Used Durma Sbt 3006 for sale (217)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 107000 € 2022.3 € 3100 mm 13 mm 12 mm 8 mm 13 mm 10 mm 10 mm 8 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 5310 mm 1660 mm 1590 mm 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports Gjdpsypbqhsfx Abhekd IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, Year of construction: 2026, neu 2026 090203 prompt, Zwischenverkauf v Türkei 3810 € 1 Gedpeyz Dc Esfx Abhskd 1020 mm 1.5 mm 500 mm 1950 mm 1000 mm 1150 mm 420 kg welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 112500 € 2126.25 € 3100 mm 16 mm 16 mm 13 mm 16 mm 14 mm 12 mm 300 mm 300 mm 240 mm 50 mm 1140 mm 18.5 kW 5310 mm 1660 mm 1140 mm 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed Godpfx Absynm Hfshjkd hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Year of construction: 2024, operating hours: 33 h, condition: new, Machine dimensions: • (L x W x H): 4,250 mm x 1,700 mm x 2,750 mm Technical data: Bending length: 3,050 mm Free stand clearance: 2,600 mm Control system: CNC ModEva 19T Controlled axes, back gauge: X, R (Z, optional) Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand overhang: 410 mm Travel range X-axis: 650 mm Travel speed: X-axis: 500 mm/s Approach speed (Y): 160 mm/s Bending speed (Y): 10 mm/s Working speed (R): 350 mm/s Travel range R-axis: 250 mm Hydraulic oil volume: 200 l Motor power: 18.5 kW Weight: approx. 10,500 kg Standard equipment: Control system: Cybelec ModEva 19T CNC-controlled crowning Clamping system, top: Durma (European) Clamping system, bottom: 60 mm - holder Back gauge: AC servo motors with ball screw Options include: Fiesseler safety system AKAS II - FPSC-B-C Top tool, bent: P97.75.R08 (one with a split) Bottom tool, multi-die (die widths 16/22/35/50 mm) The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information. Gsdpfodx Nm Tox Abhjkd

Year of construction: 2024, condition: new, Manufacturer: DURMA Type: AD-R 40400 Year of manufacture: NEW Bending length: 4050 mm Distance between uprights: 3400 mm Stroke: 365 mm Installation height: 630 mm Overhang: 510 mm Table height: 1050 mm Table width: 154 mm Y-axis rapid traverse: 140 mm/sec Y-axis working speed: 8 mm/sec Y-axis retraction speed: 120 mm/sec X-axis working speed: 250 mm/sec R-axis travel: 250 Gkodpfxed Hy Huj Abhjd Motor power: 37 Length: 5750 mm Width: 2110 mm Height: 3540 mm Weight: approx. 25000 kg Standard equipment: Control system: CNC Cybelec ModEva 19T CNC-controlled motorized crowning European tool clamping system / or Durma clamping system on customer request Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes of the rear stop: X1, X2, R1, R2, Z1, Z2 Control system: DELEM DA-66T Delem 66T – 69T or Durma control system can be selected DAM – Durma angle measuring system Hydraulic upper tool clamping Wila NSCL-I-HC/UPB – PRO – 180 t/m Hydraulic lower tool clamping Wila NSCR-I-HC-CNC/UPB – PRO Power pack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 bending assistance 750 mm to 1500 mm selectable Parking area for support arms (1000 mm) TANDEM preparation Laser bending line Oil heating Central lubrication, manual or motorized Air conditioning for the control cabinet Further machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: new, Year of construction: 2024, Tube and Flat-Bed Laser 4 kW | Combination Unit HD-F 3015 BH Laser Combination Machine Machine Dimensions: • (L x W x H) 9,350 mm x 3,800 mm x 2,300 mm, length including filter 5,300 mm. Technical Details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 4 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Cutting Range: • Steel: 20 mm • Stainless steel: 10 mm • Aluminum (AlMg3): 12 mm • Brass: 10 mm • Copper: 6 mm Equipment: IPG 4000W fiber laser source (including cooler) Gkodpfefl T T Njx Abhed Compact dust extraction (filter) for 4 kW Air conditioning unit in the control cabinet Flat-bed laser with automatic exchange table Laser cutting monitoring Automatic laser head positioning CE - exchange table with light curtain safety system Control system SIEMENS SINUMERIK 840D Auto-focusing Precitec Procutter cutting head F150 focus Flat-bed laser with exchange table (automatic pallet change system) Tube cutting device, side mounting, max. Ø400 mm Sheet metal inspection (automatic sheet metal position and size measurement system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface, parameter page (power, speed, pressure) Software: Lantek or Metalix CAD/CAM software with automatic nesting Lighting for the work area Multi-chamber extraction system Warning light Special laser cutting options Positioning laser diode Piercing line (piercing settings) Focus line Plasma line Fast line Fly line Training support for CAD/CAM programming Application training Remote maintenance, by connecting to the machine, at no additional cost

Condition: new, neu 090253 November 2026, Zwischenve Türkei 21600 € 414.72 € 2550 mm 2.5 mm 35 1/min 750 mm 3 kW 2 Stk. 850 mm 400 mm 2860 mm 1350 mm 1200 mm Gkjdpfx Aez Hz Hyebhjd 1500 kg Motorized back gauge 750 mm Pneumatic sheet support Holddown with rubber Moveable foot switch Squaring arm 2 supporting arms Photocell-protection on the back side User manual in GERMAN or ENGLISH

Condition: new, Year of construction: 2024, Manufacturer: DURMA Model: HD-F 3015 III Fiber Year of manufacture: Available for order (delivery time 6-8 weeks) Working area X-Y-Z: 3060x1530x160 mm Laser power: 6000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness, mild steel: 25 mm Gkjdpofkpamjfx Abhod Sheet thickness, stainless steel: 15 mm Sheet thickness, aluminum: 20 mm Sheet size: 3048x1524 mm Load weight: 200 kg/m² Speeds, X-Y axes: 100 m/min. Speeds, X-Y axes, simultaneous: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet positioning and sheet size measuring system Automatic nozzle cleaning Positioning laser diode Central lubrication system Simple user interface, parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust collection system Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer recognition and measurement Pierceline Focusline

Condition: new, Year of construction: 2025, The DURMA AD-S 611600 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1600 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: Gedpfx Abovy Sraohokd - Model: DURMA AD-S 611600 - Pressing force: 1600 tons - Working length: 6 meters - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the backgauge control - Support for heavy and large sheets thanks to the integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Condition: new, Year of construction: 2024, Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will gladly provide you with further information. Gkjdsfin N Sspfx Abhsd Technical specifications available upon request. AD-R 80400 Bending force: 400 tons Bending length: 8050 mm With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would be happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on-site to respond quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Year of construction: 2024, condition: new, Here, we offer a customized tandem press brake. Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Gkedod Tpy Nopfx Abhsd Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal processing machines worldwide and has established itself as one of the world's largest manufacturers of sheet metal processing machines with its headquarters in Turkey. With over 60 years of experience in research and production of machines for sheet metal processing, annually producing 8,000 machines in three technologically advanced production facilities on a total area of 150,000 m², the Durmazlar Group and its DURMA Maschinen are now among the internationally renowned producers in its industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to machines for sheet metal processing. Our demonstration center gives you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct contact locally and to offer you services relating to training and customer support. We would now like to support you from Germany – from consulting and purchasing to the entire service life of your machine. With our German branch, we are always on site to react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: new, Here is a new AD-R 37220 being offered: Godpfx Absd S I R Tjhskd Bending force: 220 tons Bending length: 3700 Distance between stands: 3100 mm Stroke: 265 mm Installed height: 530 mm Overhang: 410 mm Table height: 900 mm Table width: 104 mm Y-axis rapid traverse: 160 mm/s Y-axis working speed: 10 mm/s Y-axis retraction speed: 120 mm/s X-axis working speed: 250 mm/s R-axis working speed (manual): 250 mm/s R-axis travel: 250 mm/s X-axis distance: 650 Length: 4950 mm Width: 1770 Height: 2900 Total weight: 14100 kg Options: CE with manual F.AKAS II M -FPSC-B-C + safety guard & switch R-axis X=650mm X,R (AL) European upper tool P97.75.R08 (one of them is a split die) European lower tool M.460R.85 (one of them is a split die) Quick clamping system CNC-controlled motorized crowning Y1, Y2, X, R (4-axis) X=650mm X,R Control unit - CNC DT-15 Graphical control unit S European clamping system S 60mm die holder (only for European dies) S Overhang 410 410 mm Rear gauge: motorized & linear guide & ball screw system Rear gauge finger, height-adjustable Rear gauge motor: AC type Adjustable support arms with linear guide over the entire length The machine can be inspected and demonstrated at any time in our demonstration center in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Year of construction: 2024, condition: new, The DA-69T control system offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The complete 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. DA-69T features: • 3D and 2D graphical touchscreen programming Godpsd Sak Sjfx Abhjkd • 3D representation in simulation and production • 17-inch TFT color display with high resolution • Complete Windows application suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB, peripheral interface • Open system architecture • Sensor-based bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection; climate change and the greenhouse effect will benefit, as will future generations! • Fully electronic drive • Up to 30% higher productivity • Up to 50% energy savings through start-stop technology • Faster than hydraulic press brake • Lower operating costs • Significantly lower service and spare parts costs (the electric press brake is technically much simpler and requires almost no maintenance) • No harmful oil • Quiet – efficient – independent of hydraulic oil – low-noise operation • Relaxed and stress-free bending • Complete working area • Touchscreen operation Machine dimensions: (L x W x H): 2,150 mm x 1,650 mm x 2,800 mm Technical details: Bending length: 1,250 mm Free stand clearance: 1,300 mm Press force: 400 kN (40 tons) Control: CNC ModEva 19T Controlled axes, back gauge: X, R (Z, optional) Stroke: 200 mm Installation height: 440 mm Table width: 104 mm Table height: 1,000 mm Stand overhang: 410 mm Travel range X-axis: 650 mm Travel speed X-axis: 500 mm/s Approach speed (Y): 180 mm/s Bending speed (Y): 20 mm/s Working speed (R): 350 mm/s Travel range R-axis: 250 mm Motor power: 7.5 kW Weight: approx. 4,500 kg Standard equipment: Control system: Cybelec ModEva 19T CNC-controlled crowning Top clamping system: Durma (European) Bottom clamping system: 60mm - holder Back gauge: AC servo motors with ball screw Options include: Fiesseler safety system AKAS II M FPSC-B-C Control: Delem DA 69T CNC-controlled back gauge X, R, Z1, Z2 Hydraulic top tool clamping Durma (Type Wila) Hydraulic bottom tool clamping Durma (Type Wila) Hydraulic power pack for clamping D-Bend simulation software The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2024, condition: new, Manufacturer: DURMA Model: AD-R 30220 Bending length: 3050 mm Press force: 2200 kN Control system: CNC DT-10 Operating hours: 0 h Controlled axes, back gauge: X, R Distance between uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Upright overhang: 410 mm Travel range, X-axis: 650 mm Travel speed, X-axis: 250 mm/s Approach speed: 140 mm/s Bending speed: 10 mm/s Retraction speed: 140 mm/s Dimensions L/W/H: approx. 4250x1770x2900 mm Weight: approx. 12250 kg Gkjdod Srk Ejpfx Abhjd Standard equipment Y1, Y2, X = 650 mm Control system: CNC DT-15 European tool clamping system 60 mm die holders (for European die system only) 2 front-adjustable support arms with linear guide along the entire length Motorized back gauge with linear guide and ball screw Height-adjustable back gauge finger Servo motor for back gauge Side safety guards CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C safety cover and switch Controlled axes X, R-axis, Z-axes adjustable manually Quick clamping CNC-controlled motorized crowning The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Further machines are available for demonstration in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: new, Year of construction: 2024, HD-F Fiber Laser Cutting Systems Durma fiber laser cutting machines are characterized by faster cutting speeds and energy efficiency, especially compared to CO2 lasers. Thanks to the high-tech fiber laser cutting technology, the laser machines are easy to operate and maintain. With the highly efficient components used in Durma fiber laser cutting systems, you receive quality, performance, and efficiency simultaneously, which increases the value of your company. Thanks to highly precise Helis gears, very high acceleration values (28 m/s2), a high travel speed (170 m/min), and positioning tolerance values (0.05 mm) can be achieved. Durma fiber laser cutting systems are unique with their stable and modular machine body, excellent filter system, compact design, and efficient and user-friendly structure. X-axis: 6000 mm Y-axis: 3000 mm Z-axis: 125 mm Max. sheet size: 6048x2024 mm Max. sheet weight: 200 kg/m2 X-axis: 100 m/min. Y-axis: 120 m/min. Synchronization: 156 m/min. Acceleration: 16 m/s2 Positioning accuracy: + 0.05 mm Reproducibility: +0.05 mm Cutting thickness Mild steel: 25 mm Stainless steel: 15 mm Aluminum: 20 mm Standard equipment Automatic pallet changer Sinumerik 840D control Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measurement system Gkjdpsg Adu Hofx Abhed Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust extraction Vanterm Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet layer detection, measurement The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 137900 € 2606.31 € 220 to 6050 mm Y1 / Y2 / X Achse 265 mm 5100 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 1050 mm 154 mm 250 l 22 kW 7500 mm 1770 mm Gksdpfswiq R Ssx Abhed 3350 mm 20800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF:- more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... PRICE FCA TÜRKIYE optional equipment: R-axix Z1/Z2/R-axes DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Year of construction: 2024, condition: new, SPECIAL OFFER: Press brake AD-S 1260 Length/Width/Height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons Bending length: 1250 mm Distance between stands: 1050 mm Stroke: 160 mm Gkodpjd R Dhpofx Abhjd Installation height: 530 mm Overhang: 450 mm Table height: 900 mm Table width: 104 mm Y rapid traverse: 200 mm/sec. Y working speed: 10 mm/sec. Control: CYBELEC MODEVA 19T touchscreen CE compliant with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) European upper tool: P97.75.R08 (one of them is split) European lower tool: M.460R.85 (one of them is split) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC-controlled motorized crowning 60mm die holder (only for European dies) Overhang 410 Adjustable support arms at the front with T-slot, strip stop and guide along the entire length Rear stop: Siemens DC servo motor & linear guide & ball screw system Support arms: 2 pcs Stop fingers: 2 pcs With foot pedal Oil capacity: 100 l Price is valid ex Staufenberg. The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 601000 - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control Gjdpfjvwm A Ijx Abhjkd - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Year of construction: 2024, condition: new, Length/Width/Height: 3200mm/1550mm/2750mm Weight: 3550 kg Bending force: 60 tons Bending length: 2050 mm Distance between the uprights: 1700 mm Stroke: 265 mm Installation height: 530 mm Overhang: 410 mm Table height: 900 mm Table width: 104 mm Y rapid traverse: 200 mm/sec. Y working speed: 10 mm/sec. Control: CYBELEC MODEVA 19T touchscreen CE compliant with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) European upper tool: P97.75.R08 (one of which is split) European lower tool: M.460R.85 (one of which is split) Manual quick clamping Y1, Y2, X, R (4-axis) X=650mm X,R CNC-controlled motorized crowning 60mm die holder (only for European dies) Overhang 410 Adjustable front support arms with T-slot, stop, and guide along the entire length Rear stop: Siemens DC servo motor & linear guide & ball roller system Support arms: 2 pieces Stop fingers: 2 pieces With foot pedal Oil capacity: 100 l Price is valid ex works Staufenberg. The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by appointment. Gksdpfsfgz U Sjx Abhjd Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2024, TP Turret Punch Presses With the Durma TP series of punch presses, you can achieve top quality with a precise and fast turret, improved hydraulics, and 3 automatic indexing stations. Featuring a movable table, partial unloading container, automatic clamps, CAD/CAM software, and a control unit, Durma turret punch presses are easy to operate. Automation systems that increase both work safety and productivity also enhance user safety while reducing downtime. Punching force: 30 tons Working area: 3,000+R x 1,500 mm X-axis travel: 3,000+R mm (adjustable) Y-axis travel: 1,500 mm Gksdpfeg Admfox Abhjd Y-axis speed: 60 m/min X-axis speed: 70 m/min Combined X+Y speed: 92 m/min Max. stroke rate (in 1 mm increments, 1 mm sheet thickness): 1,100 strokes/min Max. stroke rate (in 25 mm increments, 1 mm sheet thickness): 325 strokes/min Max. marking speed: 1,200 strokes/min Main cylinder stroke: 40 mm Max. punching stroke: 25 mm Max. cutting capacity with fixed tool station (steel): 6 mm Max. cutting capacity with fixed tool station (NiRo): 3 mm Max. cutting capacity with indexing station (steel): 3 mm Max. cutting capacity with indexing station (NiRo): 1.5 mm Tool changer (27 stations without tools and holders): 11 x A-station fixed: 0.8-12.7 mm 11 x B-station fixed: 12.8 - 31.7 mm 2 x C-station fixed: 31.8 - 50.8 mm 1 x D-station fixed: 50.9 - 88.9 mm 3 x D-station indexing: 50.9 - 88.9 mm Positioning accuracy: +/- 0.1 mm Repeatability: +/- 0.05 mm Tool changer rotation speed: 22 rpm Auto-index rotation speed: 150 rpm Max. sheet weight: 200 kg Table height: 940 mm Air pressure: 6 bar Max. punching diameter (D-station): 88.9 mm Motor power: 7.5 kW Main dimensions: Height: 2,310 mm Width without light curtains: 6,300 mm Width with light curtains: 8,300 mm Length without light curtains: 6,650 mm Length with light curtains: 7,650 mm Weight: 19,500 kg

Year of construction: 2024, condition: new, Manufacturer: DURMA Type: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Number of strokes per minute: 42 Motor power: 7.5 kW Rear gauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment Control unit EZM9910 Rear gauge range 750 mm, programmable via the control unit Plastic inserts for the hold-down device 1 side gauge and 2 sheet support arms Gksdpjd R Er Dofx Abhod Finger guard Portable foot switch with emergency stop Spring-loaded flap gauge in the T-slot of the support arms Ball screw Table plates with ball bearings Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle gauge 0-180° The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2024, Manufacturer: DURMA Type: AD-S 30175 Year of manufacture: 2020 Bending length: 3050 mm Press force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes, back gauge: X, R Distance between uprights: 2600 mm Stroke length: 265 mm Installed height: 530 mm Table width: 104 mm Table height: 900 mm Upright overhang: 410 mm Travel range X-axis: 650 mm Travel speed X-axis: 250 mm/s Approach speed: 160 mm/s Bending speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1, Y2, X=650 mm Control: CNC DT-15 European tool clamping system 60 mm die holder (for European die system only) 2 front-adjustable support arms with linear guide along the entire length Back gauge, servo motor Safety guards, side CE marking Gkedpfxjd Srk Ss Abhsd Additional equipment CE safety system with manual FIESSLER AKAS II M-FPSC Controlled axes X, R-axis, Z-axes adjustable manually CNC-controlled motorized crowning European upper and lower tools from Rolleri The machine can be inspected and demonstrated at any time in our showroom in Staufenberg, by prior appointment. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2024, condition: new, Axes: Y1, Y2, X, R Control: Delem 66 T or 69 T (selectable) CE standard with manual Fiessler AKAS II M -FPSC-B-C + safety cover & switch Gsdpfx Aefin Hcebhekd Durma upper tool Durma lower tool CNC-controlled motorized crowning Overhang: standard 510 mm or selectable 750 mm, 1000 mm Back gauge: motorized & linear guide & ball bearing system Back gauge fingers: height-adjustable Back gauge motor: AC type Adjustable support arms with linear guide along the entire length Technical data available upon request.

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: • (L x W x H) 9,350 mm x 2,800 mm x 2,300 mm, length including filter: 5,300 mm. Technical details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 6 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Standard equipment: • Control system: Siemens Sinumerik 840 D • Laser head: Precitec light Cutter F 125 Focus • Sheet support detection and measuring system • Positioning laser diode • Automatic sheet changer • Automatic nozzle cleaner Gsdpfed N Rfdox Abhskd • Central lubrication unit • Chip collection tray • Software: Lantek or Metalix CAD/CAM software with auto-nesting • Remote control: remote maintenance Laser cutting options: • Pierceline (piercing settings) • Focusline • Plasmaline • Fastline • Flyline Options include: • Tower with 10 pallet spaces • Automatic chip conveyor • Integrated camera (part tracking, micro-joints) • Air dryer • Automatic nozzle changer • Camera inside

Condition: new, Year of construction: 2024, operating hours: 32 h, Manufacturer: DURMA Model: AD-S 30135 Year of manufacture: 2018 Bending length: 3050 mm Press force: 1350 kN Control system: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1, Y2, X Distance between uprights: 2600 mm Stroke length: 265 mm Installed height: 530 mm Table width: 104 mm Table height: 900 mm Upright overhang: 410 mm Travel range of the X-axis: 650 mm (double guide, aluminum) Travel speed of the X-axis: 250 mm/s Approach speed: 160 mm/s Bending speed: 10 mm/s Retraction speed: 120 mm/s Gkjdpfxodx Rd Ns Abhsd Dimensions L/W/H: approx. 4200x1680x2750 mm Weight: approx. 10250 kg Standard equipment Y1, Y2, X = 650 mm Control system: CNC DT-15 Manual crowning European tool clamping system 60 mm die holders (only for European die system) 2 front-movable support arms with linear guide over the entire length Back gauge: motorized with linear guide & ball screw Back gauge finger height-adjustable, R-axis manual Back gauge motor: servo Safety guards on the sides CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C + safety guard & switch The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Other machines are available for demonstration in Staufenberg. Upon request, we will be happy to provide you with further information.