Tool room milling machine

DECKEL FP 4 MK

Condition: like new (used), functionality: fully functional, Tool milling machine Deckel FP 4 MK Isdpfjzvxlhsx Ap Deih Type 2203 Equipped with a hydraulic tool clamping system and central lubrication.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 320 mm, total height: 2,245 mm, total width: 1,340 mm, total length: 1,140 mm, table width: 240 mm, table length: 1,000 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, rotational speed (min.): 100 rpm, overall weight: 1,000 kg, working range: 650 mm, input voltage: 400 V, distance table to spindle center: 370 mm, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Drilling capacity in steel ----- 50 mm Milling capacity in steel ----- 25 mm Face milling capacity ----- 100 mm Longitudinal travel (X) ----- 585 mm Ijdjga Twfepfx Ap Djih Transverse travel (Y) ----- 185 mm Vertical travel (Z) ----- 320 mm Horizontal motor ----- 1.5 KW Vertical motor ----- 2.2 KW Horizontal milling spindle ----- 60 ~ 1350 rpm (9) Vertical milling spindle ----- continuously variable 100-600 / 350-2000 rpm Spindle mount ----- ISO 40 Table ----- 1000 x 240 mm Weight ----- 1000 KG INCLUDED * DELTA frequency inverter * 3-axis digital readout SINO * Automatic longitudinal and transverse feed of the worktable * LED lighting * Cooling system * Deluxe control cabinet * Tilting milling head left/right 0 - 45 degrees * Rotating worktable * Various holders in a case

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, Universal Tool Milling Machine DECKEL FP 4 MK With 3-axis active digital readout Heidenhain TNC 113 Year of manufacture: 1990 Travel range: X 500 Y 400 Z 400 mm Speed range: 50 – 2500 rpm Including the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Movable vertical milling head Extendable quill Iodpoyycagsfx Ap Doih Infinitely variable feed via potentiometer Hydraulic tool clamping GRESSEL hydraulic vise 125 mm Various SK 40 milling arbors Splash guard enclosure Automatic central lubrication pump for X, Y, Z axes Machine lamp Coolant device 4 machine feet Operating manual

Condition: excellent (used), Deckel FP 4 MK Deckel FP 4 MK machining center with Heidenhain TNC 113 control, manufactured in 1990. Fully overhauled by FPS in 2021. Excellent condition, CE compliant!! The machine comes from the prototype construction department of Castwerk Technologies. Technical data: Year of manufacture: 1990 Fully overhauled by FPS in 2021 Digital display: 3-axis active digital display HEIDENHAIN TNC 113 Travel in X-axis: 500 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm Tool holder: SK 40 hydraulic tool clamping, DIN 2080 Milling head type: Vertical milling head Spindle speed range: 50 - 2,500 rpm, 18 steps Table type: Tilting table Table clamping surface: 800 x 490 mm T-slot size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and equipment: Heidenhain TNC 113 control Hydraulic clamping, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating instructions for the control and programming examples Handwheels Coolant system About the machine: Offered is a Deckel FP 4 MK machining center with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Deckel on site while it is powered on. You can find more milling machines from well-known manufacturers on our website. Iiodjzy U E Eepfx Ap Doh

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition, CE compliant. Iodpezbb E Aefx Ap Doih Technical data: >> Year of manufacture 1990, machine no. 2102-5046 >> Fixed angular table >> Speed: 40 - 2000 RPM >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, parts list About the machine: Offered is a universal milling machine Deckel FP1 in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain control system, you can enter dimensions that the machine will automatically approach. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes the work easier and even more precise. Take the opportunity to inspect and test this machine on site under power.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Active Digital Readout in Light Grey, Very Good Condition, CE Compliant! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angle table >> Speed range: 50 – 2500 rpm Ijdpsw Evq Aefx Ap Deih >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on the spindle carrier >> Vertical quill and horizontal quill – ISO 40 taper >> Vertical quill extension: 90 mm >> Hydraulic drawbar system >> Weight approx. 1,600 kg Accessories and Features: >> 3-axis active digital readout (Heidenhain) >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operating manual, spare parts diagrams About the Machine: Offered is a Deckel FP4M Aktiv universal milling machine in very good condition, CE compliant. The machine has very little backlash in the handles, and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. It features a hydraulic clamping system. On this newer FP4 model, the feed is infinitely variable on all three axes, and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain linear control, you can input dimensions that the machine will approach automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and more precise. Take the opportunity to view and test the machine under power on site.

Condition: reconditioned (used), Year of construction: 1994, Universal milling machine Manufacturer: DECKEL Model: FP 4 MK Aktiv Year of manufacture: 1994 – refurbished, newly painted RAL 7035 light gray / RAL 7012 basalt gray RAL 5008 gray-blue Machine no.: 2203-8668 With warranty Iiodpfx Apsfzbtme Doh Geometric inspection with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip collection tray - Central lubrication, electric - Coolant system - Operating manual -used, as is-

Condition: good (used), Stock no.: 3010 Manufacturer: Deckel Machine number: 31488 Type / Model: FP 1 Travel paths x-y-z: 300 - 150 - 340 mm Table: 600 x 200 mm Speed range: 40 to 2,000 rpm Spindle taper: MK 40 Feeds: 16 to 500 mm/min Power supply: 1 / 1.5 kW Accessories/Equipment: Elesta digital readout Iiedpfx Apjw D N Ths Doh Condition: good Weight: 0.8 t Dimensions: 800 x 1,000 x 1,800 mm

Condition: new, Year of construction: 2026, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this Iodpoh R S Tcjfx Ap Djih FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 60 mm, total height: 1,935 mm, total length: 2,000 mm, total width: 200 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, overall weight: 1,445 kg, table length: 460 mm, workpiece weight (max.): 400 kg, table load: 400 kg, table width: 800 mm, year of last overhaul: 2013, warranty duration: 6 months, The machine was completely and professionally overhauled by us in 2013. We were able to repurchase the machine from a customer who had used it very little, and we fully serviced and inspected it. Control 3-axis - Active - Digital display HEIDENHAIN TNC 113 Speed 50 - 2500 rpm, geometrically stepped direct drive with 18 speed stages for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Rapid Traverse 1.3 m/min Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread, optionally: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes Ijdpfx Apeyitxqj Dsih X/Y/Z 500/400/400 mm Table Rigid angle table 800x460 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Central lubrication Options • Z-axis bellows • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-holder • etc.

Condition: used, Year of construction: 2006, x-travel 320 mm y-travel 240 mm Iodpfx Aewp S Sdep Doih z-travel 300 mm total power requirement 3 kW weight of the machine ca. 1 t