Used Demag 500 for sale (506)

Condition: not inspected (used), Bridge crane including girder, approximately 13 meters Kjdpjxu Utxofx Agzsnf

Condition: ready for operation (used), Gantry crane with new DEMAG hoist replaced in 2014 Kedpsn Hqt Esfx Agzjnf lifting capacity 18to Lifting height 10,75m span width 23m 220/380V 50Hz

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Kjdpfxjx Hg R Aj Agzjnf Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Year of construction: 1992, condition: good (used), Compressor system consisting of: Screw compressor Manufacturer: MANNESMANN DEMAG Type: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³/min 3,000 rpm 45 kW Digital display Screw compressor Knedpfx Aori I Rregzjf Manufacturer: MANNESMANN DEMAG Type: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³/min Pressure: 75 bar 3,000 rpm 45 kW Refrigeration compressed air dryer Manufacturer: MANNESMANN DEMAG Type: AD160AB Year of manufacture: 1993 Oil-water separator Type: ÖWAMAT 6 Compressed air receiver Manufacturer: LOHENNER Type: ZU47/21 Volume: 5,000 l Vertical design Year of manufacture: 1993 Overpressure: 11 bar 161225ä

Condition: good (used), good condition – the hook block cover is slightly damaged – 8t lifting gear according to factory, downgraded to 6.5t – for further information see type plate Ksdpjx Hhgrsfx Agzsnf

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Ksdpoxz Ah Refx Agzenf Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Kedpfx Agjwk T Uiezsnf Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2005, operating hours: 67,553 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 355 mm, displacement volume: 106 cm³, injection weight: 96 g, mold height (min.): 210 mm, opening stroke: 400 mm, plate width: 480 mm, plate height: 480 mm, installation height: 400 mm, heating capacity: 8.3 kW (11.28 HP), power: 11 kW (14.96 HP), Machine DEMAG Ergotech Extra 50-200 with SEPRO Axess S3 handling robot. Ready for production and available for inspection at any time. 2 pneumatic cascades, 1 AS core pull, 6 integrated hot runner zones. Kodpfx Agox Ex R Ejzjnf

Condition: good (used), functionality: fully functional, Year of construction: 2008, type of input current: three-phase, For sale is a DEMAG mobile crane, year of manufacture 2008. Technical specifications: Ksdpfx Asxmg Dyogzonf - Outreach: 2 meters - Lifting capacity: 125 kg The crane is fully functional and can be inspected on site.

Condition: used, Year of construction: 2002, Additional title: Slewing crane Maximum load: 2000 kg Knodpjxykvmofx Agzof Reach: 4 m Height: 4,61 m

Condition: defective spare-parts repository (used), Year of construction: 2003, Demag Ergotech - system 250/280-80 Clamping force 25 t Screw diameter 25 mm Year of manufacture 2003 Pump defective (minor issues) Sprue picker Knsdpfxex Em Hne Agzef

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / Electric Machine Year of manufacture: 2009 Knedpfxsxz Agts Agzjf Injection Unit: Screw diameter: 35 mm Shot weight: 128 g Injection pressure: 1466 bar Dosage volume: 144 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touchscreen Additional Equipment: Electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 4 Control with hot runner modules Hardened injection unit - bimetallic Central lubrication The screw diameter can be changed Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical testing at our company in Łódź. Price: On request

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, General information Field of application: Construction Serial number: 82609 Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Ksdswk Aw Hepfx Agzjnf Lifting capacity: 220.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Year of construction: 2012, clamping force: 2,800 kN, Equipment: documentation/manual, Demag Systec 280/630-600 (2012) Clamping force: 280 t Screw diameter: 45 mm Shot weight: 294 g Distance between tie bars V: 630 mm Distance between tie bars H: 630 mm Shot volume: 323 cm3 Ksdpfxjxykw Rs Agzonf Type: Horizontal Drive: Hydraulic

Condition: used, functionality: fully functional, DEMAG DH525 H12, 5 t. Overhaul (technical and visual) possible by us. Without electrics KBH 140 B 2/12 Additional hoisting units, motors KBH / KBF / KBV / K-Motor, spare parts, rope guides, running wheels, brakes, and much more available on request. Kjdox Ap R Uopfx Agzenf Please contact us by phone or email for questions or quote requests.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, column diameter: 90 mm, displacement volume: 442 cm³, injection pressure: 1,646 bar, injection weight: 400 g, mold height (min.): 340 mm, ejector force: 16,000 N, ejector stroke: 100 mm, opening stroke: 790 mm, total length: 5,552 mm, total width: 1,656 mm, total height: 2,118 mm, overall weight: 8,200 kg, pressure: 1,646 bar, pump power: 30,000 W, For sale: fully operational machine, currently in continuous production. Without Campetella robot. Ksdpfxex Dkvhs Agzsnf

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80, clamping force 25 tons, screw diameter 25 mm, year of manufacture 2003, sprue picker included. Ksdpex Em E Rofx Agzonf

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Knjdpfx Asxz Agysgzsf Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, DEMAG frequency inverter with resistor unit - 2 pieces Knjdpfeu Uvi Tsx Agzjf 1 type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistor unit ( new ). 2 Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 with resistor unit ( used ).

Condition: excellent (used), Year of construction: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1,877 bar Dose volume: 1,212 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1,040x1,060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Knsdjxzzyxepfx Agzef Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runner x 5 Injection unit hardened - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Built-in printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 robot Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, Y-telescopic, Z, B, C Axis travels: X-1,200, Y-2,400, Z-4,000 Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: new, DEMAG brake hood / brake cover ( new / used ) In different sizes !!! 23 pieces - new. 15 pieces used. Kjdpfx Aju Uh Rpsgzenf

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Knodpfxexzzylj Agzef Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: new, DEMAG hook block / crane hook / hook ( new ) Demag - 10 ton - 2 pieces are available. Knodpfxju T Slne Agzsf Demag - 20 / 25 ton - 2 pieces are available.

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m Knedpfx Ajxzzyfjgzsf All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: good (used), DEMAG gearbox / crane gearbox. Type: FG 08 - 2 pieces Type: AF 12 - 4 pieces Knjdpju T Sarjfx Agzjf