Used Double Bench Planer for sale (14,202)

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm Hnedpfx Aleygx D Homsr control SIEMENS Sinumerik 850T workpiece weight 17 t Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW Hjdpfx Asuhhzholmsnr weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: good (used), NOVOTEST Impulse Test Stand / High-Pressure Test Stand Sale from site! Manufacturer: NOVOTEST / BLUM-NOVOTEST GmbH Type: Impulse Test Stand System No.: 00318 Version: High-pressure impulse test stand with hydraulic supply and test cell For sale is a used NOVOTEST impulse test stand suitable for industrial applications, test engineering, hydraulics, research, development, and quality assurance. The system was used for dynamic internal pressure testing of hoses, pipelines, fittings, and containers, and features computer-controlled test sequence management. Technical data: Max. operating pressure: 1,500 bar Test medium: Mineral oil / various testing media possible Frequency: 50 Hz Rated power: 135 kVA Operating voltage: 3 x 500 V PEN Control voltage: 230 V~ / 24 V- Pre-fusing: min. 160 A / max. 200 A Impulse volume at 1,500 bar: max. 140 cm³ Impulse volume at 1,000 bar: max. 210 cm³ Additional pressure stage: max. 340 cm³ Maximum test frequency: 1.7 Hz Test fluid temperature: up to max. 160 °C Temperature control accuracy: ± 3 °C Total weight according to nameplate: approx. 6,000 kg Equipment: - Complete industrial impulse test stand - Enclosed test chamber / test cell - Hydraulic power supply - Specimen supply system - Power section - Test cabinet - Operator cabinet - PC-based control system - Pressure and displacement transducers - Temperature control - Flushing system for test media - Safety monitoring / emergency stop - Technical documentation available Hydraulic power unit: Hnedpfxjy Rp R Te Almor - BOSCH hydraulic power unit - Output: 55 kW - Voltage: 500 V / 50 Hz - Tank volume: approx. 840 l - Max. operating pressure: approx. 280 / 315 bar Suitable for: - Pressure impulse testing - Hydraulic testing - Burst testing - Hose testing - Component testing Condition: Used system with age and usage-related wear. Visual condition as per photos. The unit comes from industrial use. Scope of delivery: - NOVOTEST impulse test stand - Test cell / test chamber - Hydraulic power unit - Control and operator cabinet - PC / monitor / operator unit - Drawer cabinet with accessories - Technical documentation / folders - Scope of delivery as depicted Commercial sale – sale without warranty. Subject to changes and errors.

Condition: used, Second-hand planer head for back-toothed blades by Ekert, designed for professional woodworking applications. Designed for working with wood using back-toothed blades and suitable for typical planing tasks. Technical data: - Blade: RVZ Z2 Hnjdpfxjzuny Sj Almer - Cutting circle (ø): 122 mm - Bore: 40 mm - Marking: MEC - Length: 130 mm - Material: Steel

Condition: used, Second-hand Leitz VariPlan planer head for professional use in woodworking. The planer head is designed for machining wood-based materials and is fitted with indexable blades. Suitable for typical planing tasks in industrial and craft production. Technical data: - Blade: Reversible blade Z2 - Flight circle (ø): 125 mm Hnjdezunxnepfx Almsr - Bore: 40 mm - Marking: MEC - Length: 170 mm - Material: Steel

Condition: used, Second-hand planer head from Örtli for professional woodworking. The planer head, fitted with reversible blades, is suitable for standard planing tasks and use in woodworking. Technical data: Hedpfx Alszunwwsmonr - Blade: Reversible blade - Flight circle (ø): 125 mm - Bore: 40 mm - Marking: MEC - Length: 130 mm - Material: Aluminium

Condition: used, The second-hand Leitz Type 500 planer head is designed for professional planing work in woodworking. It is fitted with Z4 strip planer blades and is suitable for machining timber workpieces. The steel construction is intended for use on compatible woodworking machines. Technical data: Hodpfxezuniae Almenr - Blade: Z4 planer blade - Cutting circle (ø): 125 mm - Bore: 40 mm - Length: 230 mm - Material: Steel

Condition: used, Second-hand Weinig Type 530 Centrolock planer head for professional planing work in woodworking. The steel planer head with Centrolock blades is suitable for use on compatible planing machines. The design is intended for the precise and efficient machining of timber workpieces. Technical data: - Blade: Centrolock Z2 - Flying diameter (ø): 125 mm - Bore: 40 mm - Marking: MEC - Length: 230 mm - Material: Steel Hnsdpfx Aezum Dpjlmor

Condition: used, Second-hand Centrolock Weinig Type 530 planer head for professional woodworking. The planer head is used for machining wood and is designed for use in suitable planing machines. Fitted with Centrolock Z2 blades, it is suitable for precise planing work in woodworking. Hjdpfx Aozuklqjlmenr Price per item, Available: 2 Technical data: - Blade: Centrolock Z2 - Flight diameter (ø): 125 mm - Bore: 40 mm - Marking: MEC - Length: 130 mm - Material: Steel

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Hnedpfx Alswx R Rdsmer Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted Hnedpfx Aozulu Tjlmor – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue number 7832 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 pcs - max. thickness of processed element: 300mm - digital planing thickness display Hnedpfx Aljzkrz Eemer – from above: - kickback fingers - sequential infeed roller - planing shaft - 2 smooth, driven, metal outfeed rollers – from below: - adjustable rollers in the lower table: 2 pcs - table on 4 screws - motor: 7.5kW - brake - electric table lifting - 2 feed speeds: 7/14m/min - feed motor: 0.75/1.1kW - extraction nozzle diameter: 160mm - dimensions (L/W/H): 1540x1220x1230mm - weight: 1300kg ADVANTAGES – Polish manufacture – electric table lift – sectional feed roller – used thickness planer, very good condition Net price: 32,900 PLN Net price: 7,840 EUR based on 4.2 EUR rate (Prices may change with significant variations in exchange rates)

Condition: excellent (used), Catalog number: 7303 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 3 pcs - Max. thickness of the workpiece: 250mm From above: - Pawls Hedpfx Aljzkg Tcomsnr - Toothed infeed shaft, pulling - Pressure rollers - Surfacing shaft - Pressure rollers - Smooth outfeed shaft, pulling From below: - Adjustable rollers in the lower bed: 2 pcs - Motor: 7.5kW - Electric bed lifting - Lifting motor: 0.75kW - 4 feed speed settings - Feed motor: 1.5kW - Diameter of dust extraction nozzle: 140mm - Dimensions (L/W/H): 1120x1250x1680mm - Weight: 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Net price: 4738 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to larger fluctuations)

Condition: excellent (used), Catalog number: 8076 TECHNICAL DATA - Roller width: 510mm - Number of knives: 4 pcs - Max. workpiece thickness: 260mm - Digital thickness display - From above: - Chip deflectors - Infeed roller - Planing roller - Pressure roller - Outfeed roller (smooth, pulling, metal) - From below: Hnodpozuk Ifjfx Almor - Tabletop, mounted on 4 screws - Motor, approx. 5.5kW - Brake - Electric tabletop lifting - 2 feed speed settings: 4/16m/min - Dust extraction port diameter: 140mm - Dimensions (L/W/H): 1000x1100x1100mm - Weight: 562kg ADVANTAGES - Made in Italy - Electric tabletop lifting - Used thickness planer, very good condition Net price: 17900 PLN Net price: 4262 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Catalog number 8074 TECHNICAL DATA PLANER: - roller width 410mm - 3-knife roller - smoothing comb - roller guard - adjustable angle guide - table length 2000mm - both tables adjustable THICKNESS PLANER: - max thickness of workpiece on the thickness planer 220mm - thickness planer roller guard - from above: - pawls - toothed, twisted infeed roller - pressure rollers Hedpfx Aljzuk Ewjmenr - planing roller - pressure roller - smooth outfeed roller - main motor 4kW - electric brake - electric table height adjustment (up/down) - knife setting device - 2 speed settings 6000/12000rpm - dust extraction port diameter 2x120mm - dimensions L/W/H 2060x970x1150mm - weight 660kg ADVANTAGES - Made in Italy - Smoothing comb - Knife setting device - Unpainted - Excellent condition - Used planer-thicknesser Net price: 16900 PLN Net price: 4024 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: used, Second-hand Leitz ProFix planer head set for professional woodworking. The planer heads are suitable for precise milling and planing work on wooden components. Hedpfxjzt Rx Io Almonr Technical data: - Blade: ProFix - Cutting diameter (ø): 130 mm - Bore: 40 mm - Marking: MEC - Length: 90 mm - Material: Steel

Condition: used, Second-hand Leitz HeliPlan spiral-tooth planer head for professional use in woodworking. The planer head is suitable for precision planing work and typical applications on woodworking machines. The version with an aluminium body and WP blades is designed for versatile use in the workshop. Technical data: - Blade: WP - Flight circle (Ø): 125 mm - Bore: 40 mm - Marking: MEC - Length: 166 mm - Material: Aluminium Hedozt Nxaopfx Almjnr

Condition: excellent (used), Catalogue number 7736 TECHNICAL DATA - shaft width: 410mm - number of knives: 4 - noise-damping comb at the shaft - table length: 2530mm - brake - cast iron tables - both tables adjustable - original, angle-adjustable guide - motor: 3kW - extraction port diameter: 140mm Hnjdpfx Aezkrqgjlmsr - dimensions L/W/H: 2530x850x1350mm - weight: 680kg ADVANTAGES – manufactured in Poland – 4-knife shaft – brake – upper control panel – noise-damping comb at the shaft – DTR documentation – used jointer, in very good condition Net price: 12,900 PLN Net price: 3,070 EUR depending on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg Hnodpfx Alezgaiijmsr transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: excellent (used), Year of construction: 1995, Combined planer and thicknesser from Hofmann, featuring the legendary Leitz-Wigo spiral cutterhead, with a very robust design in a compact format. A special feature of this machine: the planing table does not need to be folded up for thicknessing, so no conversion is necessary. Equipped with a "genuine" spiral cutterhead. Planing width approx. 620mm Thickness table electrically adjustable with digital display, fine adjustment via handwheel Ribbed steel infeed roller Rubber-coated outfeed roller, new Planing height approx. 4 - 240mm 2 feed speeds 7 + 14 m/min Table length 2520mm Drive motor 5.5kW with automatic motor brake 2-knife cutterhead with spiral, re-sharpenable HSS knives Two sets of spiral knives are included, each installed in matching pressure blocks. Re-sharpening is done by a sharpening service, and the sharpened knife sets can then be easily screwed into the cutterhead without any adjustment work. Slotted table lips Cutterhead guard Suvamatic Fence swivels with guide rail Concave/convex edge setting of the planing table Rod for hanging the dust extraction hood Hsdpfx Aljztkyxsmsnr Dust extraction port 2 x 160mm Only a few spots have been touched up V-belt renewed Knives sharpened Rubber outfeed roller renewed Operating manual CE marking No scratches on the tables. Thickness table with two adjustable table slide rollers Dimensions approx. 2520 x 1200 x 1200mm (L x W x H). Weight approx. 1300kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse, see "other offers from this provider".

Condition: good (used), Year of construction: 1999, Cutting length: 6,000 mm Hnsdpfx Aozn Iimelmor Rotational speed: 2,800 rpm Total power: 11.3 kW

Condition: used, Langbein double-saddle grinding bench with left/right feed for woodworking. Hnodpjztvznjfx Almor Technical data: - Clamping length per side: approx. 450 mm - Spindle diameter: 45/35 mm

Condition: used, Year of construction: 1986, total width: 6,030 mm, total height: 1,500 mm, Colour: Green Dimensions (LxBxH): 175 x 603 x 150 cm Four-sided planer Weinig Profimat 22N Serial number: 226 - 742 400v, 40Amp. Max working width 220mm Max working height 120mm Input table length 1950mm Throughput speed 4-20 m/min Spindle diameter 40mm Speed spindles 6000 U/min 1st spindle, bottom: kW 2nd & 3rd spindle, left & right: kW 4th spindle, top: kW Hnsdpfxownhh Se Almor Dimensions; 3400x1500x1400mm, Own weight 1600 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 226 - 742 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle type: Bottom - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 140 - └ Spindle 2: - - Spindle type: Right - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 120 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 120 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 120 - - Tool present: Yes - Min. planing width [mm]: 50 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 1970 - Feed roller diameter [mm]: 140 - Tool type: Standard - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 135 - Voltage [V]: 400 - Current consumption [A]: 40 - Fuse [A]: 50 - Transport dimensions: 1750mm x 6032mm x 1500mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, A set of Weinig combination planing heads. Combination of a profile cutter head for back-toothed blanks and Centrolock indexable cutters for simultaneous planing and profiling. Technical data: - Blades: Z2+Z2 - Cutting circle (ø): 125 mm - Bore: 40 mm Hsdpfsztvf Hex Almonr - Marking: MEC - Length: 240 mm - Material: Steel

Condition: used, total width: 2,600 mm, total height: 1,750 mm, Colour: Green Dimensions (LxBxH): 130 x 260 x 175 cm - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle type: Bottom - - Max. planing block diameter [mm]: 120 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Top - - Max. planing block diameter [mm]: 120 - - Tool present: Yes Hedpfx Aswniy Njlmjnr - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Max. planing block diameter [mm]: 120 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Right - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Max. planing block diameter [mm]: 140 - - Tool present: Yes - Max. planing width [mm]: 500 - Max. planing height [mm]: 200 - Feed table length [mm]: 650 - Feed roller diameter [mm]: 120 - Feed motor [kW]: 10 - Tool type: Standard - Diameter extraction nozzle [mm]: 180 - Voltage [V]: 400 - Current consumption [A]: 55.2 - Power [kW]: 26.7 - Transport dimensions: 1300mm x 2600mm x 1750mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels