Used Diaphragm Accumulators for sale (613)

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Lredpsynzg Hsfx Afust Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: used, axle configuration: 2 axles, first registration: 03/2023, Equipment: ABS, Equipment: Sliding trailer 20 S * Dimensions and weights * External overall length approx. 7,055 mm * Overall width approx. 2,500 mm * Laden height approx. 1,150 mm * Roller track length approx. 6,890 mm * Wheelbase 5,240 mm * Unladen weight approx. 3,460 kg * Technically permissible total weight approx. 20,000 kg * Permissible total weight approx. 18,000 kg * Payload approx. 14,540 kg * Designed for containers with a length of 5,000 to 7,000 mm according to DIN 30722. * (Technical changes reserved.) * Chassis: * Chassis construction made of welded I-beams in QSTE steel * 4 container locking devices and upper sliding frame locking device, pneumatically operated * Side protection device according to RL 89/297/EWG, closed (position 2) * Bogie: * Bogie 980 FM including ball bearing turntable 90/1100/22 (low maintenance) * Drawbar: * Drawbar 2600/980/100/30, inclined drawbar pin * with height adjustment (coil spring with locking mechanism) * Drawbar with DIN drawbar pin, internal diameter D=40mm, external diameter D=110, thickness 30mm * Axles: * 2 x 10 t axles for 19.5 disc brakes, ET 138, manufacturer at manufacturer's choice. * Disc brake diameter approx. 370mm, * Wheel fastening by center centering according to DIN 74 361 Part 3. * Braking system: * Air brake system according to EU directive with interlock-proof * Duomatik coupling head * Conventional air suspension system, * EBS Type 4S/3M, electronic braking system with ROLL Stability, * Double-diaphragm spring accumulator cylinder on the rear axle, * Release valve for separate release of the spring accumulator brake. * Lighting system: * Lighting system 24 Volt, full LED according to RL 76/756/EWG with multi-chamber lamp * (Hella) and license plate lights integrated into the light panel * 1 x 15-pole plug connection * 6 LED side marker reflector lights * 2 LED outline lights, white, at the front * 2 LED position lights at the rear, separately mounted * 1 reversing light (position 3) * Tires: * Regional traffic tires, tire manufacturer at manufacturer's choice * 8-ply 265/70R19.5 (7.5x19.5) * Steel wheels ET 138, wheel nuts unpainted * Underrun protection: * TÜV-tested underrun protection made of aluminum. * Two vertical delta-shaped impact protection profiles serve to protect the rear during * loading and unloading. * Accessories: * 4 plastic fenders, half-shells at the front and rear, single-wheel fenders * 4 anti-spray mud flaps * 1 lockable plastic toolbox * 1 chock with holder * 1 license plate holder * 1 A-sign for the transport of waste materials * 1 net box (position 4) Ljdpsy Trycjfx Afuert * 2 container guides * 3 small EBB stickers (position 5) * Painting: * Chassis color: MB 7350 Novagrau * Upper sliding frame: MB 7350 Novagrau * Wheel hub color: black KTL * Rim color: RAL 9006 silver * Contouring marking at the rear: red * Contouring marking on the side: white * SSE: RAL 7001 Silbergrau (position 6) * Rear panel/light panels: RAL 7001 Silbergrau (position 6) * Underrun protection: aluminum-anodized (silver) * Locking hooks, container guides: yellow * Documentation: * Included in the scope of delivery: * Commissioning and brake test report * Operating instructions * Maintenance instructions from axle manufacturer * Spare wheel holder removed All information without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: used, axle configuration: 2 axles, first registration: 02/2023, next inspection (TÜV): 03/2027, Year of construction: 2023, Load securing: Body certified to EN 12642 XL. Drinks certificate. Daimler 9.5 certificate. 2 identification plates at the rear, 565x200, ECE-R70, vertically on the rear panel. Vehicle complies with EC type approval with Certificate of Conformity (CoC). 1 folding GGVS sign. Front crossmember height 125mm, rear 400+28mm, Smart Generation. Chassis: Standard version. "MODULOS" bolted chassis. E-bike holder, corbel version, screwed for 2 e-bikes, behind the unit. 10-year warranty against rust-through on galvanized parts (see warranty terms). Wheelbase 7700 mm. Axle distance 1310/1310 mm. Outer frame with Speed Curtain on both sides. Underrun protection. Kingpin: 2" according to SAE standard, interchangeable. 1 kingpin position 1690mm. Lateral impact protection in conjunction with a pallet box. Starting aid (liftable front axle), activated by "3x braking". Circular driving with the lifted 1st axle is not possible. Starting aid (liftable front axle), activated by "3x braking". Only permitted for use as a starting aid. Model SCS 24/L - 13.62 E B. Manufacturing date 01.02.2023. Body length 13620 MM. Body width 2480 MM. Front wall height 2400 MM. Body height at the front 2680 MM. Body height 2680 MM. Lateral front passage height 2600 MM. Lateral rear passage height 2600 MM. Total height at the front, unladen 4002 MM. Total height at the rear, unladen 3907 MM. Loading height at the rear, unladen 1197 MM. Tire size 385/65R22.5. Total weight (permissible/technical) 36000/39000 KG. Payload (permissible/technical) 28875/31875 KG. Unit weight (permissible/technical) 24000/27000 KG. Saddle load (permissible/technical) 12000/15000 KG. Tare weight, complete 7125 KG. Fifth wheel height, unladen 1155 MM. Ride height 270 MM. Wheelbase 7700 MM. Rear door height 2648 MM. Rear door width 2480 MM. Brake disc diameter approx. 430mm. ROTOS SCB running gear system (disc brake). Axle SCB 9 t, SP2040, FM1300, ET 120, disc brake 430 mm. Wheel fastening by center centering according to DIN 74 361 part 3. SCB air suspension type: MRH-KM30. Two-circuit compressed air braking system with standard couplings. Steel air tank. EBS 2S/2M with stability program. EBS power supply via ISO 7638 + CAN. Double diaphragm spring accumulator cylinder. Lifting and lowering device with AUTO-RESET function. 2 chock blocks with holder. Support jack, manufacturer "JOST", semi-circular foot with plate, single-sided operation, low maintenance. 1 LED lighting system 24V with multi-chamber light and dynamic turn signal. 2 sockets, 7-pin, 1x DIN ISO3731 / 1x DIN ISO1185 and 1 socket ISO12098. Continuous lamp carrier, color white, with "SCHMITZ" embossing. LED side marker lights coupled with turn signals. 1 pair of LED side marker lights. Without rear warning system / ramp approach aid. Tire brand: SCB ""SELECTION"" Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone. Regional transport tires (M+S). 6 tires 385/65R22.5 (11.75x22.5). Steel wheels, ET 120. Protective caps for wheel nuts. Anti-spray mud flaps with Schmitz logo. Lashing eyes: 30 pairs in the outer frame, 2 tons tensile force per eye, according to EN 12640. Ram protection for running rail, Speed Curtain. Pallet stop, straight on both sides of the outer frame, 19mm high, internal dimension 2460mm. Rubber ram protection at the rear. 2 rubber bumper buffers, vertically on the lamp panel. Pallet box for 24 Euro/16 ISO pallets. Ground clearance of the pallet box 286 MM. Holder for light and brake connection at the front of the headboar Ljdpjzg R Hrsfx Afujrt

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: mse mail inserter, Bluecrest epic mail inserter / folder processing speeds of 22,000 mailpieces per hour hi input accumulator / folder Lredpfx Afjzkli Neujt 4 station chassis current windows barcode 2D reading cameras for mail matching

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 358143, Hydra-Cell G10XKSGSFEMB diaphragm high pressure pump with 4 kW motor, build in inverter, manual control unit (on/off and speed), external cooling and 34,5-69 bar over pressure valve. Possible to switch to different control modes and ramps through DIP switches. Model: G10 X: Standard high-pressure performance K: Kel-Cell version S: 316L pump head G: Vition/FKM Diaphragm and O-ring S: 316L valve seat F: 316L valves E: Elgiloy valve springs M: Kynar/PVDF valve spring retainer B: 10W30 motor oil 30,6 liter/min (1,8 m3/h) at 1450 RPM. 69 bar (1000 psi) at 1450 RPM and 103 bar (1500 psi) at 790 RPM. Max inter pressure of 17 bar and 121 degree celcius maximum fluid temperature. Able to handle solid particles up to 500 microns (0,5 mm) Lodpfezv Ibfsx Afujrt It has a crack in the back left mounting foot (see picture)

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 12J10E, Used unit of VerderAir VA50 Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations. The specific arrangement code you provided (VA50 SS SS TF TF) designates a heavy-duty metallic pump constructed with a stainless steel fluid section, stainless steel seats, and PTFE (Teflon) balls and diaphragms. SKU 810.2392, serial number: 12J10E, year of manufacture: 2010, maximum air pressure: 8.5 bar; MFR: 568 L/min; as good as new condition This Air Operated Diaphragm Pump is suitable for the transfer of chemicals, solvents, flammable liquids, and fluids with abrasive particles. Constructed of Stainless Steel and PTFE (Teflon) Energy efficient Easy to install, operate and maintain Anti-ice muffler Free of air lubrication Non-stalling air valve Can run dry without damage Dry self-priming Key Technical Specifications Knowing these parameters can help you accurately list your pump for sale or verify if it meets your facility's operational needs: Maximum Flow Rate: 568 L/min (approx. 150 GPM) Maximum Discharge Pressure: 8.4 bar (approx. 122 PSI) Liquid Connections: 2" BSP/NPT Air Inlet Connection: 1/2" NPT Wetted Materials: Lredpfezz Twcex Afuot Stainless Steel (SS) housing with PTFE (TF) diaphragms/balls, making it highly resistant to aggressive chemicals, solvents, and abrasive media. Maximum Suction Lift: 2.5 m (dry) / 5.5 m (wet) Certification: Standard metallic configurations usually come with ATEX certification for hazardous environments Price: 6.160 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. Wir sprechen Deutsch/Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: A0008858, Used Verderer VA25S-A01AS2SSSSPTPT Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations., serial number: A0008858; year of manufacture: 2012. Very good condition The specific arrangement code you provided (VA25S-A01AS2SSSSPTPT) designates a heavy-duty metallic pump constructed with a Stainless Steel fluid section, Stainless Steel seats, and PTFE (Teflon) balls and diaphragms, and defines a heavy-duty, highly corrosion-resistant configuration of the Verderair VA 25 Air-Operated Double Diaphragm (AODD) pump. This specific model is typically engineered to handle aggressive chemicals, strong acids, solvents, and high-temperature fluids The operating limits and physical profile for the Verderair VA 25 SS SS TF TF include the following parameters: Connection Size (Liquid):1" BSP or NPT (Threaded) Connection Size (Air): 1/2" NPT Maximum Flow Rate: 189 liters per minute (50 GPM) Maximum Discharge Pressure: 8.6 bar (125 PSI) Maximum Fluid Temperature: 104°C (220°F) Limited by the PTFE components Maximum Suction Lift (Dry): 3.0 to 4.9 meters Maximum Suction Lift (Wet): 6.0 to 8.8 meters Maximum Particle Size: 3.2 mm (Solids handling capacity) Pump Weight: approx. 16.5 to 18.8 kg (heavy due to full-metal construction) Certifications: ATEX certified (safe for explosive atmospheres) Dimensions: L 470 mm x W 250 mm x H 360 mm SS (Fluid Section): 316 Stainless Steel housing and manifolds. Provides high chemical resistance and mechanical durability; SS (Air Section / Check Valve Seats): Depending on the generation, this represents a heavy-duty Stainless Steel center air section or Stainless Steel valve seats. It avoids the corrosion or cracking risks associated with aluminum or plastic components in harsh environmental conditions; TF (Check Valve Balls): PTFE (Teflon) check balls. Ensures a tight seal and broad chemical compatibility during cycling; TF (Diaphragms): PTFE (Teflon) diaphragms (typically backed by an EPDM layer for flexibility). PTFE offers the highest level of universal resistance to corrosive fluids; Price 2.290 Euro + VAT, negotiable, FCA: Oradea/Romania Lsdpfx Asz Abcpofuort Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls Lredpfx Afoz Ef N Ajujt - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: used, Rotary accumulation table Ø 1,000 mm with drive head and adjustable-speed gear motor. The motor drives both the rotary table and the conveyor chain. Direction: CW (clockwise). Lsdpfx Afozzpggeuort

Condition: used, Year of construction: 2014, - Manufacturer: Cefa/Sorbini - Model: SMARTCOATER MF-EVO Ledpfx Ajz Ehq Nsfujrt - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 880 mm - 940 mm - Workpiece height: 3 - 80 mm - Operating side: right - Coating roller: rubber hardness ~ 50 - 60 Shore - Coating quantity: ~ 4-50g/m2 - Coating roller diameter: 250 mm - Metering roller diameter: 173 mm - Metering roller with switchable reverse operation - Double diaphragm pump: 1 piece - Transport system with conveyor belt - Compressed air connection: 6 bar - Machine is mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Control cabinet is mounted on the rear of the machine - Voltage, frequency: 400 / 50 - Voltage fluctuations max. +/- 5 %

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 05/22, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 45 mm, workpiece height (max.): 1,200 mm, number of slots in tool magazine: 12, actuation type: electric, Equipment: CE marking, documentation/manual, CNC MACHINING CENTER TOP PROXIMA – 6 SIDES, AUTOMATIC LOADING, DOWEL INSERTION, AND RETURN For sale: CNC machining center TOP PROXIMA, year 2022, designed for the automatic machining of furniture components and panels. Machine in very good condition, well-maintained, and currently installed in a production facility. It allows for drilling, milling, and automatic dowel/hardware insertion operations, with the possibility of machining the part on up to 6 sides. It features two independent work units, one for the main side and one for the back side, reducing handling and intermediate operations. Automatic loading and buffer stock. The machine incorporates an automatic loader that acts as a production buffer. Parts can be identified using a barcode reader/scanner, associating each part with its machining program. Lrjdpfx Afeztkqdjust It can also be integrated into an automatic line, receiving parts directly from previous processes. Before machining, it incorporates an automatic system for checking and measuring part height. Main functions: Vertical and horizontal drilling. CNC milling. Machining of up to 6 sides. Front machining unit. Rear machining unit. Automatic tool change. Automatic dowel insertion. Dowel insertion on the X-axis. Automatic dowel feeding. The machine has various spindles, electro-spindles, and specific units for drilling, milling, and dowel insertion. Direct output or automatic return Once machined, the part can continue with direct output to the next process or automatically return to the beginning using the conveying system. The return system also incorporates a loader/accumulator, allowing for the storage of machined parts and functioning as an output buffer. The machine can operate independently or be integrated into an automated manufacturing line. Main data: Manufacturer: TOP Model: PROXIMA Year: 2022 Maximum part length: approx. 3,000 mm Processes: drilling, milling, and dowel insertion Machining: up to 6 sides Loading: automatic with storage/buffer Identification: barcode Part control: automatic height measurement Output: direct or automatic return Control: industrial CNC Safety: enclosed installation Condition: Machine in very good overall condition, well-maintained. Operating hours are not available on the control panel. Availability: Availability to be confirmed. The machine is currently installed, and its removal will depend on the implementation of the new production line. Disassembly and loading: Disassembly, loading, and transport are not included. These tasks must be carried out by an external, specialized company at the buyer's expense.

Year of construction: 2018, condition: used, machine/vehicle number: AT89, Used Tetra Pak helix accumulator 44 meters year 2018 The Used Tetra Pak helix accumulator 44 meters year 2018 efficiently accumulates and manages the production flow in aseptic packaging lines. Notably, Tetra Pak manufactured this model, identified as ACHX10-0400-44, in 2018 to handle brick-type carton containers. Lrjdpfx Afoyhbxpeujt Technical and Functional Features To begin with, the Used Tetra Pak helix accumulator 44 meters year 2018 accumulates containers using a helical system that extends 44 meters. Its primary function is to compensate for speed variations between upstream and downstream machines. As a result, it optimizes production flow and prevents plant downtime. Furthermore, the ACHX10-0400-44 model provides high temporary storage capacity and maintains a continuous container flow without compromising structural integrity. Additionally, the helical architecture optimizes available space and reduces footprint compared to other linear accumulation systems. Consequently, thanks to this configuration, the Used Tetra Pak helix accumulator 44 meters year 2018 ensures high operational efficiency with a reduced footprint, making it particularly suitable for lines with complex layouts. Materials and Compatibility Moreover, the accumulator handles brick-type carton containers, ensuring gentle treatment that prevents deformations or damage to the packaging. In addition, the structure uses corrosion-resistant and easily sanitizable materials, thereby complying with food industry regulations. Similarly, the conveyor belts and internal components minimize friction, ensuring smooth container movement. Integration with the Production Line Importantly, the Used Tetra Pak helix accumulator integrates easily into existing packaging lines. This is primarily due to its compatibility with Tetra Pak filling and sealing machines. In particular, the advanced electronic control system synchronizes with production, dynamically adjusting the accumulation and release speed of containers based on operational needs. Consequently, this mechanism optimizes production flow management and significantly reduces the risk of congestion or slowdowns in the line. Operational Advantages By using the Used Tetra Pak helix accumulator manufacturers can significantly improve production efficiency. Specifically, it reduces machine downtime and optimizes overall plant performance. Furthermore, the compact and modular structure simplifies installation and maintenance, thus lowering operational costs. On top of that, Tetra Pak’s high-quality construction ensures system reliability, reinforcing the robustness and durability of its equipment. Conclusion of this Tetra Pak Accumulator All things considered, the Used Tetra Pak helix accumulator provides an advanced solution for managing production flow in aseptic packaging lines. Thanks to its storage capacity, operational efficiency, and compatibility with Tetra Pak systems, this model serves as an ideal option for plants requiring high performance and reliability in handling brick-type carton containers. Ultimately, it represents a reliable and effective investment for streamlining production processes.

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Lodjy Exqlopfx Afuert Availability: immediately ex stock, inspection by appointment possible

Condition: like new (used), Year of construction: 2015, functionality: fully functional, The Wilden Saniflo™ Series pump line is specifically designed to meet the strict guidelines established for sanitary process applications. Saniflo™ pumps incorporate a straight flow-through design, large solids passage and efficiencies to insure process success. Saniflo™ pumps have a shear sensitive operation, Tri-clamp® style fittings and are offered in various surface finishes. The Saniflo™ pump line also offers pumps that are CIP (clean in place) and COP (clean out of place) for ease of use and maintenance. The pumps are now available with the Pro-Flo Shift air distribution systems! Lredpfouwqivex Afust For sale is the American-made Wilden high-performance diaphragm pump shown in the picture. Food industry (pharmaceutical industry) certified with 3' output and input clamp connector. It was only tested once, otherwise completely new. Air (pneumatic operation) acid and alkali resistant inner and completely stainless housing. It can also pump large particle sizes. Similar pump: wildenstore.psgdover.com/products/aodd-pumps/item-15-12676-wilde -n-3inch-stainless-steel-pro-flo-shift/ New price: about 17000 USD.

Condition: used, functionality: fully functional, machine/vehicle number: 155-10000, Year of construction: 2014, operating hours: 17,700 h, total length: 1,281 mm, total height: 1,962 mm, total width: 895 mm, type of input current: three-phase, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, STRATASYS FORTUS 450mc INDUSTRIAL 3D PRINTER Located in ALBACETE, SPAIN US-built · Documented ULTEM licences · Material included From a professional service bureau that has now closed. Tested and fully functional: powers up, initialises and reaches Idle with no faults. === VERIFIED JOB HISTORY === We hold the machine's complete job history export, which records the material used on every job. 2,807 jobs recorded between December 2015 and October 2024. 2,478 completed successfully (88.3%). ULTEM 9085 — 662 jobs, the most-used material here; last run October 2024 ASA, 5 colours — approx. 1,315 jobs Nylon 12 — 205 jobs ABS-M30 and ABS-M30i — 204 jobs Polycarbonate (PC) — 164 jobs ULTEM 1010 — 155 jobs, 27 on the CG grade ABS-ESD7 — 98 jobs ST-130 — 4 jobs A machine will not print a material without its licence activated, so the history is direct evidence of licence status. We send the full file to any buyer who asks. === MACHINE DATA === Model: Stratasys Fortus 450mc, 3D Production System P/N: 155-10000 Manufacturer: Stratasys, Eden Prairie, Minnesota, USA Build date: December 2014 Technology: FDM, dual extruder, heated build chamber Build envelope: 406 × 355 × 406 mm Supply: 120/208 V, 18.0 A, 3W+N+PE, 50/60 Hz Approvals: TÜV SÜD NRTL (US/C), CE, FCC Part 15 Tips fitted: T16 model + T16 support Accumulated hours: approx. 17,700 h Weight: 601 kg · Dimensions: 1,281 × 895 × 1,962 mm Heavy use between 2016 and 2022, light use since. === US-BUILT MACHINE — 208 V === The machine sits in Albacete, but it is not a European machine. The data plate reads Stratasys, Eden Prairie, Minnesota (photograph in this listing): it is US specification, 208 V. In Spain it has run through a step-down transformer, which is supplied with it. For a US buyer this counts twice: it plugs straight in with no electrical conversion, and US-origin goods returning to the United States can enter under HTS 9801.00.10, with no time limit on US-origin products. === MATERIAL INCLUDED — approx. €7,270 === ULTEM 9085 and ULTEM 1010 with their supports, ST-130, PC-FR flame retardant, ABS-ESD7, ABS-M30 and M30i, ASA in five colours, PC-ISO and soluble supports SR-30, SR-100 and SR-110. Itemised inventory, canister by canister with remaining volume measured, in the attached PDF. Part of the stock is Stratasys original and part is validated third-party material (iSQUARED, and Kimya PC-FR under the Stratasys Validated Materials programme). Lodpfxoy U H Hme Afuert === APPLICATIONS === Aerospace, defence, automotive, medical, industrial tooling and functional prototyping. ULTEM 9085 meets FST (flame, smoke, toxicity) requirements, which suits this machine to aircraft interior parts and certifiable tooling. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: under power, by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE1-STRATASYS Full data sheet in the attached documents. Every figure comes from the machine itself and can be verified on inspection.

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Ljdpfxexxz I Rj Afusrt Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and Lsdpfoxx Avpox Afusrt housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Year of construction: 2017, condition: excellent (used), functionality: fully functional, BRITAS ABMF 1050 FILTER For plastic recycling Brand: BritAs Recycling Solutions Model: ABMF 1050 Melt filter with belt Fully automatic filtration with an intermediate melt accumulator Lsdpfx Afez Ebmqjuort Filtration area: 1050 cm² Storage volume: 12 liters Production capacity: up to 1500 kg/h Year: 2017

Condition: good (used), Murzan PI-50 Double diaphragm pump Ledpszvlkqsfx Afusrt two in stock, ideal for handling suspended solids or shear sensitive products with no damage, easy to clean in place, applications juice, drinks, tomato paste, ketchup, yogurt, cottage cheese, eggs and more, 3 inch inlet and outlet, download PDF for full spec

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Lrsdpfx Afjxxy S Uouot Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle. Max. sheet length: 3,048 mm Max. sheet width: 1,524 mm Max. bending length: 2,500 mm Sheet thickness (steel ~410 MPa): 2.5 mm (90°) Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°) Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°) Max. bending angle: +135° / -135° Max. flange height: 165 mm Max. diagonal (rotatable sheet): 2,800 mm Min. sheet thickness: 0.5 mm Max. pack height (incl. pallet): 350 mm Max. load capacity: 5,000 kg Vertical stroke (loading table): 550 mm Rotation capability: 0°, 90°, 180°, 270° Automatic loading system with scissor lift table () Lrjdjyr Ackjpfx Afuot Conveyor–destacker (PCD3015) for automatic feeding Automatic panel bending center P4X-2516 Upper bending blade (LS1) Lower bending blade (LI) SiX CNC control system SOLE.P4 production management software OFFICE.P4 offline programming software ABA automatic blankholder (automatic length adjustment) CLA-A asymmetric auxiliary bending system UC1000-G13 gooseneck tool set Eroded clamp (for coated / special materials) PSE automatic cleaning & lubrication system SAP panel unloader / accumulator Spare parts kit (approx. €7,000 value)

Condition: used, Year of construction: 2017, Overview Complete dressing line for sparkling wine in 750 ml glass bottles, rated at 5,000 bottles/h. The line runs from bottle washing and drying through capsuling and labelling to tray forming, wrap-around packing and vertical packing, linked by approximately 50 m of bottle conveyors, tray conveyors and two accumulation tables. The labelling machine dates from 2017, the packaging end from 2002 and the bottle washer-dryer from 2005. The line is still in production and can be visited on request. Technical data - Year of manufacture: 2017 (labelling machine); remaining machines 2002 to 2005 - Output: 5,000 bottles/h - Product: sparkling wine - Bottles: glass, 750 ml - Bottle conveyors: approx. 50 m total length - Accumulation tables: 2 - Electrical cabinet with power supply and automation included Scope of Delivery - Bottle washer and dryer | CAMES | WDT-12 | 2005 Lrsdpfx Aez Dtymefuot - Capsuling machine | Robino & Galandrino | ZENITH Z 2/16 OTTICO | 2004 - Labelling machine | Sacmi | KUBE K60 | 2017 - Tray former | CERMEX | F28.40 | 2002 - Tray former | CERMEX | F28.40 | 2002 - Bottle deviator | CERMEX | 2002 - Vertical packer | CERMEX | AN90 | 2002 - Wrap-around packer | CERMEX | WB45.00 | 2002 - Laser coder | LINX | SL301 - Hot-melt unit | Nordson - Bottle conveyors | Bobard, Thierion, Anduze | approx. 50 m total length | 2017 - Tray conveyors - 2 accumulation tables - Electrical cabinet with power supply and automation Condition In production. Inspection on site by appointment. Availability Available from 29 January 2027. Location: France.

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. Lredpfx Afeyw Rzaeuot The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, Dematic conveyor system Accumulating roller 40000-500-440 RA2344 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 40000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Lodpevpu Hlsfx Afuort Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.3 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, overall weight: 6,500 kg, Clamping force: 150 t Year of manufacture: 2012 Injection shot weight: 359 g Injection unit 800 Screw diameter: 50 mm Specific injection pressure: 2000 bar Injection volume: 392 cm³ Injection shot weight: 359 g Screw L/D ratio: 24 Tool closing unit 1500 Clamping force: 150 t Tool plate dimensions: 695 x 695 mm Distance between columns: 520 x 520 mm Tool height: 250...650 mm Opening stroke: 400 mm Maximum plate distance: 650...1050 mm Weight: 6500 kg Dimensions (m) L x W x H: 5.25 x 1.67 x 2.20 m Control system: Selogica Equipment: Hydraulic core 12-zone hot runner system Lredsz D U Tnepfx Afuot Accumulator Frequency converter Hidrive drive 4 x pneumatic valve