Used Diaphragm Accumulators for sale (494)

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. Rcedjxv Dv Eepfx Agzsk - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: new, Hydac 3206365 CO - unit with G 80C4 3030923 motor SN: 13-Z180034, valve block, DB4E-CE safety valve, EDS 3446-2-0250-000 pressure switch, SBO200-1E1/112U-200AK pressure accumulator - 135 bar and liquid level control - with instructions and certificate, unused, 100% functional, scope of delivery as per photos Redpfxjnkqz Re Agzjck

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty container stacker Load center: 1220 Mast type: Duplex Rsdpex H Dbfofx Agzjck Transmission: ZF WG211 automatic 5/3 Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires Size: 14.00-24 Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Size: 14.00-24 Rear tires Condition: 40 - 60% Elme 584 sidespreader 20ft-40ft with hooks and hydr. clamp for double box lifting, hydr. center levelling of spreader +/-3°, hydr. sideshift +/- 600mm DE: hydr. extendable spreader support device on lift mast, lift suspension by hydraulic accumulator, central lubrication system, automatic speed reduction depending on lift height, mast inclination and whether container is/are clamped, electric motor preheating (230V), one-touch function on joystick for automatic spreader adjustment 20'-40', driver's cab with air conditioning and sun blinds, air-suspended driver's seat with headrest and heating, EN: hydr. spreader support device on lift mast (for safety of container checker), lifting suspension by hydr. accumulator, engine pre-heater (230V), central greasing system, air condition, drive speed limitation depending on lifting height and tilting angle of mast, one touch function on joystick for automatic spreading of spreader 20-40, air-cushioned driver seat, passenger seat, sun blinds at roof and rear windows condition: checked, repaired, serviced and cleaned = ready for work

Condition: excellent (used), functionality: fully functional, sheet thickness steel (max.): 3 mm, sheet thickness (max.): 3 mm, outer diameter: 80 mm, HEAVY-DUTY HIGH-PERFORMANCE TUBE MILL OTO 80.3 QTC With complete Quick Tool Change System Made by OTO MILLS PRODUCTION RANGE • Diameter range 19mm – 80mm • Thickness 0.8mm to 3.2mm • Speed Max. 150 m/min • Working direction Left - Right Scope of supply: 1. Entry Line made OTO MILLS with: • Double Uncoiler OTOAD256 -PA • Double strip peeler for opening from top/bottom • Automatic strip joiner OTO GG254 • Floop vertical accumulator 2. OTO 80.3 QTC tube mill made OTO MILLS with: • Casted Iron stand • Bottom shaft height adjustable • Reinforced motor and gearboxes 2-speed transmission • Hydraulic nuts • Double length cooling tunnel • Motorised turk-head for fast adjustment 3. Quick change rafted system OTO QTC - 2nd set of cassettes off-line including : • 1 complete cassette for forming • 1 complete cassette for fin-pass • 1 complete cassette for sizing • Quick – plug automatic cardan connections 4. 150 m/min Flying saw – High Speed cold saw OTO TCCG160 with : • Carriage motion with 70kW motor • Cutting head motion with hydraulic control • AC Rotation of the blade 5. Automatic packer MAIR SQ.HEX.90.D.5.SL with emulsion draining and bundle weighting system • Possibility to make hexagonal and square/rectangular bundles • 5 modules for production of tubes 4-10m (12m for thickness >1.8mm) • Including emulsion draining, and weighting unit • 3 chains for finished bundle storage • Test tube zone, with cutting saw for the test tube 6. Automatic strapping unit SIGNODE M400 7. Zinc spraying METALISATION 250 • 1 metallisation cabin Redpfx Agsvr Tntezeck • 1 zinc spraying unit METALLISATION ENERGIZER 250 • 1 Zinc spraying gun ARCSRPAY 528E 8. Fume exhaust system • Fume exhaust conducts and exhaust covers on the required points a • Filter for fumes 9. Complete set of rolls (*See details) NEW PARTS SUPPLIED IN 2023/2024: 10. Thermatool CFI 350-VF Solid state welder with : • Automatch • Selectable frequency 250-400kHz • Thermaview control panel 11. Cooler PARKER, Model hyprechill Maxi 12. Inner scarfing hydraulical Blissenbach, with all the toolding for ID 30-50m 13. OPTRONIC CNC control unit for driving flying saw (Switzerland) 14. New Emulsion plant with : • Pump and heat exchanger • Fillters • Electrical controls and monitoring 15. New motor and electritical cabinet for accumulator 16. New motor and control for sizing section

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 678 cm³, injection pressure: 2.007 bar, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, installation height: 330 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,150 mm, Equipment: documentation/manual, warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX controller: MC5 year of construction: 2011 clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included screen text german CEE-socket 16A pressure accumulator for uprated injection speed Handling without safety fencing core pulling hydraulically 2x machine incl. Handling machine without material hopper Anti vibration mounts interface EUROMAP 67 interface for handling Schuko-socket 10A measures & weight measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG Rcedpfx Agex Eyuxozok technical data robot-system handling type: Linear manufacture: Wittmann controller: W 833 year of construction: 2011 handling weight: 10 kg X axis: 900 mm Y axis: 1800 mm Z axis: 3000 mm B axis rotationn: 180 ° C axis rotation: 90 ° screen-text: deutsch total weight: 560 kg

Year of construction: 2006, operating hours: 79,000 h, condition: excellent (used), Tetra Pak A3 Flex,2006,1000 ml Slim filling machines, -Filling Machine: Tetra Pak A3 Flex,2006,1000 ml Slim, Rcodstv I Dujpfx Agzok DIMC light cap 24,100V, 79000 h - Accumulator: Tetra Pak, Tetra Pak Helix 21, 2002 - Capper: Not available - Carton Packer: Tetra Pak TCBP70 2002 Availability: from now on

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Rsdpfoxukh Esx Agzjck Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: used, Year of construction: 2008, operating hours: 34,590 h, Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typ. 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilization utilities) Dimensions & Weight Approximate footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are indicative for this A3/Flex configuration and should be confirmed during inspection/FAT. Advanced Automation & Control Systems Redox H Thuopfx Agzock The A3/Flex platform features OEM PLC-based control with a touchscreen HMI for recipe handling, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and packaging quality at high speeds. Typical capabilities include: Recipe management for UHT milk, juices, and beverage variants Integrated process supervision and event/alarm logs I/O provisions for upstream/downstream line devices Recommended verification prior to start-up: PLC functions, valve actuation, pump performance, and seal integrity Production Line Integration Capabilities This aseptic carton filler integrates efficiently within a used bottling line or new beverage production layout: Upstream: packaging material feed and sterilization modules as per OEM design Downstream: conveyors to accumulation, straw/cap applicators, case packers, palletizers Utilities/process: interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Controls: standard digital/analog I/O and fieldbus-ready architecture depending on configuration Ideal for second hand industrial packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition & Maintenance History Condition: used, currently in storage Approximate machine hours: ≈ 30,000 Operational note: continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves, PLC functionality, elastomers and seals Routine inspection, replacement of wear parts, and validation of aseptic barriers are advised prior to restart.

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Rsdpfxewm Ih As Agzsck Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: new, OLEA: ANTI-RUST OILING SYSTEMS, made by EUROMAQUINA Single piece or bundle water-repellent oiling. Complete bundle oiling system. 1. Flow control Optimum for every diameter and production speed 2. Plug & Play Installation and commissioning in a few hours 3. Quick change Nozzle adjustment always from the outside for the whole range 4. Minimal consumption Air-oil spraying to reduce consumption by up to 75% 5. Low pressure micro spraying No mist in suspension Uniform adhesion on the tube surface Rjdpfx Aswq Nghjgzock 6. Adaptable design Designed to easily adapt to any line and customer need 7. Compact Only needs 250mm of free space in the line With position adjustment system by means of a diaphragm With this system, we can adjust the position of the nozzles from the outside, without having to open the rack or replace it and at the same time adjust the size of the opening to limit the possible oil leakage to a minimum. No oil suction system or collection tray with filter is required. Flow control: Optimum for every diameter and production speed Plug & Play: Installation and commissioning in a few hours Quick change: Nozzle adjustment always from the outside for the whole range Minimal consumption: Air-oil spraying to reduce consumption by up to 75% Low pressure micro spraying: No mist in suspension & uniform adhesion on the tube surface Adaptable design: Designed to easily adapt to any line and customer need Compact: Only needs 250mm of free space in the line

Condition: ready for operation (used), Abel EM-025Z0110-SG electromagnetic diaphragm pump SN:3001080-01 + Lenze GST06-2M VAL 090C12 spur gear + MHEMAXX090-12C1C three-phase motor, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Rcedpfx Agji D Eygszsk

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Redjx H Au Ropfx Agzeck Screw diameter: 80 mm Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Accumulator English, French, Czech language available. Hours: 61000

Condition: used, This listing is for a Eppendorf Concentrator AG The unit is in full working condition and is ready for immediate release The Eppendorf Concentrator plus is a benchtop device designed for the efficient and gentle vacuum concentration of DNA, RNA, nucleotides, proteins, and other liquid or wet samples. It features advanced heating technology and a chemical-resistant, maintenance-free PTFE diaphragm pump, eliminating the need for oil changes. The system offers versatility with a wide variety of rotor options to accommodate tubes from 0.2 mL to 50 mL, as well as microplates and PCR plates. Key Features Motorless drive and sealed chamber for trouble-free operation Whisper-quiet operation (60 dB), even with the pump on, for a pleasant working environment Automatic vacuum release prevents sample bumping or foaming Rcjdpsxv D D Njfx Agzsk Integrated brake mode for a faster rotor stop and quicker access to samples Three evaporation modes (aqueous, alcohol, and off) Four heating levels (30°C, 45°C, 60°C, and ambient) to match sample and solvent needs, reducing processing time System Options Basic System Includes the Vacufuge Concentrator and a 48 x 1.5 to 2.0 mL rotor AC receptacle for external vacuum pump connection All pump functions, including vacuum release and evaporation modes, are controlled by the concentrator

Year of construction: 2013, operating hours: 1,000 h, condition: ready for operation (used), Additional Equipment 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer 2x ground temperature sensor with sword probe This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Application Types Extrusion Rsdpfxex D Ewmj Agzsck

Condition: ready for operation (used), Abel EM-025Z0110-SG electromagnetic diaphragm pump SN:3001302-01 + Lenze GST06-2M VAL 090CM4 spur gear + M55AP090M045E00CT three-phase motor, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Rjdpfoi D Eyksx Agzock

Condition: used, This listing is for a 1 of 2 Charles Austin Capex 8C Diaphram Pump. The unit is in full working condition and is ready for immediate release. The Charles Austin Capex 8C is a highly efficient diaphragm pump designed to deliver a clean, oil-free vacuum and pressure source tailored for laboratory benchtop use. With its durable alloy casing and advanced engineering, the Capex 8C sets a new standard in versatile laboratory vacuum and pressure solutions. Features: - Oil-Free Operation: Ensures a clean environment, making it suitable for sensitive applications like microbiology and IVF treatments. - Quiet Running: Designed for low noise levels, ideal for use in laboratories without disrupting ongoing work. - Compliant with IEC 1010: Meets electrical safety standards, ensuring safe operation in laboratory settings. - Versatile Applications: Perfect for vacuum and pressure-assisted filtration, residue analysis, gas monitoring, and evacuating rotary evaporators or desiccators. - Lightweight Design: Easy to transport and reposition, enhancing usability across different workstations in a lab. Key Specifications: - Maximum Flow Rate: 8 L/min - Vacuum Level: 240 mbar (excellent for sensitive applications) - Pressure Capability: 200 kPa - Motor Type: Shaded pole motor for quiet and efficient operation Redpfexxx U Isx Agzjck - Dimensions: 282 mm (W) x 214 mm (D) x 137 mm (H) - Weight: 3.75 kg (lightweight and portable) Multipurpose Applications: - Microbiology Experiments: Ideal for creating a sterile environment during sample handling. - Embalming Procedures: Provides reliable pressure and vacuum for fluid transfer. - IVF Treatment: Ensures a clean, controlled environment for sensitive biological processes. - Waterjet Pump Replacement: A reliable alternative for general laboratory duties. - Aspiration and Filtration: Effective for removing particles and contaminants from samples. - Beauty Therapy: Used for vacuum treatments in cosmetic procedures.

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Rcedpfx Agex D Rqrjzek Application Types Injection Moulding

Condition: used, This listing is for a Watson Marlow 604S Peristaltic Pump The unit is in full working condition and is ready for immediate release. The Watson‑Marlow 604S is a laboratory/industrial peristaltic (tube) pump, designed for dosing, metering, and fluid transfer tasks where the fluid must remain isolated from moving parts. It’s part of the “600” series of Watson‑Marlow pumps and is intended for relatively high flow rates in a controlled environment (e.g. labs, pilot plant, certain chemical or processing setups). Because it’s a peristaltic pump, the fluid only contacts the inner wall of a flexible tube, which makes it suitable for shear‑sensitive, corrosive or potentially particulated fluids, without contaminating the pump internals Strengths Clean & Isolated Flow: Because only the inner surface of the tubing contacts the fluid, there is no risk of cross‑contamination or fluid leaking into mechanical parts. Good Flow Capacity: With a relatively high maximum flow (≈ 11 L/min), it can handle moderate bulk transfer in addition to dosing. Rcedpfx Agoxv Ad Ujzek Robust Housing: The IP55 rating makes it resistant to dust ingress and water spray, which is beneficial in industrial or lab environments with splashes. Variable speed control: The broad control range allows fine tuning of flow. Relative simplicity of maintenance: Replacing tubing is straightforward compared to more complicated pump mechanisms (valves, seals, diaphragms, etc.).

Year of construction: 2010, condition: ready for operation (used), This MH 4ZHP was manufactured in 2010. It features a continuous furnace, cooling system, and a conveyor system with an accumulation section. Key specifications include a passage width of 650 mm, passage height of 1100 mm, and a total system length of 11.53 m. Ideal for operations requiring extensive heating and cooling processes. Contact us for more information about this machine. Rsdpfxox D H H Nj Agzsck Application Types Other Machine Tools

Condition: used, This listing is for the KNF Neuberger Diaphram Pump The unit is in full working condition and is ready for immediate release Description: A compact and corrosion-resistant pump suitable for general laboratory use. Rcodpexv A Rbsfx Agzok Technical Features: 100% oil-free transfer Pure transferring, evacuation, and compression of gases Version for slightly aggressive or corrosive gases and vapours Maintenance-free Environmentally friendly Gastight, leakage rate approx. 6 x 10⁻³ mbar x l/s (not tested in serial production) Series N 022 diaphragm pumps are single-head, dry-running devices designed for a wide range of laboratory applications

Condition: used, This listing is for a Charles Austen Pumps Dymax 30 Vacuum Pump. The unit is in full working condition and is ready for immediate release. The Dymax series includes diaphragm pumps that are engineered to deliver a clean, oil-free vacuum or pressure source, making them ideal for a range of applications from laboratories to industrial settings. Key Specifications: Dimensions: Approximately 210 x 151 x 125 mm (width x depth x height), allowing for compact installation. Max Flow Rate: Capable of achieving a maximum flow rate of up to 14 L/min, ensuring efficient performance for various tasks. Rcedpexxz Nhofx Agzjk Ultimate Vacuum: Can reach an ultimate vacuum of up to 240 mbar, suitable for applications requiring low pressure. Weight: Each unit weighs around 1.6 kg, making it lightweight and portable. Features: Continuous Operation: Designed for long-term use without overheating, making them reliable for demanding applications. Whisper Quiet: Operates at low noise levels, ideal for environments where sound levels need to be minimized. Rugged Reliability: Built to withstand tough conditions, ensuring long-lasting performance. Flexibility and Customization: Can be tailored to meet specific requirements, enhancing versatility across different applications. Safety Compliance: Adheres to IEC 1010 standards, ensuring safety in operation. Applications: The Dymax series pumps are suitable for a variety of uses, including: Laboratory Use: Ideal for tasks requiring accurate and clean vacuum or pressure sources. Industrial Applications: Versatile enough for various processes in manufacturing settings. OEM Uses: Customizable options make them suitable for original equipment manufacturers needing specific functionalities.

Condition: used, This listing is for a Hirschman pipetus with charger station Rcsdpfxoxv Dznj Agzjk The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated colour display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, This listing is for a Hirschman Pipetus 100 Rechargeable Pipette Controller The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated color display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Rsdpfx Agsxv Ax Sezock Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, This listing is for a Pall Allegro 200 L Single‑Use Mixer System. The unit is in full working condition and is ready for immediate release. The Pall Allegro 200 L single‑use mixer (model LGRMXTTE200L230B) is engineered for scalable, robust mixing in biopharmaceutical operations. It is part of Pall’s Allegro single‑use technology portfolio and is designed for applications from media and buffer preparation through final formulation. Built with proven engineering principles and compatibility with Pall’s Allegro biocontainer film formats, it offers ease-of-use, reproducible performance, and minimal validation burden. Key Features 4‑Pitch Blade Impeller – Effective, low-shear mixing over a broad range of conditions. Bidirectional Flow Capability – Able to run clockwise (up‑flow) or counterclockwise (down‑flow), accommodating different density fluids and solids. Bag Inflation System – Mixer bag inflation provides a controlled mixing envelope, allowing consistent performance across 50–200 L volumes, and supports gas blanketing. Flush Drain Valve – Helps avoid dead legs by removing settled materials that might otherwise be left unagitated. Retention of Allegro Film Materials – Uses the same film as standard Allegro 2D/3D biocontainers for material consistency, reducing requalification effort. Optional Baffle Kit – To mitigate air entrapment at higher rotational speeds for shear-sensitive processes. Technical Specifications Parameter Value Model / Part Number LGRMXTTE200L230B Operating Volume Range 50 – 200 L Voltage / Frequency 230 V AC, 50 Hz Current Draw ~5.1 A Motor Power 0.37 kW Rotation Speed Range 50 – 200 rpm Materials of Construction Mixer tote in 304 stainless steel; film, manifolds, ports in LDPE / PS / silicone etc. Weight (empty system) ~120 kg Footprint (W × D) 1,054 mm × 748 mm Height 1,378 mm Gas Supply Requirements 4 – 6 barg (for bag inflation / blanket) Operating Temperature Range 4 – 40 °C Connections / Ports Inlet, gas inflation, exhaust, flush drain, powder addition ports etc. Applications Upstream Media Preparation – Efficient mixing of culture media and supplements. Downstream Buffer Preparation – Rapid homogenization of buffers or reagents. Final Formulation / Filling – Gentle mixing for drug products. Powder Addition / Reconstitution – Capable of handling solid-liquid mixing (e.g. powders) with repeatability. Shear-Sensitive Biologics – Low shear impeller design suitable for sensitive proteins or biologics. Benefits & Validation High Performance Mixing across Conditions – Demonstrated capability to mix a wide range of systems including liquid-liquid, solid-liquid, and viscous solutions with good speed and uniformity. Validated Materials & Safety – Components meet USP /, USP , , endotoxin limits, gamma-irradiation compatibility (up to 50 kGy), and leak-tested containers. Reduced Validation Overhead – Using the same film materials as existing Allegro biocontainers helps streamline requalification and process transfer. Minimal Dead Volume / Entrapment – Flush drain valve and optional baffles help prevent accumulation of settled solids. Scalable & Flexible – Supports operations from 50 L to 200 L with consistent mixing performance. Rsdpfx Aexl Dxlogzock

Condition: used, This listing is for a Agilent BioTek 405TS Microplate Washer. The unit is in full working condition and is ready for immediate release. Supplied with: (2) 4 Litre waste bottles Rcjdpfjxxx H Dex Agzek Microplate Holder The BioTek 405TS Microplate Washer 405TSRSQ is a top-tier instrument designed to streamline the washing process for various assay types, particularly in cell-based assays, microsphere assays, and ELISA applications. Here’s a detailed overview of its key features and specifications: Key Features: Patented Verify Technology: This innovative feature automatically checks for any blockages in the manifold tubes before initiating a wash cycle, ensuring that each wash is effective and reliable, minimizing the risk of failed assays. Ultrasonic Advantage: This functionality automatically cleans any blocked manifold tubes, helping to prevent clogging and ensuring consistent performance across multiple wash cycles. High-Resolution Touch Screen User Interface: The intuitive interface allows for easy setup and control of washing processes for both 96- and 384-well microplates, enhancing usability and flexibility. Dual-Action Manifold: This feature enables independent control and positioning of the aspirate and dispense sections, allowing for precise liquid handling and optimized washing techniques. Optimized Cell Washing: Designed for gentle washing of loosely adherent monolayers, the washer operates at low flow rates with angled dispensing to protect delicate cell structures during the wash process. Biomagnetic Separation and Vacuum Filtration: These optional enhancements provide advanced washing capabilities, expanding the versatility of the instrument for various applications. Specifications: Wash Volume: Configurable from 25 to 3000 μL per well, accommodating a wide range of assay requirements. Microplate Types: Compatible with 96- and 384-well plates, including both low profile and standard height, as well as solid and filter bottom options. Fluid Pump Type: Utilizes a diaphragm pump, ensuring consistent fluid delivery and performance. Instrument Control: Managed through a local touch-screen computer software interface, simplifying operation and customization of wash protocols. Number of Reagents: Capable of handling 1 to 4 reagents, allowing for complex washing and assay procedures.