Used Drag Finishing Machine for sale (84,349)

Condition: new, Year of construction: 2017, operating hours: 25 h, functionality: fully functional, saw band length: 520 mm, saw band width: 580 mm, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 380 V, New machine. Kjdpounia Hofx Ab Uodw

Condition: as good as new (ex-display), functionality: fully functional, Table size 540 x 250 mm Max table travel 560 x 260 mm Max distance from table to spindle center 450 mm Table slide-way Double-V rail Feed of cross handwheel, per revolution 5 mm Feed of cross handwheel, pe graduation 0,02 mm Feed of vertical handwheel per revolution 1,25 mm Feed of vertical handwheel per graduation 0,01 mm Wheel speed (50 Hz) 2850 rpm Wheel speed (60 Hz) 3440 rpm Wheel size 200x31,75x20 mm Power of spindle motor 1500 W Hydraulic station motor 1500 W Working pressure 3 Mpa Max runoff 18 L/min Fuel tank capacity 80 L Coolant pump 40 W Machine's net weight 900 kg Size 1,80x1,40x1,80 m Kjdpfxou Hzg Rs Ab Uedw Robust and reliable construction. Zero working hours Price should remain the same till end of December.

Condition: excellent (used), Year of construction: 2020, Machines for the production of medical masks type llr , ffp2. Price per piece. Kdjdpfor Iydyox Ab Uow

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89037, workpiece weight (max.): 13,000 kg, PARALLEL LATHE CWGIIOOE 500x5000mm weight 13000kg. Machine complete with 4 independent jaw self-centering chuck mm 1000. Kodpfx Abjvzxato Uedw Height of tips mm 500. Distance between tips mm 5000.

Condition: new, functionality: fully functional, Year of construction: 2025, The GREENBULL 510 is a trailed implement. Its PTO drive powers a high-performance fan, capable of providing 20 meters of coverage on both sides. Both the track width and axle height are adjustable in two positions, allowing the machine to be configured to the specific dimensions of the area requiring protection. The unit is designed with simplicity in mind, ensuring cost-efficiency and operational effectiveness go hand in hand. Its performance is unmatched within this segment, as operating temperatures do not require limitation—even under severe frost conditions. Machine Specifications: - Length: 4450 mm - Width: 1750 mm - Height: 1730 mm - Weight (without pellets and water): 1300 kg - Maximum coverage: 7–10 hectares - Average pellet consumption: 100–150 kg/hour - Minimum tractor power requirement: 65 HP - Water tank capacity: 420 liters - Pellet tank capacity: 500 kg - Adjustable ground clearance: 2-step setting - Adjustable track width Kjdpew Dqkbsfx Ab Uedw Advantages of the frost protection machine: - Enhanced crop yield through effective frost protection - Adjustable track width and ground clearance for flexible adaptation - User-friendly; operation possible by a single person - Shields against both radiation and advection frost - Trailed construction for ease of transport and field deployment - No leaf scorch due to the protective water curtain - Highly economical with low operational costs - Temperature control accessible from the tractor cab - Favorable maintenance costs - Environmentally friendly – operates on biomass pellets - Does not require permits (construction or environmental authorization not needed)

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS MADE IN ITALY Kjdpfx Asfgl Aqsb Usdw

Condition: new, Year of construction: 2025, total height: 2,100 mm, total length: 8,500 mm, total width: 1,400 mm, overall weight: 1,850 kg, working height: 900 mm, The machine is engineered to handle the connection nuts of solar panel frames, executing drilling, tapping, and cutting operations concurrently within a singular unit. Thanks to the simultaneous processing of four profiles, it allows for the production of one nut every 1.5 seconds. Ksdsvvkvpjpfx Ab Ujdw Please contact us for detailed informations.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. Kedpfev S Dk Sjx Ab Uedw The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 1.5 kW (2.04 HP), load capacity: 5,000 kg, Overturn capacity:5T Table Height:580mm Table Size:1200*1200mm Motor Power:1.5Kw Machine Dimension: 2130*1200*1780mm SXKH adopted European design, the machine is used to make the mold & die reverse at 90 degree. There are some advantages of the machine, such as heavy weight of overturning, the smooth and stable overturning of the inverted goods, reducing the damage of molds when they are being overturned and reducing the damage of movements and the grounds, which makes the overturning process fast and convenient and makes the safe and civilized production. Kdedpfx Abjuhcdqe Usw

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment Kdodpfx Abjtr Azke Uew machine testing available The roundness within 0.001

Condition: used, BROACHING MACHINE Kjdpfet Hr Dfex Ab Usdw

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Kodpfxsv S Dihe Ab Uedw After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. Kjdpjv Sa I Tefx Ab Usdw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 11598, controller model: SIEMENS 840D, laser power: 2,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF laser cutting system including LoadMaster! Submitting a bid requires collection by the deadline at the end of November! TECHNICAL DETAILS Axes X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Working area: 3,000 x 1,500 mm Laser and Power Laser output: 2,400 W Laser unit: TLF 2400 TURBO MACHINE DETAILS Control: SIEMENS 840D Electrical Data Mains connection: 400 V / 50 Hz Connected load: 71 kVA Control voltage: 24 V Main fuse: 3 × 125 A Compressed Air and Gas Connections Ksdpfxjxu Ihie Ab Uedw Compressed air connection: 6 bar Nitrogen (N₂) connection: 30 bar Oxygen (O₂) connection: 20 bar Dimensions & Weight Dimensions (L x W x H): 9,800 x 5,300 x 2,000 mm Weight: 11,500 kg EQUIPMENT LoadMaster

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, Original purchase price of the printer was €486,000 net! The machine was relocated to ensure smooth processing. The auction end date has been postponed to 26.11.2025 due to increased demand for current images. TECHNICAL DETAILS Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly print capacity: 1,500,000 pages Kjdpfxjxtalks Ab Usdw Supported paper sizes min.: 182 × 182 mm Supported paper sizes max.: 330.2 × 487.7 mm Paper weight range: 60 gsm to 350 gsm Paper weight range (with validation): up to 400 gsm Duplex printing media weight: 350 gsm MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Dimensions main unit C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm FEATURES Offset-like print quality Compatible with specialty and textured media In-line sensors for color management Automatic calibration

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220.01.016.22, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, rotary table diameter: 750 mm, rotational speed (max.): 12,000 rpm, The machine is being auctioned due to a business closure! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edge banding material (coil): 0.4–3 mm Rotary table diameter for coil edge material: 740 mm Support surface (workpiece infeed): 600 mm Spindle speed of diamond pre-milling unit: 12,000 rpm Feed speed, chain feed: 10 and 18 m/min Spindle speed, cross-cut saw unit: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW Ksdpfoxwt Nqjx Ab Ujdw EQUIPMENT Ball bearing rotary table for edge banding coil material Workpiece infeed and feed fence with manual adjustment Chain feed with two speeds Edge feeding for coil and strip material in single feed Upper and lower multifunctional milling unit x-motion PLUS via smartouch Upper and lower radius scraper blade x-motion PLUS Corner rounding unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing units Pneumatic-mechanical infeed stop for workpiece gap monitoring glueBox application unit

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 06601, feed rate X-axis: 12 m/min, empty load weight: 2,500 kg, Equipment: CE marking, TECHNICAL DETAILS Maximum edge banding thickness: 12 mm Minimum workpiece thickness: 10 mm Maximum thickness of roll material: 3 mm Feed speed: 12 m/min Heating time: 10 min Guillotine for trimming: 0.2 – 3.0 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,500 x 1,000 x 1,600 mm Weight: 2,500 kg EQUIPMENT Jointing unit with 2 milling units Automatic roll magazine Solid edge magazine Pre-heating of panels by infrared heater Automatic gluing with granulate glue pot Cross-cut saw with programmable angle setting Multi-function unit Kjdpfx Ajxuqwmsb Uedw Corner rounding/copying unit with 2 motors Profile scraper Flat scraper Buffing unit Unit indicator with mechanical numeric display Control via operator panel Operation via selector switch / push buttons Protective hood CE marking

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 199583, clamping force: 1,800 kN, screw diameter: 35 mm, injection pressure: 1,595 bar, ejector force: 80,000 N, opening stroke: 1,050 mm, TECHNICAL DETAILS Clamping force: 1,800 kN Platen size (H x V): 880 x 830 mm Minimum mold height: 300 mm Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection unit Screw diameter: 35 mm Shot volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar Injection rate: 151 cm³/s Nozzle stroke: 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,720 x 1,350 x 2,020 mm Net weight (incl. control cabinet): 11.7 t EQUIPMENT ENGEL ecodrive SHV2 (servo-hydraulic drive) Kjdpsxuqh Sofx Ab Ujdw Quick-clamping system Core pull control Thermoset package ENGEL Viper 40 robot integrated with RC200-A03 control ROTOFEEDER BMC50 with frequency converter and dedicated programming interface Microcomputer CC200 with 15'' TFT color touchscreen

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 207000044, paper weight (min.): 50 g/m², paper weight (max.): 300 g/m², production capacity: 19,680 unit/h, The original price of the printer was EUR 143,250! The machine has been relocated to ensure smooth handling. The auction end date has been extended to 26.11.2025 due to increased demand for up-to-date photos. Production printer with the following configuration: - Input Interface Module-B1 - Standard Paper Input Module-B1 - Optional Paper Input Module-B1 - Océ iHCS2.1 TopCover-B2 TECHNICAL DETAILS Print speed A4: up to 328 pages/minute Print speed A3: up to 171 pages/minute Maximum monthly print volume: up to 10,000,000 A4 pages Resolution: 600 x 1,200 dpi Paper specifications: Total paper weight range: 50 g/m² – 300 g/m² Plain paper (Canon recommended media): 50 – 300 g/m² Coated media (Canon recommended media): 80 – 250 g/m² Paper size: 203 x 203 mm to 350 x 500 mm Kdsdpfoxtacvjx Ab Usw MACHINE DETAILS Main unit dimensions (W x D x H): 1,439 x 1,070 x 1,225 mm Main unit weight: 779 kg Meter readings: A4 simplex: 173,028 A4 duplex: 58,200,255 A3 simplex: 11 A3 duplex: 3,424 SYSTEM CONFIGURATION - 4x Paper Input Modules - 8x Duo Paper Tray - 2x High Capacity Stacker - Remote Manager - PCL, IPDS, PostScript - Streaming & PrismaSync

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 80709, plate height: 45 mm, empty load weight: 2,900 kg, operating speed: 333 mm/s, Equipment: CE marking, TECHNICAL DETAILS Maximum panel thickness: 45 mm Edge band thickness: 13-60 mm Maximum edge material thickness in rolls: 3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Working speed: 10 - 20 m/min MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,950 mm x 1,700 mm x 1,530 mm Kjdpjxuqufjfx Ab Ujdw Weight: 2,900 kg EQUIPMENT Glue pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting edge trimming and chamfering unit RI 700 Compact edge scraper RBK501 Brushes SP700 Edge sanding unit LV 700 Heated infeed guide PLC control Panel support guide Large-diameter roll holder Edge cutting device for 3 mm thick rolled edges CE certification

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2010019101, clamping force: 1,750 kN, screw diameter: 32 mm, injection pressure: 1,611 bar, ejector force: 50,000 N, opening stroke: 450 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 1,750 kN Opening stroke: 450 mm Mould mounting area: 500 x 800 mm Minimum mould height: 500 mm Ejector force: 50 kN Ejector stroke: 150 mm Dry cycle time: 1.4 s / 357 mm Injection Unit Screw diameter: 32 mm Shot volume: 80.4 cm³ Shot weight (for PS): 77.2 g Injection force: 129 kN Injection pressure: 1,611 bar Injection rate: 201.1 cm³/s Plasticising capacity: 17 g/s L/D ratio: 20 Screw speed: 590 rpm Screw torque: 250 Nm Nozzle retraction force: 25/50 kN Nozzle stroke: 510 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 5,462 x 1,931 x 2,042 mm Net weight: 10,650 kg Heating Specifications Number of heating zones: 6 Heating capacity: 8.4 kW EQUIPMENT Control panel with keypad 32 mm screw Rotameter with electronic flow control 2 cores (moving platen) 1 core (fixed platen) 2-stage sequential air injection Heated channels: 32 pcs Kdsdpfexuqgbsx Ab Uow Euromap 67 interface 6 vacuum sensors

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 560, working width: 1,200 mm, working height: 800 mm, workpiece height (max.): 100 mm, empty load weight: 1,700 kg, throughput speed: 166 mm/s, TECHNICAL DETAILS Working height (carousel): 800 mm Working width: 1,200 mm Max. workpiece height: 100 mm Feed speed: 0.3 - 10.0 m/min Spindles length: 6 x 100 x 350 mm Extraction: 2,500 m³/h MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 4,000 x 2,210 mm Net weight: 1,700 kg Ksdpfsxuqr Dex Ab Uodw Electrical Data Voltage: 3 x 400/500 V - 50/60 Hz Max./Min. fuse: 32 A Max. power consumption: 15 kW EQUIPMENT lock-itTM spindles

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Kjdexuqc Nepfx Ab Uodw Operating hours: 70,029 h

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,250 h, functionality: fully functional, machine/vehicle number: 51760, clamping force: 11,000 kN, screw diameter: 90 mm, injection pressure: 1,910 bar, tool height: 1,270 mm, TECHNICAL DETAILS Clamping force: 11,000 kN Platen size (H x V): 2,340 x 2,040 mm Tie bar spacing (H x V): 1,575 x 1,320 mm Min. tool height: 592 mm Ksdpfxsxuqbre Ab Uodw Max. tool height: 1,270 mm Max. opening stroke: 3,016 mm Injection unit Screw diameter: 90 mm Shot volume: 2,480 cm³ Shot weight (PS): 2,256.8 g Injection pressure: 1,910 bar MACHINE DETAILS Net weight (including control cabinet): 62 + 11 t Operating hours: 70,250 h EQUIPMENT ENGEL ERC 84-1E robot

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mold height: 700 mm Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New IBED Kedpfx Abjxup T Hs Ujdw 2015: New wiring panel 2017: New motor and 2nd pump 2017: New injection side cylinder piston BS with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil