Used Decoiler Straightener for sale (871)

Condition: used, Year of construction: 1987, Ref. No.: Lg 23112 Compact Decoiler-Straightener Combination, KEMMERICH V1000 - RM 6020 Used, in good condition Year of manufacture: 1987 – Machine No. 6638-11 Technical Data Passage width: max. 200 mm Material thickness: 0.5 to 3.0 mm Max. material cross-section: approx. 400 sq mm Number of straightening rollers: 7 Straightening roller diameter: 60 mm Straightening roller adjustment: individual via spindles Number of feed rollers: 2 Feed roller diameter: 60 mm Feed roller opening: manual Number of exit rollers: 2 Exit roller diameter: 60 mm Exit roller opening/pressure: manual Coil weight: max. 1,000 kg Expansion range: 380 to 520 mm Max. coil outer diameter: approx. 1,200 mm Iodjxpm Rxopfx Afkjtn Strip speed: approx. max. 20 m/min Connected load: approx. 3 kW Drive: steplessly adjustable via frequency converter. Loop control: analog, via feeler arm and potentiometer.

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel Itedpfx Afsq A Tw Rekjn • Siemens S7-200 control system

Year of construction: 2021, condition: used, DECOILER MAX COIL WEIGHT 1000kgr MAX COIL WIDTH 400mm Iedjgf Aaqjpfx Afketn MIN INNER COIL DIAMETER 370mm MAX OUTER COIL DIAMETER 550mm POWER 1,1kw LIKE NEW UNUSED 4 PIECES IN STOCK

Condition: used, Coil weight: 2 x 2 ton Itodouqdq Ejpfx Afkon Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton Standard configuration braked reel, not poweredOperating instructions not available

Condition: excellent (used), Year of construction: 1978, loading capacity: max. 700 Kg. disc diameter: 1.000 mm coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm coil width: max. 120 mm Itedpfx Aji Hi Swjfken

Condition: used, Year of construction: 1991, functionality: fully functional, Ref. No.: Lg 35425 Strip Straightening Machine Dreher 1676 BV Used, in good condition Year of manufacture: 1991 Technical Data Passage width: max. 300 mm Material thickness: 0.8 to 4.0 mm Max. material cross-section: approx. 800 mm² Number of feed rollers: 2 Iedpfxjxn Tqpo Afkstn Feed roller diameter: 80 mm Feed roller release: pneumatic Number of straightening rollers: 7 Straightening roller diameter: 80 mm Adjustment of the upper straightening rollers: individually by hand Number of exit rollers: 2 Exit roller diameter: 80 mm Exit roller release: manual Strip speed: approx. 0 to 30 m/min Strip edge guide vertically at the inlet, centrally adjustable. Roller basket at the outlet for strip guidance. Working direction: from right to left. Speed steplessly adjustable via variable speed motor (manual). Loop control via spring switch (start-stop).

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 55161, Used sheet metal strip feeder Manufacturer: KOHLER Type: TRE24. 180/21-2000. 2H-BF1,6-HK180 Year of manufacture: 2000 Isdpfx Afjww Nu Sjkotn Serial number: 55161 With enclosure

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 750 kg, Black Garlic Fermentation Machine Model HY-100 Input Capacity 100 kg/batch Output Capacity Approximately 50 kg/batch Machine Dimensions 1530 * 1450 * 2250 mm (L * W * H) Packing Dimensions 1700 * 1550 * 2070 mm Net Weight 600 kg Gross Weight 750 kg Power 4 kW Voltage & Electrical Phase Customizable Process Cycle 20 days Fermentation Support 1 pc Fermentation Tray 20 pcs Working Hours 24 hours Itedpfxsxptyte Afksn Control System PLC Automatic Control Control Interface Scalable Temperature Fluctuation ±1 ℃ Humidity Fluctuation ±0.5 ℃ Insulation layer material mineral wool, thickness 100 mm Material Both inner and outer walls are made of 304 stainless steel

Condition: new, Year of construction: 2025, -TFON Leveltech® XS-3520 Leveling Machine -The TFON Leveltech® XS-3520 is a compact and efficient leveling solution designed for thin materials and smaller widths. Equipped with advanced electromechanical controls and user-friendly touchscreen operation, it delivers precision leveling with reliable overload protection for enhanced safety.. -Key Specifications: Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width: 200 mm Minimum Material Length: 70 mm Flattening Gap Adjustment: Electromechanical / PLC Controlled Overload Protection: Standard Control Interface: Touchscreen HMI Iodpsityvfefx Afkstn Machine Weight: 2,000 kg Machine Dimensions(L × W × H): 2,225 × 1,595 × 1,850 mm

Condition: used, Year of construction: 2001, machine/vehicle number: 07011175, Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Itsdpfxsuqdgao Afkon Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton

Condition: excellent (used), Year of construction: 1991, laoding capacity: max. 700 Kg. decoiler diameter: 1.000 mm coil outside diameter: max. 1.400 kg. coil inside diameter: 260 - 710 mm Isdjuugi Ejpfx Afkjtn strip metal width: max. 120 mm

Condition: used, functionality: fully functional, Year of construction: 1992, Ref. No.: Lg 35325 Single-sided decoiler PBK E 1200 Used, in good condition Year of manufacture: 1992 Itjdpfoxn Tprox Afksn Technical data Load capacity approx.: max. 1,200 kg Strip width: max. 300 mm Expansion range: approx. 360 to 420 mm Outer coil diameter: approx. max. 1,500 mm Without drive, with pneumatic brake. Expansion of the supporting segments is manual via hand crank over joints. Number of supporting segments: 4 Coil side guide via heavy-duty limiting arms, can be clamped using quick-release fasteners. Uncoiler stand in robust box-type design as a welded structure.

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Ijdpfx Aowvv Rqofkstn Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: ready for operation (used), Decoiler, Sheet Decoiler, used machine Overall dimensions: 750 × 550 × 1260 mm Electrical data: 400 V Itodpoxfkypefx Afksn Opening: 190 – 420 mm

Condition: new, Year of construction: 2025, -Tfon Leveltech® S-3513 Leveling Machine -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results. -Key Specifications: Material Thickness: 0 – 0.3 mm -Maximum Material Width: 1.300 mm Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Total Weight: 5.000 kg. Itedpfx Afekyrzlsksn

Condition: used, Year of construction: 2003, machine/vehicle number: 1964, Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg Ijdpeuqc Ivjfx Afketn

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Coil weight: 150kg Iedpeh T Ducefx Afkstn Strip witdh: max. 100mm Outer diameter: max. 1.200mm Inner diameter: 320 ... 520mm Performance • decoiler fixed on moveable frame • Disc on back side and ring on front side for lateral coil keeping • manual adjustable brake

Condition: used, Year of construction: 1998, machine/vehicle number: 000373, Comm. no.: Lg 34723 Itjdpenbdyaofx Afken Double decoiler LORENZ HH 2000.2 Used, in good condition year of construction 1998 - machine no. 000373 with - hydraulic spreading and automatic retensioning - belt center adjustment manually via spindle - counterholder with quick clamping - circular protection ring - easily exchangeable clamping cylinder (service-friendly) - manual swiveling - direction of rotation changeover (top-bottom unwinding) load capacity max. 2.000 kg/side strip width max. 300 mm Coil inner diameter approx. 360 to 420 Coil inner diameter approx. 460 to 520 mm Coil outer diameter max. 1,800 mm with drive via three-phase geared motor and pneu. brake. drive power approx. 2.2 KW/side Unwinding speed approx. max. 40 m/min. Coil limitation via fixed limiting ring at the rear and adjustable counterholder (with quick clamping) at the front. Coiler stand with base frame with lateral shifting for coil center positioning. Currently without electric control. Can be re-engineered and offered on request.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, product height (max.): 3 mm, straightening roller diameter: 30 mm, working width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Iodpjxiyx Nefx Afkstn

Condition: new, Year of construction: 2025, -Tfon Leveltech® TF M-5516 Leveling Machine Engineered for precision leveling, the TF M-5516 efficiently handles material thicknesses from 1 to 15 mm with advanced control features for optimal performance and ease of use. -Key Specifications -Material Thickness: 1 – 15 mm -Maximum Material Width: 1,600 mm Isdpfx Afokyrqfsketn Minimum Material Length: 110 mm. Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Servo Hydraulic / PC Controlled Overload Protection: Standard Control Screen: Touchscreen Machine Size (L × W × H): 3,500 × 2,905 × 1,950 mm Total Weight: 19.000 kg.

Condition: used, Year of construction: 1981, machine/vehicle number: 11798-214, Coil weight: 1 ton Material width: 150 mm Ijdpfx Afou Uc Tljketn Coil exterior diameter: 1200 mm Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake Ijdpfx Astgvgpofkstn 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series Models: S-3560, S-3511, S-3513, S-3516 -Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation.. -Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width -S-3560: 600 mm -S-3511: 1.100 mm S-3513: 1,300 mm S-3516: (width not specified) Minimum Material Length: 70 mm. Flattening Gap Adjustment: Electromechanical / PLC Controlled. Overload Protection: Standard. Control Screen: Touchscreen Machine Weight: S-3560: 5.000 kg S-3511: 10.000 kg. Itsdohwb Utspfx Afken S-3513: 14.000 kg. Machine Dimensions (L × W × H): S-3560: 1,985 × 1,585 × 1,820 mm. S-3511: 2,485 × 1,585 × 1,820 mm. S-3513: 2,695 × 1,585 × 1,820 mm

Condition: used, Year of construction: 1985, Decoiler Itjdpfx Afexdl Niekon Decoiler with arm: 1,5 ton Material width: 350 mm Coil exterior diameter: 1.200 mm Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Cross section: 1.200 mm Feeding speed: 20 m / min Required power: 18 kW Standard configuration - Pneumatic clamp roller- Manual disc brake

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards. Key Specifications: -Material Thickness: 1 mm – 30 mm -Maximum Material Width: 1,600 mm -Minimum Material Length: 145 mm -Quick Change System for Straightening Rollers: Standard -Flattening Gap Adjustment: Servo Hydraulic with PLC Control. Iedpfx Askyrphsfkotn -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm. -Total Weight: 40.000 kg