Used Disengage for sale (35)

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm Csdpfx Aeif Sg Secwogu - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 360 mm Table height: 130 mm Transmission ratio: 120 : 1 Clamping surface: 375 x 430 mm Grid pattern on clamping surface: 400 x 125 mm, Ø 14 mm - Indirect indexing via handwheel on the worm gear, transmission ratio: 120:1 - Worm gear can be engaged/disengaged for direct and indirect indexing - Clamping via 2 clamping levers in any position - Crank handle with index plate - 1 index plate with hole counts: 22, 24, 29, 36, 37, 49, 57, 63 - 1 index plate with hole counts: 16, 27, 30, 33, 41, 47, 53, 61 - 1 index plate with hole counts: 23, 25, 28, 31, 39, 43, 51, 59 - 14 mm T-slots in the table surface - Table surface slightly face milled Overall dimensions L x W x H: 600 x 440 x 130 mm Cgodpfxey Sbwze Acwou Weight: 81 kg Good condition

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. Cedpfx Aey A D Ececwjgu 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: new, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Sanding belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" skew-grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (on/off) for automatic engagement/disengagement of the sanding roller sanding pad unit - Activation of segments via electronic control, which synchronizes their operation with feed speed and manages the number of active segments based on Cgjdpfx Ajhtuvrjcwou the workpiece geometry, allowing selection of more or fewer segments to the left or right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4” display with ‘eye S’ software integration NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Condition: used, Year of construction: 2021, operating hours: 2,891 h, 2021 | Sandvik QS332 Cone | Used Crusher | 2891 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 275000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 69 inspection points 67 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the crusher, only the front conveyor is slightly damaged on the edges. Presence of oxidation on some mechanical parts at the level of the track assemblies. Caution fault code 130 during startup "Clutch critical oil pressure" and "unable to disengage". Problem starting the crushing, but it works without problems. A service has just been done on the cone and the crusher. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40714 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Csdoy D Tw Rspfx Acwogu We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,870 mm, travel distance Y-axis: 1,840 mm, travel distance Z-axis: 250 mm, number of axes: 4, number of slots in tool magazine: 24, controller manufacturer: TPA Albatros, table length: 4,200 mm, table width: 1,300 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, 4-Axis CNC Machining Center – UNITEAM SPRINT 4012-M Highly comprehensive configuration, suitable for the production of furniture, doors, and windows Year of manufacture: 2003 Machine conforms to CE standards No. of controlled axes: 4 Axis strokes: X 4870 mm – Y 1840 mm – Z 250 mm – C 360° (for angular head management) Max axis speeds: X 85 m/min – Y 85 m/min – Z 25 m/min Working area: 4200 x 1300 mm No. 6 vacuum bars with 3 suction cups each No. 4 panel lifting bars Codpfx Acey Samhswogu No. 6+2 reference stops No. 6 disengageable clamps Vacuum pump: 100 m³/h Laser pointer Electrospindle: 9 kW (12 HP) – max speed 18,000 rpm – HSK63F interface Dual automatic tool changers (8 positions on head + 15 positions on Y axis) HSK63F angular head with variable tilt Independent angular head, point-blade, with pneumatic tilt 0/8° – 3 kW (4 HP) motor Independent horizontal motor, 5.6 kW (7.6 HP) – max speed 18,000 rpm Drilling unit with 14 vertical spindles – 2+2 and 1+1 horizontal – 3 kW (4 HP) motor No. 2 HSK63F tool holders included TPA Albatros CNC control (updated in 2018) with remote pushbutton panel Automatic centralized lubrication Front sensitive safety mats + full perimeter metal fencing User manuals + electrical schematic + CE certificate Installed machine footprint: 7500 x 3800 x 2350h mm Total transport dimensions: 13,500 x 2,400 x 2,400h mm Total weight: 5,000 kg

Condition: like new (used), functionality: fully functional, The Dürkopp Adler 888 - 460522-M CE is a professional, twin-needle, M-TYPE post-bed machine, engineered specifically for the manufacture of footwear and leather products. Its standout feature is the disengageable needle bars, allowing for highly precise corner sewing without overlapping stitches. Key Features and Functions: Feed Mechanism: Outfitted with triple feed (lower roller, needle feed, and driven upper roller), ensuring consistent and smooth material handling across various thicknesses. Disengageable Needles: Option to independently deactivate the left or right needle (electropneumatically), ideal for clean, decorative stitching at corners. Automation: Features an integrated direct drive motor and advanced automatic functions, including: - Thread trimming - Needle positioning - Automatic bartack (stitch securing) - Presser foot (roller) lift Cgedpsy Rytrjfx Acwju Applications: Specially optimized for shoe uppers, leather goods, and automotive upholstery production. Technical Data: - Maximum sewing speed: up to 3,000 stitches/min (equipment-dependent) - Maximum stitch length: up to 4–5 mm - Needle system: 134 LR, sizes Nm 70 to Nm 160 - Roller lift height: 12 mm - Needle gauge: 3.2 mm All functions are conveniently adjustable via a user-friendly control panel. Machine is in excellent, like-new technical condition! Customer delivery possible via Raben courier. For more information: +48 662 448 730

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Type: LZ 185 Swing diameter over bed: 365 mm, over cross slide: 225 mm Turning length: 750 mm Centre height: 185 mm Spindle bore: 40 mm Spindle flange: KK5 (DIN 55022) Spindle taper: MK5 Speed range: 20 – 1,600 rpm Heidenhain VRZ 773 B digital readout on 2 axes (scales on the cross and longitudinal slides) Dimensions: 1,900 x 900 x 1,700 mm Additional equipment: - Spindle brake with foot pedal - Adjustable stop on the cross slide (disengagement of feed) - Splash guard Accessories: - Operating manual - Multifix B holder with 2 inserts - Coolant pump integrated in machine base (no coolant hose connected) - Röhm 3-jaw chuck 200 mm with hard and soft jaws Weight: approx. 950 kg Condition: Used The machine runs smoothly and can be inspected under power. All information is provided without guarantee; errors excepted; all dimensions are approximate. Offer is subject to change without notice. The machine can be inspected by appointment. Changes and errors in technical data, information, and prices as well as prior sale are reserved! All prices are net plus VAT. Payment in advance, including any shipping costs, to be made within 14 days of contract conclusion. If the full purchase price is not paid within this period, the seller reserves the right to cancel the sales contract. Sale is only to commercial buyers within the meaning of § 14 BGB. The machine is sold with exclusion of warranty for material defects. This exclusion does not apply to claims for damages arising from liability for material defects which are based on gross negligence or wilful misconduct by the seller or his agents, or in the event of injury to life, limb or health. Any existing third-party warranty claims are assigned to the buyer. Please understand that I cannot assume any liability for compliance with any safety regulations that may be applicable to you or generally required concerning the machine and its components. Ensuring such compliance is the responsibility of the end user. All contracts concluded are subject exclusively to the law of the Federal Republic of Germany to the exclusion of the UN Sales Convention. Place of jurisdiction agreed as Mannheim. Codpfxow Svtce Acwsgu

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Codpfjyw Ndmex Acwegu Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: new, Year of construction: 2026, Universal Lathe GOLIAT 800 x 3000 (CJ6280QC/3000) Solid cast iron bed construction ensures maximum vibration reduction. Additionally, the bed is hardened and precision-ground. It is highly resistant to torsion and does not vibrate, meeting the basic requirement for accurate turning. Centralized feed control system, lead screw, and feed rod for threading. Digital readout operates in three axes: longitudinal, cross, and compound slide. Processed electronic signals from optical scales display measured movement values on a digital screen. The lathe is equipped with a high-quality, reinforced spindle bearing system. Modern spindle support with ball bearings. Optimal performance is ensured by a large spindle bore of 105 mm, 3000 mm between centers, a 315 mm 3-jaw chuck, 500 mm bed width, and a powerful 7.5 kW motor. Rapid longitudinal and cross feed system significantly reduces machining time and increases productivity. Hardened and ground gears in the spindle gearbox ensure long-term operational stability. Equipped with a lead screw and feed rod for threading, as well as automatic longitudinal and cross feeds. Easy adjustment of spindle speed and automatic feed via an ergonomic control panel on the gearbox. Thread dial indicator designed for precise thread counting. This function saves time by allowing the lead screw nut to be disengaged and the carriage quickly returned to its original position manually. The bed features a removable gap for machining larger workpieces, such as discs. This model allows machining up to a maximum diameter of 900 mm with the gap removed. Technical Specifications: Max. turning diameter over bed: Ø800 mm Max. turning diameter over carriage: Ø540 mm Max. turning diameter in gap: Ø1010 mm Gap length: 240 mm Distance between centers: 3000 mm Bed width: 500 mm Tool size: 25 × 25 mm Max. compound slide travel: 145 mm Max. cross slide travel: 375 mm Spindle bore: Ø105 mm Cgodpfoy H Emisx Acwsu Spindle nose: D1-8 CAMLOCK Spindle speeds: 12 speeds (36–1600 rpm) Number and range of longitudinal feeds: 65 (0.063–2.52 mm/rev) Number and range of cross feeds: 65 (0.027–1.07 mm/rev) Metric threads: 22 (1–14 mm) Inch threads: 25 (28–2 TPI) Module threads: 18 (0.5–7 mm) DP threads: 24 (56–4 DP) Rapid longitudinal feed: 4.5 m/min Rapid cross feed: 1.9 m/min Tailstock quill diameter: 75 mm Tailstock taper: MT5 Max. tailstock quill travel: 150 mm Tailstock cross adjustment: ±15 mm Main motor S1/S6: 7.5/9 kW / 400V Rapid feed motor: 250 W Coolant pump: 60 W Dimensions (L × W × H): approx. 4500 × 1100 × 1450 mm Weight: approx. 4600 kg (±2%) Standard Equipment: 3-axis digital readout 3-jaw self-centering chuck 315 mm 4-jaw independent chuck 400 mm Faceplate 400 mm Rapid feed system Steady rest Follow rest Fixed centers MK5 (2 pcs) Spindle reduction sleeve Cooling system Work light Chuck and tool post keys Set of service tools User manual CE declaration of conformity

Condition: used, Year of construction: 2011, Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of January 2025. Spare parts documentation is available.   Technical Data Manufacturer: KRONES Model: Topmatic Year of manufacture: 2011 Machine type: Rotary cold glue / hot glue labelling machine Bottle plates: 36 Capacity: up to 33,000 bottles per hour Direction of operation: Parallel bottle infeed and discharge Bottle type: Returnable glass bottles Operating hours: approx. 44,350 h (as of January 2025) Labelling stations: 2 labelling aggregates 1 × Neck and front label station 1 × Back label station (disengageable)   Glue system: 2 glue pumps Hot glue for neck label (tamper-evident / closure sealing) Cold glue for front and back labels 1 spare hot glue unit included Dimensions: Depth: 4,300 mm Width: 3,300 mm   Electrical supply: 400 V / 230 V, 3~ / N / PE, 50 Hz, 22 A Documentation: Spare parts documentation available Condition: Used, already dismantled and stored   Cjdpsyt Iltsfx Acwjgu

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1110001, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 3,500 rpm, No minimum price – guaranteed sale to the highest bidder! Further technical details about the machine can be found in the attached machine description. TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Spindle speed: 10 – 3,500 rpm Number of spindles: 1 Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 25 m/min Feed rate X-axis: 25 m/min Feed rate Y-axis: 25 m/min Feed rate Z-axis: 25 m/min Max. workpiece height: 1,250 mm Max. workpiece diameter: 1,230 mm Max. workpiece weight: 1,500 kg Table width: 630 mm Table length: 800 mm Table load: 1,500 kg Number of tool magazine slots: 122 Tool holder diameter: 130 mm Tool length: 630 mm Tool weight: 50 kg MACHINE DETAILS Control: Siemens Sinumerik 840C Coolant supply: 50 bar Dimensions & Weight Cedpfxjyw N Ire Acwogu Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm Weight: 30,000 kg X, Y, and Z axes Resolution: 0.001 mm Position uncertainty P: 0.010 mm Positional scatter Ps: 0.006 mm B-axis Positioning accuracy (face gear disengaged): 10″ Indirect measuring system B-axis indexing accuracy (via face gear): 6″ Machining accuracy Circular interpolation: 0.015 mm Runout in the taper of the working spindle: 0.006 mm Pallet change accuracy: ± 0.015 mm EQUIPMENT Documentation/manual Infinitely variable speed adjustment Chip conveyor Note: The door on the right pallet station is jammed.

Condition: excellent (used), Year of construction: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (tilting edge cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Wheel width: 130 mm Wheel diameter: 1200 mm Lift up/down – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase motor with brake Electric lifting/lowering motor: 11 kW Saw blade PV 45, length 8685 mm, thickness 1.2 mm, width 140/150 mm Feed drive with electronic controls: forward/reverse feed, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric disengagement Digital thickness adjustment with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l, 3 kW motor Complete hydraulic system Hydraulic blade guide, left and right (linear HIWIN) Hydraulic debarker / bark cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Cedpow E Ei Usfx Acwogu Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 brackets for pipe Water cooling – automatic hydrofor cooling system (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication system: 1 TRACK Welded frame, 14 m long Hydraulic clamp with two cylinders: 6 Hydraulic cant flipper: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter with mechanical rollers: 4 Hydraulic log lifter with hydraulic rollers: 7 Set of lifting rollers: 7 hyd. + 4 m, 1 pc Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 l, tank with single pump 50 l, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile cable tray for ventilation – 4 double trolleys 4 m belt output conveyor with 1 m feed + 3 kW electric motor, front section with hydraulic lift

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut Csdpfecc Ubuex Acwegu -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Condition: new, Year of construction: 2025, GSD Intern One of the best-selling and most popular conventional precision lathes Impressive thanks to: Sophisticated technology Highest accuracy Durability Proven ergonomics Minimal footprint And extensive accessories. Proven for decades in single-part and small-batch production, in trade and industry, training and continuing education, and tool and fixture construction. Distance between centers 650 mm Center height 160 mm Automatic handwheel disengagement Leadscrew and feed screw covers Main spindle brake Toolmaking precision according to DIN 8605 Pole-changing brake motor Headstock gearbox 16 fixed speed levels Numerical position display (option) LED machine light TECHNICAL DATA: WORKING AREA Center height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 650 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREADING RANGE Metric threads 0.25 – 8* mm Codpswhzcpofx Acwjgu TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 * Inch threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only available with additional change gears. This machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding the available options.

Condition: as good as new (ex-display), Year of construction: 2026, Demonstration machine. Like new. The machine is fully equipped with: - large, comfortable table - Inside fence with adjustment scale and quick adjustment for cutting strips. - 4 locking precision stops with sliding and interchangeable stop bars 500 mm long. - 2 left and 2 right T-slots parallel to the blades - Plexiglass protection for clear notching - Lift release with freely movable foot pedal - Three stroke types: set-up stroke, single stroke and continuous stroke - 1 front cross stop system consisting of T-slot and scale - 1 left and 1 right scale, parallel to the knives - 1 left and 1 right guide rail for notching magnification over 225 mm - 2 hold-down devices Two stations: Station 1 Disengage: cutting capacity: - 225 x 225 x 6mm in ST 45 - 225 x 225 x 4mm in stainless steel Station 2 punching with trump tool and/or cutting in thirty degrees max 4mm St45 max 3mm stainless steel Throat: max. 100mm Csdpfx Acjfhw N Iowsgu

Condition: used, mileage: 32,727 km, power: 120 kW (163.15 HP), first registration: 07/2024, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 5,140 mm, total width: 1,928 mm, total height: 1,909 mm, loading space length: 2,336 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0648.4418461 ----EQUIPMENT * Airbag: Thorax bag and pelvis side airbag for passenger * Airbag: Thorax bag and pelvis side airbag for driver * Seats: Two-passenger seat * Active brake assist * Rear camera (non-retractable) * Heated windshield washer system * Wooden floor (cargo area) * Interior paneling in cargo area up to roof height – wood * LED light strip in cargo area * Load securing rail system * Navigation accessory: Live Traffic Information * Navigation * Package: Park – Rearview camera – PARKTRONIC * Winter package – Seat heating for driver and passenger seat – Heated washer jets – Heated steering wheel * Tire pressure monitoring – on front and rear axle (wireless) * Rear door: Rear swing doors, opening up to side wall * Seats: Driver’s seat cushion depth adjustment * Seat heating on passenger side * Seat heating on driver’s side * Blind spot assist * Full partition with 1 window * Traffic sign assist * Electronic stability program (ADAPTIVE ESP) with integrated anti-lock braking system (ABS) – Traction control system (ASR) – Electronic brake-force distribution (EBV) – Brake assist (BAS) * Electrical wiring for trailer socket – electric wiring for trailer power supply – without trailer control unit * ATTENTION ASSIST: ATTENTION ASSIST supports the driver during long, monotonous journeys by monitoring attentiveness. If signs of fatigue or increasing inattentiveness are detected, it recommends a break. * Front cup holders * Removable tow hook front/rear * Axle ratio i = 3.267 * Airbag passenger side * Airbag driver side * Exterior mirrors electrically adjustable and heated, left and right * Outside temperature display * Battery: Buffer battery for starting process * Battery: AGM 12V / 92Ah * Attachment points in the roof frame * Hill-start assist * Third brake light * Adaptive brake lights * Comfort roof control unit * Diesel particulate filter * Electronic tachometer * Light assist – automatically activated headlights * Power windows driver/passenger – with anti-trap protection, quick lowering and raising * Generator 14 V / 250 A * Generator management – Generator management helps reduce fuel consumption and CO2 emissions. The alternator is disengaged, and the onboard electronics are powered by the battery when sufficiently charged. This relieves the engine from charging the battery during acceleration, for example. During braking and overrun operation on downhill runs, the alternator is re-engaged, and the vehicle’s kinetic energy is recuperated to charge the battery. * Speed limiter 210 km/h * Transmission: 6-speed manual gearbox TSG 380 * Weight variant 2,800 kg * Seat belt reminder for passenger seat * Seat belt reminder for driver seat * Lockable glove compartment * Tailgate * Side interior paneling in cargo area * Climate control – Tempmatic * Instrument cluster with pixel matrix display – Operated via multifunction steering wheel buttons – Round dials for speedometer and tachometer or fuel and coolant gauges – High-resolution white and red pixel matrix display between large round dials * Comfort driver’s seat Cgodpfx Aoxci Hcocwou * Comfort window opening/closing * Communication module (LTE) for digital services * Headrests (2) in front * Large fuel tank, approx. 70 liters * Solid paint * Steering wheel

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure Cgjdpfx Aex A Unxocwsu - Automatic belt rotation direction change MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Dimensions: 1500x1300x2050 mm (H) Weight: 1200 kg

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Csdpfjxzb Iiox Acwjgu Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: used, Year of construction: 2018, functionality: fully functional, OPTIturn TH 4010D Lathe Precision, geared lathe with digital position display, center height/distance 205 mm / 1000 mm, motor power 2.4 kW, 400 V, spindle speed 45-1800 rpm, spindle bore Ø 52 mm, spindle foot brake, with automatic longitudinal and cross feeds, CAMLOCK chuck mount, universally applicable workshop machine. Includes machine base with chip drawer, LED work light, coolant system, etc. Fully equipped engine lathes. Hardened and ground bed guideways Spindle mount: Camlock DIN ISO 702-2 No. 5 Guaranteed spindle nose runout accuracy better than 0.015 mm Gears and shafts hardened and ground, running in oil bath on precision bearings Motor circuit breaker DC 24 Volt electrics Lockable main switch Spindle direction (right/left) switchable at bed carriage Removable chip tray with guide rails Safety handwheels with disengage function on X and Z axes Emergency stop pedal Machine base with tool compartment on the right side. Digital Position Display DPA 21 User-friendly membrane keypad, splash-proof, sealed and glare-free Increased working accuracy Reduced error rate thanks to clear layout X, Y/Z0, Z axes with separate 8-digit displays Supplied sensor for spindle speed detection Glass scales on all three axes Connection voltage: 400 V Drive power: 2.4 kW Protection: 16 A Spindle taper: MT 6 Spindle mount: Camlock No. 5 Spindle bore: 52 mm Center height: 205 mm Center distance: 1000 mm Swing over bed: Ø 410 mm Swing over cross slide: Ø 270 mm Swing without gap bridge: Ø 540 mm Turning length in bed gap: 165 mm Bed width: 206 mm Spindle speed: 45 – 1800 rpm Number of gear steps: 16 Top slide travel: 100 mm Cross slide travel: 195 mm Longitudinal feed: 0.043 – 0.653 mm/rev Number of longitudinal feeds: 48 Cross feed: 0.015 – 0.206 mm/rev Number of cross feeds: 48 Metric thread pitches: 0.4 – 7 mm/rev Number of metric thread pitches: 42 Imperial thread pitches: 70 – 4 tpi Number of imperial thread pitches: 42 Maximum tool shank height: 16 x 16 mm Codpjykngrofx Acwogu Tailstock taper: MT 3 Tailstock quill stroke: 130 mm Quill diameter: Ø 45 mm Dimensions (L x W x H): 1920 x 740 x 1555 mm Weight: 750 kg

Condition: new, Year of construction: 2021, Stihl Lawnmower 53 cm Petrol RM 655.1 VS The STIHL petrol lawnmower RM 655 VS is a true powerhouse, thanks not only to its durable aluminium housing. With its Vario self-propulsion and a cutting width of 53 cm, it is perfectly suited for maintaining large areas. The central 7-stage cutting height adjustment allows you to choose the grass height from 25 to 85 mm. To make work easier from the start, the engine features the ReadyStart system, which ensures reliable starting. While mowing, the engine speed remains constant even when changing pace, and the mono-comfort handlebar ensures easy handling. A key highlight is the blade brake clutch (BBC) of the RM 655 VS, which disengages the mowing deck while the engine is running, so short pauses do not require restarting the mower. The foldable 70-litre grass catcher box with fill level indicator is easy to empty. With this petrol lawnmower, you are choosing a reliable partner for your garden work. Technical Data: • Aluminium housing with side protection strips • Guaranteed sound power level LWAd [dB(A)]: 98 dB(A) • Weight: 50 kg • Grass catcher box volume: 70 l • Displacement: 173 cm³ • Foldable grass catcher with fill level indicator • Comfort handlebar • Low-resistance wheels • Blade brake clutch (BBC) • Engine with easy-start system (ReadyStart) • Engine type: Series HD775 OHV SC • Mulching feature & multi-blade • Rated blade speed: 2800 rpm • Rated power: 2.6 kW / 3.5 HP • Lawn area: up to 2,500 m² • Cutting width: 53 cm • Cutting height: 20-85 mm • Super-soft grip • Uncertainty factor KpA [dB(A)]: 2 dB(A) • Vario wheel drive • Handlebar vibration level ahw: 3.8 m/s² Cgedjtvf R Eopfx Acwou • Vibration uncertainty K: 1.9 m/s² • Central cutting height adjustment The lawnmower is new and unused. It has only been on display and shows minimal storage marks. The mower cannot be shipped via parcel service due to its size and weight. Shipping within Germany (excluding island surcharge) is €79 net. International shipping is also possible, but costs must be specifically requested. We only ship within the EU. No shipping outside the EU. You will receive an invoice with VAT shown. Payment only by bank transfer – NO PAYPAL!

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance  Extremely compact construction for critical length threads  Thanks to disengaging clutch thread length is precisely controlled  One single head for internal and external threads  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets  Sizes 1, 2, 3, 4 and 6  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm.  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with Cgjdpfjxltzvox Acweu precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Condition: used, machine/vehicle number: HHKHFH14JD0000066, Year of construction: 2013, operating hours: 3,535 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 115 mm, mast type: duplex, construction height: 2,552 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: HHKHFH14JD0000066 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: Very good Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: Hoppecke-Battery Battery year of construction: 2012 Battery condition: 60 - 80% Cgodpfju D Tq Nsx Acweu Sideshift, Fork positioner, 3rd valve, 4th valve, windshield, heating, full cab, -Duplex mast V400 -4th line to fork carriage -Fingertip -Fork forks 1,200 mm -Tine adjustment with sideshift -Full cab with heating -Air-suspended seat -Rotating beacon -Drive disengagement with open doors

Condition: ready for operation (used), functionality: fully functional, mileage: 411,000 km, power: 240 kW (326.31 HP), first registration: 10/2016, overall weight: 20,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, empty load weight: 10,870 kg, tire size: 315/80/22.5, next inspection (TÜV): 06/2026, fuel: diesel, wheelbase: 3,600 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, machine/vehicle number: 2127, Equipment: ABS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, differential lock, hydraulics, immobilizer system, low noise, navigation system, onboard computer, parking heater, soot filter, traction control, trailer coupling, truck registration, Arocs 2033 with winter service equipment and municipal hydraulics, Meiller AK 12 NT telescopic skip loader body with BKE container securing system, fixed cab and radio remote control, rear-view camera, heated windscreen, hill start assist, disengageable ABS, lane keeping assist, rotating beacons. Vehicle was used only with snow plough, no gritting operation, German vehicle from first owner. We deliver to any German seaport. Cgodpfx Acexg R Rkswou Sale exclusively to businesses and without any warranty.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2127, mileage: 411,000 km, power: 240 kW (326.31 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 10,870 kg, overall weight: 20,000 kg, tire size: 315/80/22.5, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 06/2026, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, AdBlue, EBS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, hydraulics, lane keeping assist, low noise, navigation system, non-smoking vehicle, onboard computer, parking heater, power assisted steering, power mirror, seat heater, soot filter, tachograph, traction control, trailer coupling, truck registration, Arocs 2033 with winter service equipment and municipal hydraulics, Meiller AK 12 NT telescopic skip loader body with BKE container securing system, fixed cab and radio remote control, rear-view camera, heated windscreen, hill start assist, disengageable ABS, lane keeping assist, rotating beacons. Vehicle was used only with snow plough, no gritting operation, German vehicle from first owner. Cedpfsw Ivqyex Acwegu We deliver to any German seaport. Sale exclusively to businesses and without any warranty.