Used Disassemble for sale (1,067)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Two identical machines are available, manufactured in 2021. The machines were only used for a short period in a test run at a large warehouse and were then professionally disassembled and stored. Therefore, they are in very good, fully functional condition. Documentation for the machines is available. The XF/XP 111 M is a fully automatic strapping machine with an upper sealing unit. It is designed to strap a large number of pallets of various sizes vertically with PP or PET strapping. This system is reliable, easy to operate, and, thanks to its compact dimensions, can be installed in a very small space. For PP and PET strapping Vertical strapping Tension up to 5,500 N Siemens PLC S7 Compact, minimal footprint Itedpfx Ajw Htz Isp Den Easy access to all mechanical components Simple operation with a touch screen The machines have been professionally disassembled and stored – they are available immediately. Additionally, 90 new, original Cyklop strapping rolls are also optionally available. Price per machine, net, plus VAT. A special price of €44,000 net, plus VAT, will be offered if both machines are purchased, ex warehouse RyFo.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Itjdpfow U Ry Nex Ap Dsn Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: KA27 - 14/796736, ABUS overhead crane, crane runway, bridge crane, indoor crane, crane Payload / lifting capacity 1.6t – 1600kg Span 9550mm, external dimension approx. 9700mm Year of manufacture 1998 with pendant control Lifting height 6m Hoist GM816 L06 Overall height top of crane to hook approx. 710mm (320mm beam + 390mm hoist) End carriage length without buffers approx. 220cm Optionally, two running rails 2x 40m HEA240 are available. Crane is disassembled and immediately available Very good condition, inspection logbook available Pillar jib cranes and wall-mounted jib cranes are also available Iedpfx Apjwzrtxs Dotn Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please inquire with postal code Collection preferred

Condition: refurbished (used), machine/vehicle number: 3439.39, Universal cylindrical grinding machine for external and internal cylindrical grinding. • Distance between centers: 650 mm • Height between centers: 175 mm • Completely overhauled (refurbished) – The machine was completely disassembled and rebuilt component by component. Guide rails were reconditioned, bearings were replaced, new control cabinet and new electrical installation, complete new paint job, and geometrical readjustment for maximum precision. • Equipped with a digital measuring system (Fagor). • Machine condition comparable to a new machine, ready for immediate use. • Extensive accessories included in the scope of delivery, as shown in the photos. • Demonstration under power and test run possible at any time. Itodpexxy A Tsfx Ap Den Availability: Available for immediate delivery!

Condition: good (used), Year of construction: 2008, functionality: fully functional, conveyor belt length: 1,950 mm, total width: 870 mm, Equipment: type plate available, Belt conveyor / Conveyor belt Manufacturer: VanderLande Condition: Used Year of manufacture: 2008 Total length: approx. 1950 mm Total width incl. motor: approx. 870 mm Total width excl. motor: approx. 700 mm Belt width: approx. 600 mm Belt type: Smooth (color: green) Material: Steel Frame height: approx. 170 mm Color: Light gray Including SEW motor Stock quantity: 3 pieces Price per piece Itjdeygyffepfx Ap Don The conveyor system was in operation until it was dismantled. Condition: fully functional, with signs of use Ideal for fast material transport Internal article number: 2026020301 Professionally disassembled and packaged Thanks to the excellent workmanship of the conveyor system, your material will glide smoothly to its destination, even under heavy load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in various industries, such as logistics, pharmaceuticals, trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers.

Condition: used, Year of construction: 2012, Overview (H2) This CIMEC S1/2 ADH labeling machine was manufactured in 2012 and is designed for labeling long-neck bottles in the formats 33cl, 50cl and 27.5cl. The machine achieves an output of up to 2,500 bottles per hour and is already disassembled and available at short notice. Technical details (H3) - Output: 2,500 bottles/hour - Bottle formats: - 33cl longneck - 50cl longneck - 27.5cl longneck - Machine rotation: clockwise - Bottle holders: 6 plates - Labeling stations: 2 self-adhesive label dispensers Iodpfx Apov Hcahe Dotn - Power supply: 380V / 3-phase / 50 Hz - Power consumption: 2 kW - Machine weight: approx. 1,200 kg - Bottle sizes: - Height: 200-380 mm - Diameter: 50-120 mm - Label sizes: - Front label: width 50-240 mm, height max. 140 mm - Back label: width 50-140 mm, height max. 140 mm - Max. Paper feed height: 150 mm (optional 195 mm) - Max. Label width at maximum speed: 150 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: NOH388/45, 1 Vetter / Demag wall-mounted swivel crane, 250 kg payload / lifting capacity Type AW2.5-7.0 Reach approx. 7m, 250 kg / 0.25 t payload with Demag DC chain hoist, 250 kg payload (2 lifting speeds) Crane available in quantity 2!!! Total weight approx. 450 kg Year of manufacture 2004, with inspection certificate Complete with wall brackets, jib, chain hoist, cable carrier, undercarriage and small parts Swivel range approx. 180° Iedpoxmd Rdjfx Ap Dstn Item location: 75053 Gondelsheim System is completely disassembled and immediately available See pictures Shipping by freight forwarder or collection Please inquire about shipping costs based on your postal code.

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Itjdswt Abwjpfx Ap Den Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Previous application: MB ABS, PP & PE, up to 120 kg/h Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Iodpfjx Sq I Nox Ap Djtn Subject to prior sale. Please visit our website and check out our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, MITUTOYO CRYSTA-Apex EX 9166T Coordinate Measuring Machine (900mm, 1600mm, 600mm), code No. (P/N): 191-294-30, Serial no. 60011258, MFG 2018 Measuring range: X-axis 900mm Y-axis 1600mm Z-axis 600mm Drive speed - CNC MODE: Drive speed 8 - 300mm/s; Measuring Speed 1 - 10mm/s - J/S MODE: 0 - 80mm/s Resolution: 0.0001mm Ijdey S Um Aspfx Ap Djtn Guide method: Air bearings on each axis Table loading - Maximum height: 800mm - Maximum mass: 1500kg Mass (including the control device and installation platform): 2889kg Air supply: - Pressure 0.4MPa - Consumption: 60 L/min under normal conditions (air supply: 120 L/min) Very good working condition. The buyer will be responsible for disassembling and getting everything ready for shipping; we will only cover the necessary logistical support, like a forklift. Please make an offer. ExWorks Simeria, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, For sale is a two-stage Leybold vacuum pump unit, consisting of a RUVAC WA 501 roots/rotary piston pump and an SOGEVAC SV 300 B rotary vane pre-pump. The components are mounted together on a base frame with a collection tray. Technical data and specifications: - RUVAC WA 501, catalog number 11730 - Nominal pumping speed RUVAC: 505 m³/h - Maximum pumping speed at 50 Hz: 410 m³/h - RUVAC motor: 2.2 kW, IP55 - SOGEVAC SV 300 B, catalog number 960717 - Year of manufacture SOGEVAC: 2019 - Effective pumping speed SOGEVAC at 50 Hz: 240 m³/h - Nominal pumping speed SOGEVAC: 280 m³/h - Motor power SOGEVAC: 5.5 kW - SOGEVAC nameplate weight: 207 kg - Last visible service record: 08/2024 Visible scope of delivery as per the images: - RUVAC WA 501 with motor Isdpfxozzr Nds Ap Detn - SOGEVAC SV 300 B with motor - Direct adapter and connection assembly - Cooling/fan unit - Sensor and connection cables - Base frame with collection tray Used condition with typical signs of use and storage, as well as some minor rust on the frame. The functional condition and achievable vacuum performance have not been re-checked after disassembly; therefore, it is sold as untested. A control cabinet, external cables, or documentation are not shown in the images and are not part of the described scope of delivery. Scope of delivery as per the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an extra charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps Iodpozzyd Aofx Ap Djtn * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: repair required (used), functionality: limited functionality, Year of construction: 2001, Installation for crushing waste from construction site bins and demolition concrete, manufactured by DBT. The technical specifications are presented in the attached documents. This machine will be sent to the workshop for a major overhaul of the jaw crusher drive system. The electric motors and gearboxes will be inspected. The unit will be disassembled and sandblasted before applying a rust-proof coating, followed by a two-layer varnish. CE marking will be applied. Ijdszxh N Ujpfx Ap Djtn

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR810NEU, total length: 1,415 mm, sweeping width: 810 mm, empty load weight: 465 kg, fuel type: electric, construction height: 1,120 mm, drive type: Elektro, construction width: 890 mm, Scrubber Dryer Chassis Number: NR810NEU Condition: New unit Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 24V Battery Capacity: 200Ah Battery Type: Waterless Battery Year of Manufacture: 2025 Battery Condition: New Description: - Delivers efficient cleaning performance of up to 4,860 m² per hour. - Compact design with a low center of gravity, tight turning radius, and flexible operation. - Integrated waterproof touch panel with LCD display for showing operating parameters and error codes; facilitates parameter adjustment and fault diagnosis. - Three speed settings and adjustable water flow. - Proprietary controller featuring protection against motor overload and low battery, effectively extending the life of both motor and battery. - ECO mode to reduce suction motor power and noise level, ideal for noise-sensitive environments. - Electric one-touch lift function for brush and squeegee holders; squeegee holder is automatically lifted when reversing for safe and efficient operation. - Dual brush/pad design with innovative quick-connect system for brushes or pads, making them easy to load and unload. - 120-liter fresh and dirty water tank capacity reduces the frequency of filling and emptying. Automatic alarm when clean water tank is empty or dirty water tank is full. Ijdpozydvaefx Ap Dotn - Large opening reversible dirty water tank with tool-free disassembly for easy cleaning and maintenance. - Seat equipped with safety switch, causing the machine to stop automatically when the operator leaves the seat. - Non-slip, durable tyres for reliable traction and optimal grip, even on smooth or wet floors.

Condition: used, mileage: 88,458 km, power: 121 kW (164.51 HP), first registration: 09/2023, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 07/2027, color: white, emission class: euro6, loading space length: 4,070 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, had accident, navigation system, parking heater, soot filter, * !!! Vehicle has engine damage – partially disassembled + missing parts !!! * Vehicle No.: - 35 * Euro 6 green environmental badge * Citroen Jumper L4 H2 Maxi van * Automatic climate control * Auxiliary heater * Rear-view camera * Navigation * Multifunction steering wheel * Cruise control * Lane keeping assist * Rear parking sensors * GVWR 3500 kg, payload * 3 seats * Electric windows * Electric mirrors * Central locking * Airbag Itodpszyw E Usfx Ap Dsn * ABS * ASR * German vehicle * Original mileage, ---- -> Please note that a viewing is only possible by prior appointment. Thank you for your understanding. -> Sale is only to commercial businesses or for export. The data, photos and equipment list listed above are for general identification of the vehicle only and do not constitute a guaranteed characteristic in the legal sense! All information / accessory details are provided WITHOUT GUARANTEE. Changes, prior sale and errors expressly reserved! The equipment list does not form part of the contract and must be checked in detail on site by each interested party before the purchase. Subsequent complaints will not be accepted.

Condition: refurbished (used), functionality: fully functional, overall weight: 81 kg, load capacity: 210 kg, warranty duration: 12 months, KUKA Zentralhand ZH 150/180/210 Art. No.: 00183005 – professionally refurbished component in stock Itjdpjzyy Hujfx Ap Dsn The Zentralhand has undergone a complete professional refurbishment process aimed at restoring its mechanical, functional and accuracy characteristics. The refurbishment includes complete disassembly, cleaning and inspection of all relevant parts, replacement of worn components and seals, professional reassembly, adjustment and final testing. After filling with oil, additional filtration of the oil and oil chambers is carried out in order to achieve the highest possible level of system cleanliness and to remove contaminants and any potential assembly residues. The Zentralhand is individually calibrated to match the original KUKA factory geometry. Each unit is supplied with its own identification plate and individual axis calibration offsets. Thanks to this calibration, the refurbished Zentralhand serves as a direct replacement for the original KUKA Zentralhand while maintaining the robot geometry. After replacement, the existing programmed positions are retained without the need for reteaching or additional adjustment of program positions. After calibration, the component is tested according to ISO 9283. Accuracy and repeatability are verified by measurement, and in these parameters the component meets the requirements of a new part. An individual ISO 9283 measurement report is included with the delivery. Warranty: 12 months. The component is in stock and ready for immediate installation, helping to minimize production downtime. At RSA Systems, we focus on the quality of refurbishment, accuracy and reliability of every refurbished component.

Condition: like new (used), Year of construction: 2014, machine/vehicle number: GSP-2004-1 09/12 PO-16277, functionality: fully functional, GULLCO-KAT GSP-2004 control panels, used in equipment and systems for the automation of welding processes. I have a total of 5 units: 2 units – new, unused (first 4 photos) 3 units – used, from disassembly The panels have original electronic components, regulators, switches, and control elements, as shown in the photos. Model: GULLCO-KAT GSP-2004 Iodpfx Asy Nmm Nsp Djtn Manufacturer: GULLCO Condition: 2 × new / 3 × used These panels may be an interesting offer for companies involved in industrial automation, welding, GULLCO equipment service, and spare parts. Sale is possible individually or in larger quantities.

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low-hours, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. Pelletizer * Mobile, containerized manufacturing system * "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. * ISO CO2 tank, 8 m3, portable on a frame, manufacturer: Wessington Cryogenics Ltd, England. Iodpfx Asy R I Tmop Dotn * 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 * All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: excellent (used), Year of construction: 2015, operating hours: 355 h, Cold Jet Aero 75 DX Machine We have various new parts in stock for Cold Jet machines. This machine is suitable for industrial cleaning, including both small and very large projects. An advantage of this machine is that it does not rely on new-generation electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine, complete with the following equipment: COLD JET AERO 75 DX DRY ICE (335 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator 2 x Nozzles (NEW) This is one of the best machines in the world. It has no electronics, which is why it is reliable and not expensive to maintain. Itodpfezkq N Ijx Ap Don For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance services for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 44m2 – used: Price ex works: €6,500 (net), disassembled, packed, and loaded! Item 3: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, probably 2014 Walkable roof with a maximum load capacity of 100 kg Element width: approx. 1.03m Length (internal): approx. 9.94m (10 elements) Depth (internal): approx. 4.38m (4 elements, plus one narrow element) Height (internal): approx. 2.61m Itodszqz Alepfx Ap Dsn 2 doors All offices are closed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale without furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 26m2 – used: Price ex works: €3,950 (net), disassembled, packaged, and loaded! Ijdpfx Apszqz A Es Djtn Item 2: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof is walkable with a maximum load capacity of 100 kg Element width: approx. 1.03m Length: approx. 6.31m (6 elements) Depth: approx. 4.24m (4 elements) Ground floor height: approx. 2.96m 1x door All offices are enclosed on three sides and therefore stand with one side against the hall wall. Without flooring Condition: good Available: from approx. Q4 / 2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, 2 stories with stairs, 2 large and one small room – used: Price ex works: €19,500 (net), disassembled, packaged, and loaded! Item 1: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, probably 2014 Height: almost 6m Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length: approx. 21.40m, the "gap" for the passage is approx. 4.40m long Depth: approx. 4.24m Ground floor height: approx. 2.86m All offices are closed on three sides and therefore have one side against the hall wall Without flooring Condition: good Available: from approximately Q4/2026 Iodpfjzqz D Aox Ap Detn Location: Hamburg

Year of construction: 2013, operating hours: 25,254 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: S40302, TOMRA AUTOSORT 4 optical sorting system equipped with VIS/NIR technology for the automatic separation of materials based on polymer and/or color. • Working width: 2,000 mm • Hour counter: 25,254 hours • Condition: operational until December 2025 • Current status: disassembled and available for inspection Iodpfx Apozbtvts Detn The hour counter indicates 25,254 hours, although a significant portion of these corresponds to periods in standby mode, meaning the actual operating hours of the scanner are lower. Suitable for sorting plastics and other materials using VIS/NIR identification, enabling separation by polymer type and by color.

Condition: used, Year of construction: 1979, Press force: 1000 t Stroke: 350 mm Frame width: 3030 mm Side frame opening: 1450 x 1400 mm Shut height (stroke up): 1400 mm Table area: 3000 x 2000 mm Iodpfxszyl Ans Ap Dstn Table height above floor: 430 mm Ram area: 3000 x 2000 mm Downstroke speed: 300 mm/s Upstroke speed: 340 mm/s Note: The machine is partially disassembled and currently in storage.

Condition: refurbished (used), Maja ESM 435 – completely overhauled and immediately ready for use The machine has been completely overhauled by us. During this process, all bearings were replaced, electrical components were exchanged, and a new power supply line was installed. The Maja ESM 435 impresses with its compact design and simultaneously large working area. It delivers very good results in terms of scaling, is easy to operate, and runs extremely quietly. This machine is particularly interesting for direct marketers, agricultural businesses with their own slaughtering facilities, and smaller butcher shops. Why choose a used machine from Amfotech? We are not a typical used machine dealer, but rather come from a technical service background. Therefore, each machine with us is: * disassembled and thoroughly inspected * technically completely reviewed * equipped with new wear parts * provided with new electrical components if necessary * delivered with a one-year warranty on used machines This way, you don't receive a machine that has simply been cleaned, but a technically overhauled machine that you can rely on in daily use. If you are interested or have any questions about the Maja ESM 435, please feel free to contact us directly. Iodpfjz Ah Sdsx Ap Djtn