Used Econo Cut for sale (14,515)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 30,600 h, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2017. It features a Wire Guide Set for Ø 0.250 mm and a Taper Tapering Kit for 45° taper cuts. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. Nsdpfez Hwt Aex Ai Aslh - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Njdpfxez Hxfaj Ai Aslh Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Cutting mill / Cutting mills Nljdpfsz Hxkcox Ai Ajh Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Behringer HBP 650/800 Line is fitted with full automatic loading and unloading tables. Band dimensions: 10.000 x 67 x 1,6 mm Nsdpfeyma Igox Ai Aolh Single cut: - Round: 800 mm - Rectangular: 800 x 780 mm - Flat: 1000 x 750 mm Minimal: - Round: 50 mm - Rectangular: 50 x 20 mm Band dimension: 10.000 x 67 x 1,6 mm Single cut : Round: 800 mm Single cut : Rectangular: 800 x 780 mm Single cut : Flat: 1.000 x 750 mm Minimal : Round: 50 mm Minimal : Rectangular: 50 x 20 mm

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display Njdpjy Umdljfx Ai Ajlh - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, New Single-head cutting machine OMC GIOBI 600 (year 2021) with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m (year 2025) and inlet conveyor PORTER 4,2m (year 2025) Condition: new, demo machines - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm Nlodey Erwfspfx Ai Ajh - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Condition: used, Year of construction: 2012, operating hours: 99,097 h, working height: 45 mm, power: 6.5 kW (8.84 HP), working length: 2,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nlsdpez Ekhdsfx Ai Ash Maximum working length: 2,600 mm Maximum working height: 45 mm MACHINE DETAILS Installed total power: 6.5 kW Operating hours (according to the meter): 99,097 h The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6063

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Nlodefnlkwopfx Ai Aeh Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material Nsdpfowgc I Rox Ai Aslh • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2006, functionality: fully functional, cutting width (max.): 1,700 mm, cutting length (max.): 1,960 mm, Equipment: safety light barrier, We are offering this used Kongsberg XL-22 paper cutting machine, manufactured in 2006, for sale. Nodpfx Ajz S Ntyoi Aslh PICK-UP MUST BE COMPLETED BY THE END OF OCTOBER! It cuts perfectly and has recently been serviced; that is why the Gamma image cover is not attached. All covers are available. A vacuum pump is also included. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, TREIF FOX-CE /F | Automatic slicer / Meat and cold cut portioning machine Manufacturer: TREIF Maschinenbau GmbH Model / Type: FOX-CE /F (Type: 3421) Serial number: 342106.61569.0558 Year of manufacture: 2000 Power supply: 400 V / 230 V, 50 Hz, 3N~, 6.2A, protection: 10 A Power: 2.60 kW Net weight: 204 kg Nlodpfsz S N Ukex Ai Aoh Overall dimensions of the machine: 2000x600x1400mm Cutting capacity: up to 180 cuts/min Slice thickness adjustment: Continuous adjustment in the range of 0.5 – 25 mm The Treif FOX-CE /F is a well-established industrial slicer and portioning machine, designed for the precise portioning of fresh, chilled, and lightly frozen raw materials (up to -4°C) with or without bones. The machine is widely used in meat processing plants, butcher shops, supermarkets in the cutting departments, as well as in catering companies and food processing plants. The machine is characterized by a dynamic and repeatable cutting process thanks to the rotating knife system and the hydraulic drive of the feed of the pressure plate. The considerable length of the loading chamber enables the processing of long pieces (e.g., loin, neck, bacon, cold cuts), which translates into high work efficiency and minimized loading downtime. The continuous slice thickness adjustment system, located directly on the front control panel, allows the operator to quickly adjust the parameters to the current production needs.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L Nlodpfxoy Alcis Ai Ash • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 84,893 h, machine/vehicle number: A0420A0151, control type: CNC control, controller manufacturer: Siemens, controller model: Siemens Sinumerik 840D (TRUMPF MMC), laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF 3200, laser hours: 32,832 h, laser power: 3,200 W, type of cooling: water, year of last overhaul: 2019, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, TRUMPF Trumatic Lasercell 1005 – 3D Laser Welding System (3.2 kW) Used, ready-to-use 3D laser welding system (Type TLC 1005) Special modification for 3D laser welding (adapted beam guidance) Laser cutting is not possible in the current configuration Special version with a powered rotary table for highly precise round and multi-sided processing Basic data & performance: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Model: Trumatic Lasercell 1005 (Type TLC 1005) Year of manufacture: 2005 Laser power: 3,200 W (Resonator TRUMPF TLF 3200) Serial number: A0420A0151 Connected load: 68 kVA Operating hours: Processing time (beam on): approx. 32,832 h (pure welding time with active laser beam) Operating time (laser on): approx. 84,893 h (total operating time of the resonator incl. standby) Condition, scope of delivery & history: Scope of delivery includes cooling unit (chiller) and Herding dust extraction/ventilation system (Type DELTA 1200-12/9 SC, year 2004) The system was taken over from a VW plant in 2019 Professional installation, technical commissioning and inspection carried out by GIMTAS in September 2019 Sale & processing: On-site inspection possible after prior arrangement Nedpfx Aioz Rziko Ajlh Price negotiable Dismantling and transport preferably carried out by the buyer

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 36,167 h, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 4,000 mm, table width: 2,000 mm, workpiece weight (max.): 1,850 kg, type of cooling: water, overall weight: 110,000 kg, total length: 12,600 mm, total width: 1,080 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, Prima Power Laser Genius LGf 2040 – 4 kW – Year 2019 For sale: Prima Power Laser Genius LGf 2040, a high-performance fiber laser cutting machine manufactured in 2019, with a laser power of 4,000 W and a working format of 4,000 × 2,000 mm. This Italian-made machine is equipped with linear motor technology, providing high travel speeds, excellent dynamics, and high precision. The Laser Genius series is designed for intensive industrial production and cutting of carbon steel, stainless steel, aluminum, copper, and other metals. Key technical data: Manufacturer: Prima Power / Prima Industrie S.p.A. Model: Laser Genius LGf 2040 Year of manufacture: 2019 Serial number: Z3.03.02.09 Nodpfxszz N Dfj Ai Aelh Technology: Fiber laser Laser power: 4,000 W / 4 kW Working area: 4,064 × 2,032 mm Z-axis stroke: 150 mm Maximum X/Y speed: 200 m/min Maximum simultaneous speed: 240 m/min Positioning accuracy: 0.03 mm Repeatability: 0.03 mm X/Y drive via linear motors Automatic table exchange system Approximate machine weight: 11,000 kg Approximate maximum cutting capacities with 4 kW: Carbon steel: up to 20 mm Stainless steel: up to 15 mm Aluminum: up to 8 mm Copper: up to 8 mm The machine stands out for its large format of 2,000 × 4,000 mm, high dynamics, and precision, making it a particularly suitable solution for industrial sheet metal production. Machine available for inspection. More information, photographs, operating hours, and additional equipment are available upon request.

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase Nlsdpfx Aijy D U Dfe Aoh System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Nljdezwylxopfx Ai Ash Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: used, Year of construction: 2022, sheet length: 3040sheet thickness: 13,0total power requirements: 30weight approx.: 13,4messurements (LxWxH): 3850 x 2300 x 2260CNC Guillotine Shear DENER AS 3013 – Young Machine Ex Works – including loading onto truck For sale is a very young CNC guillotine shear DENER  AS 3013. The machine is in very good condition and is being sold due to a factory closure. The price already includes: - Loading onto truck - Immediate availability by arrangement (Location St. Pölten)  The machine can be inspected  by prior appointment. If you are interested or have any questions, please do not hesitate to contact us. Technical Data Sheet thickness: 13 mm Nsdpfx Aiezw Rv Uj Aelh Cutting length: 3,040 mm Cutting angle: 0.5–3° Number of hold-downs: 16 Back gauge: 1,000 mm, CNC-controlled Motor power: 30 kW Cutting speed (0.5–3°): 17–8 cuts/min Throat depth: 350 mm Oil tank: 400 litres Length: 3,850 mm Width: 2,350 / 3,270 mm Height: 2,260 mm Weight: 13,400 kg Equipment- Swing beam design - CNC control for:- Back gauge - Cutting angle - Cutting gap - Cutting length - Ball screws for the back gauge - Ball transfers in the table - 2 × support arms, 1,000 mm - Cutting line illumination - Foldable finger guard up to 1,000 mm Including pneumatic sheet metal support system!

Condition: used, Year of construction: 2000, sheet length: 4100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000Stroke/min: 8 Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot Nodpfozd H U Hsx Ai Aelh - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: -

Condition: used, Year of construction: 2011, CNC gantry plasma cutting machine Manufacturer: Eckert Type: Jantar 2 Year of manufacture: 2011 CNC control Working area: 2 x 4 m 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console Extraction table 191026ä Nsdpfxjy Nqcbe Ai Aelh

Condition: excellent (used), Year of construction: 2016, Technical specifications: Automatic cutting and beveling machine Pipe diameter: 50 – 330 mm Njdpfx Aewlahlsi Aolh Max. sheet thickness: 15 mm Cutting angle: 30 – 37.5° CNC control: PRO-Face Motor power: 30 kW CE mark Dimensions (length x width x height): approx. 3100 x 2600 x 2000 mm Machine weight: approx. 3.6 tons Additional equipment: 2 roller conveyors, each 6000 mm wide Chip conveyor The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2014, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 5,000 mm, total length: 8,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, working length: 5,000 mm, working width: 3,000 mm, We offer this Soitaab 3 x 5-meter cutting area waterjet cutting machine in excellent condition, featuring a bevel cutting function, manufactured in 2014. High-pressure pump: Hypertherm Hypresicion 50, 37 kW. Manufacturer: Soitaab Njdpfoz Ncz Dex Ai Aolh Model: Watertech 3050 Year of manufacture: 2014 Machine type: Waterjet cutting machine If you have any questions or require further information, please contact us via message or by phone.

Condition: used, Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and marking defects (using fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: - Cutting height: 260 mm - Saw blade diameter: 500 mm - Input length: 400 – 6,300 mm - Input thickness: 12 – 80 mm - Feed rate: max. 250 m/min - Cycle time: approx. 1 sec - Saw motor: 7.5 kW - Marking station: 5,000 mm Nljdpszryupjfx Ai Ash - Outfeed conveyor: 7.5 m with 1 pneumatic ejector - Control system: OptiCom Pro

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: BRP2014C04, type of input current: three-phase, input voltage: 400 V, input current: 24 A, compressed air connection: 6 bar, We offer this used Meevo MKF MKF BR 320 fabric cutting machine, year of construction 2014. Machine type: Textile Cutting Machine Year of manufacture: 2014 Voltage: 400 V Current: 24 A Pressure: 6 bar Frequency: 50 Hz Short-circuit current: 10 kA Weight: 1500 kg Number of phases: 3 Nlodpezg Tu Sefx Ai Aoh If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Uchida BC 10 Business Card Cutter Nlsdpfxoivd Aie Ai Aoh The UCHIDA BC-10 business card cutter is a business card cutting machine that works in conjunction with any high-quality digital copier or printer to automatically, easily, and quickly produce professionally cut business cards. Whether you are a small business or a large corporation that produces hundreds of cards per day, the innovative features applied to the UCHIDA BC-10 will meet every need. • Designed exclusively for business cards from A4 paper • Up to 100 business cards per minute • Simple and fast operation Specifications Processing speed: 10 sheets per minute (100 business cards) Paper size: A4 Paper type: Offset, coated, glossy paper Tolerance: ±0.1 mm Item condition: used Scope of delivery: as shown (without sheet feeder & trash box) You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, machine/vehicle number: 13276, Rotor diameter: 450 mm Rotor width: 300 mm Nsdpfoyr Twfox Ai Aelh Rotor blades: 9 Stator blades: 2 Inlet cross-section approx. 370 x 170 mm Drive motor: 45 kW