Used Dividing Head for sale (10,110)

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 1425131305, Lightly used, in very good condition. Lodpfx Abszdpz Nsnjac

Condition: good (used), Barrel lifter, barrel handling, barrel gripper, barrel lifter, barrel handling, barrel gripper -Drum lifter with: gripper head -Load capacity: kg -Suitable for: 1 x 200-L steel bung drums, steel lid drums, rolling hoop drums -Reception: 410 mm Ledpfx Aed Aghkebneac -Automatic opening when: setting down the barrels -Number: 2x grippers available -Price: per piece -Dimensions: 340/305/H900 mm -Weight: 47 kg

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. width of workpiece: 220mm - max. height of workpiece: 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle electrically adjustable up/down 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - top: Lasdpfx Abjy Ux Dqonsc - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - bottom: - infeed roller, toothed, pulling, swiveling in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Infeed conveyor with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable top pressure - conveyor length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Net price: 42850 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm Lsdju N E Abopfx Abnoac *

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Flange diameter: D = 260 mm Mounting: 4 holes, diameter D = 17.5 mm Lasdpfx Abov U I Slenoc *

Condition: used, Accessories for e.g. a bench drill BFT 130: Lodpju Nlgysfx Abnoac The spindle head and swivel angle can be swivelled 360° around their own axes. Two swivel planes The set angles can be read off on circumferential scales Speed max. 600 rpm. Spindle taper ISO 50 Weight approx. 270kg incl. connecting piece to the drive SK 50 pinoler/head *

Condition: refurbished (used), functionality: fully functional, used dough divider rounder Fortuna Automat 3-30, overhauled, size 3, with square function, with 3 moulding plates, with new stainless steel cutter, for 30 pieces, machine no. A3-8989 E, weight per dough piece 32-70 g, total weight range from 960 to 2,100 g, 147 cm high, 69 cm wide, 80 cm deep, weight 540 kg, 6 A, 380 V, 50 Hz Lodpfex Tizqsx Abnoac

Condition: ready for operation (used), Kodak Thermal Imaging Head Part-Number R507-00134A Lodpfx Asiy Nx Aobneac • 50W 630nm • 10mW 680nm

Condition: excellent (used), Complete PVC Line – Automatic Double Head Welding Machine URBAN AKS 3900 + Automatic PVC Corner Cleaning Machine URBAN SV 305 – Year 2006 Professional URBAN production line composed of Automatic Double Head Welding Machine AKS 3900 and Automatic Corner Cleaning Machine SV 305, ideal for the production of PVC windows and doors. --> Automatic Double Head Welding Machine – URBAN AKS 3900 Year: 2006 Automatic 2-head welding machine – URBAN AKS 3900 Professional automatic welding machine designed for high-precision welding of PVC profiles with angle processing from 30° to 180°. The machine guarantees precise welds with weld bead limitation and excellent operational reliability. Thanks to the automatic head positioning system and fully adjustable working parameters, it allows fast and efficient production cycles. Main features No. 2 automatic welding heads Angular welding from 30° to 180° Automatic head positioning system Electronic temperature adjustment Welding time and pressure control Two-hand safety control system Adjustable profile supports Independent thermostatic controllers Controlled heating elements CE-compliant safety devices User manual available Working capacity Profile height: 30 – 130 mm Maximum profile width: 140 mm Useful welding length: 440 – 2500 mm Production capacity: approx. 200 welds / 8 hours Technical data Installed power: 3 kW Power supply: 230/400 V – 50/60 Hz Operating pressure: 8 bar Air consumption: approx. 36 l/cycle Weight: approx. 550 kg Noise level: 67 dB(A) --> Automatic PVC Corner Cleaning Machine – URBAN SV 305 Year: 2006 Automatic PVC Corner Cleaning Machine – URBAN SV 305 Automatic machine designed for cleaning and finishing welding seams on PVC windows, doors and profiles. The URBAN SV 305 allows complete processing of welded profiles, including cleaning of surfaces, external corners, internal grooves and gasket slots, also on acrylic-coated profiles. Thanks to the automatic profile recognition system and intuitive SPS control, the machine ensures high precision and easy operation. Main operations Cleaning of upper and lower welding seams External corner milling with carbide cutters Cleaning of upper and lower internal grooves Processing of internal and external gaskets Drilling of gasket grooves Inclined chamfers Equipment Tool turret for 3 cutter units Cleaning knives Adjustable milling unit Upper and lower drilling unit Adjustable pneumatic system SPS operator control panel Soft-start system and electronic motor brake User manual available Working capacity Laodpfx Ajy R Tvysbnec Profile height: 30 – 150 mm Profile width: 40 – 145 mm Minimum window dimension: approx. 210 mm Technical data Spindle/milling speed: 2800 rpm Installed power: 1.7 / 2 kW Power supply: 230/400 V – 50/60 Hz Operating pressure: 7 – 8 bar Machine weight: approx. 530 – 550 kg Noise level: 78 dB(A) Fully working line, ideal for PVC window and door manufacturers looking for a complete, reliable and ready-to-use production solution.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2304005, Sinmag divider for bakery use, in good condition Ledpszd Dytsfx Abneac 30-section model 30-120 g 2023

Condition: good (used), Universal milling angle head, milling angle head -Recording: MK4 -Drive mount: MK5 -Angle head: swiveling -Dimensions: 440/300/H310 mm -Weight: 68 kg Lasdpfx Abec Sc Ikenjc

Condition: good (used), Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm Lodpfx Abeb A Nu Rjneac -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Condition: good (used), Universal milling angle head, milling angle head -Receptacle: Collet -Recess inlet: Ø 160 mm -Bolt circle: 174 mm -Milling spindle: 45° -fully swiveling Lsdpob A Hfcefx Abneac -Dimensions: 200/185/H320 mm -Weight: 20 kg

Condition: used, Punching machine Lodjxyl D Sspfx Abnoac

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel saw 1x Compact label printer 1x "eye-M EVO" operating console 1x Human-machine interface software (HMI) MAESTRO ACTIVE 1x Maestro Pattern 1x High-performance fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance movable air cushion table - 2500x600 mm, with infeed rollers 1x Double lateral automatic aligner with motor drive 1x Foot switch for START/STOP of operating cycle Lodpoxlvktsfx Abnsac 1x Grooving device with height-adjustable saw blade via control system 1x "Autosetting" device on the saw carriage for cut length/width 1x Main saw blade motor 25 HP (18 kW) 50 Hz with star-delta starter 1x Quick-clamping of saw blades with mechanical "AKE" flanges 1x Selective collet closure (area 0 - 1600 mm) 3x Additional double collets 4x Additional single-finger collets 1x Compact office label printer 1x Cut editor 1x Maestro Optiwise - Advanced - No. 1 license 1x Maestro Connect: service contract for 1 year (including "plug & play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German 1x PC LANGUAGE: GERMAN 1x SPEC01 special version 01 1x European safety regulations (CE marking) Including 123 hours of on-site commissioning (within Germany) (daily working time is 8 hours including travel time). Includes 1 day online training for MAESTRO OPTIWISE PRO (as required) Includes 1 year MAESTRO CONNECT Includes MAESTRO PATTERN IMPORT (normally €255 - free of charge) Location:

Condition: used, ETM TCH A L500 Ø500-600 ETM SHF L200 SK50 Lajdjy Sumpjpfx Abnoc

Condition: new, • EPB Graflex A700 60 boring head • Made in France • Working range: • Capacity 1: 85–115 mm (3.345–4.530”) • Capacity 2: 114–144 mm (4.485–5.670”) • Precision adjustment 0.01 mm (0.0004”) • Catalogue no.: 1605.014.24 • Graflex system – for professional applications • The head is in storage condition • No evidence of use. Only minor storage scratches • Sockets and scales in perfect condition • Mechanism operates smoothly and easily Lodpfx Asw Rdybsbnjac • Ready for immediate use • EPB Graflex stands for proven quality and reliability

Condition: good (used), I will sell Benz angle heads. Price given for 1 pc. - 4-40370 Lasdpfx Aov Up Hwobnsc -4-40371

Condition: excellent (used), Professional milling head from the renowned brand Sandvik Coromant. Working diameter: Ø80 mm – ideal for roughing and finishing machining of steel, stainless steel, and cast iron. Mount: SK40 / ISO40. Model: 346.220242R25. Design with indexable inserts – currently equipped inserts are in good condition. High precision, rigidity, and durability – industrial-grade head for CNC machining centers and milling machines. Original Sandvik product – a leader in cutting tool technology. Condition: used, in very good technical condition – ready for immediate operation ✅ Ideal for facing, face milling, and processing large surfaces ✅ High performance and long service life thanks to high-quality inserts ✅ Premium tool – German and Swedish quality Ledpexld Awefx Abnoac

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Laodpfx Ajxk T Igobnjc

Condition: excellent (used), For sale: high-end precision boring head EPB LIBRAFLEX / GRAFLEX with SK40 DIN 69871 taper, made in France. This is a professional tool for precision hole machining—both roughing and finishing—on CNC milling machines and machining centers. This model features micrometric diameter adjustment in the range of Ø2 mm to Ø32 mm (0.079” – 1.260”), allowing for the highest accuracy in machining industrial components, moulds, and technical parts. 📌 Technical Specifications: • Manufacturer: EPB LIBRAFLEX / GRAFLEX – Made in France • Taper: SK40 – DIN 69871 • Adjustment range: Ø2 – 32 mm • Adjustment accuracy: 0.01 mm / 0.0004” • Precision micrometric scale with clear graduation Ledpfxexizcvj Abneac • Set includes head + holder + KOMET tool • Condition: used, in very good technical condition – ready for work ✅ Advantages: • High adjustment precision – ideal for hole finishing • Robust industrial construction – long service life • Compatible with CNC machines and conventional milling machines with SK40 taper • Micrometric diameter setting with μm reading • Ideal for industrial applications, toolrooms, and precision manufacturing

Condition: excellent (used), For sale: Professional milling head from the renowned brand JEB ToolTechnic Zerspanungswerkzeuge. Model: S2138.063.R06IK Cutting diameter: Ø63 mm Mounting: SK40 Number of insert seats: 6 Condition: used, in very good technical condition, equipped with cutting inserts – ready for use. This head is ideal for machining steel and cast iron in both roughing and finishing operations. Proven in production, ensures high performance and precision milling. Ljdpfjxk T N Rsx Abnsac

Condition: excellent (used), For sale: high-quality milling head from the renowned brand Walter – Xtra-tec® series, designed for precise roughing and semi-finishing of metals. Premium industrial tool, ideal for CNC machining centers and conventional milling machines. • Working diameter: Ø80 mm • Model: F4033.B27.080.Z07.06 • Mount: SK40 / ISO40 • System: Xtra-tec® • Number of insert pockets: 7 • High-quality build – German Walter precision • Applications: face milling, machining of steel, cast iron, alloys • Condition: used, very good technical condition, ready for work. This milling head delivers excellent performance and long service life – ideal for industrial, workshop, and production applications. Lodpfx Asxlgniebneac

Condition: excellent (used), • Model: WIDAX WULMIX-HE LINE M68 Ø160 R16 • Mounting: SK40 DV40A SE40 050 tool holder • Diameter: Ø160 mm • Number of insert pockets: large – full set • Insert type: 058 (reusable, replaceable) • Condition: very good, teeth and body without damage, ready for use • Precisely balanced steel body • Manufacturer: WIDAX – Made in Germany • Ideal for CNC milling machines and machining centers with SK40 spindle Lasdpfexmu A Dox Abnsc

Condition: excellent (used), Professional milling head with SK40 mount designed for facing and roughing steel and cast iron. Model: AHSC 100-05-11. Working diameter: Ø100 mm. Maximum speed: 22,500 rpm. Number of insert seats: 4. Mount: SK40. Condition: used, fully functional – visible signs of use. Ideal for CNC machining centers and conventional milling machines, ensuring high performance and stability even at high cutting speeds. Lajdpfx Aoxk T Rnobnec