Used Dc Braking for sale (21,182)

Condition: excellent (used), Year of construction: 2012, tonnage 100 T Folding length 3100.00 mm guarding AKAS FIESSLER machine mounted laser guards CNC Cybelec 880s Throat 250.0 mm Vertical stroke 200 Working speed 100mm per/sec Axis number 4 Motor power 11.0 kW ----- Weight 9000.0 kg condition excellent can be demonstrated under power Psdpfxsztl Nzj Ai Degr BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: new, Year of construction: 2008, functionality: fully functional, MOOG G400-1002 Series Brushless Servomotor Type: CA58814063EP3, no brake Model: G400-1002 Power: 14.3 kW Rated speed: 3000 rpm Maximum speed: 3690 rpm Torque: 60.3 Nm Current: 34.3 A Voltage: 600 V Protection rating: IP65 Year of manufacture: 08/2008 Pgedpfx Ajzr E Dvoi Dor

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 66 h, load capacity: 227 kg, empty load weight: 7,400 kg, construction height: 2,000 mm, fuel type: electric, total length: 6,830 mm, drive type: Elektro, arm reach: 7,650 mm, construction width: 1,790 mm, working height: 15,940 mm, Articulating boom lift Speed class: 4.8 Technical condition: New Battery condition: New Pedjxq I Egopfx Ai Degr Description: The Genie Z-45/25J DC is a powerful electric articulating boom lift for working at heights both indoors and on emission-sensitive construction sites. With a working height of up to 15.94 m, a high lateral reach, an articulating arm, and emission-free electric drive, this machine is ideally suited for assembly, maintenance, and installation work, even in hard-to-reach locations or over obstacles. Compact, maneuverable, and easy to operate. You can find more information and submit a non-binding inquiry on our website – safe working at any height. In addition to this machine, we offer boom lifts and telehandlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 363 kg, empty load weight: 4,966 kg, construction height: 2,740 mm, fuel type: electric, total length: 3,120 mm, drive type: Elektro, construction width: 1,750 mm, working height: 14,300 mm, Scissor lift Speed class: 7.2 Technical condition: New Battery condition: New Pgedpfozu D Tzsx Ai Dsr Description: The Genie GS-4069 DC is a powerful all-terrain scissor lift for working at height outdoors and on uneven surfaces. With a working height of up to 14.3 m, a large platform and emission-free electric drive, the device is ideal for construction sites, assembly and maintenance work involving people, tools and materials. It is robust, all-terrain capable and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this device, we offer aerial work platforms and telescopic loaders for rent and sale. Our equipment is continuously serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-purchase, financing and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: good (used), Year of construction: 1996, machine/vehicle number: 090171, Offer 26222 Technical data: - Pressing force: 200 t - Working width: 4100 mm - Distance between uprights: 3050 mm - Table width: 220 mm - Overhang: 500 mm - Installation height: 550 mm - Approach speed: 80 mm/s - Working speed: 0 to 7 mm/s - Retraction speed: 70 mm/s - Stroke: 300 mm - Pneumatic connection - Drive: 400 V / 18 kW - Space requirement: approx. W 4800 x H 3150 x D 2200 mm - Weight: approx. 17000 kg - Includes: - Swivel arm – Control panel with DELEM DA 65 control, year of manufacture 2009 - Safety light curtain Psdpfx Aijzuziae Djgr - Motorized back gauge - Punch and universal die - Two-hand control panel with foot pedal

Condition: used, empty load weight: 6,623 kg, maximum load weight: 32,377 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 08/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total length: 13,620 mm, suspension: air, tire size: 445/45 19,5, color: yellow, Year of construction: 2018, front tire size: 445/45 19,5, rear tire size: 445/45 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 41585 Schmitz, SCB S3T * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Plain tarpaulin * Used tarpaulin * Edscha / Sliding roof cover * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing point perforation in the outer frame (Multilock outer frame) * Retractable lashing eyes * Pallet stop rail * Mechanically operated lift roof * DCE 9.5 Daimler Chrysler Certificate * Portal door * Aluminum side rails * Air connection, coupling head (red + yellow) * Connector plug, 2x7-pin * Connector plug, 15-pin * Lifting and lowering device * Ferry lashing system * Storage box / Tool box * Galvanized * Suspension: Air * Gross vehicle weight: 39,000 kg * Tare weight: 6,623 kg * Payload: 32,377 kg * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: Schmitz Rotos * Tire condition 1st axle: -- - Tire size: 445/45 R19.5 * Tire condition 2nd axle: -- - Tire size: 445/45 R19.5 * Tire condition 3rd axle: -- - Tire size: 445/45 R19.5 * Tire size: 445/45 R19.5 * Internal dimensions: L = 13,620 mm, W = 2,480 mm, H = 3,000 mm * Internal volume: 101 m³ * Pallet spaces: 34 * Aluminum plank tarpaulin * Second ride height Varios * 28 mm floor, 7,100 kg forklift axle load * On request, we will send you a video * Construction details and further images Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Pgodozurwhopfx Ai Djr Please contact our trained specialists, who will be happy to advise you.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, operating hours: 77,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TrumaBend V1700S / 4m bending length Year of manufacture: 2006 Press force: 1700 kN (170 tons), bending length: 4080 mm Machine operating time: 77,000 hours, hydraulic operating time: 48,000 hours Pgedpfx Aezrnrcei Dsr New IPC (KEBA 5) Configuration 1 active bending aid, 2 support consoles 4-axis back gauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 35,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TruBend 5170 / 4m bending length Year of manufacture: 2/2014 Press force: 1700 kN (170 tons), bending length: 4,080 mm Machine operating time: 35,000 hours, hydraulic operating time: 25,000 hours Pedpfx Ajzrnpuoi Djgr Control system: TASC 6000 Configuration: 1 active bending assistant, 2 support consoles 4-axis backgauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: used, Year of construction: 2010, 2 x Amada Astro HDS 1030/NTR press brakes, year of manufacture 2010, and Amada Astro III press brake, year of manufacture 2013. Pgedpfx Aijy Em Ule Der

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, pressing force: 100 t, stroke length: 200 mm, Equipment: CE marking, safety light barrier, For Sale: Bystronic Xact 100 CNC Press Brake (3.1m x 100T) Available immediately: A exceptionally clean, well-maintained Bystronic Xact 100 CNC Press Brake (2012 Model). This free-standing, down-stroking machine offers precision 4-axis bending with automated crowning, making it an excellent addition to any precision fabrication facility. Detailed technical specifications and machine configurations can be verified through the Bystronic Official Group Website. Machine Overview & Configuration Control system: Equipped with a Cybelec DNC 880S Control unit. Axis configuration: 4-Axis control plus crowning (Y1, Y2, X, R + Manual Z). Safety systems: Integrated Fiessler Laser Guards for optimal operator protection. Guarding package: Features full rear sliding screen guards and side guards. Wandering foot pedal/pedestal controls. Technical Specifications Parameter Measurement Bending Capacity1000 kN (100 Tonne) Working Length3100 mm Pgedpozta A Ajfx Ai Dsr Distance Between Frames2550 mm Throat Depth400 mm Maximum Stroke200 mm Rapid Approach Speed100 mm/s Working Speed1 – 10 mm/s Return Speed95 mm/s Overall Weight9000 kg Machine Identity Manufacturer: Bystronic Model: Xact 100Year of Manufacture: 2012 (Model Year 2012)

Condition: used, empty load weight: 6,075 kg, maximum load weight: 28,925 kg, overall weight: 35,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5, color: red, Year of construction: 2023, Equipment: ABS, Color: RAL 3002 Carmine Red Front/rear panel: Purple / white Extension ladder at the rear, door latch on the side Support wedges with holder, aluminum side impact protection, galvanized steel underride protection, quarter panel fenders in front of the 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection, Pallet stop on both sides, approximately 15-20 mm high, in a bolted design, loading height is reduced by approximately 15-20 mm, plastic toolbox Axles + Suspension SAF disc brake axles, "axle/chassis laser measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and starting assistance, Activation via "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no warranty for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing, spring brake parking brake, 2 fail-safe coupling heads in front, without connecting line, EBS, electronic braking system with EBS socket in front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm (in Mega Flex only at low ride height or saddle height), vehicle - driving stability system Wheels and tires 435/50 R19.5", manufacturer's choice, steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights in front 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets in front Floor Sieve-printed panels approximately 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / corner posts Psdpfx Aozun I Aei Degr 2,580 mm high, corner posts steel in volume design, release device for side tarpaulin on front wall, "Crash-Blocker," bottom inside at approximately 140 mm height with steel impact protection Intermediate supports 3 pairs of sliding supports, fully adjustable in length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of support positions Insertion slats 5 rows of wooden insertion slats Rear wall / corner posts Corner posts at the rear, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal rotary rod locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Fliegl sliding roof, sliding cover, end lift at the rear that can be folded up, with a cover that can be slid from back to front, L-shaped roof beam for the automotive industry, inner width between the roof beams approximately 2,490 mm, tarpaulin color: white, roof non-elastic, little deflection of the roof beam during loading and unloading, EcoLift - lifting roof can be raised by approximately 380 mm, on both sides, with gas spring support, 3 driving positions in the front: interior height in the front approximately 2900mm/ 2950 mm / 3000 mm Optimal rain strip at the rear, on top of the end rail, above the doors Fliegl manufacturer certificate for body strength according to EN 12642 XL, Fliegl manufacturer certificate for body strength accor

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer: Stöber, DC geared motor type C002NF-0047-PF112 -Speed: 0-641 rpm Pgjdpfjzn Nmasx Ai Dor -Engine: Type PF112 -Voltage: 160 V -Power: 0.6 kW -Shaft: Ø 20 x 40 mm -Dimensions: 395/160/H195 mm -Weight: 19.5 kg

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: N000615, functionality: fully functional, operating hours: 4,626 h, power: 14.8 kW (20.12 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 230 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 180 mm, table length: 3,220 mm, table height: 960 mm, throat depth: 420 mm, oil tank capacity: 295 l, total length: 4,360 mm, total width: 2,660 mm, total height: 3,050 mm, overall weight: 15,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, safety light barrier, See above. If you have any further questions or require additional details, please contact us directly. Pjdpfx Aiozkhvlo Degr

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Psdpow Hx Rzefx Ai Djgr Stand width 2600 mm Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp

Condition: good (used), Press force 35 tons Bending length 1200 mm Frame width 2600 mm Controlled axes Y1, Y2, X axis Control Elgo P8822 Psdpfew Hx Rnex Ai Dsgr

Condition: excellent (used), Brand: MVD Model: D320-3700 Tonnage: 320 Tons Working width: 3700 mm Year of manufacture: 2021 Pgsdpfx Aow Hx S Soi Dor Stroke: 410 mm Installation height: 615 mm Throat depth: 510 mm Controlled axes: Y1, Y2 and X+R+Z1+Z2+X5 axis Distance between uprights: 3200 mm Approach speed Y-axis: 210 mm/sec Control: Delem DA69T Safety: DSP Laser Safe Upper tool clamping: Wila NSCL hydraulic clamping Lower tool clamping: Wila NSCR hydraulic clamping and crowning

Condition: excellent (used), Year of construction: 2001, For sale LVD PPEB 80/25 in very good technical condition. Under power, can be inspected any time Pgodpfx Aerx S Hnoi Djr

Condition: used, empty load weight: 6,623 kg, maximum load weight: 32,377 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 08/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total length: 13,620 mm, suspension: air, tire size: 445/45 19,5, tire condition: 40 %, color: yellow, Year of construction: 2018, front tire size: 445/45 19,5, rear tire size: 445/45 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 41583 Schmitz, SCB S3T * Year of manufacture: 2018 * ABS, anti-lock braking system * EBS, electronic braking system * Air suspension * Plain tarpaulin * Used tarpaulin * Edscha / sliding roof tarp * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eye holes in the outer frame (Multilock outer frame) * Retractable lashing eyes * Pallet stop bar * Mechanical lifting roof * DCE 9.5 Daimler Chrysler certificate * Portal door * Aluminum side walls * Air connection coupling head (red + yellow) * 2x7-pin connecting plug * 15-pin connecting plug * Lifting and lowering device * Ferry lashings * Storage box / tool box * Galvanized * Suspension: Air Pedpfezt Htusx Ai Dogr * Gross vehicle weight: 39,000 kg * Tare weight: 6,623 kg * Payload: 32,377 kg * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: Schmitz Rotos% * Tire condition 1st axle: 30% -- 30% - Tire size: 445/45 R19.5 * Tire condition 2nd axle: 80% -- 30% - Tire size: 445/45 R19.5 * Tire condition 3rd axle: 30% -- 30% - Tire size: 445/45 R19.5 * Tire sizes: 445/45 R19.5 * Interior dimensions: L=13,620 mm, W=2,480 mm, H=3,000 mm * Interior volume*: 101 m² * Pallet spaces: 34 * Aluminum plank tarpaulin * Second ride height, Varios * 28mm floor, 7,100kg forklift axle load * Upon request, we will send you a video * Construction description and more pictures Disclaimer: Subject to changes, prior sale and errors You can find more pictures and videos on our homepage. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and easy financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transportation of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Condition: good (used), functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, pressing force: 130 t, Equipment: CE marking, FOR SALE: Amada HFE 130-3 L CNC Hydraulic Press Brake Pgedpjy Hf Tvofx Ai Djr Amada HFE 130-3 L – Heavy-Duty CNC Press Brake, 130 Tonnes We are offering a used Amada HFE 130-3 L CNC hydraulic press brake in [good / fully operational] condition. A well-built machine from Amada Europe, ideal for demanding sheet metal bending applications. Key Specifications ParameterValuePressing force1,300 kN (approx. 130 tonnes) Maximum stroke 350 mm Machine Details Year of manufacture: 2001 Condition: Good ! Tooling included Why Buy This Machine? The Amada HFE 130-3 L is a robust and precise hydraulic press brake built for high-volume industrial production. With 130 tonnes of pressing force and a generous stroke of 350 mm, this machine handles a wide variety of demanding bending tasks with excellent repeatability. Amada's renowned build quality ensures long service life and low maintenance requirements.

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Pgsdpfszun T Ssx Ai Dor

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Psdpfozun T Esx Ai Degr

Condition: ready for operation (used), A rack for DC power modules with two electrical housing units is available. Power module Phoenix Contact Charx Power 30kW, max. voltage AC/DC: 3x 530V/1000V, rated power: 30kW, efficiency: over 95%, dimensions X/Y/Z: approx. 483mm/134mm/550mm, weight: approx. 31kg. Including two electrical housing units. Documentation available. On-site inspection is possible. Pjdpfxsu Iztme Ai Djgr

Year of construction: 2002, condition: ready for operation (used), A repair-required Safan CNC press brake is available. Working width: 2050mm, press force: 400kN, ram stroke: 180mm, installation height: 450mm, closing speed: 90mm/s, working speed: 20mm/s, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2500mm, weight: approx. 5000kg. The tool clamping system of the machine is defective. Documentation available. An on-site inspection is possible. Podoyz Anajpfx Ai Djgr

Year of construction: 1992, condition: ready for operation (used), Press force: 135t, bending length: 3000mm, nominal bending length: 2600mm, frame width: 2600mm, throat depth: 250mm, ram stroke: 120mm, working speed: 7mm/s, machine weight: approx. 6800kg. An on-site inspection is possible. Pgjdpfey Hvrcox Ai Djr

Year of construction: 2005, condition: ready for operation (used), Clearance between the frames: 890mm, throat depth: 200mm, bending width: 1000mm, press force: 280kN, connected load: 5.5kVA, required fuse protection: 3x 16A, weight: 3.5t. An inspection on site is possible. Pgedszbb R Espfx Ai Djr