Used Double Grinder for sale (12,574)

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Fpjdpjydk Irsfx Afnoc Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Fpjdpfx Aox A Hggefnoc Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: ready for operation (used), Grinder, Shredder, Moditec G2 ACPS, Used machine Manufacturer : Moditec Type : G2 SACP Overall dimensions : 1400 x 485 x 1500 mm Weight : 340 kg Year : 1995 Fsdjyh H Imopfx Afnspc Electrical data : 400 V ; 1.8 kW Feeding hopper : 420 x 340 mm

Condition: ready for operation (used), Grinder, shredder, Moditec G3S ACP, used machine Manufacturer: Moditec Type: G3S ACP Overall dimensions: 1400 x 480 x 1560 mm Fpsdpfx Asyh D E Njfnjc Weight: 330 kg Year: 2003 Electrical data: 400 V; 2.2 kW Hopper size: 500 x 350 mm

Condition: ready for operation (used), Grinder, shredder, Moditec G3S ACP, used machine Fpedeyh D Eiopfx Afnec Manufacturer: Moditec Type: G3S ACP Overall dimensions: 1400 x 480 x 1560 mm Weight: 330 kg Year: 2003 Electrical data: 400 V; 2.2 kW Hopper size: 500 x 350 mm

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Fpedpfxju Nc Eme Afnjc Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual Fodeu Nigwspfx Afnspc flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Fpjdpfx Afju Ng Nponoc Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Technical details: Fpsdpsu Nfliefx Afnjc pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: good (used), Code: 0228 Brand: OMS SALVARANI Model: 300 INVINCIBILE Pneumatic double croscutting machine for cutting wood, frames, fixtures, joinery, furniture, and various other materials Technical data: Working length mm 3000 Blade diameter mm 300 Motor power Hp 2,5 - Rpm 3000 Manual movement of the 2 heads Cutting from 0 to 45° right and left Pneumatic pedal for lowering the heads N° 2 pneumatic clamps for locking workpieces N° 2 suction ports diameter mm 50 Compressed air 6 bar Overall dimensions mm 4000 x 700 x 1250 h Weight kg 520 Fjdpfx Afjxnxumenspc

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Fsdsuiwqhepfx Afnopc Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: good (used), Code: 0236 Brand: FOM INDUSTRIE Model: BLITZ ALVA 450 - CE Standard Fsdpfx Ajxv Dfaefnepc Double-head electropneumatic sawing machine for cutting and machining aluminium profiles, plastic, light alloys, pvc - CE Standard Useful cutting length mm 4000 Vidia blade diameter mm 450 F32 Three-phase motors Hp 3 - Revolutions/min 2800 Head inclination: 90 degrees - 45 degrees external - 22,5 degrees external - Intermediate graduation with mechanical stop and reading on graduated vernier scale First head fixed Second head mobile: automatic positioning with manual option - Automatic head positioning speed 12 mt/min Movable head positioning accuracy: +/- 0,1 mm Minimum cutting capacity between the two heads: 300 mm Maximum cutting capacity between the two heads: 4000 mm Hydropneumatic blade feed (adjustable output speed - rapid retraction) Vertical and horizontal pneumatic clamps Spray lubrication of the cut Mobile head roller conveyor 3 mt Operating pressure 7 bar Suction mouth diameter mm 100 Overall dimensions mm 5760 x 1600 x 1950 h Weight kg 1550

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication Fpsdpfx Aeg Db U Ajfnjc caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Year of construction: 1991, condition: excellent (used), A. COSTA PUMA 2/60 double-shaft multisaw - Italian production - year of production 1991 TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 45 and 45 kW engines 3 kW feed motor 1.1 kW height adjustment motor Fjdpfxoh Izpcj Afnspc disc diameter max. 300 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm track width 350 mm total power of 94 kW feed control on the inverter automatic central lubrication minimum length of the element 600 mm electric height adjustment electric shaft height adjustment four upper pressure rollers pneumatic clamps five anti-ejection pawls shaft position indicator stub diameter 2 x 220 mm spindle speed 4500 RPM dimensions of the machine (length / width / height) 240/235/210 cm weight ~ 6000 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm Fpodpeq Ii Dlsfx Afnoc linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Year of construction: 2008, condition: excellent (used), Double-head band saw LIGNUMA MM-700/2 PION – Polish production TECHNICAL PARAMETERS: min. diameter of the processed log 150 mm max. diameter of the processed log 600 mm min. length of processed log 1200 mm max. length of processed log 3000 mm input table length 3500 mm main engine 2 x 11 kW feed motor 0.75 kW cutting system adjustment motor 2 x 0.37 kW smooth feed adjustment Fodpfx Afsi Ezwmsnjpc band saw length 4010 mm band saw width 32 - 50 mm band saw thickness 0.9 - 1.25 mm module 22.2 mm cutting thickness programmer hydraulic tensioner of the band saw dimensions (length/width/height) 6000 / 2600 / 2100 mm weight 1700 kg

Condition: used, Mitteltrennschnitt Einrichtung / Centre Cut for Double Production Müller Martini 360 Baujahr / Year 2007 - Serial-No. Fedpfxowryppe Afnjpc For Müller Martini Saddle Stitcher Type 360 - 4/5th trimmer knife attachment Mitteltrennschnitt Einrichtung für Müller Martini Sammelhefter Type 360 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Double-Girder Overhead Travelling Crane, Bridge Crane KONECRANES Type XLD 32t Serial No. 18 / 4363310 Year of manufacture: 2002 Load capacity: 32 tons Span: 5750 mm Lifting height: max. 12.5 meters Girder height: 560 mm (2 bridge crane girders) Travel speed (crane): 20 m/min, infinitely variable via frequency inverter Fpjdox Edq Ispfx Afnsc Trolley travel speed: 16 m/min, stepless via frequency inverter Hoist with double-girder trolley KONECRANES Type XL516N40HDC424B0EE (XL500) Serial No. (hoist): C00204, Year: 2002 Crane classification: DIN 15011 (FEM 1.001) "M4"/"1Am" Rated load: 32 tons Hook path: max. 12.5 meters Main hoist speed: 2.5 m/min Fine hoist speed: 0.42 m/min Trolley gauge: 2400 mm - Trolley with double-girder drive - Equipped with REMOX radio remote control (frequency 434.675 MHz) - Double load hook (twin hook) - Complete cable drag chain for power supply - Electrical control cabinet located on the bridge - Very low operating hours Main hoist motor power: 18 kW Auxiliary hoist motor power: 3 kW Power supply: 400 Volts, 50 Hz Transport dimensions (L x W x H): 6000 x 2450 x 2800 mm Total weight: approx. 5000 kg In very good condition

Condition: ready for operation (used), functionality: fully functional, overall weight: 5,000 kg, total length: 7,860 mm, total width: 2,900 mm, load capacity: 5,000 kg, main lifting speed: 5,000 mm/min, TECHNICAL DETAILS Hoist designation: P 35 Lifting speed: 5 m/min FEM group: 1Cm Load capacity: 5 t Fsdpfx Afeyf Av Dsnjpc Rope/chain: 16 mm Y/W dimension 1: 111 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7,860 x 2,900 x 1,000 mm Net weight: 5,000 kg EQUIPMENT Wireless remote control Test book available Note: Crane runways are not included in the scope of delivery or sale.

Condition: used, axle configuration: 3 axles, first registration: 10/2012, loading space length: 13,620 mm, loading space width: 2,470 mm, loading space height: 2,910 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435 / 50 / R19.5, wheelbase: 8,940 mm, color: white, Year of construction: 2012, General information Model code: ## Axle configuration Tyre size: 435 / 50 / R19.5 Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Weights Empty weight: 7.550 kg Carrying capacity: 33.450 kg GVW: 41.000 kg History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Fpedoyit Tujpfx Afnec Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, functionality: fully functional, machine/vehicle number: WUN HG9, mileage: 47,496 km, power: 120 kW (163.15 HP), first registration: 09/2021, fuel type: diesel, empty load weight: 2,520 kg, maximum load weight: 980 kg, overall weight: 3,500 kg, wheelbase: 4,325 mm, next inspection (TÜV): 12/2027, fuel: diesel, fuel tank capacity: 71 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 7, loading space length: 3,400 mm, loading space width: 2,035 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, electronic stability program (ESP), full service history, hill-start assist, navigation system, onboard computer, power assisted steering, power mirror, soot filter, start-stop system, truck registration, 9147 PAINT COLOUR ARCTIC WHITE MB 9147 A50 Front axle with increased load capacity A11 Control code rear axle, ring gear 215 AR2 Axle ratio i = 3.923 C6L Multifunction steering wheel C907 MODEL SERIES 907 TRANSPORTER VS30 CB1 Suspension for comfort and cargo protection CB7 Stabilization Level I CL1 Steering wheel adjustable for tilt and height E1D Digital radio (DAB) E3M MBUX multimedia system with 7-inch touchscreen F35 Rear wall window F61 Interior mirror F68 Exterior mirrors, heated and electrically adjustable F907 MODEL SERIES 907 TRANSPORTER VS30 FHL DOUBLE CAB FJ1 Folding cover for storage compartment FJ4 Storage compartment under dashboard FM3 WET WIPER SYSTEM GD8 6-speed manual transmission ECO Gear 360 HO0 Warm air duct to passenger compartment H21 Heat-insulating glass with band filter on windscreen HH9 SEMI-AUTOMATICALLY CONTROLLED AIR CONDITIONING TEMPMATIC HI1 Climate zone 1 (cold/comfort) IC1 Model series C907 / C910 Sprinter IEO Model series C907 VS30 RWD IF4 Chassis with double cab IG4 Standard IG5 Basic IR6 Wheelbase 4325 mm, rear overhang 1615 mm IT4 3.5-tonner J1A Seat belt warning for rear bench J55 Seat belt warning for front passenger seat J58 Seat belt warning for driver's seat J65 Outside temperature display JA8 Crosswind Assist JF1 Rain sensor JH3 Communication module (LTE) for digital services JI7 Initial maintenance interval 60,000 km K13 Main tank 71 litres LA2 Light Assist LB1 Side marker lights MG3 Engine OM 651 DE 22 LA 120 kW (163 hp) 3800 rpm MJ8 ECO start/stop function MP6 Engine version Euro VI MQO OBD (On-Board Diagnostics) level D P02 Dropside body with aluminium side walls P47 Front mud flaps P48 Rear mud flaps PZ7 Toolboxes left and right under dropside body Q11 Longitudinal frame reinforcement R65 Spare wheel holder at end of frame RRO Tyres, optimised for rolling resistance RS3 Steel wheels 6.5 J x 16 RX5 Wheel brand Maxion Wheels S22 Armrest for driver's seat S23 Front passenger seat, twin seat S78 Grab handle for inner seat on twin seat SA5 Driver airbag Fodpsyglmbjfx Afnjpc SB1 Comfort driver's seat SK2 Driver's seat occupancy detection T75 Entry grab handles for driver and passenger VF7 Fabric Maturin black X09 Mercedes-Benz MobiloVan with DSB and GgD XV1 Minimum reference mass required 2381 kg Z1N Approval N1 Z4W Manufactured in Ludwigsfelde Z52 ECE version Z75 Reinforced body shell

Year of construction: 1997, condition: used, functionality: unexamined, Emmegi Classic Single TU/4 double head saw with infeed and outfeed roller conveyors, s/n 242937 (1997) This lot is located in Farnworth, Bolton. Collection must be made on Tuesday 3rd March 2026. Fpjdjyg Rfvopfx Afnsc

Condition: used, Year of construction: 2003, functionality: unexamined, Pertici Univer 500D2K double head saw with infeed and outfeed roller conveyors, s/n 03D131 (2003) This lot is located in Farnworth, Bolton. Collection must be made on Tuesday 3rd March 2026. Fpjdpfx Afeyg Rd Ssnec

Condition: used, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 30 %, color: white, Year of construction: 2019, Equipment: ABS, Reference size: 385/65R22.5 Rear axle 1: Tyre tread: 30%; Reduction: single reduction Rear axle 2: Tyre tread: 60%; Reduction: single reduction Rear axle 3: Tyre tread: 50%; Reduction: single reduction Unladen weight: 7,200 kg Payload: 31,800 kg Fedpfjyipz Ujx Afnepc Gross vehicle weight: 39,000 kg Body manufacturer: Krone Damages: none = Company information = Heisterkamp Used Trucks BV does not just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are immediately ready for operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and adhere to the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, Year of construction: 2004, double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! Fpjdpfx Ajdfx Hcofnsc long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)