Used Decoiler for sale (258)

Condition: used, Year of construction: 2000, Capacity: 250 ton V – Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 64 - 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg Standard configuration Maximum material thickness: 10 mm Extended machine accessories including roller feedincluding waste-cutting shears Automation Straightening unit, model RLM 25-SMaterial width 50–250 mmMaterial thickness 6–10 mmNumber of straightening rollers: 5Diameter of straightening rollers: 88 mm Decoiler USM 2000 AS Coil weight: 2 tonnesCoil outer diameter: approx. 1,500 mmCoil inner diameter: approx. 508 mmMaterial width: 50–250 mm Pgodpozwfqaofx Angor

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos Pedpein Rn Aofx Angjgr -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Pjdpfxozil S Is Angsgr Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm Pgjdpfx Anowx R Rdogor no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: used, Year of construction: 2023, gebraucht 2023 9676 prompt, Zwischenverkauf v Deutschland 13700 € 1 1250 mm 1.25 mm 1,25 mm bei 1 Messerpaar; 0.37 kW 36 m/min 70 mm 1900 mm 1600 mm 1000 mm 350 kg demo machine / mint condition - fixprice 3 pairs of blades Pgjdpfx Anszvhgzeger Length measuring by wheel Digital preselection of one position Brake motor Rubber feeding rolls Manual crosscutting equipment in front and behind blade shaft with 1 cutting slide which alternaingly can be used on front and backside User manual in GERMAN OPTIONS: Additional pair of blades Decoiler

Condition: used, Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Pedpfevk D Alox Angjgr Mechanical decoiler max. 1000kg Coil inner diameter 400/508mm Straightening machine with 9 straightening rollers and 2 feed rollers and film unwinder The offer is aimed exclusively at traders within the meaning of §14 BGB no sale to private customers!

Condition: excellent (used), Year of construction: 1995, Press force: 320 kN Stroke frequency: 1,100/min Ram stroke: 3–50 mm Ram adjustment: 50 mm Drive power: 19 kW Table length: 760 mm Including soundproof cabin Including control cabinet Including BANDMOTION servo feed Including KEYENCE camera monitoring Pgjdsxcmkfepfx Anger Including decoiler The machine is in very good condition and immediately available

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 straightening roll diameter 50 mm speed 0 - 60 m/min power requirement 81,0 + kW weight of straightening machine 14,5 t Pgodpfx Anezrpu Eogsr coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll Pedpszrppcjfx Angegr - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls Pedpfxjzrprwj Angegr can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Max. coil weight: up to 5 tons Psdpjyn Shzjfx Angjgr Decoiler and recoiler with spacers Technical Data Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Decoiler, belt-driven power transmission Prices Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,600 h, functionality: fully functional, machine/vehicle number: 15243485, type of input current: three-phase, total width: 3,600 mm, total length: 39,700 mm, total height: 1,900 mm, input voltage: 380 V, overall weight: 19,700 kg, The line consists of double decoiler, pre-heating section, set of forming rollers, foaming machine, polymerization bench, cutting system with flying saw, belt conveyor, stacking bench with return and a control panel. The line is equipped with a COMBI system allowing quick profile type changeover. Podpfxjzwb D Ns Angogr The line produces two profiles: 1. H39mm, coil width 120mm, thickness 0.2-0.25mm 2. H45mm, coil width 136mm, thickness 0.2-0.25mm Technical Specifications: - maximum line speed - 36 m/min - maximum profile length - 6.5 m - maximum coil weight - 500 kg - the line power consumption approx. 36-40 kW IMPORTANT: the line currently produces only non-perforated profiles. However, perforated module can be integrated into the line for extra cost

Year of construction: 2022, condition: ready for operation (used), A GSW decoiler is available. Load capacity: 3000kg, strip width: 650mm, max. strip cross-section: 107.5mm/0.35mm, machine dimensions Y/Z: approx. 1150mm/2000mm. An on-site inspection is possible. Psdsyz Apwjpfx Angogr

Year of construction: 1979, condition: ready for operation (used), An eccentric press is offered. Press force: 7500kg, stroke: 1mm - 40mm, stroke rate: 60rpm - 240rpm, ram adjustment: 70mm. Precision roller feed, external control unit, digital process monitoring, sound insulation cabin, strip decoiler. Weight: approx. 1800kg, overall dimensions X/Y/Z: approx. 1400mm/1200mm/2100mm. Inspection possible by arrangement. Podjy Tar Topfx Angogr

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Psdpfji El Ucjx Angjgr

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine Pgsdpsuc Sw Asfx Angjr strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Feeder/Uncoiler/Straightener LARA DEMAE-10000/100/1400-D – Year 2018 Inspected and ready for production. Complete coil feeding system integrating uncoiling, straightening, and servo-driven feeding in a single compact unit. Engineered for continuous operation in cut-to-length, stamping, or deep-drawing lines, offering high precision and reliability. Robust equipment, ideal for processing carbon steel, stainless steel, and aluminum. Main Components Pgjdpfx Asy Edfzongjr • Powered hydraulic decoiler  Capable of handling heavy coils  Motorized coil loading car for rapid coil changeovers  Loop control via laser sensor  Protected loading area with safety barriers, ensuring excellent process visibility • Combined straightener-feeder  Head equipped with 11 straightening and feed rollers  AC servomotor with PLC control + touch HMI  Automatic threading and de-clamping functions to facilitate strip insertion • Integrated electrical and hydraulic systems  Independent electrical cabinet  Precise advancement control and synchronization with downstream equipment Key Technical Data  Maximum strip width: 1,400 mm  Sheet thickness: up to 3 mm (carbon steel / aluminum) up to 1.5 mm (stainless steel)  Power supply: 400 V / 50 Hz  Hydraulic pressure: up to 130 bar

Condition: used, Year of construction: 2025, COLOMBO R. Discontinuous sandwich panel production line Complete PUR sandwich panel production line for manufacturing panels up to 8 meters in length. Fully automated and equipped with a heated press, high-pressure foaming machine, and integrated roll forming system. A high-performance industrial solution for producing roof and wall sandwich panels in compliance with European standards. Production specifications - Production of sandwich panels up to 8 meters long. - Panel thickness: 40 - 100 mm. - Pre-painted steel thickness: 0.40–0.80 mm. - Manufacturing of roof and wall sandwich panels. - Capability to produce tile-effect sandwich panels. - Automatic cut-to-length system. - Automated machine settings. - Electrical components from leading brands: Siemens, Rexroth, Schneider Electric, Omron, and SMC. Line configuration - 4-platen heated press. - Maximum panel length: 8 meters. - Production of polyurethane (PUR) insulated sandwich panels. - ULTRAMIX 100 high-pressure foaming machine with 1:1 mixing ratio and self-cleaning mixing head. - Complete roll forming line for steel facings. - Two roll forming lines for manufacturing different panel profiles. - 7-ton hydraulic decoilers. - Automatic hydraulic cutting system. - PLC control system with touchscreen interface. Pedpfx Aszrhtmengogr - Automatic control of panel lengths and production quantities. - Fully automatic dosing of foam components. - CE-compliant installation with integrated safety systems. Included - Complete production line. - High-pressure foaming machine. - Heated press. - Roll forming equipment. - Outfeed tables. - Electrical control cabinet. - PLC control system. - Technical documentation included. Panel length: Up to 8 meters Panel thickness: 40 - 100 mm Pre-painted steel thickness: 0.40 – 0.80 mm Panel types: Roof and wall sandwich panels, capability to produce tile-effect sandwich panels Control system: PLC control with touchscreen interface and automatic settings Foaming machine: ULTRAMIX 100 high-pressure foaming machine (1:1 mixing ratio) Press type: 4-platen heated press

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel Psdpfszt Ni Esx Angsgr * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). Psdpfxsyw Rzao Angogr A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm output: 400/min. complete with ciller and Pede Syv Tjpfx Angsgr motorized decoiler

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Wire diameter range: 2,0 - 6,0 mm Wire feeding length: unlimited Pedpfx Ajy Ehpwengsgr complete with an motorized wire decoiler WAFIOS H 3 table diamtere: 1.600 mm loading capacity: 1.500 Kg.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* Pgjdpfx Anjy Ehrfegor complete with an motorized wire decoiler table diamtere: 1.500 mm loading capacity: 1.500 Kg.

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Pgodpfjzrhhqox Angor

Condition: good (used), Year of construction: 1996, Offer 25468 Sheet – Profiling Line for Shelf Panels Technical Data: - Shelf panel width approx. 250 mm - Material thickness 1.25 mm - Profiling unit with 16 roll forming stations - Hydraulic punching unit - Straightening unit, make DREHER - Motorized decoiler CAMU, load capacity approx. 1.5 t Pgjdpfx Ansxxvq Togor - Control panel - Space requirement / footprint: 14 x 1.5 m - Weight approx. 10 t