Used Cutting Device for sale (23,852)

Condition: ready for operation (used), Year of construction: 1990, A Westema cutting table for precise cutting of soft, flexible materials is available. Table dimensions X/Y: 2250mm/1500mm, max. cutting height: 230mm, cutting speed: 16m/s, motor power: 1.1kW. Including quick clamping and grinding device. Documentation available. An on site inspection is possible. Lhsdpfxeyttvqo Ancjl

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. Lodpjzti Tkofx Ancehl This equipment has very few operating hours.

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Lodpfx Ansihf Tpecshl Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes Lsdpfxey In Avo Ancohl

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Lhedpfjy In Apox Ancjl Thin sheet loading: yes

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L Lhedpfx Ansfhbuyocjl - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. Lhjdpfjzu Nm Hox Ancel * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Condition: new, mileage: 16 km, power: 427 kW (580.56 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, S-WAY AS440S58 T/FPADR 04406 ELECTRIC ROOF HATCH 01520 STANDARD BLACK GRILLE 73203 STANDARD STICKERS FRONT DOOR PILLAR ONLY 02198 FRONT PARABOLIC SPRING 07279 PLASTIC FRONT BUMPER 00874 AS MY HIGH ROOF CAB 01626 LOGOs STD LIGHT GREY 72579 2 KEYS WITH IMMOBILIZER 14987 WITH WVTA CERTIFICATE OF CONFORMITY 01738 INSTRUMENT CLUSTER 10 INCHES 02104 DUAL-LINE TRACTION/TRAILER AIR COUPLING - ISO 06139 STANDARD FIFTH WHEEL COUPLING 02085 TRAILER/SEMI-TRAILER SOCKET 15 POLE ISO 08380 REAR OVERHANG 1047.5 MM 02104 DUAL-LINE TRACTION/TRAILER AIR COUPLING - ISO 06139 STANDARD FIFTH WHEEL COUPLING 02085 TRAILER/SEMI-TRAILER SOCKET 15 POLE ISO 08380 REAR OVERHANG 1047.5 MM 08329 STANDARD GEAR SHIFT MODE 08289 TOLL COLLECTION SYSTEM PREPARATION 00278 CONNECTIVITY BOX AREA 1 77985 ENGINE IDLE CUT OFF 00868 STANDARD SETTING CURSOR 13 02647 AERODYNAMIC KIT 02475 TPMS WITH SENSOR INTEGRATED IN THE RIMS 14569 STANDARD DATA INTERFACE FLEET MANAGEMENT SYSTEM 77389 ECO-ROLL 78878 GPS-PREDICTIVE DRIVE 14522 ADAPTIVE CRUISE CONTROL - A.C.C. 07638 WITH REVERSING WARNING 78287 LANE DEPARTURE WARNING SYSTEM EU STANDARD 02221 ADVANCED DRIVER DISTRACTION WARNING 02211 WARNING TRIANGLE NO. 1 00671 STANDARD CATWALK 14861 HILL HOLDER 07888 ESP (ELECTRONIC STABILITY PROGRAM) 00407 REVERSING SYSTEM 00404 BLIND SPOT ON PASSENGER SIDE ONLY 00409 INTELLIGENT SPEED ASSIST 00880 NO HIGH WAY ASSIST 02548 SIDE MARKER LIGHTS Lhedjz Ednkspfx Ancsl 00402 STARTING INFORMATION SYSTEM 78484 AEBS COMPLIANT 00414 ALCOHOL INTERLOCK INTERFACE 76960 ENGINE PLATE 01043 ENGINE SPEED 1650 RPM 78514 STANDARD REVERSE GEAR 05313 EURO VI E CALIBRATION 73131 DRIVE TIRE 315/70R22.5 06356 SPEED LIMITER 90 KM/H - ELECTRONIC 07356 LOAD 8000-13000 78031 630CC CLUTCH COMPRESSOR 78032 120A SMART ALTERNATOR 08552 PNEUMATIC FRONT SUSPENSION 01242 STANDARD CHASSIS 08620 BATTERIES LOCATED ON REAR OVERHANG 76048 STANDARD PROTECTIVE TREATMENT 00219 TWO FOOTRESTS 01669 SINGLE REDUCTION SOLO LIGHT 17X 06439 UNIFIED AIR TANK PLATE 02358 REAR SHOCK ABSORBERS 06434 TEMPERATE ZONE EQUIPMENT 06433 STANDARD EQUIPMENT 08294 CHASSIS WITH GRAY IC 444 (RAL 7021) PAINTED COMPONENTS 00127 STANDARD STEERING CIRCUIT 06467 STANDARD GCW 07700 JACK 73073 BATTERY CHARGE PIN 00073 FRONT STABILIZER BAR 03181 LOW-POSITIONED EXHAUST PIPE 08071 ENGINE AIR FILTER UNDER CABIN 06113 STANDARD REAR PNEUMATIC SUSPENSION 08378 DEVICE AND PROVISION FOR DUAL CHASSIS HEIGHT WITH PNEUMATIC SUSPENSIONS 00829 12TX 2860 TD GEARBOX 02326 PLASTIC PARTS IN VISIBLE COLOR CAB PASTELL 02759 CABIN PNEUMATIC SUSPENSION 02714 HEATED AND ELECTRICALLY ADJUSTABLE REARVIEW MIRRORS 02758 POWER-ASSISTED CAB TILT 00632 EXTERNAL SUN VISOR 79585 ROOF INSULATION FOR SUB-ARCTIC CLIMATES 00823 DIGITAL TACHOGRAPH DTCO 4.1 ADR 02443 STEERING WHEEL WITH LEATHER COVER 78563 PNEUMATIC HORN - CHASSIS 05629 ROLLER BLIND SUNSHADES ON DOORS 02917 HIGH COMFORT DRIVER SEAT IN LEATHER, SEAT BELT ADJUSTMENT, ADDITIONAL RECLINING ADJUSTMENT, CLIMATE AND VENTILATION CONTROL, RECLINING ADJUSTMENT 72264 1-PIECE HARD LOWER BED WITH PROTECTION 01765 CHROME FINISHING 08117 SWIVEL PASSENGER SEAT LUXURY UPHOLSTERY, PNEUMATIC SUSPENSION, 3 DEGREES OF FREEDOM, EXTENDABLE AND HEATED CUSHION, HEADREST, LUMBAR SUPPORT ADJUSTMENT 07830 FIFTH WHEEL H 150MM +

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, Available in Q1/2027, equipment can still be adapted to meet specific needs. Universal 5-axis retrofitting grinding machine directly from the manufacturer. Equipped with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, spur gears, skiving tools, deep-hole drills, and other workpieces/components. Working area: X-axis: 630 mm Y-axis: 345 mm Z-axis: 430 mm C-axis: Rotation angle 300° X3 auxiliary axis: Working area: 400 mm Grinding spindle: Interface: HSK80 (conversion to HSK50 possible) Power: 100% 28.8 kW Speed: Standard 12,000 rpm Measuring system and feed: Resolution of linear axes: 0.0001 mm Rapid traverse of linear axes: 30,000 mm/min Resolution of rotary axes: 0.001° Speed of C-axis: 150 rpm Rotary axis: (A-axis SK50) Center height: Standard 175 mm Speed as spindle: 1,000 rpm Optional: 2,600 rpm Lodoyzqwcepfx Ancshl Control system: Siemens 840D SolutionLine Tool changer: Single-wheel, 6-8 positions Coolant system: Turbo Separator Extraction system: LTA Fire extinguishing system: Kraft & Bauer Dressing unit Tailstock: optional Further accessories/clamping devices available from the extensive A. Haas clamping device catalog. Individual, customer-specific training programs. Includes pre-acceptance at the manufacturer's plant, IBN (installation, briefing, and training), and final acceptance at the customer's site. Financing options available upon request.

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: Lsdpfx Aneyz Rvxjcehl · cutting, · brush deburring, · facing / chamfering, · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Designed for high-precision single or double cuts. One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Condition: excellent (used), Year of construction: 2014, Equipment: CE marking, Heavy-duty, semi-automatic band saw for cutting steel plates and blocks - including coolant system - including chip conveyor - including stepless cutting speed control Lsdpfx Ajzhlcdjncohl - including stepless, hydraulic feed rate control - including hydraulic band tensioning Technical data: Cutting range H=600 mm; overhang=660 mm; L=2,500 mm Saw band dimensions 6,140 x 54 x 1.6 mm Saw band speed up to 20-80 m/min Saw motor power 7.5 kW Table height approx. 1,475 mm Cutting length max. 2,500 mm Dimensions 5,320 x 2,200 x 3,200 mm Weight approx. 7,500 kg including various clamping devices

Condition: good (used), Year of construction: 1968, functionality: fully functional, Robust Altendorf F90 panel saw in a heavy-duty, solid design. The machine features a large sliding table with a cutting length of approximately 2,600 mm, a parallel fence, and a crosscut/miter fence. A cutting width of approximately 1,250 mm is available to the right of the saw blade. A classic, robust Altendorf machine for use in carpentry workshops and woodworking businesses. Technical specifications Manufacturer: Altendorf Machine type: Panel saw Ljdpjz D Uqtjfx Ancshl Year of manufacture: 1968 Cutting length: approx. 2,600 mm Cutting width to the right of the saw blade: approx. 1,250 mm Motor power: 5.5 hp / approx. 4.0 kW Voltage: 380 V Equipment Large sliding table Parallel fence Crosscut/miter fence Saw blade guard Manual adjustments Heavy-duty, solid design The machine is in used condition, commensurate with its age. Transport is possible for an additional charge! Note The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: ready for operation (used), Bandsaw – Horizontal KASTO BSM 260 / 400 - Maximum cutting height: 260 mm - Cutting range, flat/rectangular: 400 x 260 mm - Miter cutting device - Cutting speed, continuously adjustable: 17-110 m/min - Drive power: approx. 2.2 kW - Saw blade dimensions: 4310 x 27 x 0.9 mm - Coolant system Ledpfjzifc Tex Ancehl - Roller support - Well-maintained, good overall condition Dimensions: L x W x H: 2.5 x 1.2 x 1.5 meters / 1300 kg Errors and omissions excepted.

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Lhjdozka Imjpfx Ancjl

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Lhedpjzil Ivjfx Ancjl The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Back gauge depth: 1250 mm Lhedpszz Adfjfx Ancsl Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Bending die width: 10/20 mm Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: safety light barrier, Hundegger SC 3 Speed-Cut – model year 2020, for sale due to new acquisition in May 2027. We are selling our fully automatic cutting system, the Hundegger SC3 Speed-Cut, from 2020. Machine equipment: - SC 3 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production program CAMBIUM - Automatic cross-section control, Y-axis - Central lubrication - Combination support for vertically operating tools - Vertical finger milling cutter, 5.5 kW - 4-axis revolving milling head, 7.5 kW - Combination support for horizontally operating tools - Drilling unit 2.2 kW, drilling direction horizontal - Marking device, bottom - Marking device on horizontal support - Inkjet labeling system Inkjet 4, from the rear - Automatic discharge of small components to the front - Wood storage blocks with rollers after discharge - Control unit for disposal with operating buttons Upgraded in May 2023 for €8,500: SC 2100 drilling unit 2.2 kW, drilling direction vertical, on the combination support for drilling up to 24 mm 4-sided inkjet labeling system Inkjet 4 CONVEYOR SYSTEM ALSO INCLUDED IN THE PRICE!!! Lhedpfx Aoz Dga Tsncel BEBL conveyor system, transverse and vertical General: Year of manufacture: 2020 Operating hours: low, approx. 3900 hours (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good, like new Contact: Holzbau Gutmann GmbH, Reulbacherstraße 18, 36115 Hilders

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Lodpfxjzlzv Ie Ancshl Stock number: 1148

Condition: good (used), Year of construction: 2005, functionality: fully functional, spindle bore: 50 mm, turning diameter: 190 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 190 mm, center height: 170 mm, center width: 700 mm, turning length: 600 mm, quill stroke: 120 mm, total length: 1,596 mm, total width: 880 mm, total height: 1,240 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, type of input current: AC, overall weight: 730 kg, Equipment: rotational speed infinitely variable, Due to restructuring measures, we are selling our conventional lathe – EMCO EM 17 D. - Year of manufacture: 2005 - Good condition - Fully functional - Distance between centers: 700 mm / Center height: 170 mm - Max. turning diameter: 340 mm (190 mm over cross slide) - Max. turning length: 600 mm - Spindle max. 3,000 rpm – 5.3 kW - Speed infinitely adjustable (frequency control) - 4-speed gearbox – with reduction - Constant cutting speed adjustable - 3-jaw chuck 200 mm - 2+1-axis digital display Ljdpfxoz Aff Is Ancshl - Complete machine documentation - Depending on the price, various tool holders, a 4-jaw chuck (faceplate) 200 mm, and a collet chuck device (tube and collet) can be purchased. - The machine can be inspected while powered on. - Full spare parts supply and service provided by EMCO. This offer is subject to change. Sale is subject to prior sale. No online sales. The sale is only to businesses after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pickup only (EXW) – no shipping.

Condition: good (used), Ideal 5222 Digicut Hydraulic Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment. The machine was purchased from a government office. Technical specifications: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance from the saddle to the knife: 520mm 230V power supply Key features: Lhodpfx Anezt H Tzjcjl The machine has a full EP programmer with the ability to save individual steps to memory. Hydraulic pressure beam drive, fully adjustable pressure from 200-1100N Electromechanical knife and saddle drive Automatic pressure synchronized with the knife’s cutting movement Electronically controlled saddle adjustment knob with adjustable speed Side tables Photocells „SCS” safety system, including: Electronically controlled two-handed cutting start Automatic knife return from any position Transparent cover on the rear table Laser cutting indicator Additional equipment includes: spare knife, cutting sticks, tool kit, paper stack tapping device, safe knife change device, and documentation.

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A Lhjdpfx Ajy E Nxgjncjl 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Lhsdpfjztz Elox Ancjl Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: used, Year of construction: 2017, x-travel 2010 mm y-travel 3010 mm z-travel 200 mm Capacity 4000 bar table load 1200 kg/m2 feed 10/5 m/min Table 3000 x 2000 mm control FANUC dimensions of the machine ca. 10,3 x 4,2 x 3,25 m used CNC water cutting machine in gantry style Ljdpfx Anozmitkocshl - high pessure pump 4000 bar - cutting tool WJS Basic cutting head, abrasiv dosing device - CAD/CAM software IGEMS 2D CAD, 2D CAM and AWJ modul - pressure vessel 200 ltr./ abrasive tower 1 tonne - abrasive controling package - abrasive disposal package - Remote control software - collision protection package - nesting level 1 + 2

Condition: excellent (used), Year of construction: 2016, operating hours: 158 h, functionality: fully functional, machine/vehicle number: GG6TKB-21932, total width: 4,201 mm, total length: 7,151 mm, overall weight: 2,250 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 6,100 mm, feed length Y-axis: 3,355 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Loading, cutting and break out machine for monolithic glass sheets with less than 158 working hours! Glass thickness automatic detection device enables automatic adjustment of machine parameters. Jumbo sheets: max. 6100x3355 mm, thickness 2–19 mm. Ljdswnww Nepfx Ancjhl

Condition: used, Year of construction: 2009, functionality: fully functional, cutting width (max.): 297 mm, cutting length (max.): 420 mm, working width: 2,680 mm, input voltage: 400 V, input frequency: 50 Hz, BIELOMATIK A3 / A4 CUT-SIZE PAPER SHEETING & AUTOMATIC REAM WRAPPING LINE Ljdpfx Anez An Tuecjhl High-capacity, fully automated A3 and A4 copy paper sheeting and packaging line manufactured by Bielomatik (Commissioned in 2009). Engineerd for high-precision cutting, hole punching, and continuous ream packaging for office and printer paper production. TECHNICAL SPECIFICATIONS & FEATURES: - Manufacturer: Bielomatik - Year of Commissioning: 2009 - Machine Layout / Pocket Configuration: 2x4-Pocket (Dual-stream 4-pocket layout) - Max. Operating Speed: Up to 500 m/min - Packaging Capacity: 32 Reams / minute - Suitable Paper GSM Range: 75 - 90 g/m² - Paper Formats: A4 / A3 cut-size - Inline Hole Punching Unit: Included / Operational - Packaging Unit: Integrated automatic ream wrapping & film packaging system with customer-brand labeling options. CONDITION & INSPECTION: The machine is fully operational and maintained in excellent working condition. Available for on-site inspection. Technical datasheets, operational videos, and additional high-resolution images can be provided via email or WhatsApp upon request.