Used Driving Machine for sale (78,639)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1984, machine/vehicle number: 12.873, throat depth: 300 mm, punching force: 100 t, overall weight: 2,250 kg, cutting width (max.): 600 mm, TECHNICAL DETAILS Punching force: 100 t Stroke: 300 mm Punching speed: 28 strokes/min Shearing width: 250 mm Max. sheet thickness: 16 mm Round material cutting capacity: 50 mm Cutting width: 600 mm Max. sheet thickness: 20 mm MACHINE DETAILS Control: Conventional Drive: Hydraulic Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,250 x 2,100 mm Weight: 2,250 kg Shipping packages: 1 unit Bodpfx Aszxdquofxsll

Condition: good (used), Year of construction: 2000, Machine is with SK 30 Bjdpfx Afjznmqijxoll 20.000 rpm Parts shown by hand not come.

Condition: used, Year of construction: 2017, Overview This Gruber KombiKEG is a semi-automatic combined keg cleaning and filling machine for kegs and one-way kegs, rated at approximately 30 kegs per hour. Cleaning, sterilisation and filling run as one automatic cycle: interval cleaning of keg wall and down tube with caustic and acid, steam sterilisation, and counter-pressure filling with differential pressure control. The machine was installed in 2017 by BRAUKON and is fed by stainless steel roller conveyors on the infeed and outfeed side. The machine is built entirely in stainless steel and carries one cleaning head, one sterilisation station and one filling head. Filling runs with CO2 or nitrogen. Control is a Siemens SIMATIC PLC with a colour touch panel for settings, temperature and differential pressure control, error messages and counters. It is still installed, connected and in production, and can be visited in operation on request. Technical data - Manufacturer: Gruber (Alfred Gruber GmbH, Austria) - Model: KombiKEG - Year of manufacture: 2017 - Machine type: semi-automatic combined keg washer and filler, one cleaning head / one sterilisation station / one filling head - Capacity: approx. 30 kegs/hour - Kegs: stainless steel kegs with "A" type head and one-way kegs, all common fitting systems - Functions: interval cleaning (caustic and acid), steam sterilisation, automatic filling - Filling gas: CO2 or nitrogen - Control: Siemens SIMATIC PLC, colour touch panel HMI - Detergent tank: 175 l, insulated, integrated, with steam heating coil, control valve and steam trap - Pump: 1.1 kW with electronic dry-run protection - Construction: stainless steel 1.4301, stainless steel switch cabinet, no electrical components in the wet area - Pneumatics: Festo multipole valve block, pneumatic piston valves - Dimensions: approx. 140 x 126 x H 230 cm (machine without conveyors) - Installed footprint: approx. 449 x 98 cm including the infeed and outfeed roller conveyors - Power supply: 7.5 kW max. - Air supply: 2-3 bar, approx. 0.35 m³ per keg - Steam supply: 3-4 bar Bljdozxt Atjpfx Afxjl Equipment - Stainless steel roller conveyors, infeed and outfeed - Steam generator - Two vent valves for fast and complete filling - Pressure switch flow line monitoring and electronic return line probe - Keg valve open control, work tables with keg stop logs - Front panel to switch between filling and CIP cleaning - Technical documentation, conformity certificate and machine layout drawing - Spare parts Condition Used, in production and still installed under power. Approximately 3,000 operating hours, around 90,000 kegs filled and 75,000 kegs cleaned. Last production April 2026, last maintenance January 2026. The machine is clean, maintained and ready to produce. It is being replaced by a higher capacity machine. Availability Immediately available. Location: France. Dismantling, handling and truck loading are included by the seller (EXW loaded).

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. 2 pcs. Götzinger drilling and milling centers ----- For sale on behalf of a customer! 2 identical machines: One machine for "left" parts and one for "right" parts. The machines can also be used individually. The machines were controlled via window manufacturing software, but can also be Bsdsv N N Spspfx Afxsll operated via the machine software. Both machines are equipped identically: - Left and right drilling units for front-end drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once, and the unit carrier then moves for the various machining operations. Installation length per machine approx. 6 m. Individual sale possible: Price per machine 10,000 Euro See the enclosed PDFs for more information.

Condition: excellent (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 12,000 rpm, total height: 2,778 mm, total width: 2,977 mm, total length: 3,635 mm, overall weight: 6,700 kg, workpiece weight (max.): 800 kg, - Control system: SIEMENS 828 D Bedpfx Afszx U Nzexell including OPERATE and ShopMill - Number of magazine positions: 30 - Tool interface: BBT 40 - Internal cooling: 20 bar - Tool weight: max. 8 kg - Tool change time: 3 s - Chip-to-chip time: 5.5 s - Blum tactile probe ZX-Speed IR - Blum 3D measuring probe TC-52 LF

Condition: new, Year of construction: 2026, laser power: 6,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New fiber lasers from the HLB series - optimized equipment with an eye on the essentials - low acquisition costs Max Photonics resonator, Raytools auto focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: Raytools - Auto Focus Resonator 6KW Automatic changing table including light barriers Suction: Welldone CE certified Cypcut control with touchscreen including online programming directly on the control Sheet format 3,000mm x 1500mm Connection value max. 30kW Installation area approx. 9,000mm x 3,000mm x 2,200mm The machine is included 12 month guarantee Installation Delivery within Germany and Software/operator training offered Optional: Offline programming CAD CAM software Libellula [CUT] Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials for testing. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 20 years, of which we have been selling their fiber lasers for around 15 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us! Bodjzyaf Ropfx Afxell

Condition: as good as new (ex-display), Year of construction: 2022, New fiber lasers from OREE Laser Optimized equipment with an eye on the essentials - low acquisition costs despite high-quality components for high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: Raytools - Auto Focus Resonator 6KW MAX Photonics Changing table automatically CE certified Cypcut control with touchscreen Sheet format 3,000mm x 1500mm Connection value max. 30kW Installation area approx. 8,300mm x 2,400mm x 2,300mm The machine can be viewed with us under power Blodpfx Aephn Dgefxel In our exhibition we have various laser machines from our manufacturers under power and various materials to test. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 15 years. We have already installed more than 250 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us!

Condition: good (used), Code: 0288 Brand: SAC Model: F 12 Automatic working center for door and wooden window frames Technical data: Tenoning side : End cutting circular saw - Blade diameter mm 400 Motor power Hp 4 Horizontal positioning with indexing stops N° 2 tenoning spindles each lenght mm 320 Max tools diameter mm 320 Spindle diameter mm 50 Motors power each Hp 10 Max thickness of pieces mm 100 N° 2 suction inlets mm 130 Automatic table with guideline Profiling side: N° 4 profiling spindles each lenght mm 270 - Spindle diameter mm 50 Motors power each Hp 10 N° 4 suction inlets mm 130 Glass bead recovery device - Motor power Hp 3 - Blade diameter mm 200 Exhaust outlet diameter mm 60 Blsdpfoyg Iq Nsx Afxol Glass bead recovery device - Motor Hp 3 Exhaust outlet diameter mm 100 Adjustable feed speed Return roller conveyor Overall dimensions - tenoning machine : mm 2900 x 2400 x 2200 h Overall dimensions - profiling machine : mm 2900 x 1400 x 1800 h Total weight kg 2900

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Bjdjy Tt Rpopfx Afxell Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control system: MC 4 Year of manufacture: 2004 Operating hours: 76,000 h Technical data, clamping unit side Clamping force: 4200 kN Tie bar spacing h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold height: 380 mm Maximum mold thickness: 1400 mm Opening stroke: 1020 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection unit side Screw diameter: 70 mm Injection volume: 1047 ccm Injection pressure: 1778 bar Screw length: 20 l/d Screw speed: 527 rpm Bsdpfx Aozypcfefxsll Plasticizing rate: 95 g/s PS Free injection rate: 953 g/s PS Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 9.83m x 2.33m x 2.48m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 6x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 16x • Two-component injection molding machine

Condition: good (used), Code: 0410 Brand: CMC - ITALY Model: LT 1500 Lathe with copying device for wood and similar materials Technical specifications: Max centre distance 1500 mm Centre height 240 mm Max working diameter (without copying device) 450 mm Blodpfx Ajzc Rmljfxel Copying device with manual handwheel feed Gouge rest Tailstock Spindle speed rpm 600/1000/1500/2000 Motor power 1,5 Hp three-phase Overall dimensions mm 2430 x 730 x 1230 h Weight kg 340

Condition: excellent (used), Electronic machine, controlled by N.C. Numerical Control PC Windows-based software Blsdpfx Afszyku Nexjl Workbench width: 1300 mm Can process 4 panels in a single cycle The CNC controls the movement (X-axis) of the horizontal moving unit No. 1 horizontal head with 1 drilling spindle No. 1 dowel insertion nozzle (and glue injector) No. 4 vertical pneumatic pressure cylinders Total installed power (kW): 4

Condition: used, Year of construction: 1998, machine/vehicle number: 8.2259/355138, This Charmilles Technology wire erosion machine is being auctioned off online as part of our industrial auction / machine auction follow-up auction by J&S GmbH Automotive Technology - Machine Park. You can find this and many other items on our platform. Bodpfxozyf R Eo Afxsll

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Bledpfx Afezx S Egexol Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, machine/vehicle number: 008594, X axis working area: 3100 mm Y axis working area: 2200 mm Working Table: Flat table Main Electrospindle power: 8.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Bodpfxezvwqvo Afxsll Total number of tool changer positions: 20

Condition: used, machine/vehicle number: 008388, X axis working area: 3086 mm Blodpfsyngzvsx Afxjl Y axis working area: 2185 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 20

Condition: good (used), Year of construction: 2003, x-Weg 1270 mm y-Weg 660 mm z-Weg 610 mm Steuerung Ultimax 4 Tischbelastung 1300 kg Drehzahl 10.000 U/min Werkzeugwechseleinrichtung 24-fach Werkzeugaufnahme SK 40 Antrieb 15 kW Tischgröße 1500x660 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 9 t Raumbedarf ca. 4,8x4,5x2,95 m Blodpsiv R Hlefx Afxsl

Condition: good (used), Year of construction: 2004, Universalfräsmaschine mit Streckensteuerung HEIDENHAIN TNC 124 mech. Handräder drehbarer Kipptisch +- 45°, hydr. Werkzeugspannung, Halbkabine Kühlmittelbehälter Handbuch Technische Details: x-Weg 600 mm y-Weg 400 mm z-Weg 400 mm Spindeldrehanzahl 63 - 3.150 1/min Vorschub stufenlos 12-3000 / 6-1500 (Z) mm/min Pinolenhub 100 mm Kopf schwenkbar +/- 90° Spindelaufnahme ISO SK 40 Aufspannfläche 630 x 400 mm Gesamtleistungsbedarf 8 kW Maschinengewicht ca. 2,2 t Raumbedarf ca. 2 x 1,9 x 1,95 Bjdpfeigm Tcjx Afxell

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Haftkraftregelung, halbautom. Wuchtsystem Schleiflaenge 3150 mm Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Magnetspannplatte 3.000 x 600 mm Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Bljdpsdgk H Aofx Afxel Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m

Condition: good (used), functionality: fully functional, For sale is a used nailing machine from the manufacturer Bohm & Kruse, designed for the production and assembly of wooden crates. The machine is specifically designed for nailing crate parts and also features a riveting device. For safety reasons, the machine is enclosed and equipped with a two-hand control. Technical data / equipment: Manufacturer: Bohm & Kruse Machine type: Crate nailing machine / Nailing machine For nailing crate parts Riveting device available Multi-nailing head Workpiece support / workbench Adjustable workpiece stops Safety enclosure with protective grille included Two-hand control Emergency stop Robust industrial design The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available in the short term! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee. Blsdpozym Nisfx Afxsl

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Blsdpfx Asxy Tlwofxsl

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Bodpfexy Tmnox Afxoll

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Bsdexy Tm Iopfx Afxell

Condition: good (used), functionality: fully functional, For sale is a used, custom-built box-clamping machine for the production and assembly of wooden boxes. The system is equipped with a total of 6 hand-operated clamping devices from the Senco brand. The clamping devices are activated via foot valves, allowing the box parts to be positioned and clamped together during the work process. Bsdpfx Afszynf Soxoll Particularly suitable for the production of wine boxes, fruit boxes, vegetable boxes, and other wooden packaging. Technical data / equipment: Manufacturer: Custom-built Machine type: Box-clamping machine / Box assembly machine 6 hand-operated clamping devices Clamping device manufacturer: Senco Activation via foot valves Pneumatic operation For clamping box parts together Workpiece support / workbench Adjustable fixture for different box dimensions Robust frame construction Suitable for: Wine boxes Fruit boxes Vegetable boxes Packaging boxes other wooden boxes and wooden packaging The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, type of input current: three-phase, Automatic strapping machine in very good condition. Has been part of a larger system, but is not used. Only Strapex for sale. Blodeuaxgxjpfx Afxol