Used Double Shaft Crushe for sale (18,318)

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm Fjdpfx Asl I Dx Njl Uopn new base frame with steel construction new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils

Condition: excellent (used), tank capacity: 6,000 l, Stainless steel tank, pressure vessel, 6000 l, double-walled Volume: 6000 l Fjdpfx Alsk D T Rto Ujpn 2 units available Agitator Double-walled Unused!!! In very good condition, directly from production!!!

Condition: good (used), overall weight: 41,000 kg, Year of construction: 2004, operating hours: 5,500 h, Single-toggle jaw crusher Inlet: 1,000 x 650 mm Finished product: approx. 0/70-0/200 mm Feed hopper, vibrating feeder Electric drive with 220 kVA generator Side and main discharge conveyor Overhead magnet Fodpfx Aletpaktj Uspn

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg Fpsdpfxouddcgs Al Usn electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: good (used), Here, we offer a used shelf connector for double rows of shelving from the manufacturer Link 51 for sale. The shelf connectors are designed for a shelf spacing of approximately 300 mm. Fjdsd Tymdepfx Al Ujpn Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL The scope of delivery includes: 01x Used shelf connector (consisting of 2 profiles) Suitable for: Double rows of shelving Material color: anthracite Overall length: approx. 415 mm Shelf spacing: approx. 300 mm U-profile: approx. 27 x 30 mm Weight/piece: approx. 1.092 kg/piece 04x Hex head screws, M8 x 45 04x Hex nuts, M8 04x Washers, M8

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table Fpedpfequp Anjx Al Usn - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: excellent (used), We have 3 x identical MR600 mixers for sale. All bought new in 2016, available with optional tote bin hoists. These are in beautiful condition and available to buy straight away. Fodpsn Tr Stjfx Al Uopn

Year of construction: 2025, condition: new, functionality: fully functional, With stainless steel square tube frame 15 pressing rollers 2 press nipps Electrical powerd with stepless speed regulation Belt width 1500mm High pressure belt cleaning integrated Nominal capacity up to 15.000 kg/h (depending on fruits & operating condition) Fjdpfx Aeclt Sbjl Uepn

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, Effective cutting length: 4000 mm Blade diameter: 500 mm Electronic tilting of the inner/outer saw heads Tilting range: 22.5° to 135° Fodpfx Alezrhuwo Uepn

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm ram surface 150 mm speed down 200 mm/s speed up 200 mm/s working speed 20 mm/s oil volume 115 l power requirement 5,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m Fpedpfx Aezrptbol Usn with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm Fedpfx Alozrptno Uspn pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Fpodozrpt Ijpfx Al Usn Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, WEINIG pot-type pendulum shaft for use in Weinig planing machines Fpedpfjzrxlysx Al Uen Technical data: - Overall length: 266 mm - Diameter: 35 mm

Condition: excellent (used), Year of construction: 2018, - for unattended operation - for temperatures from 100 °C to 300 °C - external dimensions: 1500 x 2773 x 2096 mm (W x H x L) - clear internal dimensions per chamber: 800 x 800 x 1100 mm (W x H x L), height with beams = 700 mm Fpjdpfezbnnwjx Al Usn - maximum batch dimensions: 700 x 600 x 1000 mm (W x H x L); maximum weight: 500 kg Connection values per chamber: circulation = 3.0 kW (1 unit); electric heating = 30 kW (1 control group) Temperature accuracy +/- 5 K at 150 °C, 250 °C, 300 °C adjustable up to +/- 1.5 K temperature accuracy depending on the batch geometry 1 Protherm 500 program controller

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. Fpodjzl E N Ejpfx Al Ujn The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm capacity of ejector 5 t ejector stroke 15 mm ram surface 590 x 450 mm power requirement 22,0 kW Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Nominal force travel 1,46 mm Fodpfxjzl E Saj Al Uspn With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: like new (used), Double-sided profiling milling and grinding machine, model Uinze 4T2500STD - Year of manufacture: 2023 - New price: €64,000 - Machine is equipped with 2 special carbide milling heads and 2 grinding units - Weight: 4300 kg - Safety fence: 800 kg, safety roller gate: 300 kg - Working length: 2500 mm, working width: 170 mm - Motor power: milling unit 4.5 kW, grinding unit 4.5 kW - Table return speed: 80-100 m/min Fjdpjzqgmcofx Al Uopn - Milling speed: 4000 rpm

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) Fedpszphf Djfx Al Uspn The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Price on request. We will be happy to advise you – competent advice and nationwide service.

Condition: used, functionality: fully functional, Usable cutting length: 4000 mm Fedozcf Rxspfx Al Uepn Blade diameter: 450 mm Pneumatic tilting of the cutting heads: 90-45/20°

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm Fpsdpfx Alex Ug Ds Usn seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Condition: used, Technical specifications: Max. blade diameter: 300 mm Max. cutting height: 110 mm Max. cutting width: 140 mm Max. workpiece length: 2800 mm Adjustable blade angle up to 45° Pneumatic clamping Pneumatic blade lifting Operating pressure: 6 bar Safety switch Power supply: 400 V Motor power: 2 x 3 kW Fodpfozkh Dpox Al Uspn Overall dimensions: Length: 3600 mm Width: 900 mm Height: 1450 mm

Condition: like new (used), functionality: fully functional, machine/vehicle number: Crafter DokaL3, mileage: 50,000 km, power: 103 kW (140.04 HP), first registration: 05/2021, fuel type: diesel, empty load weight: 2,227 kg, maximum load weight: 1,273 kg, overall weight: 3,500 kg, wheelbase: 4,490 mm, next inspection (TÜV): 09/2028, fuel: diesel, CO₂ emissions: 208 g/km, fuel consumption (urban): 8.7 l/100km, fuel consumption (extra-urban): 7.5 l/100km, fuel consumption (combined): 7.9 l/100km, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 7, total length: 7,004 mm, total width: 2,098 mm, total height: 2,321 mm, loading space length: 3,500 mm, loading space width: 2,040 mm, loading space height: 400 mm, Year of construction: 2021, operation weight: 2,227 kg, number of previous owners: 1, chassis manufacturer: VW, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, all-season tires, car registration, central locking, differential lock, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, immobilizer system, onboard computer, power assisted steering, power mirror, soot filter, start-stop system, traction control, trailer coupling, truck registration, Crafter double cab with flatbed, original 50,000 km, in excellent condition +++ Not a rental vehicle, not used for parcel delivery +++ Euro 6 emission standard - green low emission sticker Engine: 2.0 TDI - 103 kW / 140 hp AD-BLUE technology Start & Stop system Wheelbase L3: 4490 mm Air conditioning Rear view camera 7 seats in leather - co-driver's double seat with folding table Driver's seat height-adjustable + armrest and lumbar support Airbag Audio Composition with USB + SD + AUX Bluetooth hands-free system Voice control for multimedia Multi-function steering wheel, height-adjustable Central locking with remote control Electrically adjustable and heated exterior mirrors Electric windows ABS - Anti-lock braking system ESP - Electronic Stability Program ASR - Anti-slip control EDS - Electronic differential lock Brake assist with electronic brake force distribution Hill start assist Fpedpfszypm Rsx Al Uon On-board computer Outside temperature display Daytime running lights Opening windows in the rear doors Side marker lights Heat-insulating glazing Storage compartments under the co-driver's seat and rear bench Storage compartments above the windshield Storage gallery on the dashboard 6-speed manual transmission Front-wheel drive Full-size spare wheel Ladder rack / rear wall protection Wooden loading floor with lashing eyes for securing the load Vehicle overall length: 7004 mm Cargo area dimensions: 3.50 m long, 2.04 m wide, 0.40 m high Permissible total weight: 3500 kg Payload: 1273 kg Trailer hitch with 3000 kg trailer load Trailer load can be increased to 3500 kg Vehicle has all-season tires, approx. 50% tread Complete service history, service recently done MOT + emissions test valid until 07/2028, can also be renewed upon delivery Clean German vehicle in good condition, from first owner Truck net price: €29,900 Typographical errors, errors and prior sale are subject to change. We also offer affordable financing options and warranties up to 24 months, even for commercial users.

Condition: used, functionality: fully functional, The IBD Wickeltechnik industrial unwinding-shaft assembly is designed to support and controllably unwind rolls of web material. It incorporates an unwinding shaft supported by KL.S-series foot-mounted safety chucks, a CX.250.4 single-disc pneumatic brake, and forced cooling from a 24 V DC fan. The safety chucks allow for rapid shaft loading and removal, while the locked closure secures the journal during operation. The brake uses four pneumatic calipers, a 250 mm self-ventilating cast-iron disc, and a modular design that enables control of the braking torque through air pressure. The assembly is mounted on an adjustable, wheeled steel transport frame. Manufacturer: IBD Wickeltechnik GmbH Device type: industrial unwinding-shaft assembly with pneumatic brake Safety chuck model: IBD-KL.S.O.1800.0380.1.40.VT Safety chuck series: KL.S Safety chuck configuration: foot-mounted Maximum shaft and roll weight: 1800 kg Maximum safety chuck torque: 380 Nm Fedpfx Aozw Uilol Uepn Square journal range: 30–40 mm Triangular journal size: 36 mm Brake model: CX.250.04.28.0/V.24 Brake type: pneumatic, single-disc, air-cooled Number of brake calipers: 4 Brake disc diameter: 250 mm Disc material: cast iron Minimum braking torque: 6 Nm at 0.2 bar Maximum braking torque: 640 Nm at 6 bar Maximum permissible brake speed: 2500 rpm Fan voltage: 24 V DC Safety chuck serial number: 6800.37879.1/47.18 Brake serial number: 6800.37879.12/47.18

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, JWV service is proud to present the new Carif 260 Auto. Fpodpozlf Dcjfx Al Uon This fully automatic and compact bandsaw machine is manufactured in Italy using European components. As the importer, we can arrange a demonstration of the machine at your location.

Condition: good (used), Offer 25475 Manual double unwind/rewind reel Technical data: Fpjdozkhbnjpfx Al Usn - Coil weight, left + right, up to approx. 1 t - Coil width, each side, up to approx. 300 mm - Coil inner diameter, approx. 380 to 500 mm - Coil outer diameter, up to approx. 1250 mm - Arbor height, approx. 750 mm - Space requirement, approx. W 1250 x D 900 x H 1300 mm - Weight, approx. 200 kg