Used Tai Cut for sale (17,829)

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Hsdpfxjx Ndu Dj Agloh Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES Hodpothg Diefx Agljh LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: used, Year of construction: 2022, Plasma cutting system Manufacturer: Swift Cut Hsdpfxsyazzbj Aglsh Model: Pro 3000 Year of manufacture: 2022 Travel range X/Y: 3,000 x 1,500 mm Power source: Hypertherm Powermax65 SYNC Max. sheet thickness (mild steel): 16 mm Max. sheet thickness (stainless steel): 12 mm Max. sheet thickness (aluminium): 12 mm Table length: 3,000 mm Working width: 1,500 mm Table width: 1,500 mm 20126

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Control Fanuc 0i-MF Plus, CNC controlled 5th axe TSUDAKOMA TN - 101. Probe Renishaw, tool holders. Axes 510 x 360 x 300 mm Table 600 x 360 mm Max. spindle revolutions 8 000 rpm Spindle BT-30 Number of tools in tool holder 20 Machine dimensions 2 700 x 1 600 x 2 310 mm Hedpfx Asycgurogloh Machine weight 2 000 kg

Condition: like new (used), Year of construction: 2020, operating hours: 100 h, functionality: fully functional, Magi-Cut V11 FULL RELEASE UK LICENCE woodworking software PERPETUAL LICENCE WITH A DONGLE , COST - 7250£ PO - PROFESSIONAL OPTIMISER - 5750 POUNDS SC - STOCK CONTROL - 1500 POUNDS Hsdpfx Aoyapn Noglsh OUR PRICE - 2999.99 POUNDS - Homag Biesse SCM BRANDT CHEHISA FELDER compatible and many more

Condition: used, Year of construction: 2022, type of input current: AC, input voltage: 230 V, input current: 6 A, input frequency: 60 Hz, We are offering this used Swift-Cut Pro 3000 plasma cutting machine, year of manufacture 2022. Model: Pro 3000 Serial number: PRS-3000-07221520 Voltage: 110–230 V AC Frequency: 50–60 Hz Current: 6 A Phases: Single Year of manufacture: 2022 Hsdjycv Unopfx Aglsh If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Good Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in very good condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: 3000 x 1500mm Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Hjdjwb D S Hjpfx Aglsh Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Explore Other Waterjet Options Here: Used Waterjet Cutting Machines Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale

Condition: good (used), Year of construction: 2007, functionality: fully functional, saw band length: 500 mm, The seeder operates flawlessly. It is being sold due to discontinued production. Hedpfx Agsx U Df Hsloh

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, rotational speed (max.): 10,000 rpm, Control system: Heidenhain iTNC 530 Hsdpfsx Hfnmex Agljh Technical specifications: Travel distances: X-axis: 1,100 mm Y-axis: 610 mm Z-axis: 610 mm Rapid traverse (X/Y/Z): 32 m/min Feed rate (X/Y/Z): 12 m/min Distance table surface – spindle nose: 120 – 730 mm Maximum speed: 10,000 rpm Torque: 332 Nm Drive power: 13 kW Tool holder: SK 40 Tool positions: 30 Table dimensions: 1,250 x 610 mm Maximum table load: 900 kg Connected load: 35 kW Machine weight: 7,500 kg Chip conveyor Internal coolant supply (ICS): 22 bar Coolant tank capacity: 250 liters Air through spindle center

Condition: good (used), 12 speeds 44–1500 rpm. TAI PIIN TPR-1100. MODEL: 1100 Year of manufacture: 1994-11 Drilling capacity in steel: approx. 40 mm Drilling capacity in cast iron: approx. 55 mm Tapping capacity: steel approx. M25, cast iron approx. M38 Arm length: 1100 mm Travel over slide arm: approx. 900 mm Spindle taper: Morse taper MT4 Spindle speed: 44–1500 rpm, 12 steps Automatic feed: 0.05 / 0.09 / 0.15 mm/rev (3 steps) Spindle stroke (quill travel): 250 mm Column diameter: approx. 260 mm Box table: approx. 635 × 520 × 415 mm Base dimensions: 1725 × 715 × 180 mm Max. machine height: approx. 2530 mm Spindle motor power: approx. 2.2 kW (3 hp), 2-speed motor Transport dimensions: Hjdpfjxxv Raox Agleh Height: 2000 mm x Width: 720 mm x Length: 1750 mm Weight: 1850 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2024112326, CUT-CREASE-FOLD Hjdpfxjx Ezk Ie Agleh Max cut size - 600*900mm Operating mode - Vacuum absorption Cutting accuracy - 0.01mm Head - 2 blade heads Repeat Accuracy - 0.05mm Maximum uncut running speed - 800mm/s Max cutting speed - 700mm/s Force - 2000g Output modes - U disk/WiFi/USB Power

Condition: good (used), Marel SC90 Salmon Slicer Salmon Slicer Model: SC90 Silk Cut 11 D Cut slicer Single Lane With adjustable slice thickness and angle Up to 90 slices per minute Hjdpev Dmz Dsfx Agloh Slice angle: 8-20 degree Dual frequency 50/60Hz

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, table height: 1,750 mm, table length: 3,710 mm, working width: 1,500 mm, table width: 1,960 mm, We are selling a Swift-Cut 3000XP CNC plasma cutting center with a Hypertherm MAXPRO200, purchased mid-2023. The machine has seen very little use. According to the manufacturer, the maximum sheet thickness is 50 mm; we have cut sheets up to 40 mm thick. The cuts were clean and straight, with minimal slag. Piercing in the middle is possible up to 32 mm thickness. Hjdsxxighjpfx Aglsh The machine offers online support from Swift Cut in both English and German. Solid Edge software is installed on the machine. The machine is immediately available. We are planning to invest in further production equipment. The unit is located at our subsidiary in the Czech Republic – Vrbno pod Pradědem.

Condition: good (used), Pal-Cut 800 Minkpapir Sheet dispenser Packaging machine Hjdpetub T Ujfx Agleh 3 pieces in stock

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Hsdpfxeq Ulh Hj Agleh Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: used, Year of construction: 2013, 3-axis CNC machining center MTRent/MTCut V110, No. 131057, built in 2013, 30-station tool changer, chip conveyor, cooling units, SIEMENS Sinumerik 828D control system, weight approx. 6,900 kg Hodpfx Agswczg Rjlsh

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Conditions of delivery Cost of delivery Hjdpfxocudizs Agljh Client cover startup type negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. Hedpfx Asttlfksglsh LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: PR4-3000-07190386, sheet thickness steel (max.): 22 mm, sheet thickness aluminum (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting area: 3000 x 1500 mm Drives: 400 W AC OMRON servo motors Hjdpjvw Amcofx Agljh Plasma source Hypertherm: Powermax 105 Duty cycle: 80% 100% duty cycle: 94 Amps Maximum piercing capacities Mild steel: 22 mm Stainless steel: 20 mm Aluminium: 20 mm MACHINE DETAILS Space requirement: 5.50 x 2.80 m Machine dimensions: approx. 3.7 x 2.0 m Transport dimensions: 3780 x 2115 x 1500 mm Weight: 1.1 t Box software: included Operating hours: 265 arc hours

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm MACHINE DETAILS Laser Type: TruFlow 2700 Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT Hedpfoyanr Tjx Agleh - Documentation / Manual - Safety light curtain - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 22,600 h, machine/vehicle number: A0230A2187, laser power: 7,000 W, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 116 mm, No minimum price – guaranteed sale to the highest bidder! TruLaser 5030 Laser Cutting Machine with Special Equipment TruFlow 7000! TECHNICAL DETAILS Laser power: 7,000 W Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 116 mm Max. sheet thickness (steel): 25 mm Max. sheet thickness (aluminum): 20 mm X-axis feed rate: 200 m/min Max. workpiece weight: 900 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 11,100 x 4,600 x 2,600 mm Total weight: 12,000 kg Control system: SINUMERIK 840D Laser type: TruFlow 7000 Laser hours: 22,600 h EQUIPMENT • Enclosed machine frame with integrated laser unit • Motion unit for ultra-precise machining • Gantry drive combined with linear direct drives • Enclosed beam guidance • Single cutting head strategy • TFT color monitor • Longitudinal conveyor belt for small parts and scrap Hedpfxjyanpls Agloh • Automatic pallet changer • Work area lighting • Positioning laser diode • Oil spray device • Piercline • FocusLine • NitroLine • PlasmaLine • CO2 Laser TruFlow • Maintenance-free turbo radial blower • Lens cutting head with 250 mm lens • Universal quick-change device (UTI) with bus connection • LensLine with condition monitoring • ControlLine: height control and sheet edge detection • Auto shut-off • ConturLine • FastLine • FlyLine • Microweld • USB interface • RJ-45 network connection • CE marking • Light barriers • Multi-chamber extraction system • Compact dust extraction unit • Complete operating manuals • Lens cleaning kit • Transport locks • Crosshairs/ measuring bridge

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 89N1160, cutting width (max.): 800 mm, insertion depth: 800 mm, overall weight: 900 kg, reverse speed: 70 mm/s, TECHNICAL DETAILS Cutting width: 800 mm Insertion depth: 800 mm Maximum operating height: 100 mm Hedoycr Ikspfx Agleh Pressing force: 180–2,700 daN Minimum cut without cover plate: 15 mm Minimum cut with cover plate: 50 mm Return speed: 70 mm/s MACHINE DETAILS Power consumption: 4.0 kVA Power supply: 400 V, 50 Hz, 2.6 A Control: 18.5" touchscreen Program memory: 1,998 jobs Total cuts: 24,551 Weight: 900 kg Table: Stainless steel with air support EQUIPMENT 1× mounted POLAR 78 1× new POLAR 78 SKH-2, 960×110×11.7 mm Process visualization Hydraulic swinging angled cut LED cutting line indicator Air table Robust machine body Ultra-fast knife change with POLAR OptiKnife New spare knife

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 18,000 h, machine/vehicle number: A0215A0232, laser power: 2,500 W, sheet thickness (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.1 mm, overall weight: 8,900 kg, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Laser power: 2,500 W Maximum sheet thickness (mild steel): 15 mm Maximum sheet thickness (stainless steel): 6 mm Maximum sheet thickness (aluminum): 5 mm Axis speed: max. 60 m/min Positioning accuracy: ±0.1 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): approx. 7,400 × 3,300 × 2,300 mm Machine weight: 8,900 kg Mains connection: 400 V / 50 Hz Connected load: 65 kVA Control voltage: 24 V Required fuse protection: 3 × 100 A Hsdpfx Agsyb Rzyjlsh Compressed air connection: 7–14 bar Nitrogen connection (N₂): 29 bar Oxygen connection (O₂): 14 bar Operating hours: approx. 18,000 h EQUIPMENT Automatic pallet changer FocusLine laser technology NitroLine laser technology Maintenance-free AC servo drives

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 724, saw blade diameter: 600 mm, table height: 850 mm, positioning accuracy: 0.4 mm, rotational speed (max.): 3,000 rpm, working length: 8,000 mm, TECHNICAL DETAILS Saw blade diameter: 600 mm Motor power: 12.5 HP Saw blade speed: 3,000 rpm Working table height: 850 mm Extraction ports: 3 units, diameter: 100 mm Max. working length: 8,000 mm Positioning accuracy: +/- 0.4 mm Cutting capacities Width 610 mm, height: 30 mm Width 580 mm, height: 60 mm Hjdpoyf Evyofx Agljh Width 530 mm, height: 100 mm Width 490 mm, height: 120 mm Width 450 mm, height: 140 mm Width 380 mm, height: 160 mm MACHINE DETAILS Drive system of saw unit: hydraulic Discharge area: 4,000 x 600 mm Compressed air requirement: 7 bar Dimensions & Weight Overall dimensions of assembled machine (L x W x H): 13,000 x 2,000 x 1,600 mm Transport dimensions (L x W x H): Machine 1,200 x 1,700 x 1,600 mm Transport dimensions (L x W x H): MATRIX pusher 8,800 x 1,500 x 1,500 mm Weight: 1,600 kg EQUIPMENT Feed system with precision rack and pinion and brushless motor Position measurement via magnetic tape Pneumatic lifting of the pusher with workpiece measuring probe Cutting cycle control via keyboard or remote PC Operator software with 99 programmable cutting cycles Operator software with 1 cutting cycle for 100 programmable dimensions Safety cover for cutting area Two-hand operation safety device Discharge flat table

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Hjdpfx Asyf Eucsgloh Electronic programming device Perimeter safety guards