Used Econo Cut for sale (14,754)

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Knodpfsztmyhox Ak Aoa Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Knodpfx Asztmwysk Aoa Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Knjdpfx Aksztmvvo Asa Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Knodoztmvpspfx Ak Asa Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Kjdpfxjztmvis Ak Ajna Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Ksdpfx Aksztmvco Aena Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Knedpfx Aeztmu Esk Aja Drive motor 250 kw

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Kedezryuvspfx Ak Aona - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: good (used), Year of construction: 1992, Paper cutting machine, Polar 115 EM. Manufactured in 1992. Programmable control, monitor, air table, and light barriers. Ksdpfxjztqnve Ak Aena

Condition: ready for operation (used), Year of construction: 1959, functionality: fully functional, machine/vehicle number: 80, total height: 1,900 mm, overall weight: 2,500 kg, total width: 2,200 mm, total length: 1,500 mm, power: 5 kW (6.80 HP), TECHNICAL DETAILS Power: 5 kW MACHINE DETAILS Drive system: Conventional Dimensions & Weight Ksdszrmvtjpfx Ak Ajna Dimensions (L x W x H): 1,500 x 2,200 x 1,900 mm Unladen weight: 2,500 kg Number of transport packages: 3 EQUIPMENT Documentation New Dathan knife sets Tools Measuring accessories

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm - Blade guard included - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES – Made in Germany – 2 roller tables – Pneumatic saw blade stroke – Used saw in perfect condition Knedpsztzc Defx Ak Asa Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture: 2012 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Ksdpfsztp Emox Ak Aena Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-VO generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm including option KIT 70 Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER hand box for comfortable setup VISION 5 control 15" LCD color screen, jog control panel and mouse Includes AGIESETUP 3D Includes Fast-Threading option Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. A customized test cut is also possible. We also offer commissioning and on-site training for this machine.

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Knedpozur Hpjfx Ak Aoa Technical data: – Maximum sheet size before processing: 400 x 550 mm – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Very good Polar 66 paper cutting machine with a 67 cm cutting width. Stack height: 8 cm. Knjdpfx Aszulvkek Aja Fully hydraulic paper cutting machine. Hydraulic pressure continuously adjustable from 200 daN to 1500 daN. Programming function. Safety light curtain. Weight: 620 kg. Dimensions: 125 x 182.5 x 151.5 cm. Electrical connection: 400 V / 50 Hz. Includes 2 blades, tools, and documentation.

Year of construction: 1999, condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades -Manufacturer: Getecha, Side-mounted mill cutting mill -Type: GRS182-A1.50 -Inlet cross-section: 310 x 290 mm -Sieve perforation: Ø 6 mm -Dimensions: 720/700/H1220 mm -Weight: 210 kg Knedozrfbnjpfx Ak Asa

Condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Manufacturer: H. Dreher, Side-mounted mill cutting mill -Type: S26/26 -Drive motor: 5.5 kW Knsdpfezf Ng Usx Ak Aoa -Number of cutting blades: 4 pieces -Number of counter blades: 2 pieces -Sieve perforation: Ø 8 mm -Rotor width: 250 mm -Rotor diameter: 260 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 650/1460/H1880 mm -Weight: 475 kg

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Knsdpfx Akezizkyo Aoa Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting width (max.): 2,270 mm, insertion depth: 9,510 mm, insertion height: 120 mm, cutting length (max.): 3,200 mm, type of input current: three-phase, front table length: 3,200 mm, total width: 6,220 mm, input current: 32 A, total height: 2,000 mm, working width: 2,270 mm, total length: 11,510 mm, input voltage: 400 V, cutting height (max.): 110 mm, working height: 120 mm, input frequency: 50 Hz, Equipment: safety light barrier, The Zünd G3 XL-3200 is a professional digital cutting and routing machine with a working area of 2,270 x 3,200 mm and three module positions. The machine is suitable for both sheet and roll materials and features a conveyor for automatic material transport. The conveyor belt is in excellent condition. Maintenance performed by Zünd, last time on 17-08-2026. The material pass-through is 120 mm. With suitable tooling, materials up to 110 mm thick can be processed. This includes a POT Pneumatic Oscillating Tool with an 8 mm stroke and long 1.5 mm oscillating blades. This combination is suitable for cutting thick and soft materials. The machine features two UM-120 Universal Modules for various cutting, creasing, and marking tools, and an RM-120 routing module. The main tools are: UCT Universal Cutting Tool for standard blade cutting. PPT Passe-Partout Tool for 45° cuts. POT Pneumatic Oscillating Tool for thick and soft materials, with blades up to 110 mm cutting depth. RM-120 Routing Module with a 1 kW high-frequency routing spindle and a 6 mm collet. Set of 6 mm milling cutters for, among other things, foam. This allows the machine to cut, oscillate cut, make 45° cuts, route, drill, and engrave. Automatic tool initialization (ITI) ensures the setting of cutting and routing tools. For material transport, the G3 is equipped with a conveyor belt, a 1,600 mm infeed extension, and a 3,200 mm outfeed extension. In addition, a transport beam, extra drive, and a passive roll-off unit are included. The roll unit can handle material rolls up to Ø350 mm and a maximum of 70 kg. A material guide roll reduces wrinkles and creases during infeed. Knsdpfx Akszu Tcfo Asa To secure the material, the machine has a self-regulating vacuum turbine of 1-9 kW. The integrated ICC color camera handles the recognition of registration marks and supports, among other things, border recognition, best-fit, fit-to-object, and fit-to-job. This allows printed materials to also be cut accurately. The machine is controlled with Zünd Cut Center V3.x. The configuration includes Cut Server, Cut Manager, Cut Editor, Cut Queue, Routing Option, and Camera Option. Jobs can be processed automatically via hotfolders. A wireless barcode scanner allows for automatic loading of jobs from the queue. The complete machine configuration is approximately 9,510 x 4,220 mm. Approximately 11,510 x 6,220 mm of floor space is required. The minimum ceiling height is 3,000 mm; due to the guidance of the routing module, a minimum of 3,200 mm must be taken into account for this configuration. Technical connections: 3-phase 323-457 V, 50 Hz, minimum 32 A. 30 mA type B residual current device (RCD). Compressed air 0.8-1.0 MPa (8-10 bar). Compressed air capacity 400 l/min. Minimum floor load 200 kg/m². Industrial dust/chip extraction for routing work. Extraction capacity at least 3,150 l/min, 22-25 kPa, and Ø45 mm connection. In short: a fully equipped Zünd G3 XL-3200 with a cutting area of 2,270 x 3,200 mm, a material pass-through of 120 mm, and processing of materials up to 110 mm thick with suitable tools. The combination of UCT, PPT, POT, and 1 kW RM-120 allows the machine to cut and route a wide range of materials. The conveyor, automatic material feed, roll processing, camera recognition, and workflow automation make the machine suitable for both single pieces and automated production.

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rotor width: 200 mm 2 x 12 rotor blades 2 + 1 stator blade Kodpsyr Tlcefx Ak Aena Inlet cross-section approx. 350 x 200 mm Drive motor 15 kW The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up.

Condition: used, machine/vehicle number: 12248, Rotor diameter: 300 mm Rotor width: 600 mm Kedpfxoyr Tnwj Ak Ajna 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 300 x 600 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 12258, Rotor diameter: 350 mm Rotor width: 450 mm 3-blade rotor 2 rows of stator blades Inlet cross-section approx. 350 x 450 mm Ksdeyr Tn Dspfx Ak Asna Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 11648, Roller feeder on the hopper Rotor blade rows: 3 Knsdpfx Akeyr Tmaj Aoa Stator blade rows: 2 Rotor width: 520 mm Rotor diameter: 340 mm Inlet dimensions: 500 x 350 mm

Condition: used, machine/vehicle number: 11056, 3-blade rotor 2 rows of stator blades Rotor diameter: 350 mm Working width: 600 mm Inlet cross-section: approx. 600 x 450 mm Kodpfx Akeyr Tihs Aena Machine with noise protection box

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Ksdpfxjyr I E Ro Ak Aona Rotor diameter: 200 mm Width: 880 mm Rotor blades: 3 Stator blades: 2 Drive: 5.5 kW

Condition: used, machine/vehicle number: 13110, Rotor diameter: 260 mm Kedpfx Akoyr Tvbe Ajna Rotor width: 400 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 400 x 340 mm Drive motor: 11 kW