Used D Andrea for sale (46,200)

Condition: new, 3D perforated table 2400 x 1200 x 200mm, grid 100mm, plate thickness 20mm, hole diameter 28mm, Iedpfx Abjvm Dk Iovoth Plan machined, very solid weight approx. 950 kg With table base Price is without accessories

Condition: used, maximum load weight: 33,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 6,000 mm, loading space volume: 29 m³, total width: 2,470 mm, total height: 3,900 mm, Year of construction: 2025, Equipment: ABS, D-TEC 3-axle container chassis 20 FT ADR with VANHOOL single-chamber pressurized tank, 29 cbm First registered April 2025 Tank container built in 2006 Unladen weight 5,640 kg Steel chassis, fully spray-galvanized and painted in 2-layer RAL 9005 Fifth wheel height 1,180 mm Tires: 6 x 385/65 R 22.5 Hankook High-gloss aluminum rims All-LED lighting, round rear headlights 2 x LED work lights SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE KNORR Trailer EBS VANHOOL 20 FT tank container, V2A stainless steel Single-chamber 29,362 L volume Test pressure 2.86 bar Operating pressure 2 bar Door cover DN500 Outlet at the rear center of the stainless steel casing Iodoyxb Hcopfx Abveth RENTING is the new BUYING. Rental or full-service leasing is available immediately.-----

Condition: used, axle configuration: 3 axles, first registration: 07/2010, total length: 9,430 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,400 mm, Year of construction: 2010, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension Itodpozcxkxefx Abvoh = Further Information = Axle configuration Tire size: 385/65 R 22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 25%; Tire tread depth right: 25% Rear axle 2: Tire tread depth left: 25%; Tire tread depth right: 25% Rear axle 3: Tire tread depth left: 25%; Tire tread depth right: 25% Weights Unladen weight: 5,209 kg Payload: 37,791 kg GVW: 43,000 kg Condition Damage: None Identification License plate: OL-93-BV

Condition: used, axle configuration: 3 axles, first registration: 06/2007, total length: 9,480 mm, total width: 2,470 mm, wheelbase: 7,330 mm, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Lifting axle - Air suspension Ijdpfx Ajzcxkrjbvsth = Additional information = Unladen weight: 5,300 kg Payload: 37,700 kg GVW: 43,000 kg Damage: none Registration number: OJ-28-VX

Condition: used, axle configuration: 3 axles, first registration: 06/2007, total length: 9,480 mm, total width: 2,470 mm, wheelbase: 7,330 mm, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Lifting axle - Air suspension = Further information = Unladen weight: 5,300 kg Payload: 37,700 kg GVW: 43,000 kg Itjdpfxezcxkls Abveh Damage: none Registration number: OJ-26-VX

Condition: like new (used), functionality: fully functional, OPPOLD WEFIX IV 68 – Cutter head set for window and door milling In very good condition, like new, the cutter head set has been used very little. Consists of 16 double-rebate profile and groove milling heads. Includes detailed drawings, which can be sent to you by email upon request. All milling heads are suitable for a 50 mm spindle or collet. The carbide indexable inserts for the window milling set can still be obtained from OPPOLD for many years. A large proportion of the indexable inserts are of standard design, which makes the milling set very economical. The standard indexable inserts are very inexpensive and can be used on multiple sides. Clamping height: 80 and 95 mm. The carbide indexable inserts have a very long service life. For weather protection strips of type BUG R12.25S and GUTMANN Werra 12.25, for threshold profiles of type BUG BSL12.25S and GUTMANN Lech 12.25. With a distinct visible joint of R 3 mm. The milling set is complete. All indexable inserts are in good condition and sharp. You can start working immediately with all the milling heads. With this milling set, you can manufacture windows and doors IV68 with a double rebate, Euro groove and Euro rebate, and a 12 mm rebate clearance. The new price for all milling heads was approximately 35,000.00 DM. For a material thickness of 68 mm. Seals, rain strips and milling accessories can still be obtained for this milling set for many years. We will personally deliver the milling set throughout Germany for 220.00 euros, so you have no risk when purchasing. The milling set consists of: 10 double-rebate profile milling heads: K3 4660 L4 - Frame, bottom, outside K3 4660 L7 - Frame, side and top K3 4660 L6 - Sash, inside, without strip 3 140 10 54 - Sash, upright and bottom 3 140 20 70 - Counter milling cutter 3 140 00 00 - Sash, inside, with strip 3 140 10 50 - Sash, outside, side and top 3 140 10 52 - Sash, outside, side and top, counter-rotating 3 140 10 58 - Sash, center rebate Without designation - Sash, inside, bottom and 6 groove milling heads: K2 3663 Z3 - Frame groove K2 3663 Z2 - Sash tenon K2 3663 Z4 - Frame tenon, top, transverse K2 3661 Z1 - Sash groove K2 3661 Z5 - Frame tenon, bottom Ijdpjzda Egofx Abvoth K2 3661 Z6 - Purchased later, without drawing.

Condition: used, axle configuration: 3 axles, first registration: 11/2010, total length: 9,300 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,510 mm, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Lifting axle - Air suspension Iodpjzb Hm Sefx Abvsth = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 3: Tyre tread left: 20%; Tyre tread right: 20% Weights Unladen weight: 4,050 kg Payload: 36,950 kg Gross vehicle weight: 41,000 kg Condition Damages: none Identification Registration number: OL-56-FN

Condition: used, axle configuration: 3 axles, first registration: 05/2005, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Lift axle - Air suspension - Disc brakes = Further information = Axle configuration Tyre size: 385/65 R 22.5 Itsdpfxszb Hm Eo Abvjh Axle brand: ROR Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; right: 20% Rear axle 2: Tyre tread left: 35%; right: 35% Rear axle 3: Tyre tread left: 40%; right: 40% Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damage: none Identification Registration number: OH-88-XH

Condition: used, axle configuration: 3 axles, first registration: 05/2008, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: tyre tread left: 35%; tyre tread right: 35% Rear axle 2: tyre tread left: 35%; tyre tread right: 35% Rear axle 3: tyre tread left: 35%; tyre tread right: 35% Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damages: none Iodpfxezb Hlze Abvjth Identification Registration number: OK-97-KH

Condition: excellent (used), Year of construction: 1998, Weishaupt L5 Z/D oil burner Output: 15-100kg/h Itodjh Ibgpspfx Abvsh Year: 1998-2006 Several available Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2003, Loos UH-D 800/13Bar{800kg/h} Itjdpfxjy E D Uvo Abvjh

Year of construction: 1998, condition: excellent (used), Steam Boiler Used Manufacturer: LOOS Type: UH-D Year of construction: 1998 Steam capacity: 1250 kg/h Weishaupt burner is available in several variants Itedpfxsiz Adwo Abvsh Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: used, empty load weight: 4,644 kg, maximum load weight: 38,356 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 11/2016, next inspection (TÜV): 05/2026, total length: 24,700 mm, total width: 14,200 mm, total height: 94,300 mm, suspension: air, tire size: 385/55 R22,5, Year of construction: 2016, front tire size: 385/55 R22,5, rear tire size: 385/55 R22,5, emission class: none, Equipment: ABS, ABS, SAF axle manufacturer, ADR, disc brakes, air suspension with lift, lifting and lowering, lift axle on 1st axle, 1 x 20, 2 x 20, 1 x 30, 1 x 40, 1 x 45, central extension, rear extension, 2x 7-pin + 15-pin connectors, 2x reversing lights Itedoyfiiqopfx Abvjh

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with the rear * 9-ton Valx axles with disc brakes Ø 430 mm * Rims ET 120 * Automatic lift axle on the first axle, * Operable via a switch on the chassis, or by actuating the service brake three times * With traction support, load increase on the 2nd and 3rd axle up to 130% below 30 km/h * Lifting / lowering controlled by the EBS modulator * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres as per manufacturer’s choice, with tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized container guides at the front Isdpfxjyq Ufuj Abvoth * Upper side of the frame spray galvanized * Paintwork: 1 coat, 2K RAL 9005, matte * 15-pin connector * Flashing side marker lamps * Multichamber rear lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers (overall length >16.5m, 2 wheelbases) * Compatible with 40 ft (2 wheelbases), 30 ft, 2 x 20 ft, and 20 ft rear-flush containers * 9-ton Valx axles with Ø 430 mm disc brakes * ET 120 offset rims * Automatic lift axle on the first axle, operable via a switch on the chassis or by pressing the service brake three times * Start assist: Axle load distribution to the 2nd and 3rd axles up to 130% below 30 km/h * Lifting/lowering controlled by EBS modulator * Tire size: 385/55 R22.5 * Fifth wheel height: 1,100 mm * Branded tires as per manufacturer's choice, with tire pressure monitoring system * Wheel chocks Iodpfeyq Ufzex Abvsth * Removable hot-dip galvanized front container guides * Upper frame surface hot-dip zinc sprayed * Coating: 1-coat 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-compartment tail lights

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,480 mm, loading space height: 2,303 mm, Year of construction: 2026, Equipment: ABS, Brand new D-Tec Flexliner Aluminium Tipper 57m³ with 3 Axles D-TEC Flexliner FL-3-S Aluminium * 3 axles * SAF axles * Disc brakes * Air suspension * Automatic lift axle * Wabco EBS * 57 m³ capacity * Aluminium load body * 7 mm wear-resistant aluminium floor * Internal dimensions approx. 10,300 x 2,480 x 2,303 mm * Tipping angle approx. 45–46° * Black sliding tarpaulin * Pneumatically locked combination rear door * 2 rear slides * LED lighting * LED work lamps * Toolbox * Load pressure gauge Itjdpsy Nuqiefx Abveh * Tyre pressure monitoring system (TPMS) * Broom/shovel holder * Access ladder * Steel rims * Tyres 385/65 R22.5 * Body colour: RAL 7001 silver grey * Frame RAL 7016 anthracite grey * Available at short notice * Errors and prior sale excepted We are always at your disposal for any questions.

Condition: new, maximum load weight: 29,860 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, D-TEC Slurry Tanker SV 2006 BASIC Specification: * Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C * Extended swivel arm * Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank * Flush line on the left side via tension cables over the hose trays * Automatic pump shut-off. Axle also equipped with anti-spray mudguard * Holder with 2 wheel chocks * Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high) Pump: * Vogelsang pump, 6,000 L/min Axles: * 9-ton Valx axles, Ø430 mm disc brakes, ET120 * 1st axle as lift axle * 3rd axle as steering/lazy axle Brakes: * Wabco EBS braking system Iedpfx Aeyhi Huebvsth * TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141) * No electronic air suspension Additional Options: * Third axle as self-steering axle Lift Axle: * Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times * Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h Tyre Size: * 385/65 R22.5 Tyres: * Apollo Lighting: * 24-volt lighting system Lighting options: * Flashing side marker lights * Working lights left and right at the first axle * 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks) Paintwork: * Tank painted in RAL 7030 STONE GREY * Chassis painted in RAL 7016 ANTHRACITE GREY Miscellaneous: * Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A) * Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Condition: new, maximum load weight: 28,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,184 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,722 mm, Year of construction: 2025, Equipment: ABS, Bodywork * Docking funnel 8" mounted at the upper rear, behind the tank, lockable with a manual slide gate * Direct idling at the rear side * Automatic pump shut-off * Lincoln centralized lubrication system for optimal time-based lubrication of slewing rings and axles (for drum brake 36P) * Bracket with two wheel chocks Pump * Vogelsang pump, capacity 6,000 L/min Axles * VALX axles with drum brakes, 9 tonnes, offset 0 Brakes Itjdpfx Ajxmudnobveh * WABCO EBS braking system * WABCO tire pressure monitoring system according to R141 * TPMS system Axles * Forced-steering axles Tire size * 385/65 R22.5, 9 t Tires * Brand: APOLLO Lighting * 24-volt lighting system * Side marker lamps with integrated flashing function * Work lights left and right at the first axle * Two LED work lights at the rear (one left, one right, mounted on the hose racks) * Two 7-pin connectors and standard 15-pin connector Accessories * Ball valves for complete tank emptying * Stainless steel vent container Paintwork * Tank painted RAL 7030 stone grey * Chassis painted RAL 7016 anthracite grey

Condition: used, maximum load weight: 28,360 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, D-Tec FL-3-S Steel Tipper 57 m³ - Cargo area length: 11,516 mm - Height: 3,900 mm - Width: 2,550 mm - Permissible total weight: 36,000 kg - Unladen weight: 7,640 kg - SAF axles with disc brakes - 385/65 R22.5 - ABS Itedpfx Asyzvf Ejbvsh - Alloy rims - Aluminium landing legs - Air suspension - Wheel chocks - 1st axle is a lift axle - Open side underrun protection - Grain chute - A-board - Plastic toolbox - Platform - Roll tarp 680 g/m2 - 5x tarp holders - Multi-chamber lights (standard) - 4x work lights - LED marking lights, flashing - Acoustic reversing warning device For further information, we are happy to assist you.

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times Isdpfx Asyq Ufnebveth * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-chamber tail lights

Year of construction: 2022, condition: used, functionality: unexamined, machine/vehicle number: S352621, S352622, S352623, Deburring system consisting of: 3 robot cells, each equipped with a KUKA robot KR10 1440-2 and deburring spindles, 3 safety enclosures with loading doors (one per robot), 1 hydraulic unit for clamping systems, 3 hydraulic clamping systems. For further details on condition and technical specifications, please refer to the attached appraisal report. Itsdpfxeyqycxo Abvoh

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2004, total width: 2,470 mm, suspension: air, tire size: 385/65, tire condition: 30 %, color: other, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes - Lift Axle = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.300 kg Carrying capacity: 37.700 kg GVW: 43.000 kg Maintenance APK (MOT): tested until 01/2027 Identification Registration number: OH-91-RL Itedpfx Aozbmr Usbvoh

Condition: new, For sale: professional industrial pump LOWARA BG9/D. The pump is brand new, unused, and stored as warehouse stock. Sold with original packaging and manual. LOWARA (Xylem) is among the top companies in the industrial pump sector. Perfect for water installations, industry, agriculture, pressure systems, and as a water pump. Technical data: Manufacturer: LOWARA Model: BG9/D Power: 1.1 kW Output power: 0.9 kW Voltage: 3-phase 400V Frequency: 50 Hz Flow rate: 20-65 l/min Head: 28.6 - 41.1 m Max pressure: 8 bar Material: stainless steel (INOX) Connections: 1 1/4" / 1" Weight: approx. 14.7 kg Condition: New – warehouse stock Possible minor storage marks on the packaging. Itsdpsyval Rsfx Abvjh

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Ijdpovllxdsfx Abveth Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: new, machine/vehicle number: D-CL-440-FR-EC, functionality: fully functional, input voltage: 230 V, volume flow: 450 m³/h, noise level: 58 dB, total height: 1,430 mm, total length: 450 mm, total width: 550 mm, overall weight: 50 kg, Equipment: rotational speed infinitely variable, type plate available, ISI D-CLEANER Mechanical air filter device (dust) Type: 440 FR Design: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for dust separation. Ijdpovrxc Ajfx Abvoth TECHNICAL DESCRIPTION: Air volume: - 450 m³/h (free blowing) (depending on the filter configuration without collection elements) Air inlet opening: baffle plate as pre-separator Intake nozzle: 100 mm (on the left side) Filter configuration: - filter cartridge (dust class M according to DIN EN 60335-2-69 Appendix AA) - compressed air cleaning via rotary vane nozzle Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 58 db (A)) Dimensions: length 450 mm / width 550 mm / height 1430 mm Weight: 50 kg