Used Double Bench Planer for sale (14,428)

Condition: excellent (used), Catalogue number 7987 TECHNICAL DATA - Roller width: 500 mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230 mm – From above: - Anti-kickback fingers - Toothed, feed-in roller; pulling, swiveling - Pressure bar - Planing shaft - Pressure bar - Smooth, feed-out roller; pulling - Motor: 4 kW - Electrically adjustable table height - 2 feed speeds: 8/12.5 m/min - Dimensions (L/W/H): 1000x1000x1050 mm - Weight: 620 kg Knjdpfxezu Save Ak Aja ADVANTAGES – Made in Italy – Used thickness planer, in very good condition Net price: 14,900 PLN Net price: 3,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7695 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 - max thickness of processed workpiece: 200mm *from above: - pawls - feed roller, toothed, sequential (split, segmented) - pressure rollers - planing shaft - pressure rollers - outfeed roller, smooth *from below: - slip roller, smooth, at entry - feed roller, smooth, at exit - adjustable rollers in the lower table - electric table elevation - main motor: 7.5kW - stepless feed speed adjustment: 8-24m/min - extraction port diameter: 180mm - dimensions (L/W/H): 1400x1100x1650mm - weight: 1650kg Net price: 17,900 PLN Net price: 4,260 EUR (based on 4.2 EUR rate) Knjdpfezu Sacex Ak Asa (Prices may change with greater fluctuations)

Condition: excellent (used), CATALOGUE NO. 7966 TECHNICAL DATA - Max. planing width: 770mm - Max. two-sided planing height: 200mm - Electric adjustment of the table up/down - Max. four-sided planing height: 180mm From above: - Driven, toothed feed roller - Kickback devices - Pressure element - 2 driven, toothed feed rollers (first one sequential) - Pressure element - 770mm planing shaft, 4-knife, 7.5kW - Pressure element - Smooth outfeed roller From below: - Guide bar - Split, smooth sliding roller - 770mm planing shaft, 4-knife, 5.5kW - 2 smooth driven feed rollers From the side: - 2 lateral spindles + pressure element: 1) Right vertical, 180mm, 5.5kW 2) Left vertical, 180mm, 5.5kW - Spindle diameter: 30mm - Spindles adjustable up/down, right/left - Manual planing width adjustment - 4 feed speeds: 6/9/12/18 m/min - Feed motor: 2.4kW - Extraction nozzle diameter: 160mm, 180mm, 2x120mm - Dimensions (L/W/H): 2600x1700x1650mm - Weight: approx. 3000kg ADVANTAGES - Ideal for processing beams, flooring, etc. - German-made by KUPFERMUHLE - Supplied with 2 spindle heads for the side spindles Kodpfx Akezu R Uxo Aena - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (subject to 4.2 EUR rate) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8034 Knjdpfx Ajzu R Thjk Aoa TECHNICAL DATA - max. width of workpiece – upper roller: 510mm - max. width of workpiece – lower roller: 450mm - max. thickness of workpiece, 2-sided: 200mm – from the top: - ejectors - 1 toothed metal feed roller - 2 metal feed rollers, sequential - 1 toothed metal feed roller - pressure roller - 510mm planing roller, 4 knives, with the possibility of fitting profile knives, approx. 7.5kW - pressure roller - smooth metal feed roller - upper pressure roller at the outlet with 2 rubber feed rollers – from the bottom: - adjustable infeed table with guide - smooth, metal, sliding roller - 450mm planing roller, 4 knives, 7.5kW - 2 smooth metal feed rollers – from the back: - 2 side spindles 1) vertical, right, 200mm, 6.6kW 2) vertical, left, 200mm, 6.6kW - spindle diameter: 40mm - 2 heads included - spindles adjustable up/down, left/right - axes arranged alternately - electric height adjustment - 2 types of feed speed + stepless 5-13, 13-36m/min - diameter of dust extraction nozzle: 2x125mm, 145mm, 130mm - dimensions (L/W/H): 3200x1740x1650mm + control unit - weight: 2100kg ADVANTAGES – Made in Portugal – Electric table lifting – Ideal for processing wet and dry wood – 2 planing rollers + 2 spindles – Very good condition – Used planer Net price: 48900 PLN Net price: 11643 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7556 Technical specifications: - min / max width of the workpiece 20 / 240mm - min / max height of the workpiece 8 / 160mm - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 toothed feed rollers, including 2 double rollers - 2 smooth rubber withdrawal rollers – from below: - side pressure before and after the roller in the lower bed - toothed feed roller, rotating, in the lower bed before the first spindle - 2 pneumatic side presses - smooth metal withdrawal roller - all rollers are pneumatically pressed - length of the feed bed 2180mm - bed adjustable up/down - central lubrication - electric adjustment of the planing thickness - lifting motor 0.75kW - stepless feed speed adjustment on a frequency inverter 6-30m/min - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet + - diameter of the dust extraction nozzle 4x150mm - dimensions L/W/H 3750x1750x1800mm - weight 3300kg ADVANTAGES – with 4 heads Kedpfxozu R R Ho Ak Aona – ideal for both wet and dry wood – used machine, in perfect condition Net price: 66900 PLN Net price: 15920 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7219 TECHNICAL DATA Knedpfx Akszu R Rmj Aea - max. width of the workpiece: 200mm - max. height of the workpiece: 150mm Number of spindles: 4 1) horizontal, lower: 200mm, 5.5kW 2) vertical, right: 150mm, 4kW 3) vertical, left: 150mm, 4kW 4) horizontal, upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm Top: - 6 feed rollers, toothed, including 2 double rollers - 1 feed-out roller, rubber, double Bottom: - feed roller, toothed, helical, located in the lower table - 3 side pressure rollers - feed-out roller, metal, smooth - all rollers are pneumatically pressed - length of the feed table: 2130mm - table adjustable up/down - central lubrication - electrical adjustment of cutting depth - lifting motor: 1.1kW - stepless feed speed adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle: 4x130mm - dimensions (L/W/H): 3650x1750x1800mm - weight: approx. 3000kg ADVANTAGES – 4 heads – ideal for both wet and dry wood – DTR documentation available – used machine, very good condition Net price: 52900 PLN Net price: 12590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 6393 TECHNICAL DATA - max. width of workpiece: 200mm - max. height of workpiece: 150mm - number of spindles: 4: 1) horizontal lower: 200mm, 5.5kW 2) vertical right: 150mm, 4kW 3) vertical left: 150mm, 4kW 4) horizontal upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm From above: - 6 infeed rollers, toothed, including 2 double rollers - 1 outfeed roller, toothed, rubber From below: - 1 infeed roller, toothed, pulling, swiveling in the lower table - 3 side pressure rollers - 1 outfeed roller, pulling, metal, smooth - all rollers are pneumatically pressed - length of infeed table: 2130mm - table adjustable up/down - central lubrication - electric setting of planing thickness - lifting motor: 1.1kW - stepless feed speed adjustment on inverter - feed motor: 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 4x130mm - dimensions (L/W/H): 3550x1750x1800mm - weight: approx. 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 49900 PLN Net price: 11880 EUR Knodpjzu R N Nefx Ak Aja Net price calculated at an exchange rate of 4.2 PLN/EUR (prices may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7914 TECHNICAL DATA - roller width 640mm - number of knives 4 pcs - max thickness of the workpiece 250mm – from above: - pawls/ejectors - toothed infeed roller, pulling - pressure roller - planing roller - pressure roller - smooth outfeed roller, pulling – from below: - adjustable rollers in the lower bed 2 pcs - motor 7.5kW - electric bed lifting - lifting motor 1.1kW - 2 types of feed speed - feed motor 1.3kW - dimensions L/W/H 1130x1300x1200mm - weight 1026kg ADVANTAGES Kedezu R Hnjpfx Ak Aena – manufactured by the Polish brand JAROMA – electric bed lifting – DTR documentation – used thicknesser, very good condition Net price: 15900 PLN Net price: 3786 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls - geared infeed roller - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds Kodszu R Ekopfx Ak Aena - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm faceplate diameter 3700 mm turning height Max. 2600 mm workpiece weight Max. 35 t Power 80 PS DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Knsdpfxsuddnvo Ak Aoa Side support 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Knodpoygx D Hjfx Ak Aea Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW Kedpouhhzhjfx Ak Aona weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: excellent (used), For sale is a professional measurement station, the Wentworth Laboratories MP-0900, designed for testing and performing measurements on semiconductor components, circuit boards, and microelectronics. The device is equipped with a Wild Heerbrugg Epizoom 1:5 stereoscopic microscope with smooth magnification adjustment and a precise, movable measuring table. The design also features color-coded measurement ports. Ksdezu Tnzjpfx Ak Aena Data from the nameplate: Manufacturer: Wentworth Laboratories, Inc. Model: MP-0900 Serial number: 123A Power supply: 230 V Frequency: 50 Hz Weight: approximately 34.6 kg Wild Heerbrugg microscope – manufactured in Switzerland Used condition, with normal signs of wear visible in the photos.

Condition: excellent (used), Poly-Clip DFC 8162 Automatic Double-Clipper. can fit most vacuum fillers. Suitable for large calibres up to 180mm, electrics in mint condition. Knjdpsxbxxrjfx Ak Aea

Condition: used, Second-hand planer head for back-toothed blades by Ekert, designed for professional woodworking applications. Designed for working with wood using back-toothed blades and suitable for typical planing tasks. Technical data: - Blade: RVZ Z2 Ksdpfezuny Sox Ak Ajna - Cutting circle (ø): 122 mm - Bore: 40 mm - Marking: MEC - Length: 130 mm - Material: Steel

Condition: used, Second-hand Leitz VariPlan planer head for professional use in woodworking. The planer head is designed for machining wood-based materials and is fitted with indexable blades. Suitable for typical planing tasks in industrial and craft production. Technical data: - Blade: Reversible blade Z2 - Flight circle (ø): 125 mm - Bore: 40 mm - Marking: MEC Knjdszunxnjpfx Ak Aja - Length: 170 mm - Material: Steel

Condition: used, Second-hand planer head from Örtli for professional woodworking. The planer head, fitted with reversible blades, is suitable for standard planing tasks and use in woodworking. Technical data: - Blade: Reversible blade - Flight circle (ø): 125 mm - Bore: 40 mm Kedezunwwepfx Ak Asna - Marking: MEC - Length: 130 mm - Material: Aluminium

Condition: used, The second-hand Leitz Type 500 planer head is designed for professional planing work in woodworking. It is fitted with Z4 strip planer blades and is suitable for machining timber workpieces. The steel construction is intended for use on compatible woodworking machines. Technical data: - Blade: Z4 planer blade - Cutting circle (ø): 125 mm - Bore: 40 mm - Length: 230 mm Knjdpfx Aozuniajk Aoa - Material: Steel

Condition: used, Second-hand Weinig Type 530 Centrolock planer head for professional planing work in woodworking. The steel planer head with Centrolock blades is suitable for use on compatible planing machines. The design is intended for the precise and efficient machining of timber workpieces. Technical data: Kedpfxezum Dpj Ak Ajna - Blade: Centrolock Z2 - Flying diameter (ø): 125 mm - Bore: 40 mm - Marking: MEC - Length: 230 mm - Material: Steel

Condition: used, Second-hand Centrolock Weinig Type 530 planer head for professional woodworking. The planer head is used for machining wood and is designed for use in suitable planing machines. Fitted with Centrolock Z2 blades, it is suitable for precise planing work in woodworking. Price per item, Available: 2 Technical data: Kedpszuklqofx Ak Ajna - Blade: Centrolock Z2 - Flight diameter (ø): 125 mm - Bore: 40 mm - Marking: MEC - Length: 130 mm - Material: Steel

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW Knjdpfxjwx R Rdo Ak Asa weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm Kjdpezulu Tsfx Ak Ajna - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue number 7832 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 pcs - max. thickness of processed element: 300mm - digital planing thickness display – from above: - kickback fingers - sequential infeed roller - planing shaft - 2 smooth, driven, metal outfeed rollers – from below: - adjustable rollers in the lower table: 2 pcs - table on 4 screws Knedpfozkrz Eex Ak Aea - motor: 7.5kW - brake - electric table lifting - 2 feed speeds: 7/14m/min - feed motor: 0.75/1.1kW - extraction nozzle diameter: 160mm - dimensions (L/W/H): 1540x1220x1230mm - weight: 1300kg ADVANTAGES – Polish manufacture – electric table lift – sectional feed roller – used thickness planer, very good condition Net price: 32,900 PLN Net price: 7,840 EUR based on 4.2 EUR rate (Prices may change with significant variations in exchange rates)

Condition: excellent (used), Catalog number: 7303 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 3 pcs - Max. thickness of the workpiece: 250mm From above: - Pawls - Toothed infeed shaft, pulling - Pressure rollers - Surfacing shaft - Pressure rollers - Smooth outfeed shaft, pulling From below: - Adjustable rollers in the lower bed: 2 pcs - Motor: 7.5kW - Electric bed lifting - Lifting motor: 0.75kW - 4 feed speed settings - Feed motor: 1.5kW - Diameter of dust extraction nozzle: 140mm - Dimensions (L/W/H): 1120x1250x1680mm - Weight: 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Kodjzkg Tcopfx Ak Ajna Net price: 4738 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to larger fluctuations)

Condition: excellent (used), Catalog number: 8076 TECHNICAL DATA - Roller width: 510mm - Number of knives: 4 pcs - Max. workpiece thickness: 260mm - Digital thickness display - From above: - Chip deflectors - Infeed roller - Planing roller - Pressure roller - Outfeed roller (smooth, pulling, metal) - From below: - Tabletop, mounted on 4 screws - Motor, approx. 5.5kW - Brake Kedpfx Ajzuk Ifsk Ajna - Electric tabletop lifting - 2 feed speed settings: 4/16m/min - Dust extraction port diameter: 140mm - Dimensions (L/W/H): 1000x1100x1100mm - Weight: 562kg ADVANTAGES - Made in Italy - Electric tabletop lifting - Used thickness planer, very good condition Net price: 17900 PLN Net price: 4262 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)