Used Disassemble for sale (880)

Condition: like new (used), functionality: fully functional, Year of construction: 2022, load capacity: 1,400 kg, working height: 6,000 mm, operating hours: 250 h, Equipment: documentation/manual, STILL FM – X 14. Reach Truck – 2 pcs. Forklift For sale: Reach trucks, condition like new, only 350 engine hours, year of manufacture 2022. Serviced exclusively by STILL. Detailed description see photo. • Quantity: The offer is for 2 units of STILL FM – X 14 forklifts. • Batteries: Attention, 2 batteries are included for each forklift (4 batteries in total) – ideal for multi-shift operations! • Hydraulic telescopic forks extendable from 80 cm to 120 cm!! Bdedpfsuvdbuex Agdof • Load capacity: 1400 kg Price: €15,900 Top condition, serviced exclusively at STILL !!! For sale: Reach Truck – condition like new, only 350 engine hours, year of manufacture 2022. Serviced exclusively by STILL.STILL FM – X 14. Reach Truck. x 2 pcs.Load capacity: 1400 kgPrice: €15,900Attention: The price includes 2 batteries, making it suitable for multi-shift operations!Detailed Description:Hydraulic telescopic forks: extendable from 80 cm to 120 cm!!Vehicle width: 1,302 mmLoad wheel tires: Diameter 285 mm, polyurethaneDrive wheel tire: Diameter 360 mm, polyurethaneBattery change: Side battery replacement via changeover rack, battery also transportable by craneMast functions: Hydraulic mast reach cross-shift +/- 50 mm, with mast tilt, including necessary hydraulics (4 functions)Fork carriage: Type A, 4 rollers, width of fork carriage: top 840 mm, bottom 755 mmOverall height: 3,300 mmFree lift (H2): 2,740 mmRated lift: 8,300 mmMaximum height (h4): 8,860 mmLoad capacity at maximum lift: 1,350 kgLift height sensor: LED height sensor – preparation for innovative lift height measurement using an LED light beam for precise measurement of optional assistance functionsForks: 1150 x 100 x 40 mm, 2A, LSP 600Hydraulic system: Central position of fork tilt/mast and sideshift selectable via buttonsTilt angle: 0.5/2 degrees forward/backward mast tiltTransport: Mast disassembled before shipping for easier transportOverhead guard: Driver's overhead guard with head paddingOverhead guard dimensions (short version): Overall height: 2200 mm, depth: 645 mmAdditional roof equipment: Overhead guard pillar for mounting MMS terminals or similar auxiliary equipmentInterior rearview mirror: Panoramic mirror on the drive side mounted on the overhead guard for improved visibility when driving out of rack aislesDisplay: Remaining battery charge indicator integrated into the displayDriver's seat: Hydraulically suspended comfort driver's seat MSG 65 with fabric coverSeat adjustments: Infinitely variable weight adjustment, backrest tilt, longitudinal adjustment, and lumbar supportHydraulic control: Joystick 4Plus (central control element combines lift, tilt, and auxiliary hydraulic functions, including horn)Drive activation: Designed as a foot and seat switch combined with single-pedal control and travel direction change via rocker switchSteering: Fully electric 360° steering, height-adjustable steering wheelIgnition switch: Start/Stop buttonAdditional electrical equipment: For external systems (data terminal and scanner) consisting of:Assistance system: Infinitely variable speed reduction depending on the steering angle (CSC - curve speed control)Warning device: STILL SafetyLight 4PLUS with 4 LEDs and a moving light spot in the direction of travel to show the vehicle's approach directionFleet Manager 4.0: Online fleet management via WEB application (GPRS - SIM card, access via employee cards, data, reports, ...)Number of batteries included: 2 pcs !!!!!Battery specifications: 48 V / 4PzS 620 Ah

Condition: used, Year of construction: 2009, construction height: 900 mm, lifting height: 4,200 mm, empty load weight: 3,810 kg, load capacity: 3,000 kg, For sale is a HYMO DXX30-42 M52H double-scissor lift table from 2009. The unit is equipped with 2 control panels and is in used but fully functional condition. It is ideally suited for industrial applications, production, warehousing, or workshops where heavy loads need to be safely raised to working height. The scissor lift table is offered free of charge, without any warranty, guarantee, or right of return. Bdsdpszqtidefx Agdof The buyer is responsible for disassembly, loading, and transport. (Germany, Ulm)

Condition: used, Manufacturer: MSK Tip: KOMBI-MULTITECH Year of manufacture: 2007 manual Bjdpfx Ajq U Rhpsgdedf The device is already disassembled and can be delivered immediately!

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,314 h, DG Tech – Authorized BLM Group Inspection Center In partnership with BLM Group, we manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high-quality standards. We handle logistics, disassembly, and transport directly, eliminating the risks associated with private sales. We provide dedicated software, technical training, and after-sales support. We also offer flexible operating lease solutions to optimize investment and productivity. Thanks to our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. LTFIBER load 6500 – delicate tube kit – 6500 – laser YLS 2000 discharge 6500 – suction chiller – tube kit up to 6" diameter – open profile integration – welding search – optimization of material utilization and bar management without breakage – powder micro-doser. Bedpezqzz Ijfx Agdjdf

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 250 V, We offer this used Wagner Ecotech System powder coating equipment, manufactured in 2007. - Powder coating booth with spray robot (6 spray guns) - Donaldson Torit dust extraction system (11 kW) Bedpfx Aozn Ixnegdjdf - 75m automatic Emotec conveyor system (disassembled). Year of manufacture unknown.

Condition: good (used), Note: - The images are for illustrative purposes. Bdodpfoziy Htjx Agdef - The material color may vary. - The workbenches are supplied disassembled. - The shelving uprights are pre-assembled. - The production time is typically approximately 3-5 working days. The scope of delivery includes: 01 x Used workbench Dimensions: 2,900 x 1,000 x 938 mm Consisting of: 02 x Used workbench uprights Manufacturer: Bito Type: PL 38 Material color: sendzimir galvanized Frame profile: P 25 Profile dimensions: 90x65x2.5 mm Adjustment grid: 75|75 mm Incl. transverse and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 900 mm high 1,000 mm deep 02 x Used workbench crossbars Manufacturer: Bito Type: PL 38 Material color: green Box profile: 127x50 mm Crossbar type: PT27.127LN Design: Head crossbars Clip type: 3 HK 2,700 mm clear width 02 x Used workbench crossbars Manufacturer: Bito Type: PL 38 Material color: green Box profile: 127x50 mm Crossbar type: PT27.127LN Clip type: 3 HK 2,700 mm clear width 08 x Used locking pins Used chipboard Material thickness: 38 mm Number of panels: 01 | 2,900 x 990 mm (two-part) 01 | 2,680 x 990 mm (one-part) 16 x Wing nuts Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front Bdjdoy U Auyepfx Agdef • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Bjdpfsy U Autex Agdedf Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Bedpfozq Ax Uex Agdedf Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. The stated price is for two units. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 1985, pressure 25 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : Bjdjzbu Spjpfx Agdodf MABU (D) High Speed 4 Column Automatic Punching Press model 25 VP / RC year 1985 Press force nominal 25 to Punching Speeds 120 - 600 strokes/min Stroke length adjustable 7 - 62 mm Ram adjustment range 50 mm Mounting height 225 - 310 mm Table size 560 x 640 mm Distance between columns sides 320 / 340 mm Distance between columns front/back 380 / 400 mm Opening in table / clamping plate 120 x 230 mm Ram clamping plate size 240 x 280 mm MABU Strip feed RACER 11 Max. strip width 150 mm Max. feed stroke 120 mm Main drive approx. 3 kW Total drive approx. 3,5 kW - 380 V - 50 Hz Weight approx. 2.400 kg Accessories / Special Features: • MABU Strip feed device model RACER 11 RCTF, mounted on the left side, stroke adjustable, infeed height adjustable, • Automatic continuous stroke and single stroke available as well as inching mode, piece counter, blow out device • Sep. control cabinet and switch cabinet, Vibration dampening machine shoes • Large, soundproof cabin (disassembled) • Various accessories, manuals and former safety test reports Condition : very good, press was regularly maintained ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of all kinds of presses available. Please let us know your requirements.

Condition: like new (used), Year of construction: 2024, Pallet racking system, Linde / Stow, frame height approx. 10.70m, 850kg / pallet position, approx. 23,108 positions – used: Price ex location: only €489,000 (net), disassembled, packed and loaded! Manufacturer: Stow Supplier: Linde Type: Pallet racking system Year of manufacture: 2024 Frame depth: 1.05m (still to be verified) Field load: max. 12,750kg Load capacity per pallet: 850kg Material list (6 levels): 68 end frames (H = 11,400 mm), complete with spacers, base plates and anchors Bodozlc Dtepfx Agdedf 1,256 intermediate frames (H = 10,700 mm), complete with spacers, base plates and anchors L = 2,700 mm: 12,340 crossbeams, load capacity per level 2,550kg L = 3,600 mm: 448 crossbeams, load capacity per level 3,400kg 1,142 surrounding upright protectors (H = 400 mm) 60 guard rails (L = 2,400 mm) 60 guard rails (L = 1,100 mm) 280 grid panels (880 x 1,100 mm) for aisles/passageways Condition: good – very good Available: immediately (but still needs to be dismantled) Location: Northern Italy

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Bdedpozk E Huofx Agdjf

Condition: good (used), Year of construction: 2011, Storage mezzanine, area approx. 623 m2, load capacity 500 kg/m2, incl. staircase and partial railings - used: Price ex works: only €18,000 (net) incl. disassembly, packed and loaded! = Only €29 (net) / m2 Manufacturer: Schmitt, Goldbach Type: Storage mezzanine Year of manufacture: 2011 Dimensions: approx. 20.35 m wide, 30.65 m long plus approx. 4.55 m x 7.22 m long The clear distance between the supports is 5.67 m in length and 3.62 m in width. Bodpfx Aszkabaegdodf I can provide you with the following additional information: Sketch attached Total 656.5 m2 minus staircase Headroom: 2.8 m Overall height: 3.2 m Load capacity: 500 kg/m2 Condition: good Available: immediately Location: Aschaffenburg area

Condition: used, Year of construction: 2019, machine/vehicle number: T17157, functionality: fully functional, operating hours: 32,000 h, input voltage: 40,000 V, input current: 4,000 A, input frequency: 10,600 Hz, type of input current: three-phase, oil tank capacity: 300 l, total length: 42,400 mm, total width: 11,200 mm, total height: 5,100 mm, overall weight: 107,250 kg, year of last overhaul: 2026, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, FOR SALE – BYSTRONIC FL400 TUBE & PROFILE LASER CUTTING SYSTEM High-Performance Laser Cutting Machine for Tubes, Profiles and Structural Sections As part of a strategic investment and the acquisition of a new MAZAK FG-400 NEO tube laser system, we offer for sale our Bystronic FL400 laser cutting machine. The machine has been operating in a professional steel service center and remains in daily production use. It is offered for sale due to replacement with a new system. _____ General Information: Machine: Bystronic FL400 Year of Manufacture: 2019 Installation & First Commissioning: October 2019 Current Location: Mikołów, Poland Condition: Fully operational and currently in production _____ Technical Specifications: Laser Source • CO₂ Laser Source • FANUC Resonator • Laser Power: 4,000 W Loading & Unloading Capacities • Maximum Loading Length: 14,000 mm • Maximum Unloading Length: 12,500 mm • Maximum Material Weight: 140 kg/m Round Tubes • Minimum Diameter: 40 mm • Maximum Diameter: 406.4 mm Square Profiles • Minimum Dimension: 40 mm Bjdpjzqudpjfx Agdjdf • Maximum Dimension: 300 mm Rectangular Profiles • Maximum Section: 300 × 200 mm Structural Sections • HEA / HEB: 100 – 280 mm • IPE: 80 – 360 mm • UPN / UPE: 40 – 240 mm • Angle Sections (L): 40 – 280 mm Maximum Material Thickness • Mild Steel: 20 mm • Stainless Steel: 8 mm • Aluminum: 6 mm Operating Status • Resonator Operating Hours: approximately 32,000 h • Machine remains in regular production operation _____ Additional Information The machine has been operated in a professional Steel Service Center specializing in the processing of steel tubes, profiles, and structural sections. The equipment is available for inspection under power at our facility in Poland. Photographs, sample production parts, and videos of the machine in operation are available upon request. _____ Documentation and Technical Details Detailed technical specifications, machine documentation, maintenance records, and additional operating information will be provided to qualified buyers upon request. Disassembly, packaging, and transport of the machine are the responsibility of the buyer.

Condition: good (used), Loading ramp – used: Price ex works: only €2,500 (net) including disassembly, packed and loaded! Manufacturer: unknown Type: unknown Year of manufacture: unknown Since the ramp does not have any certification or similar, it is being sold as scrap! Height Length: 5.42 m Width: 2.25 m (usable width: 2 m) Bedpfx Aezkadhogdodf Ramp height: 1.15 m Load capacity: no information available, but it has been used without any problems with a 2-ton forklift. Condition: good Available: immediately Location: Aschaffenburg area

Condition: used, Pallet racking – Used Pallet Racks – Large Stock Available – Regular Deliveries – Delivery to France & Europe As a specialist in used industrial racking, we offer a wide selection of pallet racks for warehouses, logistics platforms, workshops, stores and industrial buildings. Thanks to our regular deliveries, we have a large stock of pallet racking that has already been disassembled, inspected and is ready for quick shipment. Our stock includes: * Used pallet racks * Heavy-duty industrial racking * Pallet storage racking * High-bay racking Bdedpfxezmyktj Agdef * Customized storage solutions Numerous configurations available: * Heights up to 12 meters * Frames of different depths * Beams available in: * 1,800 mm * 2,700 mm * 3,300 mm * 3,600 mm * Loads from 500 to 1,000 kg per pallet (depending on the configuration) * Numerous storage levels * Configuration adapted to your warehouse We also offer all the accessories needed for a complete installation: * Metal gratings * Wooden shelves * Frame protectors * Pallet stops * Load plates * Spacers * Aisle protectors * Fall protection netting (subject to availability) * Anchors and fixings Contact us for a personalized quote based on your installation. Why choose our used racks? * Up to 80% savings compared to new * Stock immediately available * Robust industrial equipment from leading brands * Ideal solution to optimize your storage capacity * Quick installation * Excellent value for money Our services: * Technical advice * Layout planning * Customized pricing * Loading onto truck * Delivery in France and Europe * Assembly option For professionals only. To receive a tailored offer, please provide us with: * The desired height * The dimensions of your pallets * The number of spaces required * The load per pallet * The desired accessories (gratings, wooden shelves, frame protectors, pallet stops, load plates, etc.) Contact us to learn about our current stock and benefit from a storage solution tailored to your needs at the best price.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, overall weight: 230 kg, machine/vehicle number: RR42ABH, SCHORR RR42ABH – Professional wood chipper for branches up to 100 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR42ABH is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 100 mm in diameter and impresses with its robust design, high pulling power, and easy operation. Using the 3-point linkage (Category 1 and 2), you can attach the RR42ABH to your tractor in just a few minutes. The height-adjustable support feet keep it securely in position during assembly and disassembly, and the matching PTO shaft is included. With a power requirement of 18 to 50 hp, it is also suitable for smaller tractors and compact tractors. The self-feeding cutting unit with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping result and a consistent material flow. The large feed hopper allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is 290° rotatable, so the chipped material can be deposited in a targeted manner – whether in piles, trailers, or big bags. Advantages ✓ Compact 3-point mounted chipper for tractors from 18 to 50 hp ✓ Chips branches and brushwood up to 100 mm in diameter ✓ Extended feed hopper also handles bulky crown wood ✓ Robust knife disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ Height-adjustable support feet, quick 3-point mounting (Cat 1 & 2) ✓ PTO shaft included, ready for use in minutes ✓ Directly from the manufacturer, with spare parts stock & workshop service Technical data Manufacturer: SCHORR Model: RR42ABH Drive type: PTO, direct drive 3-point category: Cat 1 & 2 Max. branch diameter: 100 mm Chipping type: Drum, self-feeding Number of knives: 4 + 1 counter-knife Weight: 230 kg Overall length: 1070 mm Overall width: 830 mm Bsdpezilb Asfx Agdsdf Overall height: 1240 mm Discharge angle: 290° Recommended tractor power: 18-50 hp PTO speed: 540-1000 rpm The RR42ABH is designed for long-term use. All components are easily accessible, allowing maintenance work to be carried out quickly. Spare parts are available at any time from stock. Upon request, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please contact us.

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, number of slots in tool magazine: 5, total height: 3,100 mm, overall weight: 7,500 kg, table length: 4,000 mm, table width: 1,200 mm, spindle motor power: 7,500 W, spindle speed (max.): 18,000 rpm, This 3-axis IMA BIMA 610 V CNC Wood Machining Centre was manufactured in 1996. It features a working area of 4000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum drilling diameter of 45 mm. The machine is equipped with 5 drilling spindles in the X direction and 11 in the Y direction. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 610 V machine we have for sale. Contact us for further details. • CNC Control: NUM CNC Control • Drive System: Siemens SIMODRIVE 611 • Maximum Workpiece Length: 4000 mm • Minimum Workpiece Length: 150 mm • Maximum Workpiece Width: 1650 mm • Minimum Workpiece Thickness: 10 mm • Maximum Workpiece Thickness: 65 mm • Drilling Spindles (X): 5 • Drilling Spindles (Y): 11 • Maximum Drilling Diameter: 45 mm • Main Spindle Power: 7.5 kW • Main Spindle Motor: Water-cooled • Tool Holder: HSK F63 DIN 69893 • Feed Drive Motor Power: 4 kW • Feed Speed: 1,500–18,000 mm/min • Maximum Tool Weight: 5 kg • Maximum Tool Clamping Force: 10,000 N • Operating Voltage: 400 V ±5% • Supply Voltage: 3/N/PE, 400 V, 50 Hz • Frequency: 50 Hz • Total Connected Load: 33 kVA • Rated Power: 41 kW • Rated Current: 62 A • Connection Cross Section: 16 mm² • Control Voltage: 24 V • Control Current: 52 A Bjdpfx Aezi Avdegdodf • Compressed Air Pressure: 6–10 bar • Air Connection: 1/2" • Required Air Consumption: 28 m³/h • Dust Extraction Connection: Ø100–300 mm • Air Flow Ø100: 14 m³/min • Air Flow Ø140: 28 m³/min • Air Flow Ø160: 36 m³/min • Air Flow Ø180: 46 m³/min • Air Flow Ø200: 56 m³/min • Air Flow Ø280: 105 m³/min • Air Flow Ø300: 127 m³/min • Number of Dust Extraction Ports: 1 • Machine Condition: Disassembled but fully functional Optional Equipment, not included: • Vacuum block suction cups (aluminum) and sliding console • Two milling spindles for synchronous milling with integrated tool changers • Safety fence with associated safety mats • Control cabinet and operating unit • Waste conveyor belt for milled sections

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. handwheel HR420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) Bodpozkuirjfx Agdjdf Can be machined in 5 axes (90° free A-axis) in a single setup using a 300 mm long tool. Machine operating hours: approx. 83,000 h Total spindle hours: approx. 37,000 h Machine bed (can be installed flush or above ground!) Dimensions: 5,000 x 2,250 x 300 mm - manufactured from EN-GJL-250 9 T-slots according to DIN 650-28H12 with a spacing of 250 mm and 125 mm from the edge 2-axis milling head, inspected by the manufacturer! Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drive system for linear axes Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s2 Connection data Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Dimensions, weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL color 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area cover Condition of the machine The milling head has been freshly inspected by the machine manufacturer, thus partially overhauled and fully functional. Completely new machine bed from Stolle! The additional modules shown on the machine bed are not included in the scope of delivery. The extraction systems and ducts shown are also not included in the scope of delivery. The previous owner was an established Formula 1 team from Central Europe. The machine was always under a maintenance contract with the manufacturer. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: excellent (used), Year of construction: 2019, 8.54-Meter Schulte Pallet Racking, 4 Meters High 1 starter unit & 2 add-on units, each with 4 levels, accommodating 36 Euro pallets 3 beam levels, height-adjustable in 50 mm increments Frame bracing via bolted diagonal and horizontal struts Profiles in blue / supports and beams in pure orange (RAL 2004) Manufacturer: Schulte Lagertechnik Upright type: S610-M18 Total length: approx. 8540 mm Rack height: 4000 mm Rack depth: 1100 mm Bdedeznh Trjpfx Agdsf Clear bay width: 2700 mm Beam type: LNS-Duo 110 x 50 x ... Number of storage levels: 4 (incl. floor level) Number of bays: 3 Max. beam load: 2580 kg Max. bay load: 8200 kg Pallet spaces: 36 Scope of delivery: 04 x Schulte pallet rack uprights, 4000 x 1100 mm, blue 18 x Schulte pallet rack beams, 2700 x 110 x 50 mm, 2580 kg, orange (incl. locking pins) 04 x Pallet rack chipboard decking panels, 2690 x 980 x 38 mm 20 x Galvanized depth supports Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive, one-stop service: Assembly & Disassembly Whether for new installations, modifications, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racking (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Racking Inspections (compliant with DIN EN 15635) Safety is a legal requirement. We conduct the mandatory annual expert inspection (in accordance with DGUV Rule 108-007): - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Preparation of a legally compliant inspection report, including an inspection sticker. "A complete solution: We are happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), functionality: fully functional, Year of construction: 2019, Used container unit, dry, watertight, already disassembled. - Year of manufacture: 2019 - Consisting of 5 x 20-foot containers = approximately 75 m² Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.80 m Internal height: 2.50 m Insulation: Bdjdpfszn H Nrjx Agdjf Wall: 100 mm Floor: 100 mm Ceiling: 100 mm Equipment: - Entrance door - Double-leaf door - Reinforced floor - Mobile air conditioning unit - Plastic windows with insulating glass, some with tilt-and-turn function - Electric heaters - Continuous parapet - Sealing strips - Wall cladding - Ceiling cladding - Container clamps The PVC flooring is dirty and needs to be partially re-glued. Loading and transport can be arranged. Only serious and legitimate inquiries will be answered, including the following information: name, email address, and telephone number.

Condition: excellent (used), Leybold Type: Trivac D 40 B The TRIVAC B series consists of oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pumping chamber serves as a sealant, lubricant, and coolant. The pump housing is assembled from individual parts without sealing elements. These parts are connected with pins to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed up to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, forced-lubricated plain bearings Minimal air intake High leak tightness (4He-compatible) Technical data: Product: TRIVAC D 40 B Connection flange, suction side: DN 40 ISO-KF Connection flange, pressure side: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10⁻⁴ mbar Ultimate total pressure without gas ballast: < 2.0 x 10⁻³ mbar Ultimate total pressure with gas ballast: < 5.0 x 10⁻³ mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume Bodpfxozianws Agdjdf min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Mains connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection class: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, ONLY BEAMS for Stow pallet racking: Beam sizes: 2900*120 mm Bjdpfx Ajhryh Hsgdodf 3600*140 mm 1800*80 mm 3500*145 mm 2700*80 mm 1900*120 mm 4400*160 mm 3700*160 mm If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking, as well as accessories, and will be happy to assist you with your planning. Other accessories available include: Frame, corner, and end protectors, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Please request shipping costs by providing your postal code, location, and the desired quantity of items. Other service offerings: Planning, racking installation/disassembly, purchase/sale Changes and errors in technical data, information, and prices, as well as sales subject to prior sale!

Year of construction: 2024, operating hours: 10 h, condition: excellent (used), functionality: fully functional, load capacity: 3,000 kg, machine/vehicle number: 0000, Aluminum crossbeam ATV-Q with 4 swivel lifting hooks, adjustable - The lightweight H-shaped crossbeam made of aluminum has a load capacity of 3,000 [kg]. Type ATV-Q-3-3x3, brand Tiger Hebezeuge. The crossbeam has been used only a few times and a maximum of 500 kg has been lifted with it. It shows only minimal signs of wear. See photos. Purchased in June 2024. The new price is €6,100.00 plus 19% VAT and shipping costs (approx. €380). Bsdpfx Ajzn Raujgdsdf Selling because it is no longer needed. Please contact me if you have any questions. Description according to the manufacturer: Aluminum crossbeam with 4 swivel lifting hooks - H-shaped crossbeams made of aluminum. Product features: Type: ATV-Q-3-3x3 Load capacity: 3,000 [kg] Hook spacing: 420-3,000 [mm] Hook spacing, cross profile: 400-3,000 [mm] Aluminum load beam for crane operation Lightweight crane crossbeam in H-shape made of aluminum Suspension for single hooks, DIN 15401 With four adjustable safety lifting hooks (rotatable by 360° under load) With a quick-release system to quickly adjust the lifting hooks a) on the main profile in a grid of 50 mm b) on the cross profile in a grid of 50 mm All parts are made of either aluminum or polyamide (with the exception of the bolts and suspension hooks) The two cross profiles can be removed from the main profile Surface: plain Product description: Aluminum crossbeam ATV-Q with 4 swivel lifting hooks, adjustable - The lightweight H-shaped crossbeam made of aluminum. This aluminum crossbeam in H-shape consists of a main beam and 2 cross beams. The crane crossbeam can not only be adjusted in many ways but also easily disassembled. This simplifies transport and saves space if the crossbeam is not needed. The load-bearing devices have a type plate with manufacturer, load capacity, weight and type number, as well as a QR code with access to the EC declaration of conformity. Safety note: Note on the safe storage of crossbeams According to DGUV rule 109-017, chapter 7.5, load-bearing devices must be placed or laid down in such a way that they cannot tip over, fall or slide off.

Condition: repair required (used), Year of construction: 2000, We are offering this SAFED belt furnace, manufactured in 2000, which requires repair. Numerous spare parts are included. Manufacturer: Safed Model: 1 used continuous furnace Year of manufacture: 2000 Operating temperature hardening furnace: 870-930°C Gas power: 240 kW Max. gross batch weight: 400 kg/h Max. batch width: 600 mm Quenching method: Oil Soaking furnace Gas power: 215 kW Operating temperature: 170-650°C Max. batch weight: 400 kg/h Bdodpfsyr Atpex Agdof Washing machine Max. batch weight: 400 kg/h All prices are ex works Kehl, and the buyer is responsible for disassembly and all associated costs. VAT is not included in the prices. Subject to errors. Used equipment is sold without any warranty. We cannot be held liable for personal injury or property damage during disassembly by the buyer. Place of jurisdiction: Germany. All agreements are made in accordance with German law. Ownership of the material remains with the seller until full payment is received. If you have any questions or require further information, please do not hesitate to send us a message or call us.