Used Cutting Table Air Separation Stove for sale (53,604)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking, and separating laminated glass, model SN GG520A-19388, manufactured in 2011. Automatic positioning based on optimization, automatic blade, 2 independent heating sections, 20mm trimming, laser device for positioning diagonal cuts. Max cutting length 3700mm, max speed 100m/min, min glass thickness 2/2mm and max 8/8mm. Includes: New felt (5mm) on the unloading table, air tubes have been replaced, and the 520 LAMe-37 has undergone servicing. Dcjdpfx Aoxg Nxyjcpon

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Dcedpjymax Ejfx Acpjn Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: good (used), Year of construction: 2005, operating hours: 3,736 h, functionality: fully functional, overall weight: 21,000 kg, For sale: Westeria wind sifter. Type: WS Raupe Operating hours: 3736 In good working condition. Year of manufacture: 2005. Fully mobile, with good tracks. Includes a generator. Ready for use. Keywords: Recycling, waste, sorting, wind sifter, sifter, screening, windshifter, windsifter, tracks, generator, power unit, tracks, mobile Dcjdszbk U Tepfx Acpen

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads Dsdpfxsymaw Uj Acpscn - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - loading table for jumbo sizes 6000 x 3210 mm with integrated transport belts - laminated glass cutting module with cutting length : 4600 mm 4 unloading arms new heating element from december 2025 min. glass thikness : 3 + 3 mm + PVB max.glass thikness: 8 + 8 mm + PVB Dcjdpfsyh T Ruex Acpsn Knife separation : After automatic cutting and separation the PVB is cut by a blade giving a clean edge without any residue PC control system windows PC " View Plus " including flat screen monitor with cutting pattern display and optimisation import Lay out attached in photos

Condition: refurbished (used), Year of construction: 2000, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Machine in excellent condition with low working hours, optional mobile bunkerconveyor (the one on the picture) available for extra. Dedpevy A Urjfx Acpecn New conveyor belt cleaner.

Condition: good (used), Year of construction: 2007, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, Glass cutting line for split strips - consisting of: Glass Hegla Cutting Table OPTIMAX3323F 6372 2007 00305 Dodpeu S R Ilefx Acpscn Glass Hegla Glass loading Table BBS 3323 7176 2007 00306 Glass Hegla Breakout Table LKB 4230 15811 2007 00307 3 racks included , fencing included

Condition: good (used), Polar Mohr 137 XT Autotrim Paper Cutting Guillotine The machine is fully functional and in very good condition. Reviewed and ready to use. This is the most respected guillotine brand, a flagship product. Technical specifications: Cutting width: 1370mm Stack height: 165mm Programmer with touchscreen display Autotrim – a split front table for removing trim Includes the original steel basket. Comb cutting adjustment from the machine’s control panel Air knife for blowing small debris off the knife Air table Photocells Chrome table surface Ball screw drive for the rear comb Servo-driven saddle control for very fast operation Optical cutting line Enlarged side tables Dcedpfx Acszz Hhhjpsn Additional rear table guards Weight: 4500 kg 380V power supply Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting width (max.): 3,200 mm, cutting length (max.): 2,200 mm, SUMMA F3220 – Professional Large-Format Cutting Table (2020) SUMMA F3220 - Working area: 327 x 210 cm - Vacuum extraction system 2.3 kW / Noise absorber - Package with 6 pneumatic media clamps + roll holder - Integrated camera Dedpfxoy Sapvj Acpecn - ADC Control module left + right INCLUDED MODULES AND TOOLS - Tangential module (x2) - V-Cut 45° - V-Cut 0° - Heavy Duty Cutout Tool (45° / 90°) - Double Edge Cutout Tool (50° / 60°) - Pneumatic oscillating tool - Creasing tool HIGH-FREQUENCY MILLING MODULE Complete high-frequency milling kit: - Routing module with brush system - SycoTec milling motor - Integrated electronics + vacuum control - 6 mm collet Additional accessories - Industrial vacuum cleaner HERCULES 3000W

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1303, total width: 4,400 mm, total length: 3,300 mm, total height: 1,700 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 3,210 mm, feed length Y-axis: 3,300 mm, cutting length (max.): 3,300 mm, We offer this Hegla VSG-M 33 MT laminated glass cutting table, which is in very good condition and was manufactured in 2005. Manufacturer: Hegla Model: VSG-M 33 MT Dedpfxez Hl T Ro Acpocn Year of manufacture: 2005 Condition: very good ID Category: 518 ID Machine Type: 898 Type: laminated glass cutting table If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: good (used), The Bystronic glass cutting line for split band dimensions (Maximum 3300 x 2550 mm) Service/spare parts are provided by Hegla, who purchased Bystronic. 1 Bystronic KTR tilting table, Serial No. E9801016-1, Dcedpot Et Icefx Acpon o Tilts with built-in hydraulics, roller drive for automatic glass transport to the cutting table • 1 fully automatic float glass cutting table o Type: XYT 972, Serial No. E980016-2 o Can also be used for shaping, waste optimization, and PC Terra o Maximum dimensions 3300 x 2550 mm o Glass thicknesses 2-15 mm o With belt conveyor • 1 breaking table with breaker bars and air cushions o Serial No. E980016-4

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Dcsdpfxev Aailo Acpjn

Condition: used, Year of construction: 2020, Nominal output: 29.8 kW Air flow rate: 2400 m³/h Combustion chamber depth: 580 mm Loading door: 330 mm x 330 mm Heatable volume: approx. 600 m³ Dodoz A Eapepfx Acpjcn Heatable area: approx. 120 m² Space requirement: approx. 600 mm x 800 mm x 1900 mm Weight: 230 kg Flue pipe diameter: 160 mm Warm air outlet nozzle: 2 x 200 mm Operating modes: Automatic and manual Chimney diameter (approximate): 200 mm

Condition: used, Year of construction: 2015, functionality: fully functional, cutting width (max.): 3,210 mm, cutting length (max.): 3,200 mm, overall weight: 1,945 kg, type of input current: three-phase, total width: 3,920 mm, working width: 3,210 mm, total length: 5,100 mm, input voltage: 400 V, input frequency: 50 Hz, The Kongsberg C64 is a used digital cutting table manufactured in 2015. It is in good working condition and has been regularly serviced by an authorized distributor. With a working area of 3,210 × 3,200 mm, it is designed for precise cutting, milling and finishing of large-format materials. Dedpjzz Igxefx Acpjcn The machine is equipped with a 3 kW milling unit, an i-camera system, eight vacuum zones, a workstation, the QuickRelease system and a range of tools for cutting, milling, V-notching and processing self-adhesive vinyl. The machine is sold without a conveyor system and is in good working condition.

Year of construction: 2017, condition: ready for operation (used), A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible. Dedpfxox A Hg Ho Acpscn

Condition: excellent (used), functionality: fully functional, M&J 6000-12 Cutting Table Mint condition Counterknives fully rewelded and hardfaced Shafts with Bearing System 1 arrangement ✔️ Ready for immediate use Contact us for price and further details. Dcodpsw Ufhbjfx Acpsn

Condition: good (used), Polar Mohr 115 X Plus Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Dsdpfjzw T A Rjx Acpjcn Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Year of construction: 2019, operating hours: 5,000 h, condition: used, functionality: fully functional, machine/vehicle number: F55 SV 078M, Oven - Manufacturer: Themor Flux - Model: F 55 - Hot air wood-burning stove - Year of manufacture/purchase: 2019 Dedszxw Dbepfx Acpecn - Used sparingly - Well-maintained condition - Ideal for heating larger rooms, workshops, halls or similar buildings Döring stainless steel chimney - Manufacturer: Döring - Double-walled stainless steel system - Diameter: approx. 160 mm - Total installed height to date: approx. 10.60 m - Several 1-meter pipe extensions available - Including inspection/cleaning element - Including connection/T-piece - Numerous matching wall brackets and connecting clamps - Additional available mounting material will be included - The chimney was mounted on a building and can be reused accordingly

Condition: good (used), Perfecta 92 Paper Cutting Guillotine The machine is in very good condition, serviced and ready to use. Technical Specifications: Cutting width: 920mm Stack height: 120mm Minimum scrap: 18mm Weight: 2300kg Power supply: 400V Equipment: – Brand new programmer and complete control system Dsdpszw Tx Sjfx Acpocn – New photocells – Air table – Hydraulic clamp with variable force adjustment – Side tables – Tool kit – Spare blade

Condition: excellent (used), Year of construction: 2014, 507 USED Fritsch FT-350/700-R dough cutting table. EXTERNAL DIMENSIONS (in cm): - W: 89 - L: 362 Djdpfxszufhto Acpocn - H: 100 - working width: 62 TECHNICAL DATA: - year of production: 2014 - power: 0,12 kW - power supply: 3×400V + N + PE, 50Hz - weight: 300 kg - belt speed: 2.9 m/min EQUIPMENT: - interchangeable cutting rollers The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: repair required (used), For sale: Disassembly table, 4.5 meters long, made of stainless steel. Slightly damaged (sheet metal cut). Net price: 600 Euros, negotiable. Dcodezwv T Sepfx Acpjn

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Vibrating feeder Blower with V = 7,000 m³/h Dodpeqi Eh Hefx Acpjcn incl. steel construction, platform, railings, etc.

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 3,642 mm, total length: 3,334 mm, input voltage: 400 V, feed length X-axis: 2,900 mm, feed length Y-axis: 2,600 mm, working width: 2,600 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, cutting width (max.): 2,540 mm, cutting height (max.): 20 mm, compressed air connection: 9 bar, We are selling our Atom FlashCut Fashion 26B All-in-One fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate unloading area of 1,200 x 2,600 mm, the FlashCut 26B offers ideal conditions for efficient workflows. The maximum cutting height of 20 mm allows for processing a wide range of materials – including multilayer applications. Two independently operating tool heads ensure high speed and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements with a travel speed of up to 80 m/min and an acceleration of 1G. Intelligent Material Handling & Vacuum Technology A continuous conveyor belt feeds the material into the processing zone. The vacuum table is divided into 300 x 300 mm segments, allowing targeted activation of individual areas. This ensures precise material fixing while minimizing energy consumption. Two high-performance vacuum pumps with frequency control (3–15 kW) automatically adjust their output to actual requirements. The result: secure material fixing with energy-efficient operation. Precision through Camera and Projection Technology For maximum material utilization, the system is equipped with two cameras with integrated light sources and dimmers for detecting irregular material contours – for example, when processing leather hides. Flaws can be digitally marked and taken into account during further processing. Two high-performance projectors support automatic nesting by projecting cutting contours directly onto the material. In addition, item numbers, sizes, or other markings can be projected onto the cut parts – ideal for process reliability and traceability. Powerful CNC Control & Software The system features a modern CNC control unit, including TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support enables easy operation and remote maintenance. The software package includes: - DXF converter for reading and converting CAD files - Interactive layout software - Automatic nesting software - CAD module for creating simple geometries Optionally, the Luxury Nest Strategy adds a specially developed nesting logic for optimizing leather cutting. It takes into account quality zones, defect areas, and defined rotation and grouping rules to ensure maximum material yield. Versatile Tool Equipment The FlashCut 26B comes with a multi-tool head. Standard tools include: - Drag knife - Punch tools (various diameters) Dcodpfx Asymn R Njcpen - Marking tool - Tracing needle - Laser pointer - Knife holder and ejector This makes the system flexible for cutting, marking, and perforating tasks. Safety & Reliability A safety system with light barriers and emergency stop button ensures maximum operational safety. The machine is CE-compliant and designed for continuous industrial operation.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2022KL2938, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, warranty duration: 12 months, • Glass cutting table SDRD FULL Tilted table which supports the process of manual cutting the glass, product designed and manufactured in Poland Length - 3400 mm Width - 2400 mm Height - 910 mm Breaking bar - 2 pieces in cross arrangement Bars steering - by foot pedals Air cushion system - installed Power of fans (air cushion) - 2,2 kW Air cushion system steering - by foot pedals and hand button Tilting of the top - pneumatical Stabilization of tilting - by hydraulic speed controller Support of quick tilting - by to gas springs Pull-out cantilevers of glass loading - yes, manually Covering of the top - grey felt Dcsdoh Nx R Tepfx Acpjn Covering of the circumference - ash slats Wheels - 4 rotary, with increased load Levelling feet - 4 pieces installed Steel construction covering - polyurethane covering Filling of the lower beam in stationary construction - vibrated, fibre reinforced concrete Table available from stock. Our company also delivers worldwide.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1216, total width: 4,000 mm, total length: 4,500 mm, total height: 1,150 mm, overall weight: 2,600 kg, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, VSG cutting table M 37 incl. support Dcjdpfx Acsxg Ii Rspjn Cuts from 6-16 mm Pneumatics new, heating lamp new, felt new, machine comes with a service contract! If interested, we can also provide additional pictures and videos.