Used Diecasting Machines for sale (65,751)

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device Ijdji Am Ukjpfx Ap Deih 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling) Iodpfslht Hzjx Ap Djih

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Motor 2,2 KW/400 Volt Table size approx. 580x715 mm Finely adjustable milling fence spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Spindle stroke 130 mm Tool up to Ø 180 mm Suction connection 2 x 100 mm Iedpfer Id S Esx Ap Djih Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Ijdpfer Ig H Tsx Ap Doih Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Iodpfsvk Scgex Ap Djih Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat Iiodpfx Apsvutw He Dsh 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Iodsv Trlmepfx Ap Deih Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Iisdpow D T Dkjfx Ap Djh Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ High-performance motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Electrical data Iiodohp Rcropfx Ap Dsh Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Isdpfehp Rc Iox Ap Dsih Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. Iiedpfxehqb Rco Ap Dsh The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Isdpocnxa Njfx Ap Doih Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW Iodpfoxdttpsx Ap Deih - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. Iisdpfsyy S Uaox Ap Deh The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Iijdjfig Rwepfx Ap Djh Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Iisdpfozt Twysx Ap Deh Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: excellent (used), Year of construction: 2021, 30-watt CO2 laser Working area: 457 x 30 mm Engraving and cutting of wood, paper, rubber, acrylic, etc. Exhaust system: Atmos Cube PC: HP ProDesk 400G7 Small Form Factor PC Includes monitor, keyboard, and mouse. Iiedpfxsz Surus Ap Deh Software: RayJetManager pre-installed.

Condition: used, Year of construction: 2003, Rausch Gratomat MS150/3-800 Multi-Spindle Deburring Machine 20-800mm workpiece diameter 150mm maximum vertcal working stroke 150mm maximum gear face width 1-8 modul range compatibility Iijdjz Stwvjpfx Ap Deh 4 number of grinding spindles 26,000rpm grinding spindle speed

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Iridesse Production Press’ colour production system Items for sale: 1 x Xerox Iridesse Production Press with the following specifications: Includes Fiery Server EX-P6 Includes paper decks A-CF03 + A-CF04 Includes stacker Isdpfezap Sbjx Ap Deih Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 14,303,610 pages Colour: Approx. 14,006,634 pages Black: Approx. 296,976 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, In this listing, you are purchasing a used “Francotyp FPi 2700 Envelope Stuffer, Serial Number” Item for Sale: 1 x Francotyp FPi 2700 Envelope Stuffer, Serial Number Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). Isdpfxezb Akme Ap Djih The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: not inspected (used), functionality: unexamined, Year of construction: 1994, machine/vehicle number: 7099, overall weight: 2,000 kg, total length: 5,600 mm, total width: 700 mm, total height: 1,600 mm, TRANSFLURID DB 2060 pipe bending machine - Bending capacity: 20 - 60 mm FCA D-35614 Aßlar - loaded onto a truck. Iisdpfx Ajz Sprcop Djh

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Iisdpfxezb Aivs Ap Doh Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: used, WEINIG UNIVAR 10 automatic rebating machine from a UC-Matic window production line, not in working order. Technical data: Iiedpfxjztv A Ss Ap Djh - Year of manufacture: 1997

Condition: excellent (used), Year of construction: 1993, grinding diameter max. 100 mm Iiodpfx Apsz S Nyms Djh max. width of grinding wheel 230 mm

Condition: used, Year of construction: 1970, max. wheel diameter 900 mm gear width 500 mm max. module 1 min. module 10 Iedpfxjz S Nyts Ap Dsih total power requirement 16 kW weight of the machine ca. 8.500 kg