Used Dm Italia for sale (5,203)

Condition: ready for operation (used), Baumüller GDM 12 Z DC motor – disc rotor, serial number: 154982, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ibjdsi D E D Ijpfx Akxja

Condition: new, Kessler DMQ .4.AFB motor, mounting hole spacing: 248 x 248 mm, drive shaft diameter: 55 mm, unused with storage marks, 100% functional, scope of delivery as per photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Ibsdoi D Iyzspfx Akxja

Condition: new, Franz Kessler DMR 100.52.4.R0H three-phase asynchronous motor, serial number: 187242, unused, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Ijdpfx Akji D H Tnjxeba

Condition: ready for operation (used), Indramat TDM 1.2-30-300W0 servo controller, serial number 236232-777278-083, professionally and completely overhauled and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately. Ibsdpfxoi Ebn Ie Akxsa

Condition: ready for operation (used), Franz Kessler DMQ 160 M-I, serial number: 123458, used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Isdpsi D H Tgjfx Akxsba

Condition: ready for operation (used), Heidenhain QSY 155D Motor ID: 339 881-03 SN: 39324808N - without type plate,professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,used, good condition, 100% functional, scope of delivery according to photos Iedpsu Sd Arefx Akxjba

Condition: new, Schneider Electric BRS39AHS0033 / VRDM3910/50LHB Lexium BRS stepper motor, serial number: 2900272790, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Ijdpji D Nyvefx Akxsba

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124. Isdszhxi Dopfx Akxjba

Condition: ready for operation (used), Year of construction: 2003, operating hours: 6,276 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 63 V was manufactured in 2003. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a Siemens 840D control unit and has a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 63 V vertical machining centre we have for sale. Contact us for further details. - Total Power On: 24,787 h- Spindle / Cutting Time: 6,276 h- Apparent Power: 30 kVA- Max Current (Jn max): 50 A- Rated Current: 45 A- Voltage: 400 V / 230 V / 24 V- Frequency: 50/60 Hz Ijdpfx Ajzt N Saekxsba Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2003, Ref:11135 . 2003 Hoerauf BDM ‘Universal’ Case Maker For short, medium and long runs with the shortest set-up time and the widest open case format. Suitable for 3-piece cases, game boards, padded cases for photo albums, pocket diaries, bible cases etc. Equipped for thin, soft flexible book cases with equipment for second pass case lining. Comprising; LCD Screen for menu guided set-up and fault display. Conveyor feed of pre-cut boards Triple reel feeder for soft spines with auto-splice Magazine feeder for stiff or hollow spines Shingle conveyor feed of pre-cut cloth Ijdpfx Aozq Ebrokxsba Pre-melt tank Mobile hot-melt gluing unit and circulation pump Delivery with counter and roller table DC drive motor Complete with compressor, tools & accessories. Specification: Open case size standard : Max. 380 x 680 mm, Min. 130 x 190 mm Board thickness : Max. 4 mm, Min. 1 mm Spine width : Max. 80 mm, Min. 8 mm Spine thickness, flexible : Max 0.5 mm, Min 0.3 mm Rigid : Max. 3 mm, Min 1 mm Cover material : Max. 0.3 mm, Min 0.1 mm Mechanical speed : Max. 60/min.

Condition: excellent (used), Year of construction: 2003, Deckel Maho DMU100T (Monoblock) 5-axis machine Year of manufacture: 2003 Information: New main spindle installed in December 2025 Control system: - Heidenain iTNC530 Travel ranges: - X - 1060 - Y - 710 - Z - 710 Table: - Clamping area 1500 x 800 mm - Table load max. 2000 kg - Rotary table 360° Swivel head: - NC swivel milling head Tool changer: Iodpfx Ajzuprcekxjba - 32 magazine positions Coolant: - Internal coolant system (IKZ) - Strip filter system

Condition: good (used), Plates Size: 520x520x40mm We have 16 plates in the stock Price for one plate 450 eur Isdpfsl D Nxksx Akxoba

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate Ibedpezum Dijfx Akxoa – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Ibodpfx Aozuxn Tokxoa Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Iodpfxjzc Ilxs Akxjba

Condition: good (used), Year of construction: 2010, operating hours: 43,982 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,700 mm, total length: 3,500 mm, total width: 3,000 mm, table load: 800 kg, rotational speed (max.): 18,000 rpm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,992 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Note: We offer flexible financing solutions for all machines, as well as a professional relocation service. Disassembly, transport, and professional reassembly – all from a single source. Billing is based on individual terms and conditions and duration. Contact us for your personal offer. Ibodpezudpiofx Akxea

Condition: used, Year of construction: 2001, x-travel 1000 mm y-travel 800 mm z-travel 500 mm control Siemens 611 Ijdpsztfx Aefx Akxeba

Condition: used, mileage: 34 km, power: 96 kW (130.52 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: automatic, number of seats: 9, total length: 5,981 mm, total width: 2,533 mm, total height: 2,448 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4100.NW26.TL09576 ---- Subject to errors and prior sale! Conversion of Compoint to MTW * Siren, special signal system * 3rd tail light * Digital radio SPECIAL EQUIPMENT * Trailer hitch - fixed, 13-pin socket - incl. trailer stabilization (TSC) * Anti-theft alarm system * Rear air conditioning - rear water heater - automatic climate control * Technology Package 6P: Exterior mirrors with turn signals, electrically adjustable, heated and folding; Blind Spot Assist incl. Cross Traffic Alert; Audio system; Fog lights; LED downlight; Pre-Collision Assist, camera and radar-based; Rear collision warning system; Lane Keeping Assist; Traffic sign recognition system; Enhanced Park Pilot system front and rear; Adaptive cruise control with stop & go function; All-round camera; Navigation * Rear seat backs, adjustable tilt - incl. headrests and armrests for aisle access * Sliding door, left * Auxiliary heater package 2 - auxiliary heater (fuel-powered additional heater), programmable, incl. remote control, incl. 2 batteries and anti-theft alarm system FURTHER EQUIPMENT * 1 battery * 12-inch multifunctional display and Ford SYNC 4 voice control, extended Bluetooth hands-free system, USB interface, SMS read-out and sending function, integration of storage media (e.g. USB sticks or MP3 players) for playing music, Emergency Assist, Ford Power-Up software updates (over-the-air update technology) * ABS, EBD, ESP, TCS * Front axle load increase to 1850 kg * Driver airbag * Exterior mirrors, electrically adjustable and heated - with integrated turn signals Ibsdpfxszkypke Akxoa * Extended battery life * Floor covered with rubber, full vehicle length * On-board computer * Third brake light * Medium roof * Headliner * Double-wing rear door/180° opening angle (with window) - with heated rear window, rear window wiper incl. washer nozzle and automatic activation when reversing * Rev counter * Vehicle modem - incl. Live Traffic information and WLAN hotspot 5G Modern - Information about the current status or location of the vehicle and control of selected vehicle functions via the smartphone with the Ford App - Real-time traffic information (in conjunction with the navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) * Windows, 2nd row: Fixed side windows * Electric front windows * Electronic parking brake * Ford Easy Fuel * Heated windshield * 8-speed automatic transmission * Glove compartment with lockable lid * Interior lighting * Interior mirror * Fuel tank 70 l * Paint: Solid color * Cargo area lighting * Driver fatigue and attention warning * Technology Package 2 * Diesel particulate filter * Wheel covers * Wheels: Steel 6.5 J x 16 with 235/65R16 tires * Windshield wipers with rain sensor * Headlamps/daytime running lights * Sliding door, right * Low side paneling * Power steering * Seat belts * Rear seat package 4 - narrow 3-seater bench in 2nd row, extendable, with three height-adjustable headrests, 3-point seat belts, with one ISOFIX bracket - wide 3-seater bench in 3rd row * Seat package 8A - Driver's seat, 4-way adjustable - Double passenger seat - Passenger seat, 2-way manually adjustable - Headrests, height-adjustable - Driver's seat & passenger seat (outer seat), individually and variably heated - Tray on the passenger double seat (fold-out) - Interior armrest driver - Lumbar support driver - Seat cover: Fabric

Condition: used, mileage: 34 km, power: 96 kW (130.52 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: automatic, number of seats: 9, total length: 5,981 mm, total width: 2,533 mm, total height: 2,448 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4103.NW26.TL09571 ---- Errors and omissions excepted! Compoint conversion to MTW (mobile workshop vehicle) * Siren, special warning system * 3rd rear tail light * Digital radio SPECIAL EQUIPMENT * Tow hitch - fixed, 13-pin socket - incl. trailer stabilization (TSC) * Anti-theft alarm system * Rear air conditioning - rear water heater - automatic climate control * Technology Package 6P: exterior mirrors with turn signals, electrically adjustable, heated and foldable, blind spot assist incl. cross-traffic alert, audio system, fog lights, LED downlight, pre-collision assist, camera and radar-based, rear collision warning, lane keeping assist, traffic sign recognition system, extended park pilot system front and rear, adaptive cruise control with stop & go function, all-round view camera, navigation * Rear seat backs, adjustable - incl. headrests and armrests for aisle access * Sliding door, left * Stand-up heater package 2 - stand-up heater (fuel-powered auxiliary heater), programmable, incl. remote control, incl. 2 batteries and anti-theft alarm system OTHER EQUIPMENT * 1 battery * 12-inch multifunction display and Ford SYNC 4 voice control, extended Bluetooth hands-free system, USB interface, SMS read-out and sending function, integration of storage media (e.g. USB sticks or MP3 players) for playing music, emergency assistance, Ford Power-Up software updates (over-the-air update technology) * ABS, EBD, ESP, TCS * Front axle load increase to 1850 kg * Driver airbag * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Extended battery life * Floor, rubberized, entire vehicle length * On-board computer * Brake light, third * Roof, medium height * Headliner * Double-wing rear door / 180° opening angle (with window) - with heated rear windows, rear window wiper incl. washer nozzle and automatic activation when reversing * Rev counter * Vehicle modem - incl. live traffic information and WLAN hotspot 5G Modern - information about the current status or location of the vehicle and control of selected vehicle functions via smartphone with the Ford app - current traffic information in real time (in conjunction with the navigation system) - WLAN hotspot (up to 5G / LTE, for up to 10 mobile devices) * Windows, 2nd row: fixed side windows * Electric front windows * Electronic parking brake * Ford Easy Fuel * Heated windshield * 8-speed automatic transmission * Glove compartment with lockable lid * Interior lighting * Interior mirror * Fuel tank 70 l * Paint: solid paint * Load space lighting Ijdpfx Akezkyn Tsxeba * Driver fatigue and attention alert * Technology Package 2 * Diesel particulate filter * Wheel covers * Wheels: steel 6.5 J x 16 with 235/65R16 tires * Windscreen wipers with rain sensor * Headlights - dipped beam / daytime running lights * Sliding door, right * Side panel trim, low height * Power steering * Seat belts * Rear seat package 4 - narrow 3-seater bench in 2nd row, expandable, with three height-adjustable headrests, 3-point seat belts, with one ISOFIX bracket - wide 3-seater bench in 3rd row * Seat package 8A - driver's seat, 4-way adjustable - passenger double seat - passenger seat, 2-way manually adjustable - headrests, height-adjustable - driver's seat & passenger seat (outer seat), individually and variably heated - tray on passenger double seat (fold-out) - internal armrest for driver - lumbar support for driver - seat cover: fabric

Condition: excellent (used), Year of construction: 2015, X-axis 850 mm Y-axis 520 mm Ibsdpfxjwvr Tns Akxsa Z-axis 475 mm Spindle speed 10,000 rpm Spindle mount HSK 100 Tool changer 40 positions Control SIEMENS 840 Dsl Power 33 kVA Including internal coolant (IKZ) Including various tool holders Including measuring probe TS 649 Including Rotoclear Spindle hours: 10,730 h

Condition: used, Year of construction: 1997, operating hours: 32,000 h, total height: 2,700 mm, total length: 5,500 mm, total width: 2,500 mm, Colour: White Empty weight: 13.000 kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 120245 - Operating hours: 32000 - Drive system: CNC - Horizontal/vertical: Horizontal and vertical - Control system brand: Heidenhain - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 Ibedpfey Uv U Hsx Akxja - Z-axis travel [mm]: 800 - C-axis rotation [°]: 360 - Table length [mm]: 1250 - Table width [mm]: 1000 - Tool holder: SK40 - Max. spindle speed [rpm]: 18000 - Options: Digital readout, Tool magazine - └ Type of digital readout: Heidenhain - └ Tool magazine [pcs.]: 30 - Transport dimensions: 5500mm x 2500mm x 2700mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2001, operating hours: 26,266 h, condition: used, Colour: Grey Empty weight: 7.000 kg Dimensions (LxBxH): 350 x 220 x 240 cm Price: On request Milling machine, VMC Model: CNC Manufacturer: DMG / Deckel MAHO Type: DMU60T Year of manufacturing: 2001 Control: Heidenhain Working-hours: 26266 Travel: 630x560x560mm Spindle-speed: 10.000 rpm Table-dimensions: 1000x600mm Spindle-take: ISO40 Max. Workpiece-weight: 400kg Ibedpfx Asywt Nyjkxja Incl. Filter Interlit SK200-760 Incl. Automatic toolholder Incl. Documents Incl. Video available Machine-weight: 6700kg Machine-dimensions: 3500x2400x2200mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 26266 - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 3 - X-axis travel [mm]: 630 - Y-axis travel [mm]: 560 - Z-axis travel [mm]: 560 - Table length [mm]: 1000 - Table width [mm]: 600 - Tool holder: SK40 - Max. spindle speed [rpm]: 10000 - Options: External cooling, Tool magazine - Transport dimensions: 3500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: - Belt length: approx. 1,700 mm + 2,700 mm Iedpfszryuvsx Akxoba - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 35M with Siemens 810 D ShopMill, including accessories cabinet!! Technical data: Iedoztaqgopfx Akxsba >> Year of construction approx. 2000 >> Siemens 810 D ShopMill >> Speed range 20 - 6300 min-1 >> Feed rate: 1 - 5000 mm/min >> Input 5 m >> Spindle SK-40 >> Travels X350mm / Y240 mm/ Z340 mm >> Universal swiveling rotary table 400 x 280 mm >> Rotation range 360 °, swivel range +105/-15 ° >> Table load capacity 100 kg >> Coolant system >> Drive power: 6.3/10 kW Connection values: >> Required air pressure 6 bar >> Power consumption: 15 kVA >> Preliminary fuse: 35 A at 400 V Space requirement machine (including space for maintenance and operation) L x W x H: approx. 3.6m x 3.8m x 2.1m Transport dimensions approx. 2 x 2 x 2.1 m Weight 1,600 kg About the machine: Offered is a universal milling machine Deckel Maho DMU 35M with a CNC control system from Siemens 810 D ShopMill in very good condition. The table can be manually (digitally) adjusted via two additional axes B and C. The control system is very easy to use; it can input and approach positions, perform through-holes and thread drilling, create drilling patterns, hole circles, hole rows, and mill rectangular pockets. Programs can be input and read via an interface. The machine includes an accessories cabinet with tools, tool holders, collets, probes, and much more. The machine was used for training purposes in a large company. Take advantage of the opportunity to inspect and test the machine on-site while it is powered up.

Condition: new, empty load weight: 10,500 kg, maximum load weight: 29,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 2 pairs of wheel recesses with covers, ABS, air suspension with raising and lowering function, total loading area length approx. 10,250 mm, low-bed approx. 7,150 mm long, loading height approx. 890 mm, 24 x lashing points each with a capacity of 10 tons, 40 x lashing points each with a capacity of 3 tons, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and at the rear slope, loading ramps adjustable laterally, wooden floor 68 mm thick, storage box with lid for lashing chains or tie-down straps, contour marking according to regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, surcharge for: hydraulic adjustment of the ramps = price: €1,000, -- subject to printing errors, mistakes and changes, sample images --, more data under: !, More Details: ! Ibodpfx Akoztd S Ujxja