Used Dispenser for sale (495)

Condition: new, color: grey, Year of construction: 2026, Container Description: Our offer includes a complete package with high quality and is therefore unbeatable. We source gas appliances exclusively from qualified manufacturers with high-quality products. The structure and the entire kitchen with its equipment are NEW! Container Specifications Availability: Immediate delivery Color: Anthracite Delivery included in the price, delivery to the curb. Construction made of isothermal aluminum-fiberglass laminate with excellent aesthetic appearance. Guarantees an optimal internal temperature in all seasons. Dimensions Internal length: 5,898 mm Internal width: 2,352 mm Internal headroom: 2,385 mm Two new containers are for sale: Container 1: Empty - Ideal for individual use or conversion The water system connection, fuse box, two serving hatches, and ceiling lighting are already installed (see last images in the image gallery). Price: 25,000.00 Euro net Warranty: 1 year warranty on structure and electrical system. This price applies to the standard equipment shown in the pictures. Additional costs will be incurred for modifications or additions. Container 2: Fully equipped with catering equipment - ready for immediate use, perfect for street food. Price with the equipment described below: 39,500.00 Euro net. Catering equipment; kitchen made of stainless steel Gas appliances Gas stove "Bertos" with 2 burners, dimensions (W x D x H) 300 x 600 x 290, power: 6.2 kW, made of stainless steel, G6F2B Gas grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas fryer "Bertos", 2 x 8 liter tank capacity, dimensions (W x D x H) 600 x 600 x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 3 x 11 liter propane gas cylinders Cooling options Undercounter refrigerator "Liebherr" Combination refrigerator Liebherr Water system Water system with water canisters, 30-liter filling capacity with fresh and wastewater canisters Two stainless steel sinks with faucet Hygiene package consisting of a folding towel dispenser and a soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color changing effect around the serving hatch with remote control Dodpfeztar Djx Apwekr Emergency light Additional equipment Serving area and work surface made of brushed stainless steel Two serving hatches Insulating wall at the cooking area (fireproof) Exhaust hood made of labyrinth filters Non-slip floor for catering Splash guard optional Entrance through a side door Generator cabinet Warranty: 1 year warranty on structure and kitchen. This price applies to the standard equipment shown in the pictures. Additional costs will be incurred for modifications or additions. We can, of course, also build this model differently. Delivery time up to 6 months. Do you need different equipment for this sales vehicle? Does your equipment require a higher payload or more serving hatches? You can determine many vehicle details yourself!

Condition: new, empty load weight: 1,700 kg, overall weight: 3,500 kg, color: grey, Year of construction: 2025, Equipment: hydraulics, A Contrailer is a perfect combination of a food truck and a container, offering you flexible usage options, ample space, and increased load capacity for the catering sector. You can use the Contrailer either as a stationary unit (like a container) or transport it flexibly to any location with a vehicle. Setting down the unit is easily accomplished via a hydraulic system. Our offer includes a comprehensive package of superior quality, making it unbeatable. All gas appliances are sourced exclusively from certified manufacturers renowned for high quality. The body structure and the entire kitchen, including equipment, are BRAND NEW! Color: Anthracite Body constructed from isothermal aluminum fiberglass laminate with an excellent aesthetic appearance. Ensures optimal interior temperature throughout all seasons. Body dimensions: Total length: 4,450 mm Total width: 2,400 mm Total height: 2,495 mm Vehicle Equipment - Gas Grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, stainless steel construction, model G6FL6B Dkjdsztarqjpfx Apwsr - Gas Fryer "Bertos", 2 x 8-liter tank capacity, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, stainless steel, with drain valve, model GL8+8B - Gas Cooker "Bertos" with 4 burners, dimensions (W x D x H) 600 x 600 x 290 mm, output: 12.4 kW, stainless steel construction, model G6F4B Cooling - Compact undercounter refrigerator "Liebherr" - Display fridge with glass front, suitable for beverages, "Klarstein" - Refrigerator with integrated chest freezer "Liebherr", 340-liter capacity Water System - Water system with canisters, 30-liter capacity with separate fresh and waste water tanks - Double stainless steel sink with faucet - Hygiene package including a foldable towel dispenser and soap dispenser - 10-liter hot water boiler - Pump Additional Features - Service counter and work surfaces made of brushed stainless steel - Insulated partition wall at the cooking area (fire-resistant) - Extractor hood with labyrinth filters - Non-slip flooring for gastronomy - Sneeze guard available as an option

Condition: new, machine/vehicle number: 6750, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, number of seats: 3, Vehicle Description Fully equipped new food truck with a brand new kitchen. We offer flexible hire-purchase and leasing options. Please contact us. The vehicle is new and the kitchen has been built with great attention to detail. It is our mission to convert new and used vehicles into food trucks in accordance with regulations. Today, we are proud to say that our years of expertise have convinced our customers of the quality of our work. Visit us and experience the quality of our vehicles for yourself! Body construction made from isothermal aluminum-fiberglass laminate with an excellent aesthetic appearance. Ensures optimal interior temperature throughout the year. Permissible gross weight: 3,500 kg, Driving license class: B Emissions standard: Euro 6 Environmental badge: 4 (Green) Parking sensors Summer tires Catering equipment, kitchen made from stainless steel Gas appliances: Gas fryer “Bertos”, 2 x 8-liter basins, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas stove “Bertos” with 4 burners, dimensions (W x D x H) 600 x 600 x 290 mm, output: 12.4 kW, made of stainless steel, G6F4B Gas griddle “Bertos”, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, G6FL6B Cooling options: Refrigerator with glass front, suitable for beverages Small under-counter refrigerator "Liebherr" Water system: Water installation with canisters, 30-liter capacity with fresh and waste water tanks Two stainless steel sinks with fittings Hygiene package with paper towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting: LED ceiling lighting LED ambient lighting with color effects around the sales hatch, remote-controlled Emergency light Additional equipment: Serving counter and work surfaces made of brushed stainless steel Fire-resistant insulation wall at the cooking area Extractor hood with labyrinth filters Slip-resistant gastronomy flooring Sneeze guard (optional) Dksdpjztardsfx Apwor Built-in insulated generator cabinet We take care of all required paperwork (TÜV inspection and certification) Warranty: One-year warranty on body and kitchen Manufacturer’s warranty from Renault This model can of course be customized! Need a shorter or longer version of this model? Need different equipment for this sales vehicle? Does your equipment require a higher payload or additional sales hatches? You can determine many vehicle features yourself!

Condition: new, machine/vehicle number: 0897, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, Vehicle Description Fully equipped new food truck with a brand new kitchen. We offer flexible hire-purchase and leasing options. Please contact us. The vehicle is new and the kitchen has been built with great attention to detail. It is our mission to convert new and used vehicles into food trucks in accordance with regulations. Today, we are proud to say that our years of expertise have convinced our customers of the quality of our work. Visit us and experience the quality of our vehicles for yourself! Body construction made from isothermal aluminum-fiberglass laminate with an excellent aesthetic appearance. Ensures optimal interior temperature throughout the year. Permissible gross weight: 3,500 kg, Driving license class: B Emissions standard: Euro 6 Environmental badge: 4 (Green) Parking sensors Summer tires Catering equipment, kitchen made from stainless steel Gas appliances: Gas fryer “Bertos”, 2 x 8-liter basins, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas stove “Bertos” with 4 burners, dimensions (W x D x H) 600 x 600 x 290 mm, output: 12.4 kW, made of stainless steel, G6F4B Gas griddle “Bertos”, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, G6FL6B Cooling options: Refrigerator with glass front, suitable for beverages Small under-counter refrigerator "Liebherr" Water system: Water installation with canisters, 30-liter capacity with fresh and waste water tanks Two stainless steel sinks with fittings Hygiene package with paper towel dispenser and soap dispenser Dedpfx Apoztaqyswskr 10-liter hot water boiler Pump Lighting: LED ceiling lighting LED ambient lighting with color effects around the sales hatch, remote-controlled Emergency light Additional equipment: Serving counter and work surfaces made of brushed stainless steel Fire-resistant insulation wall at the cooking area Extractor hood with labyrinth filters Slip-resistant gastronomy flooring Sneeze guard (optional) Built-in insulated generator cabinet We take care of all required paperwork (TÜV inspection and certification) Warranty: One-year warranty on body and kitchen Manufacturer’s warranty from Renault This model can of course be customized! Need a shorter or longer version of this model? Need different equipment for this sales vehicle? Does your equipment require a higher payload or additional sales hatches? You can determine many vehicle features yourself!

Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (incl. DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir preparation, incl. adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius cutting blade; flush cutting blade (incl. pneumatic extraction); cleaning station; 1 free space for a 2nd milling station or a slot cutting saw (slot cutting saw only if the cleaning station is removed); robust chain drive, ball-bearing mounted double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Min. workpiece length: 160 mm Dkjdpoznvqfsfx Apwor Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm 8 mm version K36, 1 unit, quick-change fitting for corner milling cutter K36, 1 unit, extra charge for multi-radius cutting blade (R2/R1) K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spray device, plate K36, 1 unit, cleaning agent spray device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius cutting blade K36, 1 unit, pneumatic 3-point adjustment K36, 1 unit, Airtronic K36, 1 unit, extension of the support in the infeed and outfeed by 440 mm each; 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support surface for improved workpiece handling by 450 mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Packaging surcharge, 1 unit Additional quick-change reservoir incl. level sensor Manufacturer: Hebrock Type: 36/14/1 Article No. H36/14/1, 1.0 unit Additional change motor for corner milling cutter K36 Manufacturer: Hebrock Type: 36/08/2 Article No. H36/08/2, 1.0 unit R1 Location: Supplier

Condition: excellent (used), functionality: fully functional, operating hours: 560 h, The Massivit 1800 is an industrial large-format 3D printer designed for producing full-scale prototypes, displays, molds, scenic elements, and large composite tooling. It uses Massivit's proprietary Gel Dispensing Printing (GDP) technology rather than conventional FDM or SLA processes. Fully functional, in production. Demo possible upon request. 560 hours printed only! Location: Europe Double printhead version. Price includes decommissioning and loading on truck. Installation and training available. Permanent software license Manufacturer Company: Massivit 3D Printing Technologies Model: Massivit 1800 Core Specifications Specification Value Printing Technology Gel Dispensing Printing (GDP) Build Volume (W×D×H) 1.17 × 1.50 × 1.80 m Dksdpfxjzcv S Hs Apwor Maximum Part Weight 150 kg Z-axis Productivity Up to 35 cm/hour Linear Print Speed Up to 300 mm/s Material Dimengel UV-curable photopolymer File Format STL Machine Footprint 3.1 × 2.2 × 2.8 m Machine Weight 2,500 kg Electrical Requirement 380–400 VAC, 3-phase, 32 A Power Consumption ~10 kW during printing Air Supply 6–8 bar compressed air Operating Temperature 16–30 °C Compliance CE For further technical and commercial information, please refer to enclosed brochure.

Condition: used, This listing is for Biotek Valve module Fluidic Component The unit is in full working condition and ready for immediate use This fluidic component is a robust unit designed to provide accurate and consistent fluid routing for microplate washing or dispensing applications. Manufactured by Biotek, this reliable module is an excellent addition to any modern facility utilizing automated liquid handling setups. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Dsdpfxozqf H Ij Apwskr Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2021, condition: used, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Dkodozc N H Dspfx Apwsr Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NM-FF2026, Equipment: CE marking, Frozen fish weighing dispenser integrated into the fish feeding, sorting, 10 kg weighing and packaging line. Designed for installation in the customer's premises, taking into account the dimensions and ceiling height. Multi-head dosing device MBP 14C2 EW 60. Number of heads: 14 pcs. Dsdpfxjv Dit Ns Apwskr Weighing type: weight sensors. Weighing accuracy: 0.1 – 1.5 gr. Pocket volume: 5 liters. Dosing in one cycle: max. 4000 gr. Pocket opening type: from two sides. Nominal speed: up to 180 cycles/min. Pocket drive: stepper motors. Air dehumidifier: above 0 degrees. Electricity AC 240V, 50 Hz, Consumption 1.0 kW; Equipment weight: 800 kg. Machine dimensions: 2600 x 2600 x 1450 mm (for clarification) Control: 12.1 ” touch-sensitive display. Number of programs: up to 99. Room temperature range: from 0 C to + 40 C; External vibration compensation: 4 built-in load sensors for external vibration compensation. Protection class: IP 66, condensation-resistant, completely washable Automatic zeroing: Yes. Self-diagnostics: Yes. Remote diagnostics: Yes. RCU cable. Conformity: CE. -Flow Pack type packaging machine PFM Zenith EW Servo. Equipment for forming pre-cut packages from a film roll. Packaging data: −Package width 100 - 320 mm. −Package length 80 - 400 mm. −Max. package volume 6 liters. −Max. roll width 700 mm. −Film roll diameter max. 350 mm. Mechanical speed: up to 90 cycles per minute. The actual speed will be specified after tests with real product and packaging material. THE BASIC SET OF THE MACHINE INCLUDES: The machine frame, electrical cabinet, melting jaws, vertical melter support made of stainless steel. Roll holder with centering cones. One forming tube made of stainless steel for pillow-type packaging (diameter optional). Photo sensor for printed film and encoder for determining the length of the package. Vacuum belts for film feeding. Machine version with a slope for product and packaging safety. Product holding mechanism before jaws. Packaging support. Vertical seam sealing bar with pneumatic drive. Machine functions are controlled via PLC Siemens. Photo sensor for working with printed film. Possibility to save up to 99 different programs. Machine control via touch sensitive panel 12.2". Machine self-diagnosis. Notes: The machine is designed to work with hot jaws MACHINE DIMENSIONS (base model): Height: 1600 mm. Width: 1280 mm. Depth: 2200 mm. Weight 550Kg. Air consumption: 350 NL/minute. Electricity consumption: 4 Kw. Connection: 400 V. 3 Ph. - 50 Hz. 2. Multifunctional line, in accordance with the requirements and premises of the customer. Designed for feeding fish from IFQ, sorting, accumulating in containers, as needed, weighing 10 kg, forming cardboard boxes and feeding tilted boxes to sealing and pallets. The line consists of: - c) Feed conveyor to weighing 10 kg - d) Reversible conveyor for feeding filled boxes to sealing - e) Reversible conveyor with control from scales with two weighing places - f) Roller, gravity, conveyor for feeding empty boxes to 10 kg weighing places - g) Roller conveyor for feeding empty boxes to the 1kg packing table - h) Work table for packing 1kg packages into boxes - i) Rotary table for accumulating 1kg packages - j) Product feed conveyor to the MFG - k) Conveyor for feeding products from the MFG to the packer - l) Conveyor for feeding 1kg packages to the Rotary table - m) carton former, automatic - n) carton sealer -p) Xray

Condition: used, functionality: fully functional, VIFESA KMV-1800 - Industrial Mixer/Dispenser Equipment in excellent condition, ready for operation! (see attached photos) Key features: Model: Vifesa KMV-1800 Dsdpfxezcwm Sj Apwokr Nominal capacity of 1800 liters Large-volume yellow hopper in excellent condition Robust white metal frame with chain-operated lifting system Complete motor and mechanical system Original VIFESA electrical panel Ideal for mixing concrete, mortars, chemicals, additives, feed, or other bulk materials Condition: Used, but very well maintained. Fully functional. Shows normal signs of use (dirt and work marks), but with no cracks or structural defects.

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2020, next inspection (TÜV): 01/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Walking Floor semi-trailer K100 92 m³ 10 mm Floor, New MOT (TÜV) General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross permitted weight: 36,000 kg 202003-0071956-r_order-configur? * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered walking floor semi-trailer * Axle version: fixed, fixed, fixed ----Dimensions * External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Coupling height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st–2nd axle: 1,310 mm * Axle spacing 2nd–3rd axle: 1,310 mm ----Axles & Running Gear * 3 x SAF 9 t Intradisc+ Integral CD off-road axles * All axles fixed * Disc brakes Ø 430 mm * 10-bolt wheel mount * Air suspension with standard control console (left in front of axles) * Lift axle, fully automatic via EBS * Including hill start assist (3x brakes) * Radio remote control for lift axle ----Tyres & Rims * Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Body * Closed sidewalls left and right * Sliding partition wall (min. ground clearance 100 mm) * Rear doors with external locking rods * One locking rod per door * Top rail made of steel, swings out left and right * Platform at front bulkhead * Ladder at front bulkhead, left and right * Standard roof bows Ø 60.3 mm (4 pcs) * Bow spacing: 3 x approx. 4,100 mm * Tarpaulin 680 g/m² (RAL 9006 white aluminium) * Tarpaulin supports, 3-position (4 pcs) * Lashing straps (4 pcs) ----Floor / Walking Floor * Cargofloor system CF-500 SL-C * Electric control * Corrugated aluminium floorboards 10 mm (21 boards) * Fixed front wall * Stainless steel plate at rear under floor ----Attachments * JOST landing legs with compensating device * Plastic toolbox, left in front of axles (1000 x 500 x 500 mm) * 30 L water tank with soap dispenser * Closed side underrun protection * Swinging mudflaps * Anti-spray mat on 3rd axle * Long ladder with extendable rear step and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting * 6 x round LED tail lights (3-chamber) * LED fog and reverse lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulations Dsdpfx Ajyrvt Aspwskr * LED work lights at rear (radio remote controlled) * LED work lights near landing legs (radio remote controlled) * LED LCG-2 switch unit ----Hydraulics / Connections * ISO-N and ISO-S connectors + 15-pin electrical socket * Knapen Trailers V1 radio remote control * Hydraulic connections centred on front wall (vertical) * Pressure line left, return right * Additional hydraulic connections at landing legs * Brake connections present * Acoustic reverse warning (manually adjustable) ----Paintwork * Body in RAL 7011 iron grey * Wheel hubs in RAL 2008 light red-orange * Chassis and underside unpainted If you have any further questions, I am at your disposal.

Condition: good (used), Year of construction: 2012, Lightly used mixing, dispensing, and adhesive application system with a gear pump in good condition: t-s-i mastermix gear basic – Mixing and dispensing system for 2-component silicone adhesives – Two-component gear pump dispensing system – Hose set, 2.5 m, 2-component dispensing gun – Siemens S7-200 control system – Overpressure/underpressure cut-off – Pot life monitoring with acoustic warning – 200-liter component A container – 20-liter component B container – Swivel arm extension 800 mm – Swivel arm height increase 300 mm – Hose set extension 1000 mm – Automatic dispensing when in the "parking" position – Year of manufacture 2012, rebuilt by T-S-I in 2016/17 – System was lightly used Dodpfx Apozq S Ifewskr – Sale from location Karlsruhe / Southern Germany – Inspection possible by arrangement

Year of construction: 2008, condition: good (used), Item: M-07196-Ishida Tray Sealer Ishida - Automatic High Speed Tray Sealer Serie QX-775 R Year of production 2008 Specification: Machine model QX775, Tray Sealer Suitable for 5 impression tool 40 mm gate Options vac gas/gas flushing Electrical requirements: 3 phase 415 V, 4500 VA Dsdeh Dbwijpfx Apwokr Pneumatic Supply: 8 bar, 650 nominal l/min Weight: 830 kg Incl. Tray dispenser & tool trolley

Condition: new, mileage: 1 km, power: 180 kW (244.73 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 4x4, wheelbase: 4,200 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: steel, total length: 5,700 mm, total width: 2,450 mm, total height: 2,200 mm, Year of construction: 2025, Equipment: air conditioning, crane, differential lock, electric window regulation, power assisted steering, - Autoradio - CD - Diesel - Power windows front - PTO - Side door - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat Dedsy Ruczepfx Apwekr - Radio/cassette player = Remarks = The Mercedes-Benz Atego 1725 A 4x4 Service Truck is an extremely reliable and versatile commercial vehicle, designed to perform in demanding conditions. This truck is suitable for use as a mobile workshop, maintenance vehicle or support vehicle in various difficult-to-reach areas. Key Elements: - ENGINE: Equipped with a powerful 6-cylinder engine delivering 245 hp (180 kW), the Atego 1725 A provides sufficient power for off-road operations and heavy duty work. - DRIVELINE : With permanent four-wheel drive, high ground clearance and robust suspension, this truck arrives on site regardless of the terrain. - OFF ROAD TIRES : With these off-road tires, the Atego 1725 can ensure that you arrive on location without any problems. Thanks to the 4x4 drivetrain, no terrain is too rough. Superstructure : Service Truck A service truck offers a fully equipped mobile workshop with tools such as: - Power supply / Lighting - 24v system connected to the vehicle battery. - 4 ceiling lights 230V (LED) - 2 ceiling lights 24V (LED) (connected to vehicle battery) - 2 sockets 230V / 16A - 2 sockets 400V / 16A and much more, ask our sales for more info! Lubricate / Pump equipment - 4 pneumatic oil pumps equipped with (4) 10M hoses, (4) digital meters on oil dispenser - 1 pneumatic waste oil pump equipped with (1) 10M hose (1) and oil dispenser - 1 pneumatic grease pump equipped with (1) 12M hose (1) grease dispenser - 1 electric water pump (Einhell) with (1) 10M hose and water dispenser - 3 units of ''Silver filler Breathers'' with mesh for water. Coolant, old oil tanks - High pressure washer Karcher (or similar) - Compressor ABAC 3PK 400V/230V with air spray, air hose 10M Tanks: - Water tank capacity 600L MAX. - Diesel tank capacity 1000L MAX. with 24V pump hose is 15M with digital meter for liters - Old oil tank capacity 900L MAX. Tools: - Power generator (Hyundai DHY12000XSET 11.4KvA 400V / 9kw 230V 30L 50Hz 72DB) - 1 portable headlamp – 5M - Barrelwrench type 1 and 2 - Extension cable - 25M - Vise / vice 100MM - Tool box filled 30+ parts - 2 tool chests with drawers, cabinet, and doors with lock. Other accessories: - Mud screens - Work lamp - First aid kit - Water tank 30L for washing hands - Anchor points for securing cargo - Fire extinguisher - Welding equipment 1 welding cable with holder 10M, welding helmet, leather gloves - 500KG electric winch 230V - manual jack The Mercedes-Benz Atego 1725 A 4x4 Service Truck is an excellent choice for professionals in: - Mining: Reliable transportation and support in harsh environments. - Oil and gas industry: Maintenance and repair in remote locations. - Agriculture: Efficient service in difficult areas. - Infrastructure projects: Support of construction and maintenance activities. - Humanitarian missions: deployability for relief efforts in remote or disaster areas. = More information = ...

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Dodpfx Apji Am U Djwjkr F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, empty load weight: 168 kg, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 10/20-4M HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 200 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 10/20-4M Power supply voltage 400V ~ 3 phase Discharge capacity (l/h): 500 - 1000 Working pressure (bar) 30 - 200 Max. Water heating temperature (°C) 80-155 Connection power (kW) 7.8 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 168 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M Dkodezry Ngepfx Apwjr NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 178 kg, input voltage: 400 V, temperature: 155 °C, KARCHER HDS 12/18-4SX HOT WATER WASHER BUILT-IN HOSE REEL The device features new accessories, including a German R+M gun, stainless steel lance, steel-braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 12/18-4SX Power supply voltage 400V ~ 3 phases Pumping capacity (l/h) 600 - 1200 Operating pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 8.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 20 Weight (kg) 178 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance Dsdszrw A Depfx Apwokr NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - unlimited time Operation: Two built-in chemical tanks allow for dispensing cleaning fluid directly through the machine. A clearly laid-out and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. An exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: new, PRECISION CONTINUOUS FLOW (PCF) MEASURING AND DISPENSING SYSTEMS - Brand: Graco / Ref: PF2310 - 16-style 100-240 VAC cart-mounted PCF system with putty regulator, high-resolution meter, and DeviceNet user interface - International Shipping Dkodpfev Tmfzjx Apwsr - 1-Year Warranty

Condition: used, Year of construction: 2026, Overview This Ferrero AV 9/12/1VA automatic triblock, built in 2026, is designed for filling vegetable edible oil into Marasca-type glass bottles. The block combines a 9-clamp air rinsing station, a 12-valve high-vacuum filling station and an AROL EAGLE VA-IES single-head capping station for ROPP 31.5 x 24 mm aluminum screw caps in one compact AISI 304 stainless steel machine with a nominal output of 2,000 bottles/hour (750 ml). The machine is new and unused. Format tooling for four Marasca sizes (250 / 500 / 750 / 1,000 ml), nitrogen injection before capping, a 7-inch Siemens SIMATIC HMI touchscreen in English and remote diagnostics via Ethernet are included - ready for immediate use. Please note: an optional mechanical caps elevator is available on request; it is not included in the sale price. Technical data - Manufacturer: Ferrero (Italy) - Model: AV 9/12/1VA - Year of manufacture: 2026 - Machine type: rinser - filler - capper triblock for glass bottles - Product: vegetable edible oil, ambient filling temperature - Rinsing: 9-clamp air rinsing turret - Filling: 12-valve high-vacuum filling turret - Capping: AROL EAGLE VA-IES single head, ROPP 31.5 x 24 mm aluminum caps - Capacity: 2,000 bottles/hour nominal (750 ml) - Bottle formats: Marasca 250 / 500 / 750 / 1,000 ml (tooling included) - Bottle diameter range: 55 - 110 mm; height range: 180 - 350 mm - Control: 7-inch Siemens SIMATIC HMI touchscreen (English) - Electrical supply: 400 V three-phase, 50 Hz; 8 kW installed power - Compressed air: approx. 435 Nl/min at 6 bar - Construction: AISI 304 stainless steel; CE marking Equipment Dodszkkp Iepfx Apwjkr - Air rinsing station with AISI 304 grippers, EPDM pads and maintenance-free TWIST rotation - High-vacuum filling station in AISI 304 and food-grade materials, steam or chemical sterilizable - Polished AISI 304 product tank with level indicator, height adjustment and tool-free lid - AROL capping station with vibrating cap dispenser, cap level detector and missing-cap detection - Worm screws, star wheels and conveyors for Marasca formats - Nitrogen injection before capping (gas supply by the customer) - Photocells at inlet and outlet, remote diagnostics via Ethernet - Full AISI 304 safety enclosure with LEXAN inspection doors and safety microswitches Condition New - built in 2026. The machine can be viewed and tested in operation on request. Availability Immediately available. Location: Italy.

Condition: excellent (used), Year of construction: 2006, load capacity: 240 kg, arm reach: 2,800 mm, controller manufacturer: KUKA, controller model: KRC2 ed05, The KR360 is designed for a rated payload of 360 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR360 L240-2 (MORE option is also available) Condition: Used & Tested Dkjdpfx Apjw H Ny Howsr Year: 2006 (More options are also available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: used, functionality: fully functional, Year of construction: 2021, laser hours: 10,941 h, laser power: 6,000 W, total length: 11,115 mm, total width: 3,465 mm, total height: 2,840 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, nozzle changer, Laser cutting system with Mitsubishi Electric 6kW fiber laser source Year of manufacture: 2021. Operating hours of the laser as of 08/2026: 10,941 Table size, X-axis (mm): 3,100 - Y-axis (mm): 1,565 including standard accessories and the following options: - Cooling unit Haosch MCWL-120DTR. 12 kW cooling capacity - Automatic pallet changer - Sideros CaCo3 (calcium carbonate) dispenser for aluminum cutting - Automatic nozzle changer with 21 positions - Drawer for small parts and dross - Automation interface set Dsdpozqu Dcefx Apwjkr - Extraction system - Processing head "Zoom-Head" for stepless, automatic adjustment of beam shape and diameter. High-tech for permanent maximum laser power, cutting quality and process stability! - Mitsubishi Electric fiber laser source, integrated into the machine frame - CNC control "D-CUBES" with 19" multi-touchscreen display - Safety light barriers for safe operation of the pallet changer - Rapid traverse speed 170 m/min (simultaneous) - High Peak Piercing for fast piercing of thick structural steel - F-CUT for maximum performance in thin sheet metal - Optimal access via sliding door with an opening of 1,830 mm and additional pivoting door with an opening of 800 mm - Signal light with 5 lights to indicate the remaining time until the end of the process - Narrow gap cutting: Leads to a drastic reduction in nitrogen cutting gas consumption of up to 30%. - ECO mode: Saves up to 70% of energy costs in standby mode through automatic, step-by-step switching to standby mode. - All important CNC/PLC components from Mitsubishi Electric: For maximum reliability and process stability. Significant reduction in maintenance costs. - MEL'S AR Augmented Reality Technology: Automatic generation of a virtual top view of the remaining sheet metal in the machine. Placement and cutting of parts via drag and drop. Workpiece dimensions (mm): 3050×1525×t25 Pallet weight (kg): 950 Working height cutting table (mm): 890 X-axis (mm): 3,100 Y-axis (mm): 1,565 Z-axis (mm): 120 Accuracy: X-axis (mm): 0.05/500 Z-axis (mm): 0.1/100 Repeatability XY-axis: ±0.01 Dimensions (width × depth × height mm): 11,115×3,465×2,840 Weight (kg): Machining system approx. 7,000 kg Pallet changer approx. 2,400 kg Dismantling and loading are to be carried out by the buyer. We can establish contact with the manufacturer ASTES4 – Group Company of Mitsubishi Electric. Sale without warranty or return, ex location. An inspection during ongoing operation is possible by arrangement.

Condition: good (used), Year of construction: 2000, GRUNWALD HITTPAC AKH-019R/! Item: GRUNWALD Hittpac AKH-019R/1 Grunwald-Cup Filling Machine various, margarine, sous, butter, cheese etc.. Dedjp R R Dwopfx Apwjkr Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2000 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine, and operator panel. Machine has polycarbonate glass safety guards. CEE machine, incl. documentation Stationed: Denmark

Condition: used, Der Schrägrollentisch dient zur Überbrückung von Höhenunterschieden und Maschinenzwischenräumen. Außerdem benutzen Sie den Schrägrollentisch als Basisstation für den Cardtipper (mit GWG), den Tapesspender (mit GWG), die OUE-Einrichtung oder zum Gummieren. The inclined roller table is used to bridge height differences and gaps between machines. You can also use the inclined roller table as a base station for the card tipper (with GWG), the tape dispenser (with GWG), the OUE device or for gumming. Schrägrollentisch / Inclined Roller Table GUK RT 46 Baujahr / Year 1994 - Serial-No. 34088 fahrbar und höhenverstellbar / mobile and height adjustable Dodpfxexnz Tlj Apwekr Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Dedpfx Aszma E Dspwskr Six robust steel framed de-reeling stands – on wheels - are included, A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Automatic FROMM PM100002 Industrial Strapping Machine – Year 2022 – PET Strap – Automatic Wooden Slat Insertion System FROMM Packaging Automation industrial automatic strapping machine, model PM100002, manufactured in 2022 and designed for integration into an automated production and packaging line. The machine is particularly suitable for the automatic strapping of bundles, profiles, long products and industrial packages. Identification details Manufacturer: FROMM Packaging Automation S.r.l. Model: PM100002 Year of manufacture: 2022 Project number: 2110304 Serial number: 48.100002.057 Original delivery date: 19 September 2022 Machine configuration FROMM MH550 side-mounted strapping head KB4 strap dispenser Lower side magazine for wooden slats Automatic slat lifting system Automatic magazine movement Strapping arch Pneumatic system Electrical cabinet and control system Prepared for integration and communication with an automated production line Technical specifications Strap type: PET/plastic strap, 16 × 0.8 mm Strap feeding speed: 5.3 m/s Strap recovery speed: 5.3 m/s Adjustable tensioning force: 0.5–3.5 kN Final tensioning speed: 105 mm/s Power supply: 400 V – 50 Hz Maximum installed power: 3.8 kW Maximum current: 9.8 A Minimum compressed-air pressure: 6 bar The FROMM MH550 is a heavy-duty industrial strapping head designed for demanding applications, with a maximum tensioning force of approximately 3,500 N and friction-weld strap sealing. Documentation included. Only 108.000 cycles The machine is supplied with extensive original FROMM documentation, including: Complete instruction manual Electrical diagrams Pneumatic diagrams Spare-parts lists MH550 strapping-head manual KB4 dispenser manual Dksdpozq Df Njfx Apwor The equipment was originally supplied as partly completed machinery intended for integration into a complete production line. The relevant Declaration of Incorporation is available.