Strand-pelletizing cutting length adjust

COMAC SG-100 SV

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Rcjdpfx Acoq R Tkwe Tsd Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: used, functionality: fully functional, machine/vehicle number: H2X393F01980, Year of construction: 2015, operating hours: 14,760 h, load capacity: 3,500 kg, lifting height: 3,550 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, construction height: 2,514 mm, power: 44 kW (59.82 HP), fork length: 2,300 mm, front tire type: cushion tires (black), front tire size: 27x10-12, rear tire type: cushion tires (black), rear tire size: 23x9-10, empty load weight: 4,850 kg, color: red, Equipment: CE marking, adjustable boom, cabin, lighting, Linde Forklift with Long, Plastic-Coated Forks VERSION: LINDE Diesel Forklift Model H35 D (3B) Load capacity: 3,500 kg at load center: 500 mm Series: 393-02 PEDALS: Dual pedal system Maximum driving comfort and optimal productivity through Linde dual pedal operation DRIVE AXLE TIRES: Super-elastic 27x10-12 STEER AXLE TIRES: Super-elastic 23x9-10 STANDARD LIFT MAST 188: Lift height: 3,550 mm Height overall: 2,514 mm Free lift: 150 mm CARRIAGE: 1,150 mm / 6 rollers / up to 3.5 t DRIVER'S CAB: Standard full cabin / overall height: 2,210 mm Full cab offers complete weather protection including: Roof window with wiper, front and rear windows with wipers, Metal doors with side windows DRIVER'S SEAT: Comfort seat, air-suspended, fabric cover Swivel function DRIVER'S STATION EQUIPMENT: Hot water heating Radio / Bluetooth® / USB / SD Panoramic interior mirror Exterior mirrors left & right Clipboard with LED lighting OPERATION: Central lever control LLC AUXILIARY HYDRAULICS OPERATION: Cross lever control AUXILIARY HYDRAULICS: Dual auxiliary hydraulics on vehicle side Standard dual auxiliary hydraulics on lift mast LIGHTING: Work lights, mounting positions 3 and 4, LED Two front-facing headlamps – top left and right Work lights, mounting positions 7 and 8, LED Two rear-facing headlamps – top left and right Switchable via roof console using 3-position switch (On/Off/Reverse mode) ENVIRONMENT: Dust cover mounted higher VEHICLE TECHNOLOGY: Tilt position preselection PAINTWORK: RAL 2002 Red ATTACHMENT: Rcedpfxjyr I Nio Ac Tjd Durwen Fork Positioner RZV 35 GS with separate side shift +/- 100 mm, with bolted, plastic-coated forks 2300 x 140 x 50 mm, Frame width: 1,150 mm Opening range (fork-arm to fork-arm): 490 - 1230 mm

Condition: good (used), 3 x 65 m³ aluminum silo (granulate storage silos) with long frame (used) Contents approx. 65,000 liters Diameter (inside) approx. 3,000 mm Total height approx. 12,000 mm Bulk density: 0.6 kg/dm³ Cone inclination: 90 degrees Connections in the topsoil: 1 vent nozzle with hood DN 200 1 flange nozzle DN 100 In the shell: 1 folding dome DN 450 1 filling pipe pulled downwards DN 80 Cone: The cone ends in a flange DN 150 with suction box otherwise as per sketch and photos Rcsdpfx Acevmidyj Tjd

Condition: like new (used), Manufacturer: V. Randwijks Rotor Dia.: 500mm Rotor Width: 700mm Electrical Motor: 22kW / 1.470 RPM Rodpfx Acjg Snt Se Tscd

Year of construction: 2019, condition: new, Recirculating air convection furnace Gas-fired furnace CGN Powder coating oven NEW – SGS-800/O Gema Optiflex Width: 2500 mm, Height: 2500 mm, Depth: 12500 mm Directly from the manufacturer. Rcodpfx Acscw Tzxo Tod For more information, visit Romer-Deutschland.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Rcedpfx Aex Dip Tsc Tsd Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Rcedpfxst Akt Rs Ac Ted Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany Redpfoh Ek Dasx Ac Tocd - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: good (used), Crane system with two fixed (l= ~6.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder. Rcedeg Dgh Iopfx Ac Ted

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Rcjdpfx Acskkiwxe Tod