Used Deckel Fp 4 Ma for sale (678)

Condition: ready for operation (used), Deckel Maho tool holder for Deckel Maho FP4-60 milling machine, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Ibedpfx Acoy Np Ngeqea

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: Iodpfxeu Tuk Hj Acqjba For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) Ibedpfswhk Ubox Acqsa - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Year of construction: 1984. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 RPM - Power: 3.7 / 4.4 KW - Spindle brake Iodpeytb Uhofx Acqeba - Automatic feed: X-Y-Z, continuously adjustable, 6.3 / 630 mm/min - Rapid traverse X-Y-Z: 1300 mm/min - Fixed angle table - Vertical quill with 90 mm stroke - Tool holder: ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head - Machine manuals with spare parts list and electrical diagrams - Cabinet with accessories, see photos

Condition: good (used), Year of construction: 1986, travel distance X-axis: 710 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Isdoztpx Tjpfx Acqjba Speed: 6300 rpm Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, DECKEL FP4M Universal milling machine (1984) Serial number: 2203-1545 Control: HEIDENHAIN POSITIP 855 Travel distances: Iodpfx Ajzmhlfjcqoba X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Rapid traverse rate: 1300 mm/min Feed rate: 8 – 630 mm/min Table dimensions: approx. 800 x 460 mm Max. table load: approx. 600 kg Spindle speed range: 50 - 2500 rpm Tool holder: SK40 Without machine vice.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Universal milling machine DMG FP4M Special Edition With 3-axis digital display ND7013 by Heidenhain, in new condition, Made in Germany, CE compliant!!! Technical data: >> Year of construction 2022 >> Fixed angular table, clamping area 480x800 mm >> Spindle drive, speed range 25-3000 rpm, stepless adjustment with input on the control panel >> Controlled main drive 6 kW >> Vertical milling head, swiveling +- 90 degrees (180 degrees) >> Linear axes, feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters Ibjdpszung Ejfx Acqsa >> Weight approx. 1600 kg Accessories and equipment: >> Heidenhain digital display ND 7013 >> Coolant system >> Minimum quantity lubrication >> Central lubrication >> Machine feet >> Operating manual, etc. About the machine: Offered is a universal milling machine DMG FP4M Special Edition with a 3-axis digital display by Heidenhain ND 7013, in new condition. A reliable and user-friendly machine, Made in Germany. An oil change has been performed. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered on.

Condition: used, Year of construction: 1990, x-travel 0600 mm y-travel 500 mm z-travel 500 mm table-size 500 mm feed range 2- 10.000 mm/min rapid traverse 10 m/min Tool bore ISO 40 turning speed range 0- 6300 U/min main drive DC 8 kW CNC control Dialog 11 total power requirement 23 KVA weight of the machine ca. 5050 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area, Ijdpfjyq Sk Uex Acqjba rotary table as a 4th axe and ATC with 40 Positions. Machine has been refurbished by FPS in 2010.

Condition: good (used), Year of construction: 1987, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,200 mm, overall weight: 1,800 kg, workpiece weight (max.): 400 kg, 3 Axis digital read out Active digital read out Fixed table 800 x Central lubrication Coolant system with pump X-Axis: 500mm Y-Axis: 400mm Z-Axis: 400mm Table Length: 800mm Table Width: 460mm Table load: 400 Spindle speeds: 2500Rpm Feed rate X-Axis:1300mm/min. Feed rate Y-Axis:1300mm/min. Feed rate Z-Axis:1300mm/min. Stroke pinole: 90mm Length: 2200mm Width: 2100mm Height: 2100mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ibedpfjzdf Efjx Acqsa

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Ibjdpfx Aewrdu Ascqea Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Year of construction: 1987, condition: ready for operation (used), Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment. Isdpfxexyk Upo Acqoba

Year of construction: 2008, condition: ready for operation (used), A universal tool milling machine by Friedrich Deckel, overhauled in 2008 and originally built in 1989, is available. Travels X/Y/Z: 560mm/500mm/450mm, table dimensions X/Y: 900mm/530mm, max. table load: 450kg, tool taper: SK40, quill stroke: 80mm, milling head swivel: +/-90°, spindle speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Ibodpfx Acezqu E Hoqsa

Condition: not inspected (used), Year of construction: 1986, feed length X-axis: 580 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, spindle speed (max.): 2,500 rpm, Grunding Contour 2 table 800x460 mm travel 580x400x450 mm max spindle speed 2500 rpm spindle taper 40 Isdpfxsy E N Dvo Acqoba

Condition: used, machine/vehicle number: 2810 - 4271, x-travel:500 mm y-travel:400 mm z-travel:450 (390) mm surface of table:710 x 430 mm spindle speed max.:40 - 4000 U/min feed range:10-2000 mm/min rapid traverse:4,0 m/min spindle drive motor:4,0 kW tool taper:SK40 control:CNC Contour 3 power capacity:9 kW weight of the machine ca.:2 t Ibedpfxjh Ra Ize Acqja dimensions of the machine ca.:2,4 x 2,3 x 2,3 m Deckel FP4 NC Machine for Medium - Heavy range use. - Spindle Head can be swiveled 90° (left or right) - Universal Work Table ( 710 x 430 mm ) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872. - Deckel Contour 3 CNC control Systems. - Portable Electronic handwheel and Handheld operating unit for easy Setting and control. - Powerful 2.2 kw Siemens Axis Servo motors and 4.0 kw Motor for Main Spindle. The machine has Central Lubricant system, Seperate Power cabinet, Enclosed Chip tray and Splash cabin

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP4M Active Manufacturer: Deckel Type: FP4M Condition: used, good Digital readout: 3 - axis digital readout Heidenhain Travels: Ijdpfx Aszgvmdscqoba X - axis: approx. 500 mm Y - axis: approx. 400 mm Z - axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 - 2500 rpm Tool holder: ISO 40 Hydraulic tool clamping Drive power: approx. 6.0 kW Feed rates & rapid feeds: in all 3 axes Feed range: approx. 8 - 630 mm/min Rapid traverse: approx. 3.0 m/min L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg Machine light Spindle guard Scope of delivery: - 10x tool holders - Allmatic high-pressure vice - documentation - Spindle guard

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 20031, CNC milling machine with rotary table and tool changer Control system: Contur 3 Tool holder: SK 40 Accessories: Vise, drilling head Ibodpfxezlkw Ie Acqoa Wiring diagrams and documentation available.

Condition: used, Year of construction: 2013, CNC milling machine DECKEL FP4CC/T, serial number 2824-0124, modernized in 2013, travel ranges XYZ = 550 x 500 x 450 mm, with driven rotary table, control system DECKEL Dialog 11. Ibedpfx Aszlpkajcqja

Condition: used, CNC milling machine DECKEL FP4AT, serial number 2832-1198, travels XYZ = 560 x 500 x 450 mm, 20-position tool changer, control system DECKEL Dialog 11. Isdpfozlphfox Acqeba

Condition: good (used), Year of construction: 1984, functionality: fully functional, Travel range X: 500 mm Travel range Y: 400 mm Travel range Z: 400 mm Spindle speed: 31.5 – 2000 rpm Tool holder: SK 40 with S20x2 draw-in thread Table type: Fixed table Isdpfx Acozi Uy Ueqeba Table clamping surface: 700 x 330 mm Weight: 1600 kg Dimensions: approx. 1700 x 1300 x 1900 mm Paint finish: RAL 6011 Reseda green Digital display: 3-axis HEIDENHAIN Accessories: Central lubrication, coolant tank, other accessories available upon request.

Year of construction: 1990, condition: good (used), Various collet chucks and holders, approximately 300 pieces. Isdpfx Acjhvz Iioqjba For DECKEL milling machines FP1 - FP2 - FP3 - FP4 Individual sales upon request.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, total length: 800 mm, table width: 460 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, warranty duration: 3 months, Equipment: documentation/manual, We are offering this fully overhauled Deckel FP4 M milling machine, year of manufacture 1985. Manufacturer: Deckel Model: FP4 M Iedpfxjx Sllpj Acqeba Year: 1985 Condition: overhauled Control: TNC113 Aktiv control Optional: universal table with a clamping surface of 800mm x 370mm If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Year of construction: 1983, Technical details: Ibedpfxjwgdz Ej Acqoa x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Paint Finish in Light Grey, CE Compliant!!! Technical Specifications: - Year of manufacture: 1987 Machine no.: 2203-2790 - Rigid angle table (freshly planed) - Spindle speed: 50–2500 rpm - Feed rate: 8–630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel X/Y/Z: 500/400/400 mm - Vertical milling head on column adjustable by 150 mm - Vertical and horizontal quill – SK40 - Vertical quill extendable by 90 mm Ibodpfx Acsxctyaoqoa - Drawbar thread: M16 - Weight approx. 1500 kg Accessories & Features: - 3-axis Heidenhain digital readout - Coolant system - Chip tray - Central lubrication system About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine has been partially overhauled, displays minimal backlash on the handwheels, and all lead screws move smoothly and evenly. Even at maximum speeds, the milling machine runs quietly. Rapid traverse is available on all axes; all bellows are new. The rigid angle table has been freshly planed. This is a reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: Ibodpfx Aju Nvwvocqsa >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Active Digital Readout in Light Grey, Very Good Condition, CE Compliant! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angle table >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on the spindle carrier Iedpfx Acew Evq Asqsba >> Vertical quill and horizontal quill – ISO 40 taper >> Vertical quill extension: 90 mm >> Hydraulic drawbar system >> Weight approx. 1,600 kg Accessories and Features: >> 3-axis active digital readout (Heidenhain) >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operating manual, spare parts diagrams About the Machine: Offered is a Deckel FP4M Aktiv universal milling machine in very good condition, CE compliant. The machine has very little backlash in the handles, and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. It features a hydraulic clamping system. On this newer FP4 model, the feed is infinitely variable on all three axes, and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain linear control, you can input dimensions that the machine will approach automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and more precise. Take the opportunity to view and test the machine under power on site.