Used Drinks for sale (161)

Year of construction: 2024, condition: not inspected (used), machine/vehicle number: S-D12MM, 1. Drinking Straw Applicator, Manufacturer: unknown (China) Type: SXTG-1B, Serial No.: S-D12MM, Year of manufacture: 2024, Connection power: 3.5 kW, LED screen, accessories. Note: The system has been dismantled and could not be tested for functionality. Location: 48653 Coesfeld Category: Technical equipment Fsdpfx Amozg Uk Ue Eogi

Condition: used, Professional bottling monoblock from the renowned manufacturer STORK, designed for filling alcohol (vodka, liqueurs, and other still beverages) into glass bottles with aluminum ROPP closures. Technical data: Manufacturer: STORK Year of manufacture: 1991 Model: HVS 32/8 Machine type: Monoblock (filling + capping) Capacity: approx. 8,000 bottles/h Filler: 32 valves Fgodpfx Ajyxv Nljm Eji Capper: 8 ROPP heads (aluminum, e.g., 28 mm) Technical condition: Used machine, condition as shown in photos, serviced and operational up to the end of production.

Condition: used, functionality: fully functional, machine/vehicle number: WDB4371251W199327, mileage: 318,533 km, power: 177 kW (240.65 HP), first registration: 07/2002, fuel type: diesel, empty load weight: 7,300 kg, overall weight: 7,500 kg, tire size: 395/85 R 20, axle configuration: 4x4, brakes: engine braking, color: white, gearing type: mechanical, number of seats: 3, total length: 7,170 mm, total width: 2,410 mm, total height: 3,500 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 4,400 kg, Year of construction: 2001, operating hours: 4,765 h, Equipment: ABS, parking air conditioner, Unimog U1550L Expedition Vehicle First registration: 07/04/2002 Mileage: ≥ 318,000 km Operating hours: ≥ 4,700 h Total weight: 7,500-8,500 kg depending on load Engine: 176kW / 240 hp, Euro 2 Tires: 395/85 R 20 - Michelin Asking price: €139,800 Special equipment Unimog: A27 Double sealing of wheel hub, for use in muddy conditions A30 Tire pressure control system A31 Wheel-side, wheelbase-dependent parts for tire control B02 ABS B28 Mechanical quick-release device for spring storage cylinders C22 STABILIZER SEAL FRONT AND REAR C34 Anti-slip coating on bumpers D65 Mounting parts for external superstructures E35 Circuit breaker instead of fuse F06 Higher cab roof (by 120mm) F44 ADDITIONAL VENTILATION F50 SOUND AND HEAT INSULATION FOR CAB G22 Auxiliary gearbox with off-road gear G50 Transmission oil cooler G73 SHIFTING DAMPER (SHIFT LEVER - TRANSMISSION) H02 Single-circuit hydraulic system H11 HYDRAULIC SYSTEM 1-CELL H71 HYDR. PLUG-IN CONNECTION FRONT 2-WAY, CELL 1 J24 Tachograph, 2 drivers, outside EU J29 Speed-dependent engine speed compensation (measurement result / warning sign) L02 Outline lights to the front, white L18 Fog lights, halogen, suitable for wading L25 Rear fog light L30 Stone guard grille for headlights L30 Headlight stone guard L35 Headlight beam adjustment L41 ADDITIONAL TURN SIGNALS L71 Side marker lights with integrated reflectors M02 EURO II ENGINE M03 Increased engine power M31 AIR COMPRESSOR WITH HIGHER OUTPUT M53 Fuel preheating M78 Engine number stamping M86 PULLEY AND VIBRATION DAMPER WITH COMBINATION RING M91 ELIMINATION OF START PILOT R27 Disc wheels 11x20 super S21 Three-point automatic safety belts S26 Windshield electrically heated, laminated glass S26 Electrically heated windshield, laminated glass S39 Power windows (left and right) S46 2 Outside rearview mirrors, heated, electrically adjustable S50 First-aid kit S82 Wide-angle mirror S83 Ramp mirror X18 Increased load capacity level UNICAT Expedition Mobile Superstructure: - Pneumatically sprung Recaro seats, adjustable, heated and ventilated - Robust GRP box body, wall thickness approx. 60–100 mm, waterproof and dustproof; designed for temperatures from -40 °C to +40 °C - Four-chamber fuel tank system with a total of 560 liters of diesel - Solar system on the roof and extensive on-board electrical system with a central control panel - 310 l fresh water tank, 80 l waste water tank, 22 l hot water boiler via heat exchanger and drinking water filter system - Kitchen with refrigerator, freezer, sink, hot and cold water, three-burner propane stove, oven and storage compartments - Sleeping area with a double bed, cabinets, mirror, reading light and storage space - Bench seat, can be converted into an additional sleeping space for a third person - Bathroom with porcelain toilet and flushing, washbasin, mirror cabinet and shower - Outside shower and outside water connection - Awning - Rear bicycle carrier, roof rack with spare wheel - Additional front headlights with protective grille - Winch at the front and rear - Ball hitch K50 Offer subject to change. Errors, changes and prior sale are reserved. All information without guarantee. Our general terms and conditions apply. Location: Peter Meineke GmbH Becklinger Straße 17 29683 Fallingbostel Fgodpsz S Ni Ijfx Am Esi Viewings and/or test drives only by prior appointment. Please coordinate by telephone before arriving, as the vehicle/device may not be at the specified location. Contact: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Condition: good (used), functionality: fully functional, machine/vehicle number: et50, tank capacity: 50,000 l, underground storage tank for firefighting water, rainwater storage Fedpfecydt Usx Am Eogi

Year of construction: 1996, condition: good (used), Offer: Drinking water treatment plant Water treatment plant 120 cubic meters/hour Year of manufacture: 1996 Fully functional Housed in a 6m container Control system and pumps included. Previously used to supply a container village. Fgjdpfxohr D Hne Am Eoi

Condition: used, Year of construction: 1999, operating hours: 500 h, machine/vehicle number: LC392, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Fjdpfxovgud Se Am Esgi Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line.

Condition: used, Year of construction: 1996, Monobloc filling machine from the renowned manufacturer Krones – model VHK 032 / SV 08. This machine is designed for filling alcoholic beverages (vodka, liqueurs, still drinks) into glass bottles with aluminum ROPP closures. Technical data: Fgsdeyxv Ihspfx Am Eoi Manufacturer: Krones (Germany) Year of production: 1996 Model: VHK 032 / SV 08 Machine type: monobloc (filling + capping) Output: approx. 10,000 bottles/h Filler: 32 valves (gravity system) Capper: 8 ROPP heads (aluminum, e.g. 28 mm) Technical condition: used machine, condition as shown in the photos, serviced and fully operational until end of production.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: et50-neu-löwa, tank capacity: 50,000 l, this underground storage tank can be used to hold non-drinking water for the fire department or to retain rainwater to water for instance your sports ground Fgjdpfx Aod Tmaqom Eji

Condition: excellent (used), Year of construction: 2023, operating hours: 2,000 h, functionality: fully functional, Equipment: compressor, documentation/manual, Available immediately due to change in business direction. A complete, fully operational beverage production system currently used for the commercial manufacture of premium kombucha. The plant is equally suitable for the production of soft drinks, functional beverages, botanical drinks, syrups, flavoured waters, iced teas and other non-carbonated beverages. Manufactured from food-grade 304 stainless steel and certified to UKCA, CE and TÜV SÜD standards. Located in Ireland. Plant Specification • 4 × 4,000L Jacketed Fermentation/Process Vessels • 2 × 2,000L Mixing/Kettle Vessels with Whirlpool Mixing • 4,000L Cold Water Tank • 4,000L Glycol Tank • Plate Heat Exchanger • Siemens PLC Control System • Complete Glycol Chilling System • Pumps and Pipework throughout • Stainless Steel Process Pipework • 2 × 200L CIP Units • Fully integrated valves and sanitary fittings • Temperature controlled throughout production. Metered Pump Capabilities Suitable for production of: • Kombucha • Functional beverages • Soft drinks • Flavoured waters • Botanical drinks • Tea beverages • Juice blends • Syrups • Beverage concentrates • RTD drinks The integrated whirlpool system allows efficient ingredient incorporation and mixing. Condition • Fully operational • Currently in production • Well maintained • Excellent condition • Available for inspection under power Certification Fgodpfx Amjzp Hkxo Esi • CE Certified • UKCA Certified • TÜV SÜD Certified • Food Grade 304 Stainless Steel Location Ireland Can assist with dismantling and loading. Price POA / Offers Invited Alternatively willing to discuss sale of complete turnkey beverage manufacturing facility. Photos and videos available upon request.

Condition: excellent (used), functionality: fully functional, empty load weight: 11,590 kg, maximum load weight: 25,410 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 10/2007, total length: 13,400 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 R22,5, tire condition: 80 %, color: silver, trailer brake: trailer braked, Year of construction: 2007, operating hours: 3,000 h, Equipment: ABS, tail-lift, MGC.pl offers for sale a specialized Gray & Adams GADD3T/4 livestock trailer from 2007. The two-level design, loading platform, fans, and lighting create a practical solution for transport companies, breeders, and farms involved in the transport of live animals. The trailer has been refurbished. We can arrange transport to the buyer; details and costs will be determined individually. A significant advantage of the trailer is the suspension system from the renowned TRIDEC brand, which belongs to the JOST group. This manufacturer's solutions are used in demanding specialized transport applications – including trailers for transporting glass and two-level designs. This is advanced technology valued for its well-thought-out design, reliability, and ease of maintenance. TRIDEC suspensions allow for efficient use of the trailer's space, which is particularly important with two transport levels. High ride comfort, a very low and flat floor, excellent stability, and reduced tire wear. OFFER FOR TRANSPORT AND BREEDING The trailer is an excellent option for companies involved in animal transport, livestock farms, and companies purchasing cattle, calves, pigs, and sheep. Weights: GVWR: 37000 kg Tare weight: 11590 kg Payload: 25410 kg TRAILER FOR TRANSPORTING VARIOUS SPECIES OF LIVESTOCK: • cattle – cows, bulls, and heifers, • calves, • swine – pigs, sows, fattening pigs, and piglets, • sheep, rams, and lambs, • goats, bucks, and kids, • horses and ponies, • donkeys and mules, • alpacas and llamas. The design configuration, space height, and division into sections should be adapted to the species, size, and number of animals being transported. The use of two levels depends on the required height for a given transport. Inside the trailer are water troughs connected to a complete water supply system, allowing animals to drink during transport and stops. This is an important feature when transporting livestock, especially on longer routes. The type of water troughs and the method of operation should be adapted to the species of animals being transported. • Water troughs inside the trailer • Complete water supply system for the troughs DATA AND EQUIPMENT • Brand: Gray & Adams • Model: GADD3T/4 • Year of manufacture: 2007 • Type: livestock trailer • Number of axles: 3 • Number of transport levels: 2 • TRIDEC suspension • Remote-controlled loading platform • Fans • Interior lighting • Refurbished trailer TWO LEVELS, MORE POSSIBILITIES FOR ORGANIZING TRANSPORT The two-level design allows you to use the trailer's space appropriately for the type of animals being transported. This is a practical solution, especially for transporting smaller animals, provided the required space is maintained on each level. LOADING PLATFORM The platform facilitates the organization of loading and unloading and the handling of the trailer at the point of collection and delivery of the animals. FANS AND LIGHTING Fgsdpfsz R Utwsx Am Eei The fans assist with air exchange inside the trailer. The lighting makes it easier to monitor the interior and perform operations during loading and unloading in low visibility. The stated price is net and applies to export and businesses. A significant discount is possible for individual customers.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: AC, input voltage: 400 V, year of last overhaul: 2025, input frequency: 50 Hz, Equipment: documentation/manual, Manufactured by Eurostar Italy - one of the leading filling manufacturers Designed for filling Apple Cider, Beer, CSD and still drinks Triblock -rinser - filler - capper 2,000 BPH at 500ml bottles 3,000 BPH at 330ml bottles Isobaric Counterpressure Filling, designed for cider, beer, and other still & sparkling beverages Double Pre-Evacuation with Vacuum Pump, ensuring minimal oxygen pickup for superior product quality 316 Stainless Steel contact parts for superior hygiene and durability Pneumatic Bottle Lifters - overhauled 2025 Twin-channel rinser with final blow-off - overhauled 2025 Crown Cap (26mm caps) Capper Bypass - to feed to other cappers Touch Screen Control Panel for easy operation and monitoring Siemens PLC System, providing precise process automation and flexibility Variable speed control via inverter drive CIP Cups, Cleaning fluid can be recycled Fjdpfxox A U Urs Am Esgi Change Parts Included for 250ml, 330ml, 500ml, and 750ml glass bottles Heavy-duty stainless steel frame CE-compliant safety Includes all manuals Spare Parts package Spare Fill tubes - new for adaptation to any bottle fill height Spare filling valve seals etc. Can be loaded to buyer's transport

Condition: used, machine/vehicle number: LC594, Used Sidel Alsim PET bottling line for carbonated water and drinks - 14.000 bphTechnical Specifications & Performance DataThis complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations.Production speed: 13,000–14,000 bottles per hourContainers: PET bottles, neck finish 28 1881Blow molder: Sidel SBO10, 10 cavities, neck finish: 28 1881Preform handling: Sidel EBH 2050 preform hopperAir conveyor: Sidel-AlsimRinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10KRinser: 48 clamps, 1 water treatmentFiller: 60 isobaric valvesCapper: 10 headsPremix/Mixer: Sidel-Alsim, 30 m³/h outputBottle dryer: ACILabeling machine: Krones Contiroll, rotary, 15 dishes, PET wrap-around, roll-fedShrink wrapper: Acmi Fenix, film-only configurationHandle applicator: Smipack HA 35-50-70Palletizer: Alsim Valiant 1I 1P, fully automatic, push-typePallet wrapper: PM Pragometal OBS Rotomatic StandardAdvanced Automation & Control SystemsThe line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments.Production Line Integration CapabilitiesDesigned for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish.Machine Condition & Maintenance HistoryThis second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production.Operational Performance & VersatilityOptimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET w... Fgodpfx Aeydn A Hem Esi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, EXTRUSION HEAD G+G 125 PE-PP PIPE HEAD + COLOR STRIPE Last application: PE pipes for drinking water with color stripe Fgsdpo Ad Nvwjfx Am Eei System: WENDELVERTEILER Year of manufacture: 2015 Max. diameter: 125 mm Min. diameter: 20 mm Max. output: 600 kg/h, depending on wall thickness and diameter Condition: Very good condition, ready for operation The pipe head is my property. Location: D-26345 Bockhorn-Grabstede, Germany.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: QuickTOCultra, Manufacturer: LAR Type: QuickTOCultra Description: TOC analyzer Technical specifications: Measurement parameters: TOC (Total Organic Carbon), DOC, TIC, TC Fgjdpfxjv N U Tls Am Eji Measurement principle: High-temperature combustion (HTC) at 1,200°C – no wet chemical reagents required Measurement ranges: 0.1 ppb to 20,000 ppm (depending on configuration) Complies with standards: EN 1484, ISO 8245, EPA 415.3 Applications: Drinking water, process water, wastewater, ultrapure water (USP/Ph.Eur.), pharmaceuticals, chemicals Sampling: continuous online operation Interfaces: 4–20 mA output, RS-232, Modbus (depending on configuration) Power supply: 230 V AC, 50/60 Hz

Condition: used, Year of construction: 2004, machine/vehicle number: LC277, Technical Specifications & Performance Data Year 2004 complete PET line, 6000 bottles/hour, isobaric filling. This used configuration from BAT, Kosme, M.A.S is set up for soft drinks and remains in storage. As a compact piece of soft drinks bottling machinery, it covers blow molding through end-of-line packaging. Bottle Formats: 1.5 L, 2 L, 1 L Container Types: PET Product Types: Soft Drinks Speed: 6000 bph Filling: Isobaric (Fill type: 5) Production Year: 2004 Fgjdpfx Aevguyaem Eji Current Status: In Storage Line Composition Blow Molding Machine: Kosme KSB 4 (2004) Premix: M.A.S Mixer (2004) Filling Monoblock: M.A.S 32/32/8 (1999) Labeling Machine: BAT EBI 07 (2006) Shrink Wrapper: BAT 12 packages/min (2005) Advanced Automation & Control Systems Integrated controls coordinate blow molding, premix, isobaric filling/capping, labeling, and shrink wrapping for stable throughput at 6000 bph. Automation supports precise fill control and consistent handling across the listed PET formats. Manuals are available to assist setup and troubleshooting. Electrical configuration suits standard industrial supply environments. Production Line Integration Capabilities The line is engineered for straightforward integration into existing utilities and conveyors. Format changes between 1.5 L, 2 L, 1 L are supported, enabling quick PET size switches while maintaining carbonated-beverage performance parameters. Interfaces between blow molder, premix, and the 32/32/8 monoblock streamline upstream and downstream connections. Machine Condition & Maintenance History The equipment is currently stored and prepared for redeployment. As a second-hand system, it shows a solid operating background; regular upkeep records support readiness with appropriate commissioning and maintenance. Operational Performance & Versatility Configured for soft drinks, the isobaric setup maintains product carbonation and fill accuracy across the specified PET formats. This used soft drinks bottling machinery provides consistent performance from container manufacture to final packaging within the stated speed class. Installation Requirements & Site Preparation Allocate sufficient footprint for blow molding, processing, filling, labeling, and packaging sections. Utility tie-ins (air, power, water, CO₂ where applicable) are arranged for rapid connection to minimize commissioning time. Safety Standards & Compliance Certification Machine guarding and safety interlocks support operator protection and hygienic handling in beverage applications. Protections are in place for routine operation and maintenance access.

Condition: new, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 6 bar, total height: 1,500 mm, total width: 700 mm, total length: 1,600 mm, Equipment: documentation/manual, For sale is a system that is still in its original packaging and located in the warehouse. The system has never been put into operation. Only the originally installed Grundfos pump was removed and replaced with a new replacement pump. Otherwise, the overall condition of the system corresponds to its original delivery condition. The system includes: Water softening system Pre-filter Ultrafiltration system with a downstream reverse osmosis system Activated carbon filter UV lamp All installed components and wear parts, such as filter cartridges, filter inserts, replacement UV lamp, etc., are included as spare parts. The system will be packaged and prepared for transport on four Euro pallets and one larger disposable pallet. The original purchase price was €47,788.47 net. Use of UF membranes for the filtration of viruses, bacteria, and cysts. Important minerals such as calcium and magnesium are retained after UF filtration and do not need to be added back using complex and expensive technology. - Health centers and dental practices, where people are exposed to particularly high risks of infection from waterborne pathogens. - Hotels and restaurants to provide high-quality and safe drinking water for consumption, food preparation, showering, and washing. Fgjdpfx Aszbib Sem Eji - Legionella prevention in showers in public buildings. - Complete drinking water treatment in the household sector to improve drinking water quality for consumption, food preparation, showering, and washing. - Well water treatment

Condition: used, Year of construction: 2015, Overview Complete glass bottle line for still soft drinks and juices, built around a Krones Modulfill filler with Variojet rinser from 2015 and rated at 13,000 bottles per hour on 1 l and 22,000 bottles per hour on 0.25 l. The line runs non-returnable glass: depalletizing, rinsing, hot or cold filling, a White Cap twist-off capping machine behind the filler, hot-fill pasteurization, cooling, full bottle inspection, labelling on a Krones Prontomatic and a Langguth labeller, sleeving, tray and carton packing, incrating and palletizing, with buffer table. Two cappers are part of the line. The filler runs hot fill and can also fill cold, which widens the range of products the line can handle. There is no carbonator, so the line fills still (non-carbonated) products only. Technical data Fgjdpo Agpk Aefx Am Eji - Products: still soft drinks, juices - Filling: hot fill or cold fill, no carbonation - Containers: non-returnable glass bottles 0.25 l - 1 l - Line output: 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l - Years of manufacture: 1987 - 2016 Scope of Delivery Type | Manufacturer | Model | Description | Year - Glass depalletizer | Legendre | 16,000 bottles/h | 1999 - Rinser | Krones | VARIOJET | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Filler | Krones | MODULFILL | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Twist-off capping machine | White Cap | closure diameters 38 - 53 mm, arranged behind the filler - Bottle inverter | Polyketting | 12,000 bottles/h | 2004 - Hot-fill pasteurizer | APV | 15,000 l/h | 2005 - Bottle cooler | SEN | 1987 - Full bottle inspector | Heuft | SPECTRUM TX | 22,000 bottles/h - Labeller | Krones | PRONTOMATIC | 15,000 bottles/h | 2006 - Labeller | Langguth | 13,200 bottles/h | 2004 - Sleever | Sleeve Technology | 16,000 bottles/h | 2016 - Buffer table | Krones | 2006 - Tray packer | SMI | 16,000 bottles/h | 1996 - Incrater | Stork | 16,000 bottles/h | 1996 - Carton erector | Kettner | KAF | 12,000 bottles/h | 1999 - Carton closer | Kettner | HDV | 12,000 bottles/h | 1999 - Palletizer | Kettner | PRESSANT UNIVERSAL | 17,000 bottles/h | 1996 Condition Used, still installed. The line produces one last time from 1 to 20 November 2026. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: used, functionality: fully functional, maximum load weight: 13,200 kg, overall weight: 20,000 kg, first registration: 09/1999, next inspection (TÜV): 06/2026, loading space length: 7,150 mm, loading space width: 2,250 mm, loading space height: 2,700 mm, total length: 9,260 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 285/70 R 19.5, tire condition: 80 %, wheelbase: 4,950 mm, color: white, Year of construction: 2009, Equipment: tail-lift, MICHIELETTO RM 20 CPB TRAILER; 3-LEVEL VENTILATED LIVESTOCK TRANSPORT VAN WITH ADJUSTABLE FLOORS AND ROOF – FRONT AND REAR RAMPS – VENTILATION SYSTEM – 300 L WATER TANK FOR DRINKING – HYDRAULIC SYSTEM OPERATED BY REMOTE CONTROL – FULL FLAT FLOORING FOR TRANSPORT OF CATTLE, SHEEP, AND PIGS. Fsdoxwy Ndspfx Am Eogi INSPECTED VALID UNTIL 06/2026, READY TO WORK. ALL VEHICLES FOR SALE CAN BE INSPECTED AND CHECKED, GIVING THE CUSTOMER THE CHOICE OF PREFERRED REFURBISHMENT TYPE. OUR SALES REPRESENTATIVES ARE AT YOUR SERVICE FROM MONDAY TO FRIDAY, 8:30 AM TO 6:00 PM, AND SATURDAY FROM 8:30 AM TO 12:00 PM. TO REACH US BY CAR: MOTORWAY EXIT A31 THIENE, BY TRAIN: THIENE FS STATION.

Condition: used, Year of construction: 2014, operating hours: 180 h, machine/vehicle number: FA54, Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour Fgjdpfxe Adyxvj Am Eei Introduction to the Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour This machine is a used shrink wrapper model 32, manufactured by Tetra Pak in 2014. It handles the secondary packaging of aseptic carton containers, which manufacturers commonly use for liquid food products. Currently, operators have stored the unit, and they classify it as fully automatic, featuring a straight-line feed system. Moreover, it has only 180 hours of operation, which ensures minimal wear and high reliability. In terms of productivity, the machine reaches a performance level of 9,000 bricks per hour. Supported package configurations The Shrink Wrapper 32 offers a high degree of flexibility in terms of package configurations. Consequently, it adapts well to a variety of operational setups. It supports multiple layouts, including 3×1, 3×2, 3×3, 4×1, 4×2, 4×3, 5×1, 5×2, and even the Straw configuration for packs with pre-applied straws.As a result, this versatility makes the machine suitable for integration into modern, high-capacity Tetra Pak filling lines. Furthermore, it enables seamless transitions between different packaging formats without compromising efficiency. Compatibility with the 200 ml EDGE format This model works specifically with the Tetra Pak EDGE 200 ml format, which remains a standard choice for juices, dairy, and ready-to-drink products. In addition, the EDGE format requires both precision handling and consistent film application—criteria the Shrink Wrapper 32 fulfills reliably.Therefore, by combining this format with the various supported configurations, operators can address a wide range of packaging needs. Additionally, this compatibility enhances line flexibility and product presentation.As a result, the Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour serves as a high-performing option for technical teams aiming to maintain speed and versatility. Operating features and safety systems of the Used Shrink Wrapper Tetra Pak The system opera...

Condition: used, functionality: fully functional, machine/vehicle number: MK-258001, Endress+Hauser CA72TOC TOC Analyzer – Online Water Quality Analyzer For sale: a complete Endress+Hauser CA72TOC online TOC analyzer for continuous measurement of the Total Organic Carbon (TOC) content in water streams. This industrial analysis cabinet is suitable for applications in water treatment, wastewater treatment, drinking water production, and various process industries. Complete industrial analysis cabinet for continuous measurement of Total Organic Carbon (TOC) in water streams. Equipped with integrated control, sampling unit, and pump system. Ideal for applications in water treatment, wastewater treatment, and process engineering. The machine is in good used condition and is available for inspection. The installation consists of an analysis cabinet with integrated control, sampling/analysis unit, and associated pumps. Thanks to its robust industrial design, this analyzer is suitable for permanent process monitoring and quality control. Fjdpj Ah D D Ijfx Am Eogi Technical specifications: Manufacturer: Endress+Hauser Model: CA72TOC Type: Online TOC Analyzer Identification number: MK-258001 Application: Continuous TOC measurement in water Design: Freestanding analysis cabinet Includes: Control and display module Control cabinet Sampling/analysis unit Pumps and piping Electrical circuits Applications: Wastewater treatment plants Drinking water production Process water monitoring Industrial water treatment Pharmaceutical industry Chemical industry Environmental monitoring Special features: Industrial design Suitable for continuous online analysis Complete installation including control system Endress+Hauser quality system Ideal for process and quality monitoring

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,591 mm, total width: 2,438 mm, total length: 2,991 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 30 kWh, DESALINATION PLANT HF-RO: ULTRAFILTRATION AND REVERSE OSMOSIS ON A SKID The HF-RO combines hollow fiber ultrafiltration with seawater reverse osmosis. The ultrafiltration removes sediments, colloids, bacteria, and viruses and feeds the reverse osmosis directly, without an intermediate tank. This allows the system to process raw water that would quickly clog a conventional reverse osmosis system with cartridge filters: nearshore seawater, harbor water, river mouths, and water with highly variable turbidity. PERFORMANCE DATA (Design for 36,000 mg/l, 25 °C) - Inlet flow: 5.0 m³/h - Permeate flow: approx. 2.06 m³/h, approximately 48 m³/day with 24-hour operation - Inlet salinity: 250 to 43,000 mg/l (sea, brackish, and river water) - Inlet temperature: +2 to +33 °C - Inlet turbidity: up to 300 NTU, sediment up to 150 mg/l - Permeate: 150 to 500 mg/l, 300 to 1,000 µS/cm, retention rate 99.6% PROCESS 1. Disc filtration: 2 automatic disc filters 2" in duplex operation, 100 µm, backflushing with filtrate and compressed air during operation 2. Hollow fiber ultrafiltration: 4 modules, outside-in, 0.01 µm (100,000 Dalton), filtrate approx. 0.2 NTU, cyclic backflushing with air, the remaining modules continue to produce 3. Reverse osmosis: low-pulsation axial piston high-pressure pump (4.08 m³/h at 63 bar, motor 8.5 kW), 4 RO modules in GRP pressure pipes, max. 65 bar, automatic pressure and flow control CLEANING - integrated CIP for ultrafiltration and reverse osmosis - cleaning tank 2 x 100 l with 7.5 kW heater - 3 pneumatic dosing pumps for cleaning agents and chlorine - programmed disinfection, long-term preservation, and re-commissioning EQUIPMENT - materials: low-pressure ABS, high-pressure 1.4539 and 1.4410 super duplex, high-pressure pump 1.4462 duplex, tanks PP, frame stainless steel - valves in only two nominal sizes, interchangeable pumps, low variety of spare parts - PLC with 15.6" touch panel, Ethernet interface for remote monitoring - control of a frequency-controlled inlet pump - control cabinet 400 V / 50 Hz, approx. 18 to 20 kW, IP65 DIMENSIONS - main skid approx. 1,400 x 1,200 x 2,020 mm (L x W x H) - RO module stand approx. 600 x 550 x 1,990 mm APPLICATIONS Drinking and utility water for coastal and island supply, resorts and camps, desalination of harbor and river mouth water, process water for industry on the coast, emergency water supply, pilot operation for larger projects. SCOPE OF DELIVERY Main skid with disc filters, ultrafiltration, high-pressure pump, CIP system and control cabinet, RO module stand with 4 modules, internal piping and wiring, documentation (P&I, layout, process description). Not included in the scope of delivery (optional): inlet pump, compressed air supply, container housing, transport, installation, commissioning, training. Fgedpfx Amj Ahqpgj Eoi NOTE We will confirm the binding performance after you provide your water analysis. Inspection and functional testing possible before purchase. Purchase or lease-purchase. English brochure available upon request.

Condition: used, Year of construction: 2011, operating hours: 1,878 h, machine/vehicle number: TP124, Used Tetra Pak AB straw applicator 2011Technical Specifications & Performance DataThe Straw Applicator 30 is a dedicated packaging machine engineered to apply individual drinking straws onto carton packages with high accuracy and repeatability. Manufactured by Tetra Pak Packaging Solutions AB, this second hand unit is well suited for integration within beverage production and industrial packaging lines focused on carton handling. With low operating hours and CE compliance, it offers dependable performance for producers seeking to upgrade or expand a used bottling line or carton packaging operation.Manufacturer: Tetra Pak Packaging Solutions ABMachine type: Straw Applicator 30Model: 30Year of manufacture: 2011Production speed: up to 16,400 packs per hour (dependent on pack format and line speed)Container compatibility: Carton packagesSupported format: Tetra Classic Aseptic (tetrahedral)Primary function: Automated application of individual straws to preformed, filled, and wrapped cartonsOperating hours (hour meter): 1,878.6 hDrawing specification: 86335D-300CE marking: YesAdvanced Automation & Control SystemsThis machine employs a robust, PLC-based architecture with an HMI operator panel for recipe management, real-time status visualization, and streamlined diagnostics. Integrated sensors monitor straw presence and placement, while alarms and fault messages support rapid troubleshooting and reduced downtime. Quick-change parts enable efficient format adjustments, enhancing flexibility on mixed-format packaging lines.PLC-based control with HMI for set-up, recipes, and monitoringIntegrated sensors for straw presence and placement verificationAlarm and diagnostic functions for rapid fault resolutionQuick-change components for format changeoversCE-compliant guarding and interlocksProduction Line Integration CapabilitiesDesigned for inline operation, the Straw Applicator 30 synchronizes with upstream carton fillers and conveyors, as well as downstream bundling or case packing systems. Its control interfaces facilitate signal exchange for smooth product flow and coordinated speed control across the industrial packaging line.Inline integration with carton fillers and conveyor systemsInterface-ready for upstream/downstream signal exchangeFormat change flexibility for multiple carton sizes and straw typesSuitable for beverage production environments focused on carton packagingMachine Condition & Maintenance HistoryThis second hand unit presents as a low-hour machine with a clear operational profile. The hour meter indicates limited use, supporting extended service potential. Maintenance should follow OEM guidelines to sustain reliability and performance in continuous-duty applications common to beverage and industrial packaging operations.Operational status: Ready for operationLow operating hou... Fgsdpfx Aez E Dk Sjm Eoi

Condition: used, operating hours: 3,000 h, Used complete isobaric bottling line for CSD 6400 bph Fedpfxjwahdqs Am Eegi Technical Overview of the Line This Used complete isobaric bottling line for CSD 6400 bph produces carbonated soft drinks with a nominal output of 6400 bottles per hour. Specifically, the line handles 0.50-liter PET containers using an isobaric filling system. In particular, this technology maintains constant internal pressure during the filling process. As a result, it prevents carbon dioxide loss and ensures that the final product preserves its quality and carbonation from tank to cap. Container Compatibility and Specifications The line supports PET bottles with 18-10 and 18-81 PCO necks, which represent standard formats across the beverage industry. Consequently, operators can integrate the system into existing lines without modifying downstream capping equipment. In addition, this compatibility facilitates bottle sourcing and packaging flexibility. Furthermore, the system ensures that transitions between production batches remain smooth and efficient. Working Hours and Line Condition The machines in this Used complete isobaric bottling line for CSD 6400 bph have completed only 3000 hours of operation. In comparison to similar used systems, this relatively low usage indicates limited wear on mechanical parts. Therefore, technicians can expect excellent performance with minimal maintenance needs. Moreover, this condition makes the line suitable for facilities that require immediate deployment with limited downtime. Line Composition The process begins with a Sidel SBO4 COMPACT blow molding machine, built in 2006, which forms PET bottles directly from preforms. Then, the Simonazzi-Sidel Starblend mixer, manufactured in 2007 blends water, syrup, and carbon dioxide under pressure. Afterward, the product is managed in the Simonazzi-Sidel Bluestar filling monoblock, also from 2007. This unit includes 32 grippers, 32 isobaric filling valves, and 8 capping heads. Thanks to this configuration, the line fills and caps each bottle quickly while maintaining product integrity. Additionally, the machine layout allows for optimal integration of automation and operator access. Notably, each module connects via pre-aligned interfaces, which streamline installation and minimize commissioning time. Altogether, these features contribute to high production efficiency and ease of maintenance. Quality Control and End of  this Used complete isobaric bottling line To guarantee packaging integrity, the line includes a Heuft inspection unit that checks bottle necks and caps for defects. Following inspection, the bottles pass through a Sidel RollQUATTRO F15 labeling machine (2007), which applies wrap-around labels at high speed with precision. Subsequently, a Cermex CP 18 AAE shrink wrapper (2006) packages bottles into multipacks using shrink film. Throughout the process, Sidel conveyors transfer bottles between stations without creating friction points or mechanical delays.

Condition: used, Year of construction: 2009, Overview This Twin Pack MDEL-S handle applicator, built in 2009, applies carry handles to beverage multipacks. It produced multipacks in several configurations, from 2x3 and 3x4 packs of 0.5 l bottles to 2x3 packs of 0.75 l and 1.5 l bottles, and runs on pre-spooled handle tape rolls. The machine was taken out of production in October 2026 when the line was replaced, and it is dismantled and ready for transport. Technical data - Manufacturer: Twin Pack (Italy) - Model: MDEL-S - Year of manufacture: 2009 - Machine type: handle applicator for beverage multipacks - Formats: 2x3 x 0.5 l, 3x4 x 0.5 l, 2x3 x 0.75 l, 2x3 x 1.5 l - Handle material: pre-spooled handle tape rolls Fjdo Ahzarepfx Am Eegi - Control: Siemens SIMATIC touch panel - Suitable for: water, soft drinks and beer Equipment - Handle application unit in a guarded frame with transparent doors and signal tower - Pack infeed conveyor with guide rails and perforated safety guard - Separate tape unit with reel holders and push-button station with emergency stop - Operator panel on a swivel arm with key switch and emergency stop Condition Very good condition. Dismantled after the line change in October 2026 and stored. Availability Available immediately. Location: Serbia.

Year of construction: 2016, condition: used, machine/vehicle number: AT65, Technical Specifications & Performance Data The PakTech CCA 120 is a compact, high-reliability can holder applicator designed to apply plastic carriers to beverage cans with consistent accuracy. As part of a used bottling line or canning line, this second hand unit brings proven PakTech engineering to industrial packaging environments seeking dependable multipack presentation. Manufacturer: PakTech Model: CCA 120 Year: 2016 Machine type: Can Holder Applicator Nominal speed: up to 120 cans per minute (format and line conditions dependent) Container types: Aluminum beverage cans Formats: Compatible with common PakTech carrier styles and multipack configurations (subject to tooling and kit; verify in manuals) Dimensions: Width 2440 mm, Length 1230 mm, Height 1500 mm Electrical: 220V Safety features: Integrated guarding and protections Documentation: Manuals available Advanced Automation & Control Systems Engineered for continuous, reliable operation in beverage production, the CCA 120 delivers automatic carrier application synchronized with upstream and downstream conveyors. An operator-friendly control interface and robust logic control typical of PakTech systems support straightforward setup, monitoring, and troubleshooting. The 220V electrical configuration simplifies integration into existing packaging halls, while comprehensive safety guarding and interlocks protect operators during operation and changeover. Emergency stop circuitry, safety shields, and clear access points are designed to meet modern industrial packaging practices. The included manuals support parameter configuration, maintenance, and format adjustments. Production Line Integration Capabilities This applicator is ideal for positioning downstream of can rinsing and filling, after seaming/capping and labeling/coding, and before case packing, palletizing, or tray loading. It integrates seamlessly with conveyors and control signals on a used bottling line and is suitable for second hand systems handling a variety of beverage SKUs. Fsdpe Adyxcjfx Am Eegi Changeovers between carrier formats are supported with appropriate tooling, enabling agile response to production needs for beer, cider, soft drinks, energy drinks, water, juice-based RTDs, and similar products. While optimized for aluminum cans, the applicator complements broader lines that may also process PET and glass containers upstream in filling, labeling, capping, and rinsing stages. Machine Condition & Maintenance History Condition is in storage, with the machine currently disassembled. Safety features are included, and manuals are available to facilitate re-commissioning. Assorted spare parts are noted as available. As with any second hand equipment, inspection and verification of specific format kits, wear parts, and controls are recommended prior to integration into your industrial packaging environment. Operational Performance & Versatility The CCA 120 is designed to apply PakTech-style carriers accurately and gently, promoting product stability and consistent pack appearance. Its compact footprint makes it ...