Cylinder press buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

Cylinder & Letterpress Europa ES

Aachen, GermanyGermany dealership location
6372 km
1968
used
Label die cutting machine Europa ES Mdxkn Size max: 230 x 230 mm, Size min: 10 x 10 mm, PressurePressure needed: 10 T more
6

Impression Cylinder Heidelberg GTO46

Nürnberg, GermanyGermany dealership location
6749 km
1982
good (used)
Impression Cylinder Heidelberg GTO46 Year ca. 1982 42.611.014 Coe2ctsvo -Available Immediately - -can be inspect- -on stock - can be test- more

Letterpress printing cylinders Heidelberg SBB 57x82

Allmendingen , GermanyGermany
6718 km
1971
ready for operation (used)
format 57 x 82 grey model Nstlwfpj more
2
Impression cylinder SM 74 T070st8p more
3
The compressor is a so-called "screw compressor" that is extremely quiet and very powerful, designed for continuous operation. You can use it for the press and for UV-dryer together. The device was used only in single-shift operation and regularly maintained. Yrrdmk more
4

Two cylinder press brake Lotze 322

Goldenstedt, GermanyGermany dealership location
6424 km
1978
used
Electrical welded steel construction Free column passage: 4000 mm Hydraulical drive two pressing cylinders: Pressing power: 200 t opening width btw. Table and pressure length: 5000 mm engine power: 18 kW stroke of pressure beam: 150 mm central lubrication weight: approx. 20.9 t controled axis pressing depth and backgauge overhauled in 2003: control modernization complete overhaule of cylinder (sealing and... more
5

Cylinder & Letterpress Heidelberg Tiegel OHT

Aachen, GermanyGermany dealership location
6372 km
1971
used
Used Heidelberg Tiegel OHT Mpxs9 Size max: 260 x 380 mm more
1

2 cylinder piston compressor AIRMATIC 10 - 420 - 60 R

Sundern - Amecke, GermanyGermany dealership location
6459 km
1996
used
maximum Drucklstg.: 10 bar Tddzlkiol Ansauglstg.: 420 ltr. / min. Boiler capacity: 60 LTR. Total power: 2 KW / 230 Volt Weight: approx. 60 kg more
2
. Pneumatic press Fabr SMC Cylinder Type CDS 1 WFN 160-150-A51 Year 1987 Technical data: Press force 150 kg = 9.9 kgf / cm stroke 160 mm Slide diameter 50 mm spacing between the uprights 360 mm projection 150 mm mounting height 280 mm Exterior measurements . 450 x 350 x 800 mm Used, in good condition V9jmtczds more
1
Washing device impression cylinder XL 9jymv0gpn more


cylinder p...
daily

New machines via email!

Stay updated!
6

Hydr.-two cylinders workshop press FISHER 2-60

Rödermark, GermanyGermany dealership location
6579 km
1980
used
Technical data: -maximum pressing force per cylinder 60 tons -maximum piston stroke 350 mm Cro0k9r -Mounting flange to the tappets Ø 250 mm -Distance of the cylinder approx. 600 mm - stand width 1600 mm -maximum mounting height approx. 870 mm -Table size 1600 x 700 mm -Table plate thickness 50 mm -Floor table height 630 mm -Through hole in table top, left cylinder Ø 90 mm -Drive 400 V / 7.5 kW -Space about B H 2800 x 2600 X 700 mm -Weight approx. 3200 kg more
3

Cylinder & Letterpress Linotype 53

Aachen, GermanyGermany dealership location
6372 km
used
This Linotype model 53 was designed for text setting. Similar in basic construction to the model 48, has a single magazine, single distributor, and one mould. Machine No.: 18121 Fb70fgh more
6

Letterpress-cylinder Heidelberg OHZ SGS

Helmstedt, GermanyGermany dealership location
6606 km
used
Size max 720 x 1040 mm min 400 x 550 mm size of cutting area max 690 x 975 mm Speed max 3.600 c/h Ggqydfae more
2
2-cylinder piston compressor type Fabr FLACO VKAZ 1700 G mach 30360000/5700 Year 1997 Technical data. Displacements 1718 l / min Effective delivery volume 1326 l / min. Compressor speed 950 rpm. max. Pressure 15 bar Motor power 11 kW Overall dimensions 1400 x 700 x 1000 mm - mounted on base plate - used without boiler, in good condition Selllktl more
2
Pressure: 10bar, suction capacity: 660l/min, output: 520l/min, rotational speed: 1025/min max., capacity: 270l, connected load: 4kW, length: 705mm, width: 750mm, height: 1800mm, weight: 170kg. Bbc90vanew more
2
PROFESSIONAL BODY PRESS / 2.5 tons. Press pressure, "made 100% in Germany" by rack gear cylinder *** UNUSED SHOW MACHINE *** - accurate, winkelgenaü edge, banding, body & frame press - Einspannmasse: (H x W) 1600 x 2900 mm - Einspannmasse : (H x W) at frame 1600 x 2600 mm supply equipment (Fig. contains partially or special equipment): - 3 pressing units with rack gear cylinder - 90 degree stop extras: - page printing with two-hand hydraulic cylinder - side pressure device with two rack gears -... more
4

Cylinder & Letterpress Heidelberg Tiegel OHT

Aachen, GermanyGermany dealership location
6372 km
1965
used
B0z0r390 Machine No.: 153.521, Size max: 260 x 380 mm more
2
PROFESSIONAL FRAME PRESS / 2.5 tons. Press pressure, "made 100% in Germany" by rack gear cylinder *** UNUSED SHOW MACHINE *** - accurate, winkelgenaü edge, banding, body & frame press - Einspannmasse: (H x W) 1600 x 2900 mm - Einspannmasse : (H x W) at frame 1600 x 2600 mm supply equipment (Fig. contains partially or special equipment): - 3 pressing units with rack gear cylinder - 90 degree stop extras: - page printing with two-hand hydraulic cylinder - side pressure device with two rack gears ... more
1
PROFESSIONAL gluing / 2 tons. Press pressure, "made 100% in Germany" by hand hydraulic cylinders *** UNUSED SHOW MACHINE *** - accurate, winkelgenaü edge, banding, body & frame press - Einspannmasse: (H x W) 1600 x 2900 mm - Einspannmasse: ( H x W) at frame 1600 x 2600 mm supply equipment (Fig. contains partially or special equipment): - 3 pressing units with manual hydraulic cylinder - 90 degree stop extras: - page printing with two-hand hydraulic cylinder - side pressure device with two rack ... more
1
PROFESSIONAL FRAME PRESS / 2 tons. Press pressure, "made 100% in Germany" by hand hydraulic cylinders *** UNUSED EXHIBITION & TRADE MACHINE *** - accurate, winkelgenaü edge, banding, body & frame press - Einspannmasse: (H x W) 1600 x 2900 mm - Einspannmasse: (H x W) at frame 1600 x 2600 mm supply equipment (Fig. contains partially or special equipment): - 3 pressing units with manual hydraulic cylinder - 90 degree stop extras: - page printing with two-hand hydraulic cylinder - side pressure dev... more
1

DEWATERING FILTER PRESS HYMAC-KVAERNER 80MSL

North Carolina, United StatesUnited States dealership location
518 km
1993
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu7k7w3zc HYMAC-KVAERNER, Model 80MSL, Twin Wire Belt Press complete with the following components and features: -- Pressurized Headbox. -- 316 Stainless Steel Belt. -- Static Foils. -- S-Roll Drive. -- (2) Shower Washes. -- 75 HP Drive. -- This unit is rated to dewater 150 to 230 BDTPH. 4.5% Feed, 35% Discharge. -- Already removed from service and is ready to load. more
1

Press Brakes AGIL 3000mm x 150 ton Press Brake, with Top and Bottom Tooling

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Bczlpaqur8 more
5

Punching Press Peddinghaus Hydraulic 1001

Köln, GermanyGermany dealership location
6416 km
2004
used
pressure:100 t punching cross-cut in cmm:2430 mm² stroke:10 - 50 mm throat:510 mm Working height:1100 mm total power requirement:7,5 kW weight of the machine ca.:2,4 t dimensions of the machine ca.:1,78 x 1,02 x 2,06 m Ojij90o Hydraulic Peddinghaus punching machine 1001, with conventional drive, height-adjustable wiper with removeable panel. The stroke length and stroke position is adjustable between 10 - 50 mm at the Hydraulic 1001. The punching machine is equiped with a hydraulic low pressur... more
10
SX80/350 Belt Driven Compressor 15 kW 20 HP 3 Phase (Used) MPN : SX80/350 Serial Number : 26126 Year of Manufacture : 2002 Supply : 380 / 415 /440 V Phase : 3 phase star delta Rating : 15 kW Horse Power : 20 hp Displacement : 80 cfm (63 cfm fad at 100psi) Tank Capacity : 300 litres Tested : No, for spare parts or refurbishment project Wxecg Damage : Please see images - a few bashes here and there, cage bracket supports have broken and need welding. Please Note : Compressor i... more
2

Punching Press DURMA P 55

Witten, GermanyGermany dealership location
6419 km
2008
used
pressure:055 t punching cross-cut in cmm: - stroke:60 mm work height max.:1100 mm throat:510 mm F0hebzyrq engine output:5,5 kW more
1

DEWATERING FILTER PRESS KOMLINE SANDERSON GMR 1/1

North Carolina, United StatesUnited States dealership location
518 km
1982
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Glzuvezra KOMLINE SANDERSON Kompress Belt Filter Press, Model GMR 1/1, complete with the following features: -- Belt width: 1 Meter. -- 1 HP Pressure Belt Drive. -- ½ HP Gravity Belt Drive. -- Conditioning Tank with ½ HP Feed Pump. -- Control Panel. -- This machine needs to be removed from its installation but has not been used. more
1

Compressors HYDROVANE Compressor with Ingersoll Rand Dryer and Welded Steel Air Receiver

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Bcvzokffxl more
3

Automatic Punching Press Mubea Mubea VP600

Köln, GermanyGermany dealership location
6416 km
1994
used
pressure: t no. of strokes: Hub/min sheet width:1200 x 750 mm weight of the machine ca.: t Gvyz7l2x8 :80 mm max. material thickness:20 mm min. material thickness:1,5 mm Mubea plate punching machine with coordinate table and CNC control. more
6
Manufacturer Strautmann Typ Bale Tainer Year of construction 2011 Hours of operation 3.057 hours Quantity of pressed bales 138 pieces Press power main press 60 tons Bcv7jm0zii Feed channel 2,815 x 1,085 mm (l x w) Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 9,2 kW Connected load 15 kW Tying system 4 fold vertical, fully automated Bale weight up to 400 kg, depends on material SPS controller (manuf., type) Siemens S7 300 Operating panel (manuf., type) Siemens Simatic Touch Pa... more
4

CNC press brake Beyeler RT80x2050

Erwitte , GermanyGermany dealership location
6470 km
1990
good (used)
Used CNC press brake Fabr. BEYELER, type RT80x2050 Built in 1990 with Cybelec 90/9000 specifications Maximum bending length 2050 mm continuity betw. d. stands 1500 mm Throat depth 250 mm stroke 380 mm (high) Height 530 mm (increased) 2.50 x 1.80 x 3.15 m machine weight machine dimensions Lxwxh approx. 7400 kg of equipment and accessories 2-hand control foot pedal various press brake tooling for hydraulic pump overhauled in March 2018 Mwzpx more
1
Elect./Voltage: 380 V, 50 Cy, 3 Ph. Dal3ynt Electrically controlled Frame Clamp for window assembly with hydraulic pressing force up to approx. 2,000 kG (4,400 Lbs). -- Up/down traveling Horizontal Top & Bottom pressure clamping beams ride on double ball bearings on 2-1/2" wide precision machined steel track verticals; these beams allow for an infinite height (top/bottom opening) adjustment. -- The horizontal (side) pressure assembly also travels (left/right) on ball bearings and can adjus... more
1

Compressors HYDROVANE 66CM Rotary Vane Air Compressor

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Bcvzotwllm more
6

Pneumatic Press FESTO Pneumatik

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2009
used
Stroke 3 mm Stroke Y-Axis 1200 mm Bcy8texvoy Stoke Z-Axis 285 mm 123/5000 Meintest du: Fest Handling - pneumatisch Linienportal für Be- / Entladung Der Greifer ist absolut neuwertig und nie eingesetzt worden. Fixed Handling - pneumatic Line portal for loading / unloading The gripper arm is absolutely new and never been used. more
6
chamfer lenght 480 - 4045 mm Various tooling: Ysfxwan9 1: 65 x 65 x 4045 mm (hardly used), dimensions see sketch, price = 940, - 2: 118 x 65 x 3055 mm, dimensions see sketch, price = 550, - 4: 90 x 90 x 515 mm, dimensions see sketch, price = 150, - 5: 65 x 65 x 480 mm & 65 x 65 x 665 mm, dimensions see sketch, price =300,- Prices excl. VAT Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
6
pressure 100 t distance between columns 625 / 300 mm stroke 8 - 100 mm table-size 950 x 550 mm ram surface 450 x 265 mm ram adjustment 65 mm no. of strokes 25 - 90 Hub/min dayligth 450 mm total power requirement kW weight of the machine ca. 6,5 t dimensions of the machine ca. 1,1 x 1,75 x 2,48 m Bbidakjz3h Press overhauled in 2015 and equipped with: -- Electrical overload protection -- Designed as a punching machine and has the operating mode -Setting up for two handed - Roll feed WL 20/8... more
5

Press brake ZYMT QC67K-125/3200

Vellmar, GermanyGermany dealership location
6555 km
2009
good (used)
A used well-preserved bending machine with: NC positioning control PGP 602 X - and Y - axes R axis manually adjustable Quick-change system for upper tool with crowning Eovm3bre8 Back gauge with ball screw and linear Guide Manual table crowning Tools Power 1250kN (125 tons) Bending length 3200 mm Height 425 mm Throat depth 320mm Working speed 10 mm / sec Further technical data see pdf. Document Technical data and dimensions: Excepted. more
5
Monospindle copy milling machine with pneumatic clamps for machining aluminium profiles Gvmag0 Spindle speed: 12,000 u per min. more
6
chamfer lenght 3050 - 4020 mm 4 pieces of unused upper tools: tool No 1 Length: 3700 mm, dimensions see sketch, price = 940,- Fem0ixm0m tool No 2 length: 4020 mm, dimensions see sketch, price = 880,- tool No 3 length: 3055 mm, dimensions see sketch, price = 750,- tool No 4 length: 3050 mm, dimensions see sketch, price = 750,- Prices excl. VAT Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1

wire nail press WAFIOS N4

Norderstedt, GermanyGermany dealership location
6479 km
1973
used
diameter range 1,8-3,1 mm 0oz29tgn nail length 13-75 mm output - pieces/min 550 mm more
7

KOLBUS Prägepresse PE 312

Espelkamp, GermanyGermany dealership location
6453 km
1999
ready for operation (used)
Ceiling before stack band Nfcfp Ceiling ceiling forming machine DBA magazine Mobile counting batch delivery with role railway export more
4
Pressure total: 315 ton Ram stroke: 400 mm Ram adjustment: 400 mm Cxxj9zg Shut height (stroke down, adjustment up): 750 mm Free frontal opening L-R: 2.510 mm Table surface area : 2.500 x 1.400 mm Ram surface area: 2.500 x 1.400 mm Cushion capacity in table: 63 ton Cushion stroke: 1650 mm Number of strokes: 25 [...] Required power: 55 kW Height over floor approx.: 6.650 mm Weight of machine approx.: 68 ton more
4

Eccentric Press - Single Column RASTER HR 35

Göppingen, GermanyGermany dealership location
6699 km
1965
used
pressure unbekannt t throat unbekannt mm stroke unbekannt mm total power requirement kW Nsenwyjx weight of the machine ca. t dimensions of the machine ca. m more


cylinder p...
daily

New machines via email!

Stay updated!

to

to

Edit search
CYLINDER PRESS
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close