Used Deckel Dmu 50 for sale (694)

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 CNC Control: Heidenhain TNC 530 with DMG-specific MillPlus IT user interface Spindle taper: SK40 Operating hours: 54,981 h Travel distances: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: NC rotary table (Nikken) Large NC rotary table Tailstock Handwheel Inspection An inspection under power can be arranged at any time by appointment. Condition: Used condition consistent with age and prior usage Known defects: X-axis ball screw worn / overhaul required Y-axis suspected cable or motor damage Repairs completed: 2017 – Handwheel retrofit kit 2022 – Replacement of chip conveyor auger 2024 – New cylinder/ linear guide for tool magazine 2024 – New screen Further defects cannot be ruled out Important note / exclusion of liability Ncedpexxamxefx Afzjl The machine is explicitly sold as defective, without warranty, without guarantee and under exclusion of any liability for material defects. All technical information has been provided to the best of our knowledge but is non-binding. No liability is assumed for completeness, correctness, or up-to-dateness of the information. The sale is made as inspected and any subsequent negotiations are excluded.

Condition: good (used), DMU 60P hi-dyn, power-on 37,732 h, spindle 22,802 Nodexy T Uljpfx Afzecl

Condition: good (used), Year of construction: 2005, DMC 80U duoblock, year of manufacture 2005, CNC MillPlus IT, spindle 18,000 rpm, SK40 taper, 60-position automatic tool changer (ATC), coolant through spindle, serial no. 1147 000022 3, power-on hours: 42,344, spindle hours: 23,544 Nodpfx Ajxy T Hnofzecl

Condition: good (used), Year of construction: 2004, DMC 80 U, year of manufacture 2004, CNC MillPlus IT, spindle 18,000 rpm, SK40 taper, coolant through spindle, ATC 60 positions, machine number 1120 000170 3, power-on 41,449 h, spindle hours 21,015 h. Nedpfx Afjxy Tybszjcl

Condition: used, Year of construction: 1999, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 430 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 60 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm Ncedsxmagnopfx Afzel max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T

Condition: good (used), Year of construction: 2016, CNC MillPlus IT V610 – ERGOline, spindle 18,000 rpm, taper SK40, ATC 120 positions, coolant through spindle, SN 11690001133, weight 9,460 kg, power-on hours 20,295 h, spindle hours 8,688 h Nedpjxyi Dpefx Afzecl

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, 5-axis CNC machine (VMC) Ncodpfsw Rdl Djx Afzol DECKEL MAHO - DMU80P MACH-ID 9194 Make: DECKEL MAHO Type: DMU80P Control: HeidenHain TNC430 Year: 2000

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm Nedpfx Afju Ag Irezecl z-travel 800 mm control iTNC 530 Heidenhain Speed Mainspindle 50 - 18.000 min/-1 power capacity - main spindel 28 kW max. Torque 121 Nm tool taper HSK-A 63 Swivel range -30 / +180 ° table surface area dia. 900 x 700 mm max. table load 1.400 kg table speed 30 min/-1 rotatable C: 360 ° number of toolpositions 40 pos. tool taper HSK-A 63 max. tool diameter 230 mm max. tool length 450 mm max. tool weight 15,0 kg rapid traverse ( X / Y / Z ) 60 m/min Feed force ( X / Y / Z ) 13 / 13 / 9 kN weight of the machine ca. 13,0 t dimensions of the machine ca. 5,5 x 3,5 x 3,5 m total power requirement 68 kVA 5 Axis Machining Center - Universal DMG DECKEL MAHO - DMU 80 P duoBLOCK - Swivel-Milling-Head (B-Axis) - NC-Rotary Table (C-Axis) - Application Tuning Cycle ATC - WITHOUT clamping devices

Condition: used, Year of construction: 2003, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 125 Nm tool taper MAS BT 40 swivellable B: 103 ° feed: feed speeds 20 - 10.000 mm/min rapid traverse X-axis 26 m/min rapid traverse Y-axis 26 m/min rapid traverse Z-axis 20 m/min Resolution 0,001 mm input unit 0,001 mm work table: surface area 1.000 x 600 mm rotary table dia. 600 mm number of T-slots 8 / 1 T-slot - width 14 H12 / 14 H7 T-slot - distance 63 mm max. table loading capacity 350 kg rotatable C: 360 ° Tool-Presetter: number of toolpositions 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 315 mm max. tool weight 8 kg Ncodpfxevn Utce Afzel total wight max. 100 kg total power requirement 26 kVA weight of the machine ca. 6,7 t dimensions of the machine ca. 4,0 x 4,0 x 3,0 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 T - 5-Axis - controled NC-Swivel-Milling-Head ( B-Axis ) - Rotary Table integrated in Working-Table ( C-Axis )

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 600 mm z-travel 520 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper HSK-A63 table surface area 700 x 500 mm Swivel range B-Axis 0 - 180 ° Swivel range C-Axis 0,001 ° max. table load 350 kg center hole 30 H6 mm T-slots 7x 14H7 x 63 mm table turning speeds 21,5 rpm number of toolpositions 32 pos. max. tool length 315 mm max. tool diameter 105 mm Nedpfx Afsuntmdozjcl max. tool-dia with free toolbox 130 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 50 / 50 / 50 m/min feed speeds 20.000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN total power requirement 50 kVA weight of the machine ca. 8,5 t dimensions of the machine ca. 6,5 x 3,5 x 3,5 m 5 Axis-CNC-Machining Center DECKEL MAHO - DMU 70 eVolution - 5 Axis - NC-Swivel-Rotary-Table - Operating-Hours: Power-On: ca. 62.500h / Spindle: ca. 15.100h

Condition: used, Year of construction: 2002, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 kW Torque 130 Nm tool taper BT 40 DIN 69872 work table: table surface area 1.250 x 700 mm max. table load ca. 500 kg table diameter 700 mm T-slots 11x 14 x 63 mm max. table speed 15 min/-1 tool magazin: number of toolpositions 32 (2x 16) pos. tool taper BT 40 max. tool diameter 80 / 130 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg feeds: Nodovn Ur Sopfx Afzecl feed speeds 20 - 15.000 mm/min rapid traverse 12 m/min total power requirement 30 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 4,0 x 3,0 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 T - 5-Axis - Rotary table in Fixed-Table - Retrofitting to SK 40 optionally possible!

Condition: used, Year of construction: 2007, x-travel 730 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 Nedowpw E Nopfx Afzocl swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x 63 mm table diameter 600 mm rotatable C: 360 ° max. table load 500 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 40 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 5 Axis - NC-Rotary-Table - Swivel-MillingHead

Condition: good (used), Year of construction: 1997, Equipment: documentation/manual, Deckel DMU 80T Mill Plus Njdpfxju Hy E So Afzecl

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS Control: Heidenhain TNC 430 Travel distances X-axis: 1,250 mm Y-axis: 880 mm Z-axis: 800 mm Spindle Main spindle speed range: max. 12,000 rpm Nedpfx Aoxbz Snjfzocl Main spindle drive power: 15 / 10 kW Max. torque: 500 Nm Tool holder: SK 40 WORK TABLE Clamping surface: 1,500 x 1,050 mm Max. table load: 2,500 kg Number of T-slots: 10 T-slot width: 18 H7 mm T-slot spacing: 100 mm TOOLS Number of tool stations: 60 Max. tool diameter: 80 mm Max. tool diameter with adjacent station empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Max. total weight: 100 kg FEEDS Rapid traverse (X / Y / Z): 15 m/min Feed speed: 10,000 mm/min MACHINE DETAILS Space requirement & weight Required space: approx. 7.0 x 5.0 x 3.3 m Machine weight: approx. 16.0 t Total power requirement: 29 kW EQUIPMENT Documentation Chip conveyor Coolant system Tool changer Note: The transport rigging must be organized by the buyer.

Condition: excellent (used), Year of construction: 1999, x-path 1,250 mm y-path 880 mm z-path 800 mm Nedpfxjgypabj Afzocl Main spindle: Speed range - main spindle max. 12,000 min/-1 Drive power - main spindle 15 / 10 kW Table clamping area 1,500 x 1,050 mm Number of tool positions 30 pos.

Condition: ready for operation (used), Year of construction: 2011, Two CNC milling machines DMG are available. 1) Deckel Maho DMU 100 monoBlock, year of manufacture: 2011, travel X/Y/Z: 1150mm/710mm/710mm, tool positions: 32, rapid traverse: 30m/min, tool holder: SK40, speed: 18000rpm. Machine dimensions X/Y/Z: approx. 4250mm/3500mm/3300mm, weight: approx. 10000kg, control: Heidenhain iTNC 530, operating hours: 30521h, spindle hours: 15388h. 2) Deckel Maho DMU 60 monoBlock, year of manufacture: 2006, travel X/Y/Z: 730mm/560mm/560mm, tool positions: 24, rapid traverse: 30m/min, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2900mm/1900mm/2250mm, weight: approx. 7000kg, control: Heidenhain iTNC 530, operating hours: 39296h, spindle hours: 15305h. Documentation available. An on-site inspection is possible. Only package sale possible. Ncjdpfjxtpqvjx Afzsl

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 420 mm z-travel 500 mm spindle taper SK 40 table surface area 700 x 400 mm table load capacity 800 kg control Heidenhain TNC 426 rated capacity 40 kVA voltage 400 V weight of the machine ca. 6,5 t Njdsw Inrvspfx Afzocl dimensions of the machine ca. 3,4 x 3,7 x 2,9 m DECKEL-MAHO machining centres are suitable for manual and automatic operation. --> Area of application MILLING: --> DRILLING: --> Face milling --> Face countersinking --> Circular milling --> Circular drilling --> Screw milling --> Screw drilling --> Gear milling --> Profile drilling --> Profile milling --> Form drilling --> Form milling --> Including vertical tool changer with double gripper --> Tool magazine, variable space coding (VPC): --> Number of tools: 20 --> Standard tool - max. Ø: 90 mm --> Special tool - max. Ø with free neighbouring spaces: 140 mm --> Max. tool length from spindle nose: 300 mm --> Max. tool weight: 12 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 17,362 h, functionality: fully functional, machine/vehicle number: 15035703814, travel distance X-axis: 750 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain 426, spindle speed (max.): 18,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 520 mm Z-axis travel: 520 mm C-axis: available B-axis: available Controls Control: Heidenhain 426 Handwheel: Heidenhain HR410 Table Table size: 700 x 500 mm Ncodpfxsv R Ez No Afzol Max. table load: 350 kg Spindle Speed range: 20 - 18,000 rpm Tool holder: SK40 Tool capacity: 32 tools Feed rate & capacity Rapid traverse: 20,000 mm/min MACHINE DETAILS Connected load: 50 kVA On-time: 75,856 h Program runtime: 17,363 h EQUIPMENT - Rotating B and C axes - Coolant tank with Pump - various tools

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel Ncsdpfx Afsvt D D Uszjl - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: ready for operation (used), Year of construction: 2002, operating hours: 37,369 h, functionality: fully functional, machine/vehicle number: 1112.000594 3, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, table width: 1,000 mm, table length: 600 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Working Spindle Tool holder: SK 40 Worktable Clamping surface: 1,000 × 600 mm T-slot spacing: 63 mm Number of T-slots / size: 9 / 14 H7 Tool Magazine Magazine positions (2 × 12 positions): 24 pcs Tool diameter magazine 1: 130 mm Tool diameter magazine 2: 80 mm Tool length from spindle nose: 315 mm Tool weight for automatic tool change: 8 kg Total tool weight in magazine: 100 kg Main Drive Spindle speed: 12,000 rpm Tool holder: SK 40 Nedpfswx Ekxox Afzecl MACHINE DETAILS Control: Heidenhain TNC 426/430 Electrical Equipment Machine connection: 3N/PE–50/60 Hz, 400/230 V Standard current consumption: 38 A Standard power consumption: 26 kVA Standard fuse protection: 50 A Rated output: 35 UVA Transport Transport weight (machine with tool changer): approx. 6,700 kg Transport dimensions (L x W x H): approx. 3.50 x 2.70 x 2.21 m EQUIPMENT Tool changer included

Condition: good (used), Year of construction: 1999, operating hours: 52,964 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain MillPlus, spindle speed (max.): 12,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Control: Heidenhain MillPlus Table Table length: 1,100 mm Table width: 650 mm Table load: max. 800 kg Ncodpfx Aswnbqgjfzjl Feed rate X-axis: 20,000 mm/min Y-axis: 20,000 mm/min Z-axis: 20,000 mm/min Spindle Spindle mount: 40 ISO / BT / MK Spindle power: 15 kW Speed: max. 12,000 rpm Tool changer Number of tools: 24 Number of controlled axes: 3 MACHINE DETAILS Length: 3,400 mm Width: 2,400 mm Height: 2,800 mm Weight: 8,700 kg EQUIPMENT - 4th axis - Chip conveyor - Coolant system - Control cabinet

Condition: used, Year of construction: 2002, x-travel 880 mm y-travel 630 mm z-travel 630 mm table surface area 1250 x 700 mm NC-rotary table integriert, 700 mmø spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min control HEIDENHAIN control TNC 430 feeds x/y/z -stepless 20 - 15.000 mm/min rapid traverse 30 m/min ATC 32 (2 x 16) Pos tool diameter 80 / 130 mm Nodpetqqmbsfx Afzecl workpiece length 315 mm weight of tools max. 8 kg NC-rotary table - speed - max. 15 U/min table load 600 / 500 kg milling head -swivable +/- 12 / 90 ° total power requirement 60 kW weight of the machine ca. 9,6 t dimensions of machine L x W x H 4,53 x 2,60 x 2,50 m = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant

Condition: good (used), Year of construction: 2004, operating hours: 64,500 h, functionality: fully functional, machine/vehicle number: 1505709006, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 42,000 rpm, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, Machine in good condition, measurement protocol available TECHNICAL DETAILS Travel X: 750 mm Travel Y: 600 mm Travel Z: 520 mm Nodowrz Nwjpfx Afzscl Table Clamping surface: Ø 700 × 500 mm Central/max table load: 350 kg NC rotary-swivel table: 700 × 500 mm B-axis: 180° C-axis: 360° Spindle Spindle speed: 42,000 rpm Tool holder: HSK E50 Spindle cooler: available Control CNC control: HEIDENHAIN iTNC 530 Electronic handwheel: available Preparation for 3D probe HEIDENHAIN TS 641: without probe BA: 4 Tool management Tool changer: 60 positions Speed Rapid traverse: 50 m/min MACHINE DETAILS Machine dimensions (L × W × H): 3,200 × 2,650 × 2,800 mm Machine weight: 9 t Total power requirement: 50 kVA Power supply: 400 V Operating times Power-on hours: 141,300 h Spindle hours: 64,500 h Control on time: 146,100 h EQUIPMENT - 5-axis simultaneous HSC machining center - NC rotary-swivel table with B and C axes - Chip conveyor present - Electronic handwheel for manual operation - Laser for tool measurement - Prepared for 3D probe HEIDENHAIN TS 641 - Oil mist extraction integrated - Spindle cooling available - No internal coolant (IKZ) available

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 570035, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total length: 4,600 mm, total width: 5,500 mm, table width: 500 mm, table length: 700 mm, overall weight: 6,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 70 V, year of manufacture: 1996, serial no.: 570035, travel X/Y/Z): 710/520/520 mm, HEIDENHAIN control, max. spindle speed 12,000 rpm, 60-fold tool changer, compact filter system INTERLIT SUK200/900, year of manufacture: 1997, filling volume 900 l, filter surface 0.2 m³, chip conveyor, internal coolant supply Noderkz A Ijpfx Afzjcl Comment: 1 tool changer defective

Condition: excellent (used), Year of construction: 2006, operating hours: 35,319 h, functionality: fully functional, machine/vehicle number: 11460000643, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 10,000 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, input voltage: 400 V, type of input current: three-phase, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 125 P duoBLOCK, year of manufacture: 2006, operating hours (h): 35,319, serial no.: 11460000643, travels (X/Y/Z): 1,250/1,000/1,000 mm, spindle speed max. 10,000 rpm, 60-fold tool changer, B-axis, 190° swivel, HEIDENHAIN Mill Plus control, internal coolant supply, tool measuring system, chip conveyor, DMG filter system, serial no.: 13812-01560, DMG WK331 cooling unit. Nodpfx Ajrkz Tfefzocl