Used D Andrea for sale (46,267)

Condition: used, mileage: 67,619 km, power: 110 kW (149.56 HP), first registration: 05/2023, fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, total length: 5,330 mm, total width: 2,030 mm, total height: 2,060 mm, Year of construction: 2023, Equipment: ABS, EBS, air conditioning, cruise control, fog lights, power assisted steering, power mirror, = Additional options and accessories = - Autoradio - Climate control - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Light alloy wheels - Parking sensor - Reverse camera - Side door - Sun visor = More information = Engine capacity: 1.995 cc Gbsdpozva Rfjfx Al Ueu Make of engine: Ford Tyre tread remainder on axle 1: 50%

Condition: used, functionality: fully functional, Year of construction: 2023, load capacity: 4,100 kg, lifting height: 6,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 100 kW (135.96 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 7,755 kg, total length: 4,970 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid Load center: 500 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Speed class: 40 Technical condition: New Front tire type: Pneumatic Front tire size: 460/70 R24 159A8 Front tire condition: 80 - 100% Rear tire type: Pneumatic Godpezxv Ewjfx Al Ujbu Rear tire size: 460/70 R24 159A8 Rear tire condition: 80 - 100% 3rd valve, 4th valve, rear work light, front work light, heater, dust filter, full cab, air conditioning, full free lift, CE certificate, Easy Link module, TÜV approval for 40 km/h

Condition: new, Thickness planer HOFMANN, model D 636 - new TERSA cutterhead with 4 knives Gsdpozylvuofx Al Usbu 5.5 kW motor, 400 V, 50 Hz, electronic start and brake unit Modern control panel ergonomically positioned. Electric adjustment of the thickness table with push buttons for adjustment in rapid or slow mode, as well as adjustment to within 1/10 mm, integrated operating hour counter. Thickness table on four support spindles and with 4-point guidance. Rubber infeed roller and 2 rubber outfeed rollers. Segmented pressure bar, rotary knob for pre-tensioning the outfeed pressure bar Dust extraction port Ø 160 mm, to the left. Integrated tool storage compartment including options: - Motor power 7.5 kW instead of 5.5 kW - Stepless feed rate 4-22 m/min, instead of the 2 feed speeds - Positioning control for D 636 with 250 memory slots

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 4,000 kg, lifting height: 9,100 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 100 kW (135.96 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 8,440 kg, total length: 5,120 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid Gbedpfxezyxcne Al Uju Load center: 500 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Speed class: 40 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 460/70 R24 159A8 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 460/70 R24 159A8 Rear tire condition: 80 - 100% Battery voltage: 12V Battery type: Starter Battery year of manufacture: 2026 Battery condition: 80 - 100% 3rd valve, rear work light, front work light, heater, soot filter, full cabin, air conditioning, full free lift, CE certificate, LED, seat Equipment: Classic

Condition: as good as new (ex-display), Year of construction: 2018, Shrink tunnel Manufacturer: Diez Type: HTC 5030 D Year of manufacture: 2018 Belt width: 50 cm Gbodszh Nxcjpfx Al Usu Length: 220 cm Passage height: 28 cm New No operating hours ä22926

Condition: used, Schneider SK D 2 twin-spindle table router for the precise machining of solid timber and wood-based materials, featuring two independently operable router spindles. The machine enables efficient working thanks to the rapid changeover between different router bits without any changeover times. Ideal for a wide range of routing tasks in window, door and furniture manufacturing. Technical data: - Motor, each: 4.5 kW - Spindle diameter: 30 mm - Spindle centre distance: 600 mm Gedpozryrzofx Al Ujbu - Speed settings: 3000/4000/5000/6000/8000/10000

Condition: used, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 5,530 mm, total length: 6,000 mm, Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s Gbodpfxoy E Uhme Al Ueu · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VF620M868GB000991, mileage: 217,066 km, first registration: 01/2016, fuel type: diesel, empty load weight: 14,518 kg, tire size: 315/80, axle configuration: 6x2, wheelbase: 3,500 mm, axle spacing: 1,350 mm, fuel: diesel, color: blue, emission class: euro6, suspension: steel-air, number of seats: 3, total length: 8,970 mm, Year of construction: 2015, operating hours: 13,628 h, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, tachograph, The subject of this advertisement is a Renault D series truck with a specialized Faun garbage truck body. First registration date: 06/01/2016 Year of manufacture: 12/2015 Mileage: 217,066 km Engine hours: 13,628 Power: 240 kW Engine capacity: 7698 cm3 Emission standard: Euro 6 VIN: VF620M868GB000991 Fuel: diesel Number of axles: 3 Drive: 6x2 Gearbox: ZF automatic Number of gears: 12 Suspension: leaf spring and air suspension GVWR: 27,000 kg Unladen weight: 14,518 kg Payload: 12,482 kg Length: 9 m Width: 2.5 m Height: 3.45 m Tire size: 315/80R22.5 Wheelbase: I-II 3.50, II-III 1.35 Body: FAUN Type: VR5 TR2 Year: 12/2015 Capacity: 20 m³ Equipment: ABS Differential lock Central lubrication system Central locking Electric windows Electric mirrors Hydraulic power steering Engine brake Hydraulics Immobilizer On-board computer Manual air conditioning Reversing camera Speed limiter Factory radio Adjustable suspension Cruise control Tachograph OUR SERVICES We provide: Gbsdpfsy Epa Sex Al Uou Preparation of documentation for registration and customs clearance (including EUR.1 and T1) Vehicle transport to any location in the world Vehicle service after purchase Repairs and maintenance of equipment purchased from us Upon customer request: Oil and filter change in the vehicle and in the body. *Comprehensive service and support at every stage of the process. *Possibility of leasing older vehicles, even those up to 18 years old. *If you would like to know more details, please contact us.

Condition: reconditioned (used), Lead and feed spindle lathe Kern Type / Model: D 20 A Condition: Overhauled Technical data Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (24): 31.5 - 1400 1/min Motor power: 4 kW Quill travel: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display Gbedpfx Asy H Eckjl Usu - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Follower center

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 8,158 h, load capacity: 5,000 kg, lifting height: 4,130 mm, free lift: 2,111 mm, fuel type: diesel, mast type: duplex, construction height: 2,890 mm, fork length: 1,300 mm, drive type: Diesel, Diesel forklift Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Gsdpfx Alszcrz Ds Usbu Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Side shifter, integrated 3rd valve

Condition: used, mileage: 80,000 km, power: 110 kW (149.56 HP), first registration: 04/2022, fuel type: diesel, overall weight: 3,010 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Looking for a different model, engine, dimensions, or other features? Feel free to contact us. We offer financing and leasing at attractive rates - also for the Netherlands, Austria, and new businesses! ---- Interior: Automatic climate control * 4 speakers * Audio system with radio + CD * Driver Information System (FIS) with color display * Multifunction steering wheel * Height-adjustable steering column * Rear armrest * Center console with storage compartment * Eyeglass compartment * Lockable & illuminated glove compartment * Electric windows front & rear * Auto-dimming interior mirror * Inside/outside temperature display * Cup holders front & rear * Reading light * Height-adjustable driver's seat * Carpet in the passenger compartment * USB/audio interface * 12V socket in center armrest / center console Safety & Assistance: Airbag driver & front passenger * Front passenger airbag can be deactivated * ISOFIX child seat mounting * Electronic stability & traction control * Front seat belt pretensioners * Height-adjustable seat belts * Side impact protection * Child safety lock * Start/Stop system (ASG) Wheels & Technology: Alloy wheels * Electrically adjustable exterior mirrors * Heated rear window * LED third brake light * Heat-insulating glazing * Remote unlocking of the fuel tank flap * Rev counter * Lashing eyes in the cargo area Exterior: Pick-up double cab * Side steps * Underrun protection front * Mud flaps front & rear * Bumpers in body color * Radiator grille in matte black * Exterior mirrors black * Door handles outside black * Roof antenna * Clear glass headlights * Wheelbase 3,000 mm * Engine 2.2 l DI-D diesel, 110 kW (150 hp) * Emissions standard Euro 6 * Trailer hitch 3.1t, 13-pin socket ---- Note: Please call briefly before your visit - we will ensure that your desired vehicle is on site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Individual customization on request is possible. Your vehicle partner since 1996. Call or email us now - we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale subject to change. Godpfjzn D Rmox Al Usbu Kind regards, Pimenta Automobile

Condition: good (used), functionality: fully functional, 1 x Universal milling machine Steinel SH 4 F Gjdpfx Aljz Ir Eco Usbu Year of manufacture: approx. 1975 With vise. Very robust and rare conventional machine in very good condition. A large amount of accessories (list to follow). Technical data: Travel distances: X: 400 Y: 150 Z: 350 mm Spindle speeds: 35.5 - 1,800 rpm (36 steps) Tool holder: SK 30 Feed rate in X: Feed range: 17.5 - 200 m/min Table clamping surface: 200 x 780 mm Machine can be inspected while powered on.

Condition: used, mileage: 43,535 km, power: 58 kW (78.86 HP), first registration: 10/1990, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 02/2027, color: beige, gearing type: mechanical, number of seats: 6, total length: 6,215 mm, total width: 2,180 mm, total height: 2,920 mm,

Condition: excellent (used), mileage: 62,646 km, power: 177 kW (240.65 HP), first registration: 01/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 2, loading space length: 6,740 mm, loading space width: 2,490 mm, Year of construction: 2018, General information Number of doors: 2 Cab: single Registration number: ET341KH Technical information Engine capacity: 7.718 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 7.718 kg Carrying capacity: 4.282 kg GVW: 12.000 kg Functional Height of cargo floor: 100 cm Environment Emission class: Euro 6c Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Gbedpfxsz Dpv Rs Al Uou When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: as good as new (ex-display), Year of construction: 2024, pressure (max.): 13 bar, CSA 15/13 SCREW COMPRESSOR, NO. 1,000 MOUNTED ON 500-LITER TANK WITH DRYER AND FILTERS 11 kW, 15 HP MAXIMUM PRESSURE: 13 BAR Godpez Duc Nofx Al Ujbu 400V/50Hz/3-PHASE FLOW RATE: 1147 L/min NOISE LEVEL: 67 dB(A) DIMENSIONS: 1540x665x1535 mm, WEIGHT: 450 kg Attached: User and maintenance manual CE declaration of conformity

Condition: ready for operation (used), VMI ASSY 10330-0400 REV. D Electronic module, serial number 4631400266, used, normal signs of use, 100% functional, scope of delivery as per photos Gbodpfxez Adg Rs Al Usu

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: orange, overall weight: 7,200 kg, empty load weight: 7,200 kg, operation weight: 7,400 kg, tire condition: 80 %, axle configuration: 6x2, number of seats: 2, first registration: 12/2014, shovel volume: 3.8 m³, suspension: air, Year of construction: 2014, operating hours: 6,100 h, Equipment: adjustable chassis, hydraulics, WE HAVE THREE CATERPILLAR ASPHALT PAVERS IN STOCK: TWO ORANGE AND ONE YELLOW. The following offer applies to a 2014 Caterpillar AP300D with 6,100 operating hours, equipped with an AS3173 working table. For sale is a professional asphalt paver designed for the construction and renovation of surfaces in small and medium-sized road projects. Its compact dimensions, hydrostatic drive, and hydraulically adjustable working width make it suitable for use in urban areas, on local roads, in parking lots, and on bicycle paths. MACHINE SPECIFICATIONS • Manufacturer: Caterpillar • Model: AP300D • Year of manufacture: 2014 • Operating hours: 6,100 hours • VIN/PIN: CATAP300JTEN00136 • Chassis: wheeled • Working table: Caterpillar AS3173 • Table serial number: DLC00589 Gbodpfsz I Srcjx Al Ueu • Weight as indicated on the manufacturer’s plate: 7,400 kg • Maximum permissible total weight: 7,750 kg • Country of manufacture: Italy CATERPILLAR C4.4 ENGINE The four-cylinder Caterpillar C4.4 ACERT diesel engine with a displacement of 4.4 liters provides power to the machine's drive and working units. • Gross power: 55.5 kW / approximately 75 hp • Net power according to model documentation: 50.9 kW / approximately 69 hp • Rated engine speed: 2,200 rpm • Fuel tank capacity: 110 liters • Hydrostatic drive system • Catalog travel speed: up to 16 km/h • Catalog paving speed: up to 30 m/min Smooth speed control allows the work rate to be adjusted to the supply of the mixture and the conditions on the construction site. Paving, travel, and maneuvering modes facilitate operation during surfacing and machine movement. AS3173 WORKING TABLE — WORKING WIDTH 1.70–3.20 M The mounted Caterpillar AS3173 table allows for hydraulically adjustable paving width in the basic range of 1.70 to 3.20 m. Model expansion options: • Width up to 4.00 m after mounting additional extensions • Width from 0.65 m with an appropriate reduction attachment • Catalog cross-profile adjustment of the table: from -2.5% to +4.5% The AS3173 design includes electric heating of the working plates and a vibration system. The table forms the surface and provides preliminary compaction of the mixture before final compaction with a roller. MIX FEEDING SYSTEM The AP300D model has a front hopper with a catalog capacity of approximately 3.8 m³. The mixture delivered by the truck is transported by conveyors to the rear of the machine and then distributed by screws in front of the working table. Independent control of the conveyors and screws allows the material feed to be adjusted to the working width and rate. The ability to change the direction of their operation facilitates control of the mixture when finishing the working strip. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 84 mm, clearance between the columns: 910 mm, displacement volume: 2,050 cm³, injection pressure: 1,620 bar, injection weight: 1,886 g, mold height (min.): 350 mm, ejector force: 110 N, ejector stroke: 250 mm, plate width: 1,260 mm, plate height: 1,270 mm, total length: 7,200 mm, total width: 2,150 mm, total height: 2,230 mm, overall weight: 17,210 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 183 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN500D1-3330 D=84 Clamping force 500T Tie bar spacing 910x830 Tool installation height 350 to 900 Robot interfaces Euromap 67, Euromap 13 Suitable robot available upon request Basic standard equipment: • CE standard • KEBA-3018 control system • Thermal insulation cover for the cylinder • Energy meter, intelligent version • 2 sets of core pull • 1 set of air blow device on the moving platen • 1 set of air blow device on the stationary platen • EUROMAP-67 interface • IT system • EUROMAP-13 core pull interface on the stationary platen • EUROMAP-13 core pull interface on the moving platen • 1 set of 6-way water distributor for the moving platen (11 l/min) Gbodpfx Alez I T E Ds Uou • 1 set of 6-way water distributor for the stationary platen (11 l/min)

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,449 h, load capacity: 4,500 kg, lifting height: 5,500 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,880 mm, fork carriage width: 1,250 mm, fork length: 1,400 mm, empty load weight: 7,300 kg, total length: 2,750 mm, drive type: Diesel, construction width: 2,250 mm, opening width: 1,340 mm, Four-way reach truck Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 200/50-10 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 1 x 250-15 Rear tire condition: 20 - 40% Gbedpjz Ifpzefx Al Uju Battery year of manufacture: 2014 Additional single auxiliary hydraulics, fork positioner, fully enclosed cabin with heater, 2 work lights at the front, 1 work light at the rear.

Condition: used, mileage: 69,350 km, power: 140 kW (190.35 HP), first registration: 12/2022, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, energy efficiency: B, color: blue, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 6, total width: 2,249 mm, total height: 1,901 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-start assist, Z3N Night Package, BA3 Active Brake Assist, BB7 CO2-optimized braking system, BH1 HOLD function, BS1 Brake calipers with Mercedes-Benz lettering, CA1 AGILITY CONTROL suspension, CL1 Steering wheel adjustable for tilt and height, CL3 Leather steering wheel, CL4 Multifunction steering wheel with trip computer, CM2 Bumpers and attachments painted in vehicle color, D14 Anodized roof rails, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1F Display diagonal 26 cm (10.25"), E1T Touchpad, E34 Buffer battery for starting, E70 Switch position, lower control panel, E7B Digital extra: Pre-wiring for navigation, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in trunk/cargo area, ES3 12V sockets for rear seat rows, right and left, EW6 Digital extra: Remote Services Plus, EX8 Digital extra: MBUX Navigation Plus, EX9 Digital extra: 3 years of free map updates, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown assistance, EZ5 Parking package, EZ8 PARKTRONIC, F2Z Decorative elements with double-stripe design, F3S Exterior mirrors painted in black, F65 Exterior mirrors, automatically folding, F66 Lockable glove compartment, F69 Exterior mirrors, electrically adjustable and heated with integrated turn signal, F72 Exterior and interior mirrors, automatically dimming, FC1 Electronic key in chrome design, FG0 Center console with roller cover, FK4 Radiator grille painted in black, FP3 Mirror package, FP5 Sport package exterior, FR8 Rear view camera, FS5 Illuminated mirrors for sun visors, FZ8 Comfort opening and closing with infrared remote control, G43 9G-TRONIC, H00 Warm air duct to the passenger compartment, H12 Auxiliary hot water heater, H15 Seat heating, front. We can be reached by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Furthermore: Leasing/financing and trade-in possible! - Errors and prior sale reserved! - All information without guarantee ... more on our website. Gbodpsz Iztcefx Al Ueu

Condition: used, Year of construction: 2003, Format: 390 x 285 mm Gsdpezphl Refx Al Ujbu Equipment: Book stacker Book Format Dimensions (Height x Width) Minimum format: 115 x 100 mm (down to 115 x 70 mm with optional small-format modifications) Maximum format: 390 x 285 mm (up to 390 x 310 mm with specific produ Book Thickness Minimum thickness: 5 mm Maximum thickness: 90 mm Stacking and Pile Height Maximum stack / pile height: 340 mm Operational Performance Mechanical capacity: Up to 3,900 cycles per hour (or roughly 65 cycles per minute) Infeed and Rotation: Features a built-in turning device capable of rotating the blocks gently

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Godpozilz Njfx Al Ujbu Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG75/D K/RT50 Pressurized water temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial applications in plastics processing, especially for the temperature control of injection molds and other process tools. Manufacturer's serial number: 102010170001, Year of manufacture: 2009 Temperature: max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 100 l/min Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Gsdpfoz Au Hbex Al Uobu Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooling unit) Pump motor power: 1.5 kW Continuous sound pressure level

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2016, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,910 mm, Year of construction: 2016, Equipment: ABS, = Additional Options and Accessories = - EBS - Rear doors - Refrigeration/freezer unit - Air suspension - Disc brakes = Notes = 11/2016 Schmitz refrigerated semi-trailer with ABS/EBS, SAF axles with disc brakes, CARRIER VECTOR 1550 D/E (diesel operating hours: 13,965 h / electric operating hours: 4,932 h), palletized structure, aluminum floor, internal dimensions: 13.32 x 2.50 x 2.65 m, tires: 385/65-R22.5 (tread depth left: 9/7/5 mm; tread depth right: 9/7/3 mm), unladen weight: 8,528 kg, permissible total weight: 42,000 kg, Dutch registration with valid main inspection until 11/14/2026 = Additional Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: SAF DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; tire tread depth left: 55%; tire tread depth right: 55% Rear axle 2: Max. axle load: 9000 kg; tire tread depth left: 45%; tire tread depth right: 45% Gedpfxsz Df Tlj Al Uebu Rear axle 3: Max. axle load: 9000 kg; tire tread depth left: 40%; tire tread depth right: 30% Weights Unladen weight: 8,528 kg Payload: 33,472 kg GVWR: 42,000 kg Functional Cooling: 30 °C to -29 °C Body brand: Schmitz Cargobull SCB*S3B Refrigeration engine: Diesel and electric (13965 diesel operating hours; 4932 electric operating hours) Wall thickness: 50 mm Maintenance, history, and condition APK (Technical Main Inspection): valid until 11/2026 Technical condition: very good Optical condition: very good Identification License plate: OP-77-LJ Further information Please contact Arne Honingh for further information.

Condition: used, Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Channel baling press Paal Konti 325 D/SO, year of manufacture 1999 Technical data: Manufacturer: Paal Type: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connection: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput at: 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Gjdpfx Alez A T I Ie Usbu Transport dimensions approx. 12352 x 2340 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in fully functional condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.