

Condition: new, Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel stop with micrometric fine adjustment. Slant adjustment of the saw blade up to 45° using a handwheel. Table opening ø190 mm with under-table suction. Milling stop 180 mm. Built-in milling spindle lock. Laying table with telescopic stop, eccentric clamp, degree grid 100% Made in EU (developed, built, quality tested) Technical data: Surface planing unit: Table width: 410 mm Table length: 1800 mm Planing shaft diameter: 100 mm Number of planing knives: 4 pieces Shaft speed: 5000 Motor output power: 5 kW S6 400V (4 kW S1) Thickness unit: Thickness passage, min/max: 4 - 230 mm Feed speed: 7 m/min Milling machine: Useful length of the spindle: 125 mm Height adjustment of the. Spindle: 160 mm Max. tool diameter when profiling: 180 mm when tenoning: 250 mm Spindle speed: 8000/6000/3500/1400 Table openings: 190 mm Integral stop: 500 mm Motor output power: 3.8 kW S6 400V (3kW S1) Circular saw: Format table: 2300 x 285 mm Saw blade diameter max/min: 315 mm/250 mm Incline position: 90° - 45° Max. cutting height: 90° 45 ° Saw blade 315: 102/72 Motor output power: 3.8 kW S6 400V (3kW S1) Weight: 900 kg Optional accessories: Reversible blade (no extra charge) Iedsvrvcajpfx Aaaotp Spiral planer shaft Long hole board Scoring unit

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires Ijdpfov Hm A Tsx Aaaotp - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: new, Year of construction: 2025, Max. cutting section mm. 610x30 / 520x100 / 420x150 Structure completely in painted steel of large thickness and reinforced. Solid anchoring system to the ground with flanged steel feet for the hole. Two-hand safety cutting controls in ergonomic position. Independent pneumatic adjustments to adapt to the different types of processing. Progressive starter compressed air in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. Cutting time adjustable from 0.5 to 2 sec. Cutting speed adjustable via pneumatic regulator on the control panel. CUTTING UNIT: Cutting unit with extremely robust horizontal plane, equipped with galvanized idle rollers with capacity 600 kg, diameter 89 mm, width 500 mm. Tilting cutting movement with power transmission via a group of belts. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. End-of-stroke shock absorbers. Swing with bearings. Motor anchoring with easy adjustment for perfect 90-degree cuts. Easy maintenance with easy access. Blade motor power HP = 14.8 (11 kW). HM circular blade, diameter mm. 600. Cutting edges Z = 108. Hole diameter mm. 35 Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on the control panel. Intelligent presser: Automatic adaptation to the thickness of the wood, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. Itjdpewk Iphjfx Aaaep The entire system is equipped with individual and independent pneumatic adjustments, external on the control panel, to adapt to the different types of work to be performed.

Condition: used, Linear drive, linear gearbox, lifting gear, transfer rail, conveyor rail -Linear drive: with toothed belt -Stroke: 2480mm -Drive shaft: hollow shaft Ø 14 mm -Note: without motor, can be included for an additional charge Itedpfxjii Sdzs Aaajp -Transport dimensions: 2800/150/H135 mm -Weight: 24kg

Condition: new, Year of construction: 2025, Max. cutting section mm. 280x95 / 240x125 / 340x15. Structure entirely in thick and reinforced painted steel. Solid ground anchoring system with flanged steel feet for the hole. Ijdpfxewk Hims Aaastp Ergonomic two-hand safety cutting controls. Independent pneumatic adjustments to adapt to different types of work. Compressed air progressive starter in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. CUTTING UNIT: Cutting unit with horizontal plane. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. Shock absorbers at the end of the stroke. Swing with bearings. Motor anchoring with easy adjustment for perfect 90 degree cuts. Easy maintenance with easy access. Solid ground anchoring system with adjustable steel feet with perforated flange. Blade motor power HP=7.5 (5.5 kW). HM circular blade, diameter mm. 500. Cutting edges Z=108. Hole diameter mm. 35 Adjustable cutting time from 0.5 to 2 sec. Adjustable cutting speed via pneumatic regulator on control panel. Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on control panel. Intelligent presser: Automatic adaptation to wood thickness, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on control panel, to adapt to the different types of work to be performed.

Condition: used, Linear drive, linear gear, lifting gear, spindle drive -Manufacturer: Festo, pneumatic linear drive type DGPL-18-1040-PPV-A-GF-B -Stroke length: 1040mm -Pmax: 8 bars Ijdpfx Aaeikrqcsajtp -Dimensions: 1190/51/H55 mm -Weight: 3 kg

Condition: new, Year of construction: 2025, COST CUTTING OPTIMIZER Superangle 600 is the ideal cutting center for angular and optimized cuts. A direct technological evolution of traditional cutting methods, Superangle 600 is able to increase productivity, guarantee maximum precision and maintain a simple and flexible process logic. EXTREMELY ROBUST Structure completely in thick and reinforced painted steel. Pusher support carriage mm. 300x345x25. Toothed belt width 50 mm. with 33 internal steel inserts. TECHNOLOGICALLY INNOVATIVE Electronic system consisting of a computer connected in real time to a latest-generation numerical control. Software in Windows environment. Itsdpfx Aajwk E Uujasp Complete with management of 5 qualities. 22” LED color video. Tele-service via internet. + Macro Excel. FAST Total optic system. Brushless electronic movement motor servo driver. Brushless electronic movement motor servo driver for angular cutting movement. Adjustable cutting speed. Two aligners. RELIABLE AND SAFE Transmission system with sliding on double tempered and ground guides. “Skf” ball bearing slides with double dust protection and automatic lubrication. Self-supporting electrical panel separated from the machine. Independent pneumatic adjustments to adapt to different types of processing. Maximum safety protection lock on the rear side.

Condition: used, Linear drive, linear gear, lifting gear, spindle drive, linear axis Iedjitv Dfspfx Aaaetp -Manufacturer: Festo, linear drive type DGE-25-500-SP -Stroke length: 500 mm -Servo motor: Festo type EMMS-AS-55-S-TM -Number: 5x linear drive available -Price per piece -Dimensions: 765/65/H150 mm -Weight: 5 kg/pc.

Condition: used, Year of construction: 2012, Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide Iodpfsu Sv Tiex Aaastp -Linear drive: stroke length 620 mm from Achterberg Toolbase AK -Actuator: DLG 060-068.01 -Threaded rod: Ø 12 x 615 mm -Number: 8x linear drive available -Price: per piece -Dimensions: 745/80/H80 mm -Weight: 1,7 kg/piece

Condition: used, Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120 SO -Stroke: max. 500 mm Isdsd At R Sopfx Aaastp -Piston: Ø 40 mm -pneumatically operated -p. Max. Pressure 8 bar -Number: 8x cylinders available -Price: per piece -Dimensions: 800/70/H100 mm -Weight: 5 kg

Condition: used, Linear drive, linear gear, screw jack, spindle drive -Manufacturer: Norgren -Type: M/46025B/M/320 -Stroke: 320 mm Itjdpfxed Hui Hs Aaajp -Piston: 25 mm -Dimensions: 520/70/H60 mm -Weight: 1.6 kg

Condition: used, Linear drive, linear gear, screw jack, spindle drive Isdpfx Ajdl U I Toaajtp -Manufacturer: ORIGA -Type: P120-25 -Stroke: max. 1310 mm -pneumatic: operated -p max.: 8 bar -Dimensions: 90/90/H1660 mm -Weight: 12 kg