Used Eco Pharm for sale (6,029)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Dcedpfx Aed Tiu Esk Aep Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 560 mm, insertion height: 80 mm, table height: 900 mm, cutting length (max.): 560 mm, overall weight: 575 kg, type of input current: three-phase, total width: 1,670 mm, total height: 1,500 mm, working width: 2,400 mm, total length: 1,150 mm, input voltage: 400 V, table width: 2,400 mm, input frequency: 50 Hz, lifting height: 80 mm, Equipment: documentation/manual, safety light barrier, The (POLAR) Mohr D 56 ECO is a robust, hydraulically powered paper cutting machine. The machine is supplied with an original POLAR spare blade, hydraulic oil, a blade changing kit, grease gun, and various other tools. Tables on the left and right sides are optional. If desired, these can be disassembled, for example, when space is limited. - Model: (POLAR) Mohr D56 ECO - Type: hydraulic paper cutting machine - Cutting width: 560 mm - Table depth: 560 mm - Maximum feed height: 80 mm - Clamping force: 200–1,200 daN Dcsdpfx Akoz Aq D Ns Ajp - Rear gauge speed: 70 mm/sec - Smallest automatic cut without spacer: 15 mm - Smallest automatic cut with spacer: 50 mm - Control: 5.5" monochrome display with membrane keypad - Memory: maximum 198 programs - Hydraulic, precise, and material-friendly swing cut - Adjustable clamping pressure and pre-clamping time - LED marking of the cutting line - Smooth stainless steel table surface for easy material transport - Simple blade change and fine adjustment at the front Dimensions (W × D × H): 1,150 × 1,670 × 1,500 mm This machine has been inspected and thoroughly tested by our own specialized technical department. If you require any further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: like new (used), Year of construction: 2012, machine/vehicle number: IntNr231682, For sale is a Büchele / SF-Systeme SFB-301 eco high-pressure system with a 150 bar operating pressure, replaceable filter system, additional 10 µm fine filter, 8 valves, and a 200-liter tank capacity, manufactured in 2012. Technical data Manufacturer: SF-Systeme Büchele Model: SFB-301 eco Year of manufacture: 2012 Max. operating pressure: 150 bar Flow rate at 150 bar: approx. 24 l/min Tank capacity: approx. 200 liters Main filter system: replaceable filter Filter fineness of main filter: approx. 40 µm Additional filter / fine filter: 10 µm Valve configuration: 8 valves Number of coolant outlets: up to 8 separately controllable circuits, depending on machine integration Overall dimensions L × W × H: approx. 1,475 × 700 × 730 mm Medium: cooling lubricant / KSS Technical documentation available. The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale! Dcode Ahfayopfx Ak Ajp

Year of construction: 2019, condition: used, This listing is for a 2019 Thermo Scientific Heraguard ECO 0.9 Laminar Flow Clean Bench The unit is in full working condition and ready for immediate use This laminar flow clean bench is a high-quality lab instrument manufactured by Thermo Scientific (Model: Heraguard ECO 0.9). This unit provides a clean, ISO Class 5 work environment using horizontal laminar flow technology, making it ideal for sensitive applications requiring product protection. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Dsdpfx Ao Agpwrek Aecp specifications_en: Voltage: 230V, Frequency: 50-60Hz, Power: 1570W, Working Volume: 920x645x585 mm, IP Rating: IP 20

Year of construction: 2026, condition: new, Picture 1: 10tonnes Hydraulic toe jack with multiple adjustable lifting claw and integrated hydraulic pump and external hose coupler. Low weight. other pictures: Several Hydraulic toe jack HTS ECO-Jack S-Series - Made in Germany -NEW- with different lifting capacities from 3-25 tonnes, integrated 520 bar hydraulic unit, swiveling pump lever, swiveling support legs and adjustable lifting claw, external hose coupler starting at 10 tonnes, twin pump starting at 15tonnes capacity. Please request for capacity and other variants up to 50 tonnes. Fast delivery - normally in stock. Dcjdpfx Akogi Dkce Aep

Condition: used, The CNC machine is in excellent condition, and all the vacuum cups are new. Dcedpo Aib Uwofx Ak Aep

Condition: like new (used), SHOWROOM MACHINE For sale is an as-new ECO Edge Sander KSC-26B 150 mm, equipped with a powerful 4 HP motor for demanding applications. The showroom machine is in its original condition, giving you the full warranty. Technical data: - 4 HP motor (400 V) - Belt length: 2,600 mm - Belt width: 150 mm - Oscillation motor: 0.3 HP - Table size: 750 x 300 mm - Weight: approx. 170 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €100.00 incl. VAT Germany: €120.00 incl. VAT Dsdpjyb Sgwjfx Ak Ajcp South Tyrol: €150.00 incl. VAT Related terms: ECO KSC-26B, edge sander, 150 mm belt, 4 HP motor, 400 V drive, oscillation, workshop equipment, woodworking, professional quality, sanding technology Reference: R-A0117

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 99500007558, total width: 800 mm, total length: 1,100 mm, total height: 800 mm, input voltage: 230 V, overall weight: 150 kg, table length: 1,100 mm, table width: 800 mm, table height: 800 mm, input frequency: 50 Hz, compressed air connection: 8 bar, The machine is in very good condition and comes from an educational institution. Dcsdpfx Aez E A A Tsk Aep

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Dcjdpou Eki Sefx Ak Asp Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: E11809025, For sale: OTEC fine polishing machine - Model: ECO 1 X 18 - Serial number: E 118/09025 - Year of manufacture: 2009 - Weight: 50 kg Djdpfez Iyn Eex Ak Ajcp The machine has been regularly serviced and maintained and is in excellent condition. It has seen very little use and is practically new. It is suitable for the fine polishing, cleaning, and deburring of highly demanding parts that have undergone various machining processes. Workpieces are placed in the processing bowl along with media (granulate) and coolant; the bowl both rotates and vibrates, resulting in a polishing effect. The machine operates fully automatically, allowing for the adjustment of polishing time, vibration frequency, and rotation speed. It is connected to the power supply and ready for immediate operation.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 7,315 h, functionality: fully functional, machine/vehicle number: 4445, travel distance X-axis: 2,320 mm, travel distance Y-axis: 1,980 mm, travel distance Z-axis: 860 mm, controller model: Siemens Sinumerik 840D sl, spindle speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €425,000 plus VAT! Note: This sale concerns the sister machine of the identical Hamuel Reichenbacher machine that was recently auctioned. TECHNICAL DETAILS Travel distance X1/X2 axis: 2,320 mm Travel distance X3/X4 axis: 2,320 mm Travel distance Y1/Y2 axis: 1,980 mm Travel distance Z1/Z2 axis: 860 mm Rotational range B1 axis: ±181° Rotational range B2 axis: ±181° Rotational range C1 axis: ±361° Rotational range C2 axis: ±361° Spindle speed: 40,000 rpm Tool holder: HSK-E40 Spindle power: 7 kW Number of spindles: 2 Travel speed in X direction: 90 m/min Travel speed in Y direction: 45 m/min Travel speed in Z direction: 90 m/min Number of tools: max. 6 Tool diameter with 4 tools: max. 40 mm Tool diameter with 2 tools: max. 240 mm Tool length from reference plane: max. 270 mm Tool weight: max. 2 kg Total weight of all tools: max. 24 kg MACHINE DETAILS Djdpfxjztxczs Ak Ajcp Control system: Siemens Sinumerik 840D sl Compressed air supply Compressed air quality: according to DIN ISO 8573-1 Pressure: min. 7 bar Air volume flow: approx. 1,000 Nm³/min Voltage: 400 V (±5 %) Frequency: 50 Hz Mains connection: 3 phases, neutral conductor and protective conductor Short-circuit strength Ic: 17 kA Dimensions & Weight Dimensions (X x Y x Z): approx. 5,800 x 3,600 x 3,000 mm Machine weight: approx. 15.0 t Operating Hours Spindle hours, spindle 1: 7,872 h Spindle hours, spindle 2: 7,315 h EQUIPMENT Chip conveyor Hexagon 3D measuring probe Note: Further technical details can be found in the attached offer. Clamping devices and tools are not included in the offer.

Condition: used, Year of construction: 2012, feed length X-axis: 635 mm, feed length Y-axis: 510 mm, feed length Z-axis: 460 mm, controller model: Sinumerik, table width: 560 mm, table length: 790 mm, spindle speed (max.): 10,000 rpm, spindle mount: MK 4, We offer this used DMG DMC 635 V eco vertical machining center, manufactured in 2012. Serial number: 1537000588A X/Y/Z: 635 × 510 × 460 mm Djdez Iy A Ajpfx Ak Ascp Table: 790 × 560 mm Spindle speed: up to 10,000 rpm SK40 Sinumerik Spindle refurbished in October 2019. First owner If you have any questions or require further information, please send a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 15.2015.70.04.352, total length: 3,930 mm, table length: 2,000 mm, total width: 2,290 mm, table height: 1,300 mm, Wissner WITEC 2015 Eco milling machine for sale For sale: Wissner WITEC 2015 Eco CNC milling machine. A robust and precise milling machine from the German brand Wissner. This machine is suitable for a wide range of milling and machining operations and has been used in our production processes. The machine is being offered for sale due to the cessation of our business activities, making it available for purchase. Features: Brand: Wissner Type: WITEC 2015 Eco Serial number: 15.2025.70.04.352 CNC milling machine Robust industrial design Suitable for precise milling operations Dcjdpfx Ajz A Azqok Ajp Year of manufacture: 2004 Includes: extraction system / vacuum pump / cooling system / tools / software / etc. The machine is currently still installed and can be viewed in working condition by appointment. An interesting machine for companies looking to expand their production capacity or seeking a professional CNC milling machine or spare parts. If you have serious interest or questions about the machine, please feel free to contact us. Additional photos, videos, and technical information are available upon request.

Condition: used, mileage: 285,089 km, power: 309 kW (420.12 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 9,440 kg, maximum load weight: 8,560 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, wheelbase: 5,700 mm, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,480 mm, Year of construction: 2012, construction height: 4,000 mm, number of beds: 1, Equipment: air conditioning, cruise control, onboard computer, tail-lift, trailer coupling, The Iveco Stralis AS 190 S 420 ECO, built in 2012, is a reliable commercial vehicle distinguished by its Euro 5 diesel technology. With an impressive engine output of 309 kW (420 hp) and a displacement of 10,308 cc, it delivers high performance and efficiency. The vehicle has a mileage of 285,089 km and is equipped with an automatic transmission, which enhances driving comfort. The truck is finished in an attractive yellow metallic paint and meets the requirements for the green emissions sticker. With a valid technical inspection (HU) until February 2026, the Stralis is ready for use without the need for an imminent inspection. Its dimensions of 4,000 mm height, 2,550 mm width, and 9,480 mm length make it highly versatile, further supported by a wheelbase of 5,700 mm. Key features include air suspension, automatic climate control, a tow hitch (AHK), and a retarder, providing efficient braking support. The truck is also equipped with a tail lift (LBW) for easier loading operations. Dcjdjwwmx Iopfx Ak Aop Sale exclusively to commercial operators (agricultural businesses, freelancers, small and large enterprises) or for export. Subject to prior sale and errors excepted.

Condition: used, Year of construction: 2011, feed length X-axis: 635 mm, feed length Y-axis: 510 mm, feed length Z-axis: 460 mm, controller model: Sinumerik, table width: 560 mm, table length: 790 mm, rotational speed (max.): 10,000 rpm, overall weight: 3,900 kg, spindle speed (max.): 10,000 rpm, We offer this used DMG ECOLINE DMC 635 V eco vertical machining center, manufactured in 2011. Dedpfx Aoz Iyzrsk Ajcp Serial number: 1537000413A Year of manufacture: 2011 Maximum spindle speed: 10,000 rpm X/Y/Z: 635 x 510 x 460 mm Table: 790 x 560 mm SK40, Sinumerik Spindle refurbished in October 2024 First owner Weight: 3900 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Dodszlbqrepfx Ak Ajcp Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS per specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for ...

Year of construction: 2022, condition: ready for operation (used), Electrical injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 600/130B eco features a clamping force of 600 kN and a maximum injection pressure of 1,840 Bar. It has a screw diameter of 28 mm and accommodates molds with a maximum height of 330 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 600/130B eco machine we have for sale. Contact us for further details. Dsdpoz Ahulefx Ak Aocp • Clamping force: 600 kN • Space between columns: 310 x 310 mm • Maximum mold height: 330 mm • Minimum mold height: 120 mm • Screw diameter: 28 mm • Maximum injection volume: 68 cm3 • Maximum injection pressure: 1,840 Bar • Centering ring: 125 mm • Hot runners in the machine: 6 • Core puller: 2 • Pneumatic valve: 2

Condition: used, mileage: 366,769 km, power: 309 kW (420.12 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 9,630 kg, maximum load weight: 16,370 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,500 mm, Year of construction: 2011, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, Shifts up to 2nd gear. Djdpfeupac Iox Ak Ajcp The used Iveco STRALIS AS 260 S42 is a reliable truck of emission class Euro 5, making it ideal for commercial operators in sectors such as agriculture and export. Equipped with a powerful 309 kW (420 HP) engine and a displacement of 10,308 cc, it offers impressive performance. The truck features an automatic transmission and has a mileage of 366,769 km. First registered in October 2011, the vehicle is in good condition and is supported by a green environmental badge. The yellow metallic paintwork gives the vehicle a striking appearance. Useful features such as a steering axle, lift axle, and an INTARDER system provide enhanced handling and safety. In addition, the installed air conditioning ensures driving comfort. This Iveco truck has a total height of 4,000 mm, a width of 2,500 mm, and a length of 9,500 mm, with a permissible gross weight of 26,000 kg. For transport purposes, the vehicle offers cargo options and a trailer hitch mechanism (AHK). Interested buyers can inspect the vehicle without prior appointment from Monday to Friday or on Saturdays. Sale only to commercial operators (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, Year of construction: 2008, functionality: fully functional, input voltage: 400 V, volume flow: 3,600 m³/h, power: 5.5 kW (7.48 HP), Equipment: type plate available, Industrial filtration and dust collection system designed by Sideros Engineering for treating fumes and dust generated during thermal cutting, welding, or grinding processes. Dcodpfez Hk N Dex Ak Ajp Collection and filtration of fumes from oxy-fuel cutting, plasma cutting, and laser cutting, as well as dust from welding and sanding.

Condition: ready for operation (used), Year of construction: 2022, clamping force: 900 kN, screw diameter: 36 mm, Hydraulic injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 900/280 A ECO features a clamping force of 900 kN and a maximum injection pressure of 2,340 Bar. It includes a screw diameter of 36 mm and a maximum injection volume of 121 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 900/280 A ECO machine we have for sale. Contact us for further details. • Space between columns (tie-bar spacing): 360 x 360 mm • Maximum mold height: 390 mm • Minimum mold height: 150 mm • Maximum injection volume: 121 cm3 • Maximum injection pressure: 2,340 bar • Centering ring: 125 mm • Hot runners in the machine: 6 • Core puller: 2 Dcedpfez Dk Tqex Ak Aop • Pneumatic valve: 2

Condition: used, Year of construction: 2021, CNC portal flame cutting machine Manufacturer: Messer Type: MultiTherm Eco 3600 Year of manufacture: 2021 CNC control: Global Control Track gauge: 3,600 mm Working tables: 2,300 x 6,200 mm Dcsdpfxozyablj Ak Aop 4 oxy-fuel torches, type ALFA MS 4452/250 Cutting thickness: max. 150 mm Bevel cutting possible Automatic gas control (OmniFlow) for cutting oxygen (max. 15 bar) Extraction system: Keller dry dust collector, type Vario 2 Software: OmniWin2021 31126

Condition: excellent (used), Year of construction: 1991, operating hours: 22,000 h, volume flow: 4.05 m³/h, ECOAIR D 40 screw compressor 30 kw motor Dodporgq Axefx Ak Aecp Capacity 4,05 m3/min Pressure 10 bar Mileage 22000 Mtg Compressor fully operational.

Condition: used, Year of construction: 1991, Technical details: feed pressure: 10 bar volume capacity: 4,05 m³/min liter capacity: 4050 l/min Number of working hours: 16160 h total power requirement: 30 kw weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar Djdpfxou Nz Dne Ak Aocp *

Condition: used, Year of construction: 1998, machine/vehicle number: 980919, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 3,450 m³/h, intake vacuum (max.): 3,550 mbar, suction capacity: 3,450 m³/h, intake manifold diameter: 250 mm, filter area: 23 m², total height: 2,959 mm, total length: 2,500 mm, total width: 1,238 mm, overall weight: 750 kg, Used clean air system for two to three woodworking machines operating simultaneously. Can be installed outdoors. Dedpozukuljfx Ak Aecp New units can be installed upon request. The control system is equipped with a speed control function via a frequency converter.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Vertical machining center Manufacturer: DMG Gildemeister Type: DMC 635 v eco Machine No.: 1537000170A Year of manufacture: 2009 Control system: Siemens 810D Shopmill Axes: 3 Travel ranges X: 635 mm Y: 510 mm Z: 460 mm Tool changer: 20 positions, SK 40 Spindle speed: 20-8,000 rpm Drive power: 13/9 kW (40/100% ED) - Direct path measuring system for X, Y, and Z axes - Compressed air for measuring systems - Coolant/air switchover - Table size 560x790 mm - Electronic handwheel Dcodpfez I Rnvjx Ak Aop Errors and prior sale excepted.