Used Deckel Fp4At for sale (689)

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. Dwsdpfewqdtpjx Ah Ujd The machine can be viewed under power. The machine is bought as is. No warranty.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 11035509414, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain TNC 426, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the specified period from 01/12/2025 to 05/12/2025! TECHNICAL SPECIFICATIONS Travel Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid Traverse & Feed Rates Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate X-axis: 10,000 m/min Feed rate Y-axis: 10,000 m/min Feed rate Z-axis: 10,000 m/min Djdpfxjxp Nnme Ah Uowd Maximum spindle speed: 9,000 rpm Work Table (Rotary table with tilting axis) Table width: 500 mm Table length: 700 mm Table load capacity: 200 kg Tool Holder Diameter: 40 mm Tool length: 290 mm Tool weight: 6,000 g Number of magazine tool holders: 16 MACHINE DETAILS Control: Heidenhain TNC 426 Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,400 mm Electrical Data Total weight: 3,000 kg Input voltage: 400 V Type of power: Three-phase current EQUIPMENT Documentation/manual WNT machine vice (jaw width: 125 mm) Lot of SK 40 tool holders Cutting tools Workshop cabinet with accessories

Condition: used, Motor output 3 kW Dwjdpfsv Nq Skex Ah Ued total power requirement 3 kw Weight 1.400 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1150 mm y-travel 710 mm Dwsdpfx Ahew I A Eks Uod z-travel 710 mm table surface area 1500 x 800 mm table load 800 kg tool taper SK 40 spindle turning speed - stepless 20 - 12000 U/min feeds -stepless- 0 - 30000 mm/min main drive motor 15 / 10 kW Additional information 5-Axis Universal Machining Center Equipment: CNC-control HEIDENHAIN iTNC 530 (5-axis simultaneous) NC rotary table (4th-axis), diameter 800 mm, integrated into the fixed table Controlled milling head (B-axis), swivel range -120/+30 deg. ATC 32-positions (2 x 16) Chip conveyor Coolant system for external cooling, no internal cooling

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,243 h, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Number of axis 4 Tools Number of index 100 Type of tool holder HSK 63 Additional Equipment 40 bar IKZ Dwsdjxuw Hzepfx Ah Uod This 4-axis DMG DECKEL MAHO DMF 300 was manufactured in 2003. It features a vertical machining center with 100 ATC tools, HSK 63, and a 40 bar IKZ. Consider the opportunity to buy this DMG DECKEL MAHO DMF 300 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2002, HEIDENHAIN TNC 430 control Spindle speed 20–9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Tool holder SK 40 Dedpfx Aswglfxjh Uswd 16-station tool changer Rotary table with B and C axes Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement

Condition: used, functionality: fully functional, x-axis travel: 400 mm y-axis travel: 220 mm z-axis travel: 400 mm Speed range: 40 - 2000 rpm Speed steps: 18 Internal taper: SK40 Spindle head movement automatic/manual: 190 / 200 mm Clamping surface (table): 730 x 240 mm Table longitudinal travel automatic/manual: 390 / 400 mm Dwedpexvc A Refx Ah Usd Table vertical travel automatic/manual: 390 / 400 mm Feed range: 8 - 400 mm/min Rapid traverse: 1200 mm/min Electronic digital display SONY Rotary table Sheet steel cabinet with 5 drawers and various machine accessories, e.g. various spare parts, tool holders, milling cutters, exchangeable table

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11035534144, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment term is one week after purchase of the machine! Bidding obligates the buyer to collect the machine on time between 17.11.2025 and 21.11.2025! TECHNICAL DETAILS Djdpexm T I Esfx Ah Uswd Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate in X, Y, and Z axes: 10,000 mm/min Maximum spindle speed: 9,000 rpm Tool holder: SK 40 Max. tool length from spindle nose: 290 mm Max. tool weight with automatic tool changer: 6 kg Max. total tool weight in magazine: 50 kg Clamping area: 700 x 500 mm Rotary range: 360° Swivel range: +95/-10° Permissible worktable load: 200 kg MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & weight Dimensions (L x W x H): 2,300 x 2,000 x 2,300 mm Total weight: 5,000 kg EQUIPMENT 16-position tool changer Rotary table with swivel axis Mechanical table plate clamping Note: The machine vices shown on the table are not included in the scope of delivery.

Condition: used, x-travel 400 mm y-travel 250 mm tool taper ISO 40 turning speeds 40 - 3.150 U/min table dimensions 630 x 300 mm table load 150 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dsdpjxu Nxpefx Ah Uowd Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 Dwjdpfew Hybusx Ah Uod spindle turning speed range 1 - 8000 rpm max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: like new (used), Year of construction: 2005, operating hours: 48,898 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 2,000 kg, total height: 3,400 mm, total length: 6,000 mm, total width: 4,500 mm, rotational speed (min.): 30 rpm, overall weight: 15,800 kg, spindle speed (min.): 18,000 rpm, number of slots in tool magazine: 40, Year of construction: 2005 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1000 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) A-axis degrees: 130º B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1100x900 Max. workpiece weight kg: 2000 Table rotation speed rpm: 30 Spindle Spindle speed rpm: 18000 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 High-pressure bar: 40-80 Tool system Tool holder: HSK-A 63 Tool magazine slots: 40 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter Dwjdjxur Sxjpfx Ah Uod 3D quickSET Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 144180 Spindle Working: 48898 Rated power kVA: 65 Basic machine dimensions / weight Length mm: 6000 Width mm: 4500 Height mm: 3400 Weight kg: 15800

Condition: good (used), Internal item no.: 25029 Universal milling machine Deckel FP1 Dwjdpfx Ahjwvgcde Ujd 3-axis active digital readout (Heidenhain TNC113) Year of manufacture: 1987 Spindle taper: SK40 (S20x2) Travel: X 300 / Y 160 / Z 340 mm Speed: 40 - 2000 rpm (2 gearbox ranges) Infinitely variable feed. The machine is in a well-maintained condition and can be inspected under power on site. Including extensive accessories: - Operating manual / Electrical diagram / Spare parts list - Deckel drawer cabinet - SK40 tool holders (S20x2) - Counter-support - Coolant pump

Condition: good (used), Glass scale, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -Manufacturer: Heidenhain, glass scale from milling machine Deckel FP4L -Type: LS 803 ML 470 mm -Quantity: 1x glass scale available -Price: per piece -Dimensions: 575/200/H30 mm -Weight: 0.6 kg/piece Dedpfouuu Hfjx Ah Uowd

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2881-0191, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS DIALOG 112, spindle speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! Payment is due one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL SPECIFICATIONS Travel X-axis: 700 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Feed rate X, Y, Z: 1 - 10,000 mm/min Rapid traverse X, Y: 30 m/min Rapid traverse Z: 20 m/min Dwodoxm Ty Ispfx Ah Ued Setup mode speed X, Y, Z: 1 - 2,000 mm/min Table width: 550 mm Table length: 900 mm Table load: 800 kg Max. setup height: 600 mm Distance spindle nose to table: 150 - 650 mm Max. spindle speed: 8,000 rpm Tool magazine positions: 40 Holder diameter: 40 mm Tool holder: SK 40 Max. tool diameter for standard tools: 80 mm Max. tool diameter for special tools with free adjacent slots: 140 mm Max. tool diameter for boring heads with free adjacent slots: 200 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 12 kg Control model: SIEMENS DIALOG 112 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,300 x 2,900 mm Total weight: 8,000 kg EQUIPMENT Documentation/manual Chip conveyor Note: The magnetic clamping plate shown on the table is not included in the scope of delivery.

Condition: excellent (used), functionality: fully functional, Equipment: chip conveyor, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain with chip conveyor Technical data: Dwsdevyr N Sjpfx Ah Ued >> Year of manufacture 2000 >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Number of tools 16 >> Table Ø700x500mm >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system >> Power connection 400V kVA 17 About the machine: Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T has a chip conveyor. Take the opportunity to view and try out the machine on site with power on.

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm table load max. 200 kg Dwedpfx Ahexl Tcge Uod tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a research centre. Equipment: 3-axis active digital readout made by Heidenhain TNC 113 Fixed angle table Coolant equipment Kelch mounting block Machine vise Counterholding device for the horizontal spindle

Condition: like new (used), Year of construction: 2015, operating hours: 26,156 h, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Siemens 840D, workpiece length (max.): 850 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 500 kg, total height: 3,100 mm, total length: 4,150 mm, rotational speed (min.): 1,200 rpm, spindle speed (min.): 12,000 rpm, Year of manufacture: 2012 CNC Control: Siemens 840D Axes X-axis travel (mm): 600 Y-axis travel (mm): 700 Z-axis travel (mm): 600 C-axis indexing (degrees): 360° (0.001) B-axis indexing (degrees): -30°/180° (0.001) Feed rates (m/min): 60 Rapid traverse (m/min): 60 Axis acceleration (m/s²): 6/6/5 NC Milling/Turning Table: Number of pallets: 2 Pallet dimensions (mm): Ø630 Max. workpiece size (D x H) mm: Ø630x850 Max. workpiece weight (kg): 500 Table rotation speed (rpm): 1200 Dodjxuiibjpfx Ah Ujwd Spindle Max. spindle speed (rpm): 12,000 Spindle drive power (kW): 35/24 (40% duty cycle / continuous) Spindle torque (Nm): 111/77 Cooling Coolant supply through spindle (bar): 40 Tank capacity (liters): 980 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 60 Tool changer type: Double gripper With free adjacent positions (mm): 120 With occupied adjacent positions (mm): 80 Max. tool length (mm): 450 Max. tool weight (kg): 15 Chip-to-chip time (sec.): 4 Equipment Electronic handwheel Chip conveyor Infrared probe Rotating viewing windows Rinsing gun Operating mode 4 Compressed air through spindle selectable via M-function NC rotary swivel table 3D quickSET MPC – Machine Protection Control Machine running hours: Power-on hours: 26,156 Spindle working hours: 16,472 Base machine: Dimensions/Weight Length (mm): 4,150 Height (mm): 3,100 Weight (kg): 10,000

Condition: good (used), Internal item no.: 25031 Dedpfx Ahowvi Ddo Uswd Universal dividing head Manufacturer: Deckel Mount: SK40 Drawbar: S20x2 3 indexing plates (33-46 / 27-43 / 36-58) Tailstock

Condition: not inspected (used), operating hours: 28,461 h, functionality: unexamined, machine/vehicle number: 28850008692, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK 810 D, table load: 500 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline is one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel X-axis: 630 mm Travel Y-axis: 500 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Feed rate X-axis: 0–30,000 mm/min Feed rate Y-axis: 0–30,000 mm/min Feed rate Z-axis: 0–30,000 mm/min Tool holder: SK 40 Number of tool positions: 24 Table width: 500 mm Table length: 800 mm Max. table load: 500 kg Loading height: 850 mm MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & Weight Djdpfx Ahexm Tu Ee Uswd Dimensions (L x W x H): 3,000 x 2,400 x 2,400 mm Total weight: 8,000 kg Operating hours: 28,461 h

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m Dwjdpfx Ahsr Hbf Te Ued >> Coolant device >> Power connection 400V 32A About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: R0101, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 2,000 rpm, table length: 1,000 mm, table width: 520 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel distances X-axis travel: 800 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Spindle Maximum spindle speed: 2,000 rpm Minimum spindle speed: 25 rpm Chuck diameter: 40 mm Work table Dedpsxm Scuofx Ah Uewd Table width: 520 mm Table length: 1,000 mm MACHINE DETAILS Dimensions (L x W x H): 2,500 x 2,000 x 1,800 mm EQUIPMENT Collets Additional milling table (table dimensions: 700 x 240 mm) Large machine vice (jaw width: 200 mm)

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A Dsdper Hbf Eofx Ah Uewd About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 278, workpiece weight (max.): 50 kg, grinding wheel diameter: 150 mm, grinding length: 340 mm, rotational speed (max.): 8,000 rpm, workpiece diameter (max.): 250 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bids are binding and require collection within the period 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Max. grinding wheel diameter: 150 mm Speed range: 1,000 – 8,000 rpm Workpiece spindle taper: SK 50 Max. workpiece weight: 50 kg Max. diameter: approx. 250 mm With tailstock: max. 125 mm Max. length: approx. 500 mm With tailstock: max. 250 mm Max. grinding length: 340 mm X-axis grinding stroke: 340 mm Y-axis traverse: 240 mm Z-axis traverse: 240 mm A-axis speed: 120 rpm A-axis swivel range: 360° C-axis speed: 20 rpm C-axis swivel range: 197° MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,400 mm Total weight: 2,500 kg Dsdsxm Rnvspfx Ah Ujwd EQUIPMENT Coolant filtration system Oil mist extraction Documentation

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Dsdpfxsu Um Ers Ah Ujwd Technical data: >> Year of construction 1990 Machine no. 2102-5046 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan Gojs3G About the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Djdpfx Ahstwlwzs Uowd Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.