Used Eddy Current for sale (6,780)

Condition: used, Year of construction: 2018, operating hours: 7,293 h, total height: 9,500 mm, total length: 34,500 mm, total width: 14,550 mm, Production year: 2018 Model: 10HM Drake Number of operating hours: 7293 h Minimum space requirements: 34500mm x 14550mm x 9500mm Electric motor power (Siemens): 550 kW Gbjdpfx Ajzmul Esl Uou Working shaft width: 1000 mm Configuration: 10 hammers, 3-2-3-2 arrangement (weight per hammer: 105-117 kg) Capacity: 14 tons/hour Magnetic separator (steel) – 2 units Eddy current separator (non-ferrous metals) Drum screen Spare parts: Flap, 3 sets of hammers, pins, conveyor belts, sensors, 6 screens, gearboxes If you have any questions or require further information, please send a message or contact us by phone.

Year of construction: 2008, condition: good (used), functionality: fully functional, Complete Industrial Recycling Line for Plastic and Non-Ferrous Metal Separation A presentation video is available. A presentation video of the complete recycling line, recorded before dismantling, is available and can be provided to interested buyers upon request. The video shows the complete configuration of the installation prior to disassembly. A complete industrial recycling line, suitable for processing rigid plastics and other recyclable materials, is offered for sale. The installation is in good overall condition, featuring a robust industrial design and high-quality European components. Main components: Feed hopper MEM 46 MG Hammer Mill (Italy) IFE Vibrating Feeder / Vibrating Screen Eddy Current Separator Conveyor belts Electrical control cabinets Steel supporting structure Technical information Hammer Mill Manufacturer: MEM – Società Generale Macchine Edili S.p.A. (Italy) Model: MEM 46 MG Year of manufacture: 2008 Hammer Mill Weight: approx. 7,080 kg Suitable for processing: Rigid plastics (PVC, PE, PP, ABS, PC, etc.) Plastic profiles Plastic containers Mixed recyclable materials Non-ferrous metal recovery Aluminum separation Gsdpsznmgqjfx Al Uobu Advantages: Complete recycling line Heavy-duty industrial construction European manufacturers Robust and reliable equipment Ready for installation Ideal for recycling companies looking to increase processing capacity The line can be inspected by appointment. Additional photos and videos are available upon request.

Year of construction: 2002, condition: used, functionality: limited functionality, Sand processing plant for the production of high-quality sand with a grain size of 0-2 mm. For sale is a complete sand processing plant from the Rheinstetten-Forchheim gravel and sand works of Heidelberg Materials Mineralik DE GmbH. The plant was used for cleaning sand, removing organic contaminants, and producing sand with defined quality characteristics. Key technical data: Gbjdpfxezx Uyts Al Uju Throughput capacity up to 200 t/h Processing of sand 0-2 mm Production of controlled sand 0-2 mm allflux® AFX-F 750 fluidized bed classifier Solid material throughput up to 200 t/h Mixture volume approx. 375 m³/h Machine weight approx. 8 t allflux® AFS-F 500 eddy current classifier Solid material throughput up to 60 t/h Grain size 0-0.25 mm Fine sand recovery with hydrocyclones 3 dewatering screens for fine, medium-fine, and coarse sand Reversible conveyor belts Silo system with 6 buffer silos, each with a capacity of 220 m³ Dosing system with 8 dosing belts and 8 electric discharge gates Scope of supply: allflux® AFX-F 750 fluidized bed classifier Fine sand recovery with hydrocyclones and arch screen allflux® AFS-F 500 eddy current classifier 3 dewatering screens Fine sand recovery for coarse sand Fine sand recovery for medium-fine sand Conveyor technology Silo system Dosing system

Condition: refurbished (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: NE100230E50133, protection type (IP code): IP55, overall weight: 2,100 kg, input voltage: 400 V, belt width: 950 mm, STEINERT NE 100 220 E50 Eddy Current Separator | Non-Ferrous Metal Separator | Fully Refurbished Gbodozd Srwepfx Al Uou For sale: a STEINERT eddy current / non-ferrous metal separator, type NE 100 220 E50, used for recovering non-ferrous metals (aluminum, copper, brass, etc.) from bulk material streams such as shredder residue, Zorba/shredder NE-mix, slag, or similar feedstocks. The unit has been fully refurbished – new conveyor belt, new control system – and is in excellent, ready-to-run condition (see photos). Solid steel frame base, compact footprint, available immediately. Technical data: Manufacturer: STEINERT Elektromagnetbau Type: NE 100 220 E50 Feed width: 950 mm Belt speed: 0.5–2.0 m/s (mechanically adjustable via handwheel) Belt drum drive: 2.2 kW, IP 55 (variable gearbox IP 44) Magnet system drive: 4.0 kW, IP 55 Magnet system: fixed field frequency, adjustable up to 45° Particle size range: 5–140 mm (version E5013: 5–100 mm / E5005: 25–140 mm) Rated throughput (datasheet): approx. 10 m³/h Field-tested throughput: Zorba / shredder NE-mix 20–100 mm: approx. 5–8 t/h light, loose material: approx. 3–6 t/h heavy, uniform material: approx. 8–12 t/h Protection class (overall unit): IP 55 Permissible ambient temperature: -10 °C to +35 °C Total weight: approx. 2,100 kg Condition: fully refurbished – new belt, new control system

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. Gbedozl Shzopfx Al Uou • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: used, mileage: 171,821 km, power: 100 kW (135.96 HP), first registration: 12/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 8, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Refurbished and newly painted MB Vario 814D from government/federal police ownership. Equipped as a bus (group vehicle) MR / high-roof with full air conditioning and auxiliary heater, ABS, driver airbag, and differential lock on the rear axle, as well as a retarder, which is an electrically operated, wear-free eddy current brake for speed adjustment. We completely refurbished the body in our own workshop and professionally repainted it in two colors. Only the center section of the roof is still original. For such work, we employ a qualified body builder as well as a qualified vehicle painter. In the area of body repair, we are able to manufacture sheet metal in any form and weld it in professionally using a low-distortion welding process at low temperatures. In our special 18-meter long and 6-meter high paint booth, we can also professionally powder-coat such large vehicles at 80°C. This ensures high quality and a vehicle that retains its value, and you will enjoy it for a long time. We have replaced the windshield and the crank windows in the cab with real glass. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. Technically, this Vario has been recently serviced and is in good condition, with no pending repairs - it has been consistently maintained according to the service schedule. The last inspection was carried out in 09/2025 at 171,635 km, the last engine oil change in 10/2024 at 169,714 km. Currently, the front brake pads have been replaced, the tires have been renewed (M+S as steering profile), the chassis has been lubricated, and the cartridge of the air dryer has been replaced. The tires on the rear axle (M+S) have a tread depth of 8.0mm. All components such as the engine, transmission, and rear axle are dry. The air conditioning and auxiliary heater are functional and very effective: 1.) The air conditioning has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulating heater with convectors in the passenger compartment for draft-free heating. Maximum speed Vmax according to registration certificate: 120 km/h. Gedpfx Aljz Nuhws Ujbu A total of 11 seats, the seats in the passenger compartment are designed as reclining seats - with adjustable backrests and armrests; furthermore, the left inner seats can be moved inwards on the console by approximately 10cm to provide more room. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH). For an additional cost of 750 €, we can carry out a technical modification to convert it into a motorhome. Due to space constraints, up to 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. We will provide the Vario with a new TÜV/AU (technical inspection/emission test) certificate upon delivery - it drives well and the transmission can be shifted precisely. +++Errors, changes, and prior sale are subject to change.

Condition: used, Year of construction: 1993, Name: Industrial decanter Manufacturer: Alfa Laval NX 4045 Type: 919B-31G Year built: 1993 Max. bowl speed: 3250 1 / rpm Material: Edelstahl Stainless Steel Driving force: 18,5 / 21 kW Inner diameter drum: 353 / 198 Interior drum length: 1200 mm Gbodpfxewid Nhe Al Usu Permissible sediment density: 1,2 kg / dm3 Dimensions: Length 3000 x width 1000 x height 1150 mm Empty weight: 2500 kg Technical doc.: Yes Message: Eddy current brake Accessories: A control cabinet Condition: Second hand Price: On demand

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 161/1-10, functionality: fully functional, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, overall weight: 1,500 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 7 1st unit: Pre-milling unit 2nd unit: Gluing unit 3rd unit: Pressure rollers 4th unit: Edge trimming unit 5th unit: Rough milling unit 6th unit: Corner rounding unit 7th unit: Edge planing unit MACHINE DETAILS Voltage: 400 V Current consumption: 38.85 A Fuse rating: 50 A Dimensions & Weight Dimensions (L x W x H): 5,500 x 1,500 x 2,580 mm Weight: 1,500 kg Godpfx Aloz Ni Rms Usbu EQUIPMENT Tools: Pre-milling unit Gluing unit Tools: Pressure rollers Tools: Edge trimming unit Tools: Rough milling unit Tools: Corner rounding unit Tools: Edge planing unit CE marking

Condition: used, mileage: 147,717 km, power: 100 kW (135.96 HP), first registration: 04/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency/federal police. Configuration as a bus (group transport vehicle) MR / high roof with full climate control and auxiliary heater, ABS, driver airbag, and differential lock on the rear axle, as well as a retarder, which is an electrical, wear-free eddy current brake for adjusting the speed. Before sale, the windshield will be replaced with real glass. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. Furthermore, before sale, the bases and deflector shields of the former roof-mounted rotating lights will be removed from the roof. The mounting holes will then be permanently sealed by us with metal plates and body adhesive. Gsdpezr Ayhsfx Al Ujbu Also, before sale, we will dismantle the rear wooden cabinets. This also creates space for a motorhome interior. Technically, this Vario is in good condition and does not require any immediate repairs; it has been consistently maintained according to the service schedule. During the last service, the engine oil pan was also replaced. All components such as the engine, transmission, and rear axle are dry. The air conditioning and auxiliary heater are functional and very effective: 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulating heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to the vehicle registration document: 120 km/h A total of 11 seats, the seats in the passenger compartment are designed as reclining seats - with adjustable backrests and armrests, and the left inner seats can also be moved approximately 10 cm forward on the console to provide more room for movement. A total of three effective roof vents. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH) For an additional charge of €750, we can carry out a technical modification to convert the vehicle into a motorhome by removing some seats. Due to space constraints, up to 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. However, the Vario would also be roadworthy without these body modifications; it drives well, and the transmission shifts precisely. +++ Errors, changes and prior sale are reserved.

Condition: used, OTO MILLS Complete tube mill 168.7 With top of the range equipments OTO MILLS line, EUROLLS rolling, THERMATOOL welding, MAIR packaging machine, BLISSENBACH internal deburring, etc. COMPLETE Tube Mill 168.7 with: 1. OTO MILLS Entry line 2. OTO MILLS 168.7 Forming and sizing system 3. OTO MILLS Cutoff and runout system 4. Electrical and electronic parts 5. Hydraulic power units 6. EUROLLS Complete sets of tooling & spares 7. THERMATOOL HF welder CFI500 kW 8. FOERSTER Online eddy current 9. COTIMPI End facing unit | 6m to 12m length 10. COTIMPI 280 Bar hydro testing unit Gbsdpfx Alexv Aacs Uou 11. FOERSTER Offline eddy current: Main bed with drive unit; Testing devices 12. MAIR Automatic packaging machine – Mps Rh200/D/6/Sl 13. BLISSENBACH Tube inside scarfing system – Tube Range I.D. 45 To 165mm Tube diameter: 60,3 – 168,2 mm Square sections: 50x50 – 140x140 mm Rectangular sections: 60x40 – 160x100 mm Thickness: 2,0 – 7,1 mm Tube length: 3 - 12 m Speed: 90 m/min Entry line: OTO MILLS Forming and sizing system: OTO MILLS 168.7 Cutoff and runout system: OTO MILLS Complete sets of tooling & spares: EUROLLS HF Welder: THERMATOOL 500 kW Online eddy current: FOERSTER End facing unit: COTIMPI 6m to 12m length Bar hydro testing unit: COTIMPI 280 Offline eddy current: FOERSTER Automatic packaging machine: MAIR Tube inside scarfing system: BLISSENBACH | Tube Range I.D. 45 To 165mm

Condition: used, mileage: 60,784 km, power: 100 kW (135.96 HP), first registration: 12/2002, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2002, Equipment: ABS, parking heater, Beautiful MB Vario 814D from official ownership / state police: +++ Bodywork thoroughly refurbished and partially repainted on the lower sections +++ Version configured as a bus (group transport vehicle) MR / high-roof with auxiliary heating, driver airbag, ABS, and differential lock on the rear axle, as well as a retarder. The retarder is an electric, wear-free eddy current brake for speed adjustment. The bodywork was professionally repaired and then the rear section was partially repainted in our own workshop. We disassemble the vehicles beforehand and, for example, permanently seal the body seams with elastic material after painting. The chassis/frame of this Vario was also partially de-rusted and painted by us, and finally protected with wax for long-term preservation. Additionally, this Vario received a fresh inspection, including engine oil and brake fluid change, all four batteries replaced, and a new air dryer for the braking system. Furthermore, the plastic glazing in the cab was replaced with genuine glass. Due to their good insulating properties, the plastic windows were retained in the rear section. An ideal base for a spacious motorhome — the technical conversion to "So-KFZ Wohnmobil" registration (special-purpose vehicle/motorhome) can be carried out for you for an extra charge of €600. In this context, the vehicle would also receive an exterior 220V power connection with RCD/FI circuit breaker and two interior sockets. General information about the MB Vario 814D: The auxiliary heating works very efficiently: This is a hot water circulation heating system with convectors in the passenger compartment for draft-free heating. Top speed thanks to long axle ratio: according to paperwork, vmax 120 km/h. Total of 11 seats; the passenger compartment seats are comfortable recliners — with adjustable backrests and armrests. In addition, the left inner seats can be shifted about 10 cm into the aisle for more freedom of movement. There are three effective roof hatches in total. Gbodpfxjyxuv Do Al Uju Interior dimensions from the driver’s seat: 4000 x 1850 x 1900 mm (L x W x H) +++ Subject to error, changes, and prior sale +++

Condition: used, mileage: 133,344 km, power: 100 kW (135.96 HP), first registration: 01/2004, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency / Federal Police. Configured as a bus (group vehicle) MR / high roof with full climate control and auxiliary heater, ABS and differential lock on the rear axle, as well as a retarder, which is an electric, wear-free eddy current brake for speed adjustment. The windshield will be replaced with real glass before sale. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear part of the vehicle can remain. Furthermore, before the sale, the bases and deflectors of the former roof-mounted rotating lights will be removed. The mounting holes will then be permanently sealed by us with metal plates and body adhesive. Also, for the sale, we will remove the rear wooden cabinets. This also creates space for a camper van conversion. Technically, this Vario is in good condition and does not require any immediate repairs – it has been regularly serviced according to the service schedule. All components, such as the engine, transmission, and rear axle, are dry. The air conditioning and auxiliary heater are functioning and very effective: Gbedpfxezthrlo Al Uju 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulation heater with convector vents in the passenger compartment for draft-free heating. Maximum speed Vmax according to the vehicle registration document: 120 km/h. A total of 11 seats, the seats in the passenger compartment are designed as reclining seats – with adjustable backrests and armrests, and the left inner seats can be moved approximately 10 cm forward on the console for more freedom of movement. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (L x W x H). For an additional charge of €750, we can perform a technical modification to convert it into a camper van, which would involve removing some seats. Due to space constraints, up to 8 seats are possible in this configuration. In this context, the Vario will also receive a 220V external power connection. However, the Vario would also be roadworthy without these body modifications; it drives well, and the transmission shifts precisely. +++ Errors, changes and prior sale reserved.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 559 mm, travel distance Z-axis: 660 mm, controller manufacturer: Milltronics, controller model: Centurion 7, total height: 2,740 mm, total length: 3,050 mm, total width: 2,440 mm, table width: 610 mm, table length: 1,016 mm, overall weight: 7,250 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 2007 Milltronics VM22 CNC Vertical Machining Centre Used 2007 Milltronics VM22 vertical machining centre for sale. Centurion 7 control, 1016 x 559 x 660mm travels, 8,000 rpm spindle, 24-tool ATC and tooling included. Manufacturer: Milltronics Model: VM22 Machine Type: 3 Axis Vertical Machining Centre Year: 2007 Control: Centurion 7 Includes: Large Selection of Tool Holders Machine Description Used 2007 Milltronics VM22 CNC Vertical Machining Centre available for sale. A substantial American-built 3-axis vertical machining centre offering a generous working envelope, 24-station automatic tool changer, 8,000 rpm spindle and the well-established Milltronics Centurion 7 CNC control. Gbjdpfx Alsz Rqcye Uou This particular machine is a VM22 Series B and is supplied with a large selection of tooling, making it an attractive package for general precision engineering, subcontract machining, toolroom work, mould work and batch production. The VM22 provides approximately 1,016mm X-axis travel, 559mm Y-axis travel and 660mm Z-axis travel, combined with a large 1,143 x 610mm table. Technical Specifications Manufacturer: Milltronics Manufacturing Company Model: VM22 Series: B Year: 2007 Machine Type: CNC Vertical Machining Centre / Vertical CNC Milling Machine Control: Milltronics Centurion 7 Number of Axes: 3 Serial Number: 9868 Axis Travels X-Axis Travel: Approx. 1,016mm / 40" Y-Axis Travel: Approx. 559mm / 22" Z-Axis Travel: Approx. 660mm / 26" The 40" x 22" x 26" working envelope is one of the defining specifications of the VM22. Worktable Table Size: Approx. 1,143 x 610mm / 45" x 24" The large table and 22" Y-axis travel provide useful capacity for larger components, multiple vices and production fixtures. Spindle Maximum Spindle Speed: Approx. 8,000 rpm Spindle Power: Approx. 24 HP / 18kW peak rating Spindle Taper: 40 Taper / CAT40-type specification The combination of a 40-taper spindle and substantial machine construction makes the VM22 suitable for both general milling and heavier material-removal work. Automatic Tool Changer Tool Capacity: 24 Tools The machine is equipped with a 24-position automatic tool changer, providing sufficient tooling capacity for multi-operation machining without frequent manual tool changes. Milltronics Centurion 7 CNC Control The machine is equipped with the Milltronics Centurion 7 CNC control. The Centurion series became particularly popular in toolrooms and general engineering companies because of its conversational programming capability while still supporting conventional CNC/G-code programming. This makes the machine particularly suitable for: One-off components Small-batch machining Toolroom work Subcontract machining Prototype manufacture Production milling Operators transitioning from manual to CNC machining Tooling Included A large selection of tooling is included with the machine. Electrical Specification Input Voltage: 400V Phase: 3 Phase Frequency: 50/60Hz Full Load Current: Approx. 50A Largest Load: Approx. 40A Approximate Machine Size & Weight Machine Length: 3,050mm Machine Width: 2,440mm Machine Height: 2,740mm Approximate Machine Weight: 7,250kg

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, type of input current: three-phase, Alfa Laval aldec 406/AVNX420 complete, reconditioned with eddy current brake. Gbodpfx Aoucrhuol Uju

Condition: used, TUBE MILL OTO MILLS 219.10 The OTO MILLS 219.10 is a heavy-duty tube mill, characterized by its rigid mechanical construction and its integration of high-tier industrial components, making it a stable continuous, high-quality industrial production line. Technical specifications · Manufacturer: OTO MILLS · Tube diameter: 88.9 - 219 mm · Square: 90x90 - 200x200 mm. · Rectangular: 20x60 - 250x150 mm. · Thickness: 2.5 - 10 mm. Gbodpfx Aleym Dbdo Ueu · Speed: Max. 80 m/min · Coil weight: Max. 16 Ton · Tube length: 6 - 12 m Scope of supply · Entry line · OTO 219.10 forming and sizing system · Cutoff and runout system · Electrical and electronic parts · Hydraulic system · Tooling · Thermatool HF welder cfi 600 kw · Double seam annealer (500 kw x 2) – Thermatool · Online Eddy current – Foerster · Semi-automatic packaging machine · Tube inside scarfing system – Alpha Metall Tube diameter: 88.9 - 219 mm Square: 90x90 - 200x200 mm. Rectangular: 20x60 - 250x150 mm. Thickness: 2.5 - 10 mm. Coil weight: Max. 16 Ton Tube length: 6 - 12 m Speed: Max. 80 m/min

Condition: used, mileage: 150,351 km, power: 100 kW (135.96 HP), first registration: 01/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency/federal police. Equipped as a bus (group transport vehicle) with a raised roof, full air conditioning, auxiliary heater, ABS, driver airbag, and a differential lock on the rear axle, as well as a retarder – an electrically powered, wear-free eddy current brake for speed adjustment. The body only has minor surface rust on the lower edges of the sills – no holes are present. There is a slight bulge on the rear wheel arch, but this is not relevant for the TÜV (technical inspection). Technically, this Vario is in excellent condition and does not require any immediate repairs – it has been consistently maintained according to the service schedule. We have already replaced both starter batteries, and before the sale, we will replace the windshield with a real glass one, making it suitable for private registration. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. The air conditioning and auxiliary heater are functional and very effective: 1) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2) The auxiliary heater is a hot water circulation heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to documentation: 120 km/h. A total of 11 seats, with the seats in the passenger compartment designed as reclining armchairs – with adjustable backrests and armrests. Furthermore, the left inner seats can be moved forward by approximately 10 cm on the console for more freedom of movement. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH). For an additional charge of €750, we can carry out a technical modification to convert it into a camper van by removing some seats. Due to space constraints, a maximum of 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. Gjdpszmqnpefx Al Uebu +++Errors, changes, and prior sale are subject to change.

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm Gsdpsmqkubsfx Al Uebu working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) Gedjmqkt Tjpfx Al Ujbu year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m Gbedpfxjmqkuue Al Ueu bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: used, machine/vehicle number: E11401004015, Year of construction: 2019, operating hours: 3,410 h, load capacity: 10,000 kg, lifting height: 3,500 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 10,000 kg Lifting height: 3,500 mm Fork length: 1,200 mm Fork cross-section: 145 x 90 mm Fork radius: 105 mm Fork adjustment range: 0 to 1,980 mm MACHINE DETAILS Drive type: Diesel Number of wheels: 6 Dimensions & Weight Dimensions: 5,600 x 2,550 x 3,155 mm Own weight: 17,510 kg Protective roof height: 3,000 mm UVV certification valid until: 08/2027 Starter batteries renewed: 01/2025 Operating hours: 3,410 h EQUIPMENT Former Linde full-service unit 3rd and 4th hydraulic valve Hydraulic fork adjuster Side shifter Full cab Air conditioning Heater Windshield wiper Multi-function display with touch function LED work light, front LED work light, rear Road traffic lighting with turn signals Additional work lights Rotating beacon Safety light, rear Motec camera with view of the fork tip (currently not functioning) Air-suspended comfort seat Comfort seat can be swivelled 17° to the right If the mast is too high, it can be disassembled for transport upon request and loaded accordingly. All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t possible with a large forklift on site. Loading is at your own risk. Gsdoz Iwimjpfx Al Uebu Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified timeframe, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 180,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 180,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Gbedpfx Alowdmy So Uju Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: mse mail inserter, Bluecrest epic mail inserter / folder processing speeds of 22,000 mailpieces per hour hi input Gbjdpfx Alszkli No Uju accumulator / folder 4 station chassis current windows barcode 2D reading cameras for mail matching

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 6.719, functionality: fully functional, cutting height (max.): 90 mm, saw blade diameter: 350 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Godpfxoz Ni S Ro Al Uebu TECHNICAL DETAILS Max. cutting depth: 120 mm Max. cutting height: 90 mm Max. saw blade diameter: 350 mm Saw blade bore diameter: 30 mm MACHINE DETAILS Voltage: 400 V Current consumption: 7.13 Fuse rating: 16 A Main motor power: 3.1 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 900 x 1,700 mm Weight: 500 kg Shipping packages: 1 piece

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS Gjdpfx Alsxmthrj Uobu DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Saw band length: 4,700 mm Tool dimensions: 13 × 0.65 × 24 TPI Guide roller diameter: 630 mm Cutting height: 350 mm Cutting width without rip fence: approx. 610 mm Cutting width with rip fence: 150 mm Loading height: 1,065 mm Cutting speed: 10–100 m/min Table travel: approx. 600 mm Table feed rate: 0.03–0.3 m/min MACHINE DETAILS Dust extraction connection diameter: 1 × Ø 120 mm + 1 × Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1,725 m³/h Operating voltage: 400 V / 50 Hz Gjdpoz Im Skefx Al Usbu Type of current: 3 × 400 V Fuse rating: max. 16 A Minimum conductor cross-section: 1.5 mm² Motor power: 0.75 kW Dimensions & Weight Dimensions (L x W x H): approx. 1,850 x 1,200 x 2,300 mm Machine weight: approx. 550 kg