Used Deckel S 11 for sale (688)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA Gbsdoz Rpcropfx Al Usu weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: reconditioned (used), Year of construction: 1988, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1988 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Machine no.: 88-6730 Guarantee: 12 months single shift from delivery For machines located outside of our Northern Bavarian sales area, the travel costs are to be borne by the customer. Accessories: - Machine stand - Integrated dust extraction Gbedpjlxpfmefx Al Uou - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or pulling the power plug incl. production of a mounting adapter plate Used as seen The machine is technically corresponding to the state of the year it was built.

Condition: used, turning speed range - grinding spindle 4500 U/min max diameter of the vice bore 17,5 mm max. radius to grind max. 10 mm max. lateral adjust. of milling cutter 10 max. longitudinal adjust. of milling cutter 40 max. angle for relief grinding 45 Grad weight of the machine ca. 125 kg Operating instructions available including collet set, grinding wheel flange wrench and the following special accessories: - Aluminium oxide grinding wheel - 3 diamond grinding wheels, different versions - 1 additional grinding wheel holder with diamond grinding wheel Gsdpfx Aljwlvrgo Uebu - Dressing diamond - Grinding dust cover

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2882-0275, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller manufacturer: Deckel Maho, controller model: Dialog 112, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, workpiece weight (max.): 1,250 kg, total height: 2,900 mm, total length: 3,900 mm, total width: 4,100 mm, table width: 800 mm, table length: 1,250 mm, table load: 1,250 kg, rotational speed (max.): 8,000 rpm, overall weight: 9,100 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 10,000 W, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, For sale is a vertical CNC machining center, Deckel Maho DMC 100 V, manufactured in 1998. The machine is in good condition and fully functional. Technical data: Manufacturer: Deckel Maho GmbH Type: DMC 100 V Year of manufacture: 1998 Serial number: 2882-0275 Travel in X: 1,000 mm Travel in Y: 800 mm Travel in Z: 700 mm Table size: approx. 1,250 × 800 mm Table load: approx. 1,250 kg Spindle speed: up to 15,000 rpm Tool holder: SK 40 Tool magazine: 30 positions Operating voltage: 400 V / 3-phase Rated current: 70 A Weight: approx. 9,100 kg Gbedpfsz I R Euex Al Ueu If you are interested or have any further questions, please do not hesitate to contact us. Location: 30827 Garbsen.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) Gedpfx Ajzw Tw Ujl Uebu High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Dimensions: Gbjdjuuh Suopfx Al Uju 38*68 cm Height: 25 cm

Condition: good (used), functionality: fully functional, Internal article number: 26090 Rotary table top Diameter: 380 mm Direct and indirect division possible Well-maintained original condition Gjdpfsz Hauvjx Al Uebu Minor milling marks on the surface, but these are not deep. The rotary table comes from an educational institution and is in a well-maintained condition.

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm Gbjdpfx Ajz Rn E Eol Usu z-travel: 800 mm control: HEIDENHAIN iTNC 530 power capacity - milling spindle: 28 / 19 kW tool taper: HSK 63 Tool changer: 40 pos. rotary table diameter: 900 x 700 mm table load capacity: 1.400 kg turning speeds: 12.000 1/min rapid traverse: 60 m/min : 62 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 4,1 x 3,2 x 3 m 5-axis simultaneously machining center, NC-round-table, B-axis, internal coolant supply 40 bar 600l incl. paperfilter, chipconveyor, mode 4, ROTOCLEAR, 3 D touch probe HEIDENHAIN TS 641 (defect), air blast through spindle, el. handwheel, BLUM laser, flushgun, oilmist suction, accessories: toolholders, clamping tools, vices (see photo) approx. 64.300h "machine on", approx. 25.700h "spindle on" in total, last spindle change in 2019 *

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Spindle speeds: 40 - 2000 rpm, SK 40. Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Accessories: Universal table, electric central lubrication system, coolant system, collet set, 5 tool holders, Röhm machine vise, swarf drawer. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Free loading at D-88433 Schemmerhofen. Gbodpezx Ep Sofx Al Uou

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg Gbjdpevt D D Uefx Al Ueu good condition

Condition: good (used), Year of construction: 2019, operating hours: 18,400 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 700 mm, total height: 2,700 mm, total length: 6,335 mm, total width: 4,600 mm, table load: 1,500 kg, overall weight: 16,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 20 rpm, operating hours of spindle: 11,370 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Travel ranges & dynamics • X-axis: 2,600 mm • Y-axis: 700 mm • Z-axis: 700 mm • Rapid traverse rate / feed rate: 40 m/min Work table (fixed table) • Clamping area: 2,900 x 700 mm Gbjdpfx Aez Indhjl Ueu • Max. table load: 2,150 kg Milling spindle (standard configuration) • Max. speed: 15,000 rpm • Drive power (40% duty cycle): approx. 18.9 – 20 kW • Tool holder: SK 40 Tool magazine • Tool positions: 30 • Max. tool length: 300 mm

Year of construction: 2000, operating hours: 47,085 h, condition: good (used), functionality: fully functional, machine/vehicle number: 42272, Machining center with 5 pallets TECHNICAL DETAILS Gbjdpfjlrupasx Al Usu x-axis travel: 600 mm y-axis travel: 560 mm z-axis travel: 560 mm B-axis (table): 360° Tool holder: SK 40 Pallet size: 5 x 500x400 mm Control system: Siemens 840D MACHINE DETAILS Supply voltage: 300 V / 3 phases / 50 Hz Power: 60 kVA

Condition: ready for operation (used), Deckel Maho 2238-4630 rotary table SN: 0174 for FP4-60 machine – diameter: 63cm / height: 43cm, used, normal signs of wear, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Gbsdjy Np Naepfx Al Uou

Condition: excellent (used), Year of construction: 1999, X-axis travel: 1,250 mm Y-axis travel: 880 mm Z-axis travel: 800 mm Main spindle: Speed range – main spindle, max. 12,000 rpm Drive power – main spindle: 15 / 10 kW Table surface area: 1,500 x 1,050 mm Number of tool positions: 30 Gsdpfx Aljgypabs Ujbu

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Gbedpfxjzxwz To Al Ueu Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Can be inspected while powered on. Free loading D - 88433 Schemmerhofen

Condition: ready for operation (used), Year of construction: 2007, operating hours: 71,852 h, functionality: fully functional, machine/vehicle number: 15145361464, table length: 4,000 mm, overall weight: 32,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 39,785 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: documentation/manual, DECKEL MAHO DMF 360 Linear – CNC Machining Center Year of manufacture: 2007 Control: Siemens CNC control Machine type: 3-axis CNC vertical machining center The DECKEL MAHO DMF 360 Linear is a high-quality CNC machining center designed for precision milling and machining of complex components. The machine features a rigid and stable construction, linear drive technology and Siemens CNC control, providing high accuracy, excellent surface quality and reliable operation. The DMF 360 Linear offers a large working area and is suitable for a wide range of machining applications, including milling, drilling, tapping and contour machining. Main features: Manufacturer: DECKEL MAHO Model: DMF 360 Linear Year: 2007 CNC control: Siemens 3-axis machining Linear drive technology Vertical machining center Suitable for precision milling, drilling and tapping Rigid construction and high machining accuracy Suitable for single-part production as well as series production Gbedpfx Aloz I D E Us Ueu The machine is a reliable and versatile solution for metalworking companies looking for a high-quality CNC machining center with Siemens control.

Condition: good (used), Year of construction: 2011, operating hours: 46,500 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 3,600 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, nominal power (apparent): 130 kVA, controller manufacturer: Siemens, controller model: 840SE, workpiece length (max.): 3,600 mm, workpiece width (max.): 1,100 mm, workpiece diameter (max.): 1,100 mm, workpiece weight (max.): 5,000 kg, total height: 3,042 mm, total length: 9,280 mm, total width: 4,608 mm, table width: 1,100 mm, table length: 4,200 mm, table load: 5,000 kg, rotary table diameter: 1,050 mm, rotational speed (max.): 50 rpm, overall weight: 32,050 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 21,500 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 120, mount diameter: 1,050 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, DMF 360 linear, manufactured in 2011, with Siemens 840D Solutionline control 120-position tool changer HSK 63 tool interface Spindle speed 18,000 rpm Chip conveyor Coolant system, 1000 liters, 80/40 bar Work area enclosure 3D probe, Heidenhain Blum laser Handwheel Air blow through the spindle Coolant nozzle Automatic doors A-axis, Lehman EA 420 Hydraulic clamping system for rotary table Robot interface Gedpfx Aljz Riy Rj Uobu Oil and emulsion mist separator

Condition: used, well-maintained universal milling table for Gsdpfx Aloz A Hlys Uobu DECKEL milling machine.

Condition: excellent (used), Special accessories for DECKEL SO + SOE tool grinding machines: - 1 milling cutter special holder in very good condition o for grinding shank milling cutters with a diameter of 16 – 25 mm and with a Morse taper socket MK 1, MK 2 + MK 3 o Milling cutters with a shank diameter of 25 mm can be directly inserted o Through-hole max. 25 mm Price: €950.00 net - New collets for milling cutter special holder: - 1 set of collets for milling cutter special holder, inner diameter Ø 16, 18 and 20 mm, price: €129.00/piece net - 1 set of collets for milling cutter special holder, inner square □ 8, 10 + 12 mm, price: €145.00/piece net - 1 set of Morse taper sockets MK 1, MK 2 + MK 3, price: €245.00/piece - New cup grinding wheel Ø 80 mm, price: €40.00/piece net - 1 brand new knurled nut for clamping collets with a saw thread S 20 x 2, price: €99.00 + €12.80 shipping net All of the above prices are net prices plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Gbsdpfectyh Ujx Al Ueu

Condition: good (used), functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, For sale is a conventional milling machine of the brand Deckel and type FP1 The small size of the machine makes it ideal for fast work with a small footprint The machine is fully functional Technical data: x-path 300 mm y-path 160 mm z-path 340 mm Tool holder SK40 Speed 40-2000 rpm Conventional control Table size: 600 x 210 mm Total power requirement 2 kW Gsdeugv Hvspfx Al Ujbu Machine weight approx. 0.73 t Space requirement approx. 1200x1100x1600 mm Loading and shipping throughout Europe can be organized on request. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), DECKEL universal table - small - , used Gbedpfx Alezucr Ne Uou Clamping surface 800 x 240 mm Weight estimated approx. 0.1 t

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Gbedpfx Aozq Hk Usl Uju Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 1986, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Gbedjz Rnp Repfx Al Uou Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: ready for operation (used), Deckel Maho tool holder for Deckel Maho FP4-60 milling machine, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Gbjdpey Np Ngefx Al Ueu

Condition: ready for operation (used), Deckel Maho Lasersoft 3D control panel, used, in good condition, 100% operational, scope of delivery as shown in the photos. Gbsdpfx Alox Eq E Is Ueu