Used Down Stroke Dare for sale (7,563)

Condition: used, Used PRODUKT CZ model PS-LINE automatic filling and closing machine suitable for liquid or paste products. The device is suitable for filling into glass bottles and works in this working strokes: - Manual placing of bottles on the conveyor. - Automatic locking of bottles under the filling nozzles - Automatic loading of the nozzles into the neck of the bottles - Automatic filling of bottles with product (PRODFILL PS-1500/IV/L linear filling machine) - Automatic nozzle removal from packaging - Release of the stoppers and removal of the bottles from the filling position Ndodpfjxm T Hnex Agzec - Capping (automatic/manual) - Automatic locking of bottles in the closing position - Automatic cap closure (PRODSCREW ZS-1500/L/S screw cap closure device) - Release of stops and removal of bottles from the closing position - Automatic application of self-adhesive label (PRODLABEL ES-1500/L/R self-adhesive label applicator) - Moving from the labelling position Line has been dismantled, attached photos are from previous installation.

Condition: used, bore capacity in steel (diameter) / mm Ndsdpfsxqrhfsx Agzoc throat / mm bore stroke / mm total power requirement / kW

Condition: ready for operation (used), empty load weight: 1,800 kg, total length: 1,200 mm, total height: 1,500 mm, 300 x 300 mm force: 45 ton Capacity: 10 mm Strokes/min: 45 str/min Fixed angle -- variable angle: fixed Nodpfx Agexpymgezodc Workspace: 1200 x 770 mm Electric motor (power): 10 hp Depht: 1500 mm

Condition: new, with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. Nsdpfewv Tqbjx Agzedc - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,105 mm, Tooling package  Chip conveyor Samchully 3 chuck 400 mm with jaws Max. turning Ø: 790mm X-Axis: 352mm Z-Axis: 1105mm Spindle bore: 116.5mm Speedrange: 2000Rpm Spindle power: 37kW ATC / revolver: 10 Speed live tools:4000Rpm Nedpfxowyun Ae Agzedc Power live tools:25kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 6Mk Stroke pinole: 120mm Quill Ø: 120mm Workpiece load: 1700 Length: 4600mm Width: 2056mm Height: 2195mm Weight: 11050kg

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 2600 kg Control Unit Brand FANUC Model 18i-W Ndjdoxq Hrlspfx Agzsc Movement X-Axis Movement 520 mm X-Axis Rapid Traverse 900 mm/min Y-Axis Movement 370 mm Y-Axis Rapid Traverse 900 mm/min Z-Axis Movement 310 mm Z-Axis Rapid Traverse 900 mm/min V-Axis Movement 120 mm V-Axis Rapid Traverse 450 mm/min U-Axis Movement 120 mm U-Axis Rapid Traverse 450 mm/min This FANUC Robocut Alpha 1ia was manufactured in 2001. It is a wire EDM machine featuring a large stroke with X: 520 mm, Y: 370 mm, and Z: 310 mm. It can handle a workpiece mass up to 1000 kg and requires a power supply of 13 KVA. Consider the opportunity to buy this FANUC Robocut Alpha 1ia wire edm machine. Contact us for more information. Application Types EDM

Condition: excellent (used), Year of construction: 2014, operating hours: 29,497 h, functionality: fully functional, machine/vehicle number: 230240, clamping force: 2,000 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Here, as a dealer specializing in injection moulding machinery, we are offering the following well-maintained used injection moulding machine: Naturally, we also purchase well-maintained injection moulding machines from model year 2010 onward. We have been a leading wholesaler of used injection moulding machines for over 25 years. Important notice – Tax advantage for used machines: From 01.07.2025, used machines can also benefit from a special depreciation scheme of 30% annually. In addition to the lower purchase price compared to new machinery, you can utilize the same depreciation allowances as with new machines (see: 'Growth Booster', (§ 7 paragraph 2 EStG-E)). Offered Machine: Nedpfx Aeuuf Iaegzsdc Arburg 1500T 2000-400 Vertical Rotary Table Machine Machine No. 225999 A full list of equipment is available in the downloadable documents (machine card). Control: Selogica Year of manufacture: 2013 • Total machine cycles: only 1,907,296 • Automatic operation hours: 42,160 Clamping Unit • Distance between platens: 700 mm • Clamping force: 200 t / 2000 kN • Mould installation height: 400 mm • Table diameter: 1500 mm • Rotary angle: 180° • Rotation time: 2.4 s min. • Maximum weight on rotary table: 1,050 kg • Ejector force: 45 kN / 175 mm stroke Injection Unit • Screw diameter: 40 mm • Shot volume: 201 ccm • Injection weight: 184 g • Injection pressure: 2,000 bar Extras • 2-station rotary table, 180° forward/reverse alternating operation with servo-electric rotary drive and hydraulic locking pin for fine-centering of the rotary plate in end position; separating guard between clamping and loading areas, the height on the rotary plate adjustable to suit the mould bases, with media lines and connections for the mould bases • Rotary table diameter: 1500 mm • Max. clamping force: 2000 kN • Injection unit according to EUROMAP 400 • Screw diameter: 40 mm • Special ergonomic rotary table version with the following features: - Corrosion protection treatment for rotary table (VE 574/90) - Water connections: 2 circuits - 3 hydraulic connections for needle shut-off system - 3 core pulls - Per station: one core pull and 2 x tempering - 6 x mould temperature control - 12 control zones for mould heating circuits - 2 x Kistler cavity pressure sensors - Temperature monitoring for start-up components • Weight: 11,200 kg • Power: 22 kW motor – heating power 9.4 kW (5 zones) – connected load 100 A The machine is offered fully tested for functionality, fully operational with a start-up guarantee – tested before dismantling. About our company and offered machines: - We only sell our own machines purchased from current production, from our warehouse in Hannover. - All offered machines are tested before dismantling. - We DO NOT deal with insolvency goods – we are NOT brokers trading in third-party property. - All machines stem from successful businesses with a proven maintenance and servicing record. - All listed machines can be inspected at our warehouse.

Condition: excellent (used), operating hours: 49,130 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 42 mm, displacement volume: 214 cm³, injection pressure: 1,724 bar, ejector force: 20,400 N, ejector stroke: 130 mm, plate length: 610 mm, plate width: 635 mm, total length: 4,370 mm, total width: 1,210 mm, total height: 2,200 mm, overall weight: 3,730 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 725 mm, Equipment: documentation/manual, warehouse no.: 503452 manufacturer: BOY type: 90 E controller: Procan ALPHA year of construction: 2012 operation hours: 49130 h Nsdpfx Ajxqc Hfogzjdc clamping force: 900 kN distance between tie-bars h x v: 430 x 360 mm size of mould plates h x v: 635 x 610 mm min. mould height: 250 mm max. open daylight: 725 mm opening stroke: 475 mm screw diameter: 42 mm swept volume: 214.7 ccm injection pressure: 1724 bar screw length: 20 l/d screw stroke: 155 mm screw speed: 280 min screw torque: 700 N plasticising rate: 136 g/s PS number of heating zones: 4 nozzle stroke: 250 mm equipment included screen text german core pulling hydraulically 1x machine without material hopper machine without water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB measures of machine l x w x h: 4.37m x 1.21m x 2.2m total weight: 3730KG

Condition: used, Used 5.9 MW Wartsila Vasa 18V32DF dual fuel cogeneration plant built in 1998 with ABB HSG 900 LS8 generator. Plant includes: Nodpfx Aow U A I Eogzedc - Wartsila VASA 18V32DF engine. This is a turbo-charged, intercooled four stroke gas engine with direct pilot fuel injection with the following specifications: Vee configuration, 18 cylinders, 320mm cylinder bore, 350mm stroke, 750 rpm, 2 inlet valves/cylinder, 2 outlet valves/cylinder, clockwise rotation and nominal output of 5901 kWm. - ABB HSG 900 LS8 generator. This is a self-cooled, 3-phase, brushless, synchronous, two bearing type generator with the following specifications: 7235 kVA, 0.8 power factor, 11000 V, 380 A, 50 Hz, 750 RPM, 900 RPM, insulation class F, IP21 protection and IEC34 standard.

Condition: used, Year of construction: 2006, centre height 165 mm centre distance 750 mm turning diameter over bed 320 mm turning diameter over slide 150 mm turning length 750 mm spindle taper KK 6 DIN 55027 control MANUALplus 4110 HEIDENHAIN bed width 360 mm spindle bore 50,8 mm turning speed range 10 - 4000 U/min rapid travel - longitudinal/face 10 / 8 m/min 3-jaw-chuck diameter 200 mm SCHUNK quick change toolholder MULTIFIX Typ B drive capacity - spindle motor 9 kW taper in tailstock-quill MK 5 dia. of quill 70 mm quill stroke 120 mm voltage 400 V total power requirement 14 kVA weight of the machine ca. 2,0 t dimensions of the machine ca. 2,45 x 2,10 x 1,85 m Machine from training department. Only 4.488 Power-On hours! Excellent condition! - Serial No.: Power On: 4.488 h - CNC-Control MANUALplus 4110 Nsdoxqrdgopfx Agzodc - 3-Jaw-Chuck (Wedge type) SCHUNK ROTA-Plus 200-52 - Quick change tool holders MULTIFIX Size B - Coolant equipment - 2-step spindel gear

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of Nodjxabm Njpfx Agzodc 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 18000 kg Clamping Unit Clamping force 2200 kN Opening stroke Max. 350 mm Njdjxq Hugspfx Agzsdc This AMADA HFP NT 220-4L press was manufactured in 2011. It features a maximum press force of 2200 kN and a stroke up to 350 mm, weighing 18000 kg. A robust choice for heavy-duty operations, the AMADA HFP NT 220-4L machine we have for sale is ideal for your pressing needs. Contact us for more information. Application Types Bending

Condition: used, Table diameter: 800 mm, 3-jaw chuck, diameter: 400 mm, machine lamp, stroke: approx. 600 mm Nedpfxoxpy Hgo Agzsdc

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, warehouse no.: 503615 manufacturer: ARBURG type: Allrounder 375 V 500-170 controller: Selogica-direkt year of construction: 2013 operation hours: 36163 h Nsdpfx Asxqc A Tjgzjdc clamping force: 500 kN min. mould height: 200 mm max. mould height: 550 mm max. open daylight: 302 mm opening stroke: 225 mm round table diameter: 900 mm screw diameter: 25 mm swept volume: 59 ccm injection pressure: 2500 bar equipment included: screen text german rotary table Anti vibration mounts measures of machine l x w x h: 2.524m x 1.48m x 3.53m total weight: 3111KG

Condition: good (used), Year of construction: 1970, Data : Power 6 tons Stroke rate 220 / min Stroke adjustment 6 - 60 mm Nsdpfexq R Abex Agzedc Projection approx. 120 mm Installation height without clamping plate approx. mm Table approx. 400 x 200 mm Weight approx. 0.3 tons Motor 0.7 HP

Condition: used, Year of construction: 2014, operating hours: 4,474 h, load capacity: 3,500 kg, lifting height: 3,754 mm, fuel type: electric, construction height: 2,165 mm, Equipment: cabin, Electric forklift, load capacity approx. 3500 kg, height of mast extended: 3754 mm, stroke: 2995 mm, comfortable driver's cabin, 3.5? LED color display with steering angle and tilt angle display, online data transfer, two-motor front-wheel drive, overhead tilt cylinder, fork length: 1480 mm, AXIMA battery charger, type: Flexis 80D75, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Njdpfx Agjvnnu Hjzodc Please contact us!

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg Njdpfx Aexaa Thegzedc range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Scope of delivery: - Table extension - Rubber rollers With veneer edge sanding device with contact shoe With fine adjustment and fence rulers With grooved infeed fence for veneer overhangs Quick switch between veneer edge and solid wood sanding possible Approximate dimensions: Length (product): 1900 mm Width/Depth (product): 900 mm Height (product): 1350 mm Net weight: approx. 290 kg Oscillation motor power: 0.25 kW Extraction port diameter: 140 / 100 mm Height adjustment of longitudinal table: 230 mm Min. cross table height: 720 mm Working table length: 960 mm Working table width: 350 mm Working table height adjustment: 230 mm Connection voltage: 400 V Phase(s): 3-phase Current type: AC Mains frequency: 50 Hz Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt running speed(s): 20 m/s Oscillation stroke: 20 mm Sanding surface length: 1050 mm Nsdpjw I Up Ujfx Agzodc Sanding surface width: 200 mm Includes: 1 pack sanding belts K 80 1 pack sanding belts K 120 Availability: short-term Location: Hochheim

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Clamping force 420 kN Ndedpexpyt Hjfx Agzjc Ejector stroke 230 mm Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2013, operating hours: 32,768 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 42 mm, clearance between the columns: 635 mm, displacement volume: 214 cm³, injection pressure: 1,724 bar, total length: 4,370 mm, total width: 1,210 mm, total height: 2,200 mm, overall weight: 3,730 kg, Equipment: documentation/manual, warehouse no.: 503581 manufacturer: BOY type: 90 E controller: Procan ALPHA 2 year of construction: 2013 operation hours: 32768 h clamping force: 900 kN distance between tie-bars h x v: 430 x 360 mm size of mould plates h x v: 635 x 610 mm min. mould height: 250 mm max. open daylight: 725 mm opening stroke: 475 mm screw diameter: 42 mm swept volume: 214.7 ccm Ndjdjxqc Ayopfx Agzsc injection pressure: 1724 bar screw length: 20 l/d screw stroke: 155 mm screw speed: 280 min screw torque: 700 N plasticising rate: 136 g/s PS number of heating zones: 4 nozzle stroke: 250 mm equipment included screen text german screen text english screen text french Screentext Multi-Language Screen text Spanish Anti vibration mounts interface for ethernet interface robot EUROMAP 67 interface RS 232 interface USB measures of machine l x w x h: 4.37m x 1.21m x 2.2m total weight: 3730KG

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Nedsxq Rz Rspfx Agzjdc Motor power: 30 HP

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, back gauge: 1,000 mm, power: 30 kW (40.79 HP), total length: 3,400 mm, total width: 3,900 mm, total height: 2,800 mm, empty load weight: 22,300 kg, workpiece length (max.): 3,100 mm, passage width: 3,400 mm, throat depth: 300 mm, digital readout for backgauge retractable backgauge Ndodexpkilepfx Agzsc Optional: upgrade to CNC control Strokes/min: 7 > 30 str/min Adjustable cuttingedge: 0,5 > 3°

Condition: good (used), Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, displacement volume: 5,655 cm³, ejector force: 118,000 N, ejector stroke: 300 mm, plate length: 1,690 mm, plate width: 1,960 mm, total height: 2,500 mm, overall weight: 76,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503007 manufacturer: BATTENFELD Nedoxqc Agspfx Agzedc type: HM 10000-9200 controller: UNILOG B4 year of construction: 2003 operation hours: 67092 h clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm opening stroke: 1100 mm screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar equipment included: screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 interface for temperature control units increased oil cooler mould heating 16x measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, back gauge: 1,000 mm, power: 37 kW (50.31 HP), empty load weight: 37,000 kg, workpiece length (max.): 4,050 mm, passage width: 4,350 mm, throat depth: 300 mm, LVD MVCS 4050 x 20 mm Strokes/min: 5 > 20 str/min Ndsdjxpki Sopfx Agzoc Adjustable cutting device: 0,1 > 1,9 Adjustable cuttingedge: 0,5 > 3°

Condition: ready for operation (used), Fabrication line for production of metal racks 14 stations: double driven Axle Ø 80 mm station lt;- station: 400 mm adjustable centerdistance axles: min 100mm; max 280mm max feedingwidth: 780 mm Nedexpkkvjpfx Agzsdc max thickness: 3 mm steel Including: - Colombo excenter Press 100 ton for punching Stroke: 150 mm 16.5 hp Table: 600 x 1000 mm Stroke/min: adjustable from 30 - 90 str/ min - 4 column press on rails acting as flying shear Table 400 x 400 mm - Unloading table Work mode: Roll forming unit Material thickness x width: W 780 mm Max Numbre of sections: 14 stations axle Ø80mm PUNCHING MACHINE: Punching press CUTTING DEVICE: Flying Shear Conveyor: Yes