Used Diaphragm Accumulators for sale (557)

Condition: excellent (used), Year of construction: 2019, Ref:11075 . 2022 Horizon Stitchliner Mark III Only 8.35 million books made! Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 12 station (1 x VAC 600Ha + 1 x VAC 600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 4 x Hohner 43/6S stitching heads to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Itodpfx Asywlifebveh Shingle delivery belt

Condition: used, Year of construction: 2003, Manufacturer: Pester pac automation Model: PEWO-pack 450 (with PEWO-therm tunnel) Year: 2003 Type: PE shrink wrapper/band wrapper with shrink tunnel Application: bottles, vials, vertical cartons, etc. Maximum speed: 60 products/min Passage width: 450 mm Configurable batch sizes Product guidance via upper belts and support rails Film type: PE Film width: 50–250 mm Film thickness: 0.025–0.10 mm Max. roll diameter 300 mm. Power supply: 3×400 V + N + PE, 50–60 Hz. Installed power: 10 kW (≈ 19.0 A) Air pressure: ≈ 5–10 bar The machine is sold with a dual-position feed conveyor: Feeding system for shrink wrapper Iodpsx R D Adefx Abvjth Accumulation conveyor feeder for manual packaging Various formats available Complete documentation

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available. Itsdpozcwitefx Abvsh

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty Container Handler Iodpfx Abozd H Uaoveth Load center: 1220 mm Mast type: Duplex Transmission: ZF WG211 automatic, 5/3 gears Condition: Operational and fully functional Technical condition: Very good Front tire size: 14.00-24 Front tire condition: 40 - 60% Rear tire size: 14.00-24 Rear tire condition: 40 - 60% ELME 584 sidespreader, 20ft-40ft, equipped with hooks and hydraulic clamp for double box lifting, +/-3° lateral tilt compensation, hydraulic sideshift +/- 600 mm Hydraulic, extendable spreader support on lifting frame, lift suspension via hydraulic accumulator, central lubrication system, automatic speed reduction depending on lift height, mast tilt, and if container(s) are clamped, engine preheater (230V), "one-touch" joystick function for automatic spreader adjustment (20'–40'), operator cab with air conditioning and sun blinds, air-suspended driver's seat with headrest and heating. Safety features: - Hydraulic spreader support on lift mast (for container checker safety) - Lifting suspension by hydraulic accumulator - Central greasing system - Engine preheater (230V) - Air conditioning - Drive speed limitation depending on lifting height and mast tilt angle - One-touch joystick function for automatic spreader adjustment (20–40ft) - Air-suspended, heated driver's seat - Sun blinds at roof and rear windows Condition: inspected, repaired, serviced, and cleaned; ready for work.

Condition: used, Year of construction: 2022, Flowserve PVML 35.15.15.30Y3 OH5 Pump Skid (Unused 2022) Itjdpfx Abjzc Rbvsvoh Overhung, vertical in line, close coupled pump 119.5 m3/h capacity 45kW ABB motor QHP bladder accumulator Tag P1404B See Lot Details pdf file in Attachments section below for further information. Photos may feature items not included and should not be relied on. The description table/text describe the item(s) for sale in this lot.

Condition: used, Krones Sensometic Glass Bottle Filling Line 300x 70/75 cL bpm 250x 1L bpm comprising - Krones pallet conveyor Itedjy Uyi Iepfx Abvoh - MSK 800 L‑R deshrouder - Krones L‑R depalletiser - Krones container conveyor - 2x Sauerstein air handling units - 2x Sutherland stainless steel pressure vessels - Krones Variojet L‑R rinser - Krones Isofill Sensometic L‑R block filler - Zalkin Promach 400l cap feeder - Zalkin FCT 1911 cap feeder - Gassner compact cap feeder - Krones Prontomodul L‑R Puma labeller - 4x Krones aggregate R‑L labeller stations - 2x Videojet 3330 laser labellers - 2x Garvens E40‑DMS scales - 2x Krones Variocart C‑40 L‑R case erectors - Hartness Dynac 6400 L‑R accumulator - Krones Multico pack conveyor - SFT Syncro Laner VWS R‑L divider - Krones Linapac II E30/h L‑R autopacker - Langenpac HCC R‑L cartoner - 2x Logopaks case printers - Krones Variocol H‑120 L‑R case sealer

Condition: used, Year of construction: 2008, operating hours: 34,590 h, machine/vehicle number: R81, Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Iodsx H Thuepfx Abvjth Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typ. 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilization utilities) Dimensions & Weight Approximate footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are indicative for this A3/Flex configuration and should be confirmed during inspection/FAT. Advanced Automation & Control Systems The A3/Flex platform features OEM PLC-based control with a touchscreen HMI for recipe handling, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and packaging quality at high speeds. Typical capabilities include: Recipe management for UHT milk, juices, and beverage variants Integrated process supervision and event/alarm logs I/O provisions for upstream/downstream line devices Recommended verification prior to start-up: PLC functions, valve actuation, pump performance, and seal integrity Production Line Integration Capabilities This aseptic carton filler integrates efficiently within a used bottling line or new beverage production layout: Upstream: packaging material feed and sterilization modules as per OEM design Downstream: conveyors to accumulation, straw/cap applicators, case packers, palletizers Utilities/process: interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Controls: standard digital/analog I/O and fieldbus-ready architecture depending on configuration Ideal for second hand industrial packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition & Maintenance History Condition: used, currently in storage Approximate machine hours: ≈ 30,000 Operational note: continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves, PLC functionality, elastomers and seals Routine inspection, replacement of wear parts, and validation of aseptic barriers are advised prior to restart. Operational Performance & Versatility Product scope: UHT milk, juice, and shelf-stable beverages

Condition: used, machine/vehicle number: LC639, Used KRONES - KHS 60,000CPH complete CSD lineTechnical Specifications & Performance DataThis used bottling line is a high-speed, complete canning solution for carbonated soft drinks, engineered with premium components from Krones, KHS, Ferrum, and other leading manufacturers. It delivers robust performance for industrial packaging and beverage production, combining dependable filling, seaming, pasteurization, and end-of-line automation for second hand operations seeking reliable throughput.Production speed: up to 60,000 cph (0.33L); recently running at 53,700 cph (0.5L)Container type: Aluminum cansFormats: Compatible with 0.33L and 0.5L can formatsMain equipment: KHS Innofill EMD 108S can filler; Ferrum F812 seamer; KHS Innopas tunnel pasteurizerInspection: Krones Checkmat and additional fill height inspectionPackaging: Kisters tray and shrink packing (overhauled 2015), Krones Robobox groupingEnd-of-line: Krones Modulpal palletizer, Strema pallet stretch wrapper, Logopak pallet labelingMaterial handling: Krones depalletizer, conveyors for cans, trays, and palletsAdvanced Automation & Control SystemsThe line integrates automated handling, filling, seaming, and inspection with coordinated conveying and accumulation to maintain stable high-speed operation. Automated depalletizing, grouping, palletizing, and shrink packaging reduce manual interventions and enhance consistency. Integrated inspection ensures precise fill height control, while the pasteurizer provides thermal stability for CSD. Quick-change capabilities are supported at key stations for format transitions between 0.33L and 0.5L cans.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line connects depalletizing through packaging and pallet handling with synchronized conveyors and buffering. The system accommodates multiple can sizes within the listed format range and integrates easily with upstream syrup room/premix and downstream warehouse logistics. The layout supports:Inline compatibility from empty can infeed to finished pallet dispatchFormat changes between 0.33L and 0.5L cansModular upgrades (inspection, drying, pallet labeling) already implementedSuitable for CSD beverage production and industrial packaging environmentsMachine Condition & Maintenance HistoryThis second hand canning line has been recently operating at 53,700 cph on 0.5L cans, demonstrating current production capability. Key modernization milestones include multiple 2018 Krones integrations across depalletizing, inspection, grouping, palletizing, and conveyors, a 2021 pallet stretch wrapper, and a 2022 pallet labeling unit. The Kisters tray and shrink packer underwent a complete overhaul in 2015, ensuring reliable packaging performance. Additional inspection capacity was added in 2023 for enhanced fill height quality control.Operational Performance & VersatilityOptimized for CSD, the line pairs the KHS Innofill EMD 108S can filler with a Ferrum F812 seamer for consistent, high-quality seaming and carb... Isdpfxezd Uf Ho Abveth

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Itsdjy N R N Uopfx Abvsh Miscellaneous: 1x Protective Enclosure 1x Handling system 1x Conveyor belt Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i Itjdpeytn Emjfx Abvsh TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: ready for operation (used), Leybold DIVAC 1.2L 200V~ diaphragm pump, serial number: 10031461, used, in good condition, 100% functional, scope of delivery as per photos. Iedpfxex Et Hbe Abveth

Condition: new, Hydac 3206365 CO - unit with G 80C4 3030923 motor SN: 13-Z180034, valve block, DB4E-CE safety valve, EDS 3446-2-0250-000 pressure switch, SBO200-1E1/112U-200AK pressure accumulator - 135 bar and liquid level control - with instructions and certificate, unused, 100% functional, scope of delivery as per photos Itjdpfx Absnkqz Rovsh

Condition: ready for operation (used), Abel EM-025Z0110-SG electromagnetic diaphragm pump SN:3001080-01 + Lenze GST06-2M VAL 090C12 spur gear + MHEMAXX090-12C1C three-phase motor, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itsdpfxji D Eygj Abvsh

Condition: ready for operation (used), Leybold DIVAC 1.2L 200V~ diaphragm pump, serial number: 9931707, used, in good condition, 100% functional, scope of delivery as per photos. Itedpfxjx Et Hhe Abvsh

Condition: ready for operation (used), Abel EM-025Z0110-SG electromagnetic diaphragm pump SN:3001302-01 + Lenze GST06-2M VAL 090CM4 spur gear + M55AP090M045E00CT three-phase motor, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iedpfei D Eykex Abveth

Condition: used, Year of construction: 2024, machine/vehicle number: M333, Used SIG Combibloc Filling Line – 26,500 BPHTechnical Specifications & Performance Data Itsdpezdipusfx Abvjh This SIG Filling Combibloc HMR - 7478 is engineered for high-efficiency aseptic filling in small-format packaging. Manufactured in 2024, it combines reliability with precise dosing for demanding beverage production environments. Designed within the SIG-2 Combibloc ecosystem, it integrates advanced sterilization and high-speed handling to support continuous industrial packaging operations on a used bottling line or second-hand installation.Line Volume Speed Equipment Description Year of Manufacture SIG-B HMR - 7478 65ML, 125ML, 200ML 26500 H2O2 Supply System, Concentration Check 2024 Filling Machine CFA 1224 & Accessories 2024 CONVERSION KIT FOR FILLER SPEED UP 2025Manufacturer: SIGModel: HMR - 7478Rated Speed: 26,500 BPHFill Volumes: 65 ml, 125 ml, 200 mlSterilization: H2O2 system (SIG COMBI 2024)System Compatibility: SIG-2 Combibloc 1224 filler platformUpgrades: Filler speed-up conversion kit (SIG-2 2025)Formats: Compatible with 0.065L, 0.125L, 0.2L package sizesAdvanced Automation & Control Systems The Combibloc leverages SIG engineering for controlled aseptic operation. The H2O2 sterilization module, updated in 2024, enables reliable decontamination of packaging pathways, while synchronized drives and servo-controlled movements maintain accuracy at high throughput. Operator interfaces, including a modern HMI touchscreen, are designed for intuitive changeovers and monitoring, supporting stable runtime in industrial packaging applications. Integrated safety logic and interlocked stainless steel guards protect operators and ensure hygienic operation during beverage production.Production Line Integration Capabilities Built for seamless line integration, the Combibloc interfaces with upstream and downstream equipment across SIG-2 Combibloc systems and compatible packaging machinery. It supports inline operation with conveyors, accumulation, and downstream secondary packaging. Quick format change principles accommodate small-size ranges from 65 ml to 200 ml, enabling fast product switches and efficient SKU management in complex used bottling line layouts.Machine Condition & Maintenance History Configured as a high-tier solution suitable for immediate integration, the unit is aligned with SIG-2 Combibloc filler standards and includes the available H2O2 system upgrade. A speed-up conversion kit (2025) is installed for enhanced capacity. This filling Combibloc presents as a professional-grade asset, available for sale after June 2026, for facilities seeking dependable performance without compromising aseptic protocols.Operational Performance & Versatility Optimized for small-format portion packs, the HMR - 7478 delivers precise volumetric control and stable filling quality at elevated speeds of 26,500 BPH. The aseptic design with 2024-standard H2O2 sterilization supports sensitive beverage categories where extended shelf life and strict hygiene are essen...

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,790 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 200 mm, spindle motor power: 1,500 W, total height: 1,600 mm, total width: 700 mm, overall weight: 1,700 kg, controller manufacturer: FANUC, controller model: Series 0i-TD, product length (max.): 1,460 mm, number of axes: 2, Horizontal turning machine manufactured in 2016. This Citizen MIYANO GN 3200 features a maximum machining diameter of 45 mm and a maximum machining length of 50 mm. It includes a spindle speed range of 8,000 rpm and a slide travel of 180 mm in the X-axis and 200 mm in the Z-axis. If you are looking to get high-quality turning capabilities, consider the Citizen MIYANO GN 3200 machine we have for sale. Contact us for further details. Itsdpfxjzb Iame Abvsh - Max. Machining Diameter (Collet Chuck): 40 mm (Pull type) / 35 mm (Fixed type)- Max. Machining Diameter (Air/Power/Diaphragm Chuck): 45 mm- Max. Machining Length: 50 mm- Max. Work Length with Loader: 40 mm- Spindle Nose: Special flat- Through Hole Diameter: 17 mm- Inner Diameter of Draw Tube: 11 mm- Spindle Drive Motor Power: 2.2 / 1.5 kW (15 Min. / Cont.)- Rapid Feed Rate: X-axis: 15 m/min / Z-axis: 15 m/min- Number of Tools: 5 (Standard square turning tool shank size: 10, 12, 16 mm / Drill shank diameter: 20 mm)- Power Supply Capacity: 7.2 kVA- Input Voltage: AC 200 V, 3-phase, 50/60 Hz- Coolant Tank Capacity: 90 L (Separate type)- Lubricating Tank Capacity: 1.5 L (Oil Viscosity VG32)- Spindle Cooling Device Capacity: 7 L (Oil Viscosity VG10)- Air Supply Pressure: 0.4 Mpa (4 kgf/cm²)- Spindle Center Height: 875 mm- Working Hours Count (as of 2026/05/21):- Control On Time: 8,765 Hours- Operating Time: 5,000 Hours- Cutting Time: 3,790 Hours- Parts Counter: 39,713- Total Parts: 759,451- Included Equipment:- High-speed gantry loader (Upper/lower feed rate: 154 m/min, Right/left feed rate: 130 m/min, Max workpiece size: 40x40mm, Max weight: 250g)- Sorting and feeding system manufactured by Fa. Steyer (equipped with 2x MFS 158 speed controller units designated for "TOPF" bowl and "SCHIENE" rail)- Separator / feeding system via conveyor belt- Pneumatic power chuck- Tool holders Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, Iodpfxsyzza Is Abveth chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: used, Year of construction: 2004, operating hours: 3,862 h, machine/vehicle number: LC619, Used Tetra Pak TBA-8 SQ 1000 ml filling lineTechnical Specifications & Performance DataThis complete aseptic carton packaging line centers on a Tetra Pak TBA/8-1000 SQ, delivering reliable performance for high-quality beverage production and industrial packaging applications. Engineered for 1.0L carton formats, the line integrates filling, capping, conveying, case packing, and shrink-wrapping functions to provide a cohesive used bottling line solution for second hand operations seeking dependable uptime and consistent output.Primary filler: Tetra Pak TBA/8-1000 SQ (aseptic) (3.862 working hours).Production speed: up to 5,000 packages per hourContainer type: Carton (Tetra Pak style)Format compatibility: 1.0L cartonsCapping unit: Tetra Cap Applicator 88 Lid (for Stream Cap closures) ( 7.709 working hours).Secondary packaging: Tetra Cardboard Packer TCBP-70Shrink tunnel: Tetra Thermo Shrink Tunnel TTST-51Conveying: Accumulation conveyor system with Dicolube TP lubricationManufactured by: Tetra Pak engineeringLine application: Beverage production and industrial packagingAdvanced Automation & Control SystemsThe line integrates Tetra Pak automation across its modules for coordinated operation and optimized throughput. The TBA/8-1000 SQ aseptic unit ensures controlled filling conditions, while the cap applicator, conveyors, and end-of-line equipment synchronize for smooth handling and minimal bottlenecks. Safety interlocks and CE-marked protections support secure operation. Quick adjustments on the capper and packer facilitate efficient format handling within the 1.0L range.Centralized module controls for synchronized line operationAutomated cap application for Stream Cap closuresCE-compliant safety architecture across major modulesLubrication-assisted conveyor operation with Dicolube TPProduction Line Integration CapabilitiesDesigned as a cohesive packaging machinery set, this second hand line offers plug-and-produce integration across filling, capping, conveying, packing, and shrink-wrapping. The accumulation conveyor system stabilizes product flow between units, protecting upstream aseptic operations and downstream secondary packaging. The configuration is ideal for producers standardizing on 1.0L cartons.Inline configuration from aseptic filling to end-of-line wrappingConveyor accumulation for balanced flow and reduced stoppagesSuitable for beverage production requiring aseptic carton packagingOptimized for 1.0L cartons; straightforward adjustments within this formatMachine Condition & Maintenance HistoryThe equipment is presented in excellent working order and ready for immediate use, representing a dependable used bottling line for rapid deployment. Component-level details include:TBA/8-1000 SQ: 3,862 operating hours; excellent, ready for immediate useTetra Cap Applicator 88: 7,709 operating hours; working condition for Stream Cap c... Itedpozc Impjfx Abvsh

Condition: used, Year of construction: 2008, machine/vehicle number: DEPAL43, Used TMG VEGA 60 automatic Depalletizer 5000 BPHTechnical Specifications & Performance DataThis Automatic Depalletizer VEGA 60 is a robust solution engineered for reliable bottle handling in industrial packaging environments. Manufactured by TMG, it supports efficient unloading of bottles from pallets and integrates automatic interlayer management for streamlined operation. With a production speed of 3000 bph, it is well-suited for medium-capacity beverage production and used bottling line applications. Its design ensures consistent performance for both PET and Glass containers, particularly in 1.5L formats.Manufacturer: TMGModel: VEGA 60Year: 2008Production speed: 5000 bphBottle formats: Compatible with 1.5L bottle formatsContainer types: Designed for Glass bottle handlingAutomation: PLC-controlled operationSafety: Electronic safety barrierInterlayer management: Tier-sheet magazine with automatic interlayer removal; can remove protective hoods from the same magazineAdvanced Automation & Control SystemsThe VEGA 60 features PLC-based automation for precise and repeatable operation across shifts. The control logic enables smooth layer-by-layer depalletizing, coordinated motions, and clear fault diagnostics. The electronic safety barrier provides active operator protection, ensuring safe access during setup and maintenance while maintaining productivity. Quick settings allow fast adaptation to standard 1.5L bottle handling and efficient start-up after pauses.Production Line Integration CapabilitiesThis depalletizer integrates easily within new or second hand bottling equipment configurations. It can operate as a standalone depalletizing module or inline with conveyors, accumulation tables, rinsing machines, and downstream filling, capping, and labeling machinery. The automatic tier-sheet handling reduces manual intervention between layers, improving flow to subsequent packaging machinery. Its design supports both PET and Glass bottle logistics, making it a flexible choice for beverage production lines handling water, juice, beer, or wine in compatible formats.Machine Condition & Maintenance HistoryProfessionally engineered by TMG in 2008, this machine is presented as a second hand industrial packaging asset suitable for immediate integration once installed and commissioned. The PLC control and robust mechanical design contribute to predictable maintenance intervals and long service life.Operational Performance & VersatilityAt 3000 bph, the VEGA 60 is ideal for medium-output operations seeking dependable depalletizing performance. Automatic interlayer and hood removal minimize manual handling, reducing changeover time between pallet layers and enhancing workplace safety. The system is optimized for 1.5L bottles and supports both PET and Glass containers, aligning with a wide range of beverage production requirements and used bottling line upgrades.Installation Requirements & Site PreparationThe depalletizer requires adequate floor space for pallet infeed, tier-sheet magazine access, and discharge conve... Itsdpfxozc Hqys Abvsh

Condition: used, Year of construction: 2012, machine/vehicle number: LC647, Used Sidel complet filling line for water, PET 36000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-efficiency PET still-water production system engineered for industrial packaging and beverage production. Designed around a 0.55L format and the 30/25 PCO1881 neck finish, it delivers a nominal output of 36,000 bottles per hour. Major equipment includes a Sidel SBO20 blow molder with 20 cavities, a Sidel EUROPA WM filling monoblock configured with 60 filling valves and 15 capping heads, and a Krones Contiroll HS labeling machine for continuous high-speed labeling. The line is a robust second hand solution for producers aiming to scale PET water operations with proven reliability.Production speed: 36,000 bph (design format 0.55L)Primary format: 0.55L (550 ml) bottlesNeck finish: 30/25 PCO1881Containers: PET bottlesBlow molder: Sidel SBO20, 20 cavitiesFilling monoblock: Sidel EUROPA WM, 60 valves / 15 capping headsLabeler: Krones Contiroll HSCap feeding: Sidel Aidlin 24 cap feederLine year: 2012 (core filler unit 2011)Advanced Automation & Control SystemsThe line integrates synchronized control between the blow molder, filling monoblock, cap feeding, and labeling systems to maintain stable, high-speed operation. Central operator interfaces coordinate start/stop sequences, speed ramps, and fault diagnostics. Safety interlocks, guarding, and emergency stops protect operators while ensuring consistent uptime. Quick adjustments and recipe-based parameters support repeatable setups for the 0.55L format, minimizing changeover downtime and optimizing overall equipment effectiveness.Production Line Integration CapabilitiesEngineered for inline operation, this PET bottling equipment connects via conveyor systems with accumulation and transfer sections for smooth product flow. The configuration supports still water applications with the 30/25 PCO1881 neck finish, enabling efficient handling from preform feeding and blow molding through filling, capping, and wrap-around labeling. The system architecture allows integration with upstream and downstream equipment such as inspection, case packing, and palletizing to form a complete beverage production and industrial packaging solution.Machine Condition & Maintenance HistoryThe line is still in production, indicating maintained operability and continuous performance under real operating conditions. Components have been kept in working order to support ongoing output. This second hand PET water line benefits from active status, helping prospective users evaluate performance and plan for a smooth transition to new production requirements.Operational Performance & VersatilityOptimized for still water, the Sidel EUROPA WM monoblock combines precise filling with consistent capping torque control across 15 heads. The Sidel SBO20 blow molder provides reliable preform heating and stretch-blow performance across 20 cavities for stable bottle quality at high speeds. The Krones Contiroll HS delivers continuous, high-speed labeling accuracy suitable for demanding PET... Iodpfx Aozc Hqmobveth

Year of construction: 2017, condition: used, machine/vehicle number: AT108, Used COMTEC heating tunnel - year 2017Technical Specifications & Performance DataThis COMTEC bottle heating tunnel is engineered to stabilize bottle temperature immediately after filling by showering containers with warm water. By reducing thermal shock, it helps protect both product integrity and container quality across a wide range of beverage applications. Manufactured in 2017, this second hand unit offers reliable performance for industrial packaging and beverage production environments, and can be integrated within a used bottling line or operate as a standalone temperature-conditioning module.Manufacturer: COMTECYear: 2017Model: 4MQProcess function: Post-filling warm-water spray (rain/shower) bottle heatingPrimary purpose: Temperature stabilization to reduce thermal shock and prevent bottle damageContainer compatibility: Designed for PET and Glass bottlesApplication stage: Downstream of filler, upstream of labeling/packagingOperating mode: Inline continuous tunnel with warm-water recirculation and spray distributionAdvanced Automation & Control SystemsThe tunnel utilizes controlled warm-water distribution to ensure even coverage and consistent temperature conditioning. Standard industrial controls enable operators to manage process parameters, monitor spray performance, and coordinate with upstream and downstream equipment. Integrated safeguards and interlocks support stable operation within modern bottling equipment setups.Centralized operator controls for process managementConsistent spray pattern for uniform bottle surface wettingDesigned for integration with line PLC/HMI architecturesOperator protections with standard industrial safety interlocksProduction Line Integration CapabilitiesEngineered for seamless integration into existing production lines, the heating tunnel connects easily to conveyors and synchronizes with fillers, rinsers, labelers, and downstream packaging machinery. Its post-filling placement makes it suitable for a wide range of formats and production speeds in beverage production and industrial packaging environments.Inline or standalone operationCompatible with typical bottle conveyors and accumulation systemsSupports multi-format operations common to used bottling line upgradesMachine Condition & Maintenance HistoryThis 2017 COMTEC tunnel is presented as a second hand solution in working condition, ready for operation within a modern packaging line. Its warm-water shower process helps extend container handling reliability, providing a practical enhancement to quality and throughput.Operational status: Ready for operationCommercial use: Suitable for integration into a used bottling line or industrial packaging cellOperational Performance & VersatilityThe tunnel’s warm-water shower process supports beverage producers seeking to minimize thermal stress following cold or ambient filling. It is well-suited to a variety of bottle sizes and shapes typical of... Ijdpfxszc Hqgj Abveth

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 09.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy saving, and very quiet Control with air valve Core pull control 12-fold hot runner control Injection unit hardened - bimetallic Main drive motor - servo motor with inverter for energy saving The injection unit is powered by a servo motor, controlled by inverter Machine with cylinder / compressed nitrogen accumulator (additional charge for fast cycling) Central lubrication Automatic mold height adjustment Kistler sensor – mold pressure regulation The injection molding machine was operated in a so-called 'cleaning room', equipped with extra protective devices against contamination as well as two fume absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X-, Y-, and B-axis (rotation) pneumatic Safety package for robot Itedezc N R Aopfx Abvoh Robot with adapter, conveyor belt with electric height adjustment, protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6840 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are test run by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Arburg 370E 600-170 with Arburg Multilift Select robot / All-electric injection molding machine Year of manufacture: 11.2017 Injection unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosage volume: 85 ccm Itedpozc Nm Rjfx Abveh Clamping unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping system: toggle Control system: SELOGICA - touchscreen Additional equipment: Production line with Arburg Multilift Select robot and conveyor belt All-electric machine: high-speed, energy-efficient, and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 24 zones Hardened injection unit – bimetallic Main motor: servo-driven with inverter for energy saving Injection unit driven by servo motor controlled by inverter Parallel movements Central lubrication Machine with two cylinders / nitrogen accumulator (extra charge for high-speed operation) Integrated Arburg conveyor belt and sorting flap Arburg Multilift Select robot, 6 kg, transverse Year of manufacture: 11.2017 4-axis robot: 3 axes servo-driven (electric), C axis pneumatically driven Stroke (axes): X-600, Y-800, Z-1800 mm Robot safety package Robot with adapter and safety housing Purchase of robot and conveyor belt possible at additional cost Dimensions: Weight: 3600 kg Length/width/height: 4.00x1.45x2.04 m All offered machines are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2007, operating hours: 62,000 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 70 mm, displacement volume: 1,077 cm³, Clamping unit: Clamping force 2500 kN Mould opening force, max. 169 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1877 bar Stroke volume 1077 ccm Shot weight (PS) 980 gr. Ijdpfxozfptho Abvjth Injection rate 385 ccm/s Screw speed 220 1/min Plasticising rate max. 76 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 29 kW Adjustable barrel heating zones 6 Oil Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,50 x 2,20 x 2,40 m Total machine weight 14500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei robot LR100 X: 550 mm, Servo Y: 1200 mm, Servo Z: 2000 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x hydr. core pull - 1 x Air valve - Accumulator - 6 x hotrunner controller - Robot interface according to Euromap 67