Used Eddy Current for sale (5,637)

Condition: excellent (used), Year of construction: 2022, Max. working pressure PS: 13,00 bar Compressed air inlet temp. TS: 3 – 60 °C Ambient temperature: 3 – 50 °C Phases: 3 / Frequency: 50 Hz Voltage: 400 V Full load current: 17 A Gbsdpfx Asyhprqofnoh Full load current drive motor: 14 A Electrical diagram: STG-03000 00

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Gsdpfx Ajuzn Nnjfnebh Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: good (used), Year of construction: 2000, operating hours: 132,186 h, Absolute cycle counter: C120 = 062077965 Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 3000 Opening stroke (mm): 0-700 Mold installation height: 400-750 mm Gsdoyhnvhjpfx Afnebh Nominal voltage (V / Hz): 400 / 50 Nominal current (A): 99,5 Rated power (kW): 55 -With dosing system -Handling robot Wittman, available as an option upon customer request Condition: good condition (Oil leak, original monitor defective)

Year of construction: 2019, condition: ready for operation (used), overall weight: 1,800 kg, total height: 2,160 mm, This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine. Gsdpfex D Iwpsx Afnsbh Additional information • Operating mode: Automatic • Mitre cutting range: 0° – 60° • Drive: 3 kW, 3x400V, 50 Hz • Saw band size: 4780 x 34 x 1.1 mm • Material loading height: 770 mm • Shortest length of rest: 220 mm • One upstroke: 750 mm • Maximum weight of material: 2500 kg • Saw band speed: 20 – 120 m/min • Disconnected, currently cannot be operated, but was fully operational prior to factory relocation. • The seller can dismantle and load the machine for transport. • Not the main company bandsaw due to bulky size relative to material processed. Dimensions Machine Depth 3350 mm

Condition: excellent (used), Year of construction: 2004, operating hours: 97,919 h, Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 136 Gbedpfxeyhnrpe Afnoh Rated power (kW): 75

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Gsdpeyi Dbpjfx Afnebh Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: good (used), Busch SE 125 (175) Pile turner This machine is like new, fully functional, and ready to use. Gbjdpfx Afsyi A Uujnoh Manufactured in 2017. This turner is from the German manufacturer Busch. This is the current model in production. Extended stack height to 175 cm. Technical specifications: Format: 1250 x 900 mm Stack height: 1750 mm Load capacity: 1200 kg Device weight: 1000 kg 380 V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Gbodpfx Afexwdxconoh Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Gjdoyglb Sepfx Afnobh Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 24 m/min, feed length X-axis: 1,050 mm, feed length Y-axis: 540 mm, feed length Z-axis: 560 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Fanuc, controller model: OiMD, workpiece weight (max.): 1,300 kg, total length: 3,300 mm, total width: 2,280 mm, table width: 480 mm, table length: 1,200 mm, table load: 1,300 kg, overall weight: 6,600 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, distance table to spindle center: 550 mm, distance table center to spindle nose: 640 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 210 mm, tool diameter: 75 mm, tool weight: 7 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2014 Dugard 1000E 3-Axis Vertical Machining Centre – Very Good Condition 2014 Dugard 1000E 3-Axis Vertical Machining Centre in very good condition. Fanuc Oi-MD control, BT40 spindle, 10,000 RPM, 24-station ATC. Available now in Ireland. Machine Type: Vertical Machining Centre (VMC) Manufacturer: Dugard Model: 1000E Year: 2014 Control: Fanuc Series Oi-MD Location: Ireland Availability: Immediate Machine Overview Offered by Used Machine Tools Ireland, this 2014 Dugard 1000E Vertical Machining Centre is in very good condition and ready for immediate production. The Dugard 1000E is a highly respected UK-supplied VMC, known for its rigid cast-iron construction, powerful spindle, and reliable Fanuc control system. With generous travels, fast rapids, and a 24-station drum type ATC, it is well suited to both high-mix precision work and production machining. This machine represents an excellent opportunity to acquire a modern, professional-grade 3-axis machining centre with proven reliability and strong resale value. Key Features & Highlights 3-Axis Vertical Machining Centre Fanuc Series Oi-MD Control – industry standard, easy to program BT40 Spindle – strong tooling availability and rigidity 10,000 RPM Spindle Speed 24-Station Drum Type Automatic Tool Changer Rigid Cast-Iron Machine Frame – excellent vibration damping Fully Enclosed Guarding High-Power Cooling System Swarf Auger for Efficient Chip Removal Technical Specifications – Dugard 1000E Control Control System: Fanuc Series Oi-MD Display: 8.4” TFT LCD Colour Monitor Programming: Industry-standard Fanuc format Storage: PC Flash Card Support Axis Travel X-Axis Travel: 1050 mm Y-Axis Travel: 540 mm Z-Axis Travel: 560 mm Spindle Spindle Taper: BT40 Spindle Speed Range: 20 – 10,000 RPM Spindle Drive Motor: 11 / 15 kW Feed Rates Rapid Traverse (X / Y / Z): X & Y: 32 m/min Z: 24 m/min Tool Changer Automatic Tool Changer: 24 Station Type: Drum Type Toolholders: Included as seen in ATC Machine Construction & Equipment Heavy-duty, high-quality cast iron frame Rigid tapping Helical interpolation Automatic lubrication system High-power coolant system Fully enclosed safety guarding Gbedpfjyhqhysx Afneh Dimensions Machine Footprint: 3300 × 2280 mm Included with Machine ✔ Toolholders included (as currently loaded in the ATC) ✔ Swarf auger ✔ Coolant system ✔ Full enclosure Additional Notes Machine is in very good condition Well-specified and production-ready Specifications supplied in good faith but not guaranteed Ideal Applications Precision CNC milling General engineering & subcontract machining Aerospace, medical, electronics & automotive components Aluminium, plastics, and steel machining The Dugard 1000E is a solid, modern 3-axis VMC offering excellent performance, reliability, and value — an ideal addition to any precision machine shop.

Condition: used, Year of construction: 2013, Overview This shrink-wrapper was manufactured in 2013 by the Italian company OCME S.p.A.. The Vega HT 60/2 SE is a versatile film packer designed for wrapping PET, glass, or can containers into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a running line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides for square bottles and an optional bottle divider. A semi-automatic roll-lifting robot for film roll changes is also included. Optional outfeed conveyors can be provided on request. Technical data  Formats: From 0.25 L to 2.5 L; currently 1.5 L in 2×(3×2) packs Container types: PET, glass, and cans Application: All beverages and liquid products Machine configuration: Film only (with optional tray) Infeed: Adjustable guide for square bottles, bottle divider Outfeed: Optional pack conveyors Condition: Very good, immediately available Status: Installed as part of a line Gbodpfxjygkwls Afnjh

Condition: used, Year of construction: 2013, Overview  This monobloc filler for still water was manufactured in 2013 by the French company Gangloff-Scoma. The machine is designed for atmospheric filling of PET bottles ranging from 0.33 L to 2.5 L, currently configured for 1.5 L bottles with a 29/25 neck finish. The filler operates with a mechanical gravity filling system optimized for still water and can reach an output of up to 38,000 bottles per hour. It remains installed, in working condition, and is immediately available for inspection and use. Technical data  Application: Still water Filling System: Mechanical gravity (atmospheric) Capacity: Up to 38,000 bph Bottle Formats: 0.33 L – 2.5 L (currently set for 1.5 L) Neck Finish: 29/25 Gbedpfx Asygkv Ujfnsh

Condition: used, Year of construction: 2001, Overview  This rotary PET blow moulding machine was manufactured in 2001 by the French company SIDEL. The SBO20 S2 model is designed for the production of high-quality PET bottles in various formats, ranging from 0.33 L to 2.5 L, with the current setup configured for 1.5 L bottles and 29/25 neck finish. The machine remains in good operational condition, is immediately available, and can be integrated into existing production lines for beverages such as water, CSDs, or juices. Technical data  Application: PET bottle production Capacity: 28,000 bph Bottle Formats: 0.33 L – 2.5 L (currently set up for 1.5 L) Neck Finish: 29/25 Gbedpoygkvbjfx Afnsh

Condition: used, mileage: 333,678 km, power: 260 kW (353.50 HP), first registration: 10/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: silver, Equipment: ABS, air conditioning, parking heater, +++Pick-up price without MOT+++ +++Belgian documents+++ +++Collision damage+++ +++20 units available+++ +++Odometer reading: 333,678 km, actual mileage approximately 500,000 km+++ General Engine: Mercedes-Benz Emission standard: EURO 5 Total seats: 40 Seating: 31+8+1 (high/fixed) Standing places: 101 Transmission: Automatic Safety * ABS, ASR, EBS * Fog lights Passenger Compartment * Auxiliary heater * Wood-effect flooring * Air conditioning * Driver’s microphone * Pram/stroller space * Wheelchair ramp * Wheelchair space * Stop-request button * Interior camera Exterior * Matrix/destination display Hanover * Number of double-width doors: 4 * Lifting/lowering system * Power steering * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilator Other * Twin rear tires * Vehicle length: 17.94 m * Vehicle width: 2.55 m * Vehicle height: 3.10 m * Front axle tires approx. 30% * Middle axle tires approx. 30% * Rear axle tires approx. 30% Gjdpfx Afowzqb Isnsbh Our internal vehicle number: 11652 Subject to errors. Images and descriptions may differ from the actual vehicle. Over 300 vehicles in our current inventory.

Condition: used, Year of construction: 2023, load capacity: 4,500 kg, lifting height: 17,550 mm, total length: 7,400 mm, · Kippwinkel 10 ° · Schüttwinkel 107 ° Gsdpjyhrfmefx Afnobh · Lenkart: 2-rad Lenkung, 4-rad Lenkung, Crab Modus · Stützentyp: Flügeltyp · Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig · Hersteller: Deutz · Motornorm: Stage V / Stufe 4 · Motor Modell: TCD 3.6 L4 · Nennleistung Verbrennungsmotor / Leistung (kW): 55.92 kW / 55.40 kW · Max. Drehmoment / Engine rotation (min): 405 Nm @ 1300 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder: 4 - 3620 cm³ · Kühlsystem des Motors: Wasserkühlung · Anzahl Batterien / Batterie / Batteriekapazität: 2 x 12 V / 120 Ah · Battery starting current: (EN)850 A · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 2 · Max. travel speed: 25 km/h · Zugkraft: 9400 daN · Parkbremse: Automatische negative Parkbremse · Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen: 44.50 % / 44.50 % · Pumpenart: Verstellpumpe · Hydraulikfördermenge: 116 l/min · Hydraulikdruck: 275 bar · Motoröl: 11 l · Hydrauliköl: 144 l · Fassungsvermögen des Kraftstofftanks: 130 l · Lärm und Vibrationen: Geräuschpegel im Fahrerstand (LpA): 68 dB · Außenschallpegel (LwA): 106 dB · Vibrationswert an Händen/Armen: < 2.50 m/s² · Diverse Lenkräder (vorne / hinten): 2 / 2 · Steuerungen: 2 Joysticks · Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) standard

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,544 h, load capacity: 2,500 kg, lifting height: 3,360 mm, fuel type: diesel, mast type: simplex, construction height: 2,340 mm, fork carriage width: 1,175 mm, fork length: 1,200 mm, empty load weight: 4,077 kg, total length: 2,750 mm, drive type: Diesel, construction width: 1,180 mm, Diesel forklift Load center: 500 Fork width: 100 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for operation and fully functional Gbjdpfx Afoxr R Dneneh Technical condition: Very good Front tires type: Superelastic Front tires size: 225/75-10 Rear tires type: Superelastic Rear tires size: 225/75-10 Description: In addition to this Linde model, we currently have around 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Lease-purchase and financing options are always available at attractive terms. We are also happy to purchase your used vehicle outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with comprehensive advice regarding this H25D-01. P.S.: Our master forklift workshop specializes in repair, reconditioning, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Side shifter,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 197 h, load capacity: 1,600 kg, lifting height: 4,130 mm, free lift: 1,380 mm, fuel type: electric, mast type: triplex, construction height: 1,950 mm, fork carriage width: 980 mm, fork length: 1,100 mm, empty load weight: 3,275 kg, total length: 1,840 mm, drive type: Elektro, construction width: 1,100 mm, Electric 3-wheel forklift Load center: 500 mm Fork width: 80 mm Fork thickness: 40 mm Mast type: Triplex Condition: Operational and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 18x7-8 Rear tyres type: Superelastic Gedoxr R A Rjpfx Afnjbh Rear tyres size: 15x4.5-8 Battery voltage: 48V Battery capacity: 460Ah Battery year: 2019 Description: In addition to this Linde model, we currently have approximately 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-purchase & financing on attractive terms are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will be pleased to give you detailed advice on this E16C-02. P.S.: Our master forklift workshop specialises in the repair, maintenance, refurbishment and custom construction of forklifts from 8 tons upwards. We will also be happy to offer your vehicle for commission sale through us. Sideshift, Full free lift,

Condition: used, Year of construction: 2003, turning diameter 220 mm Control GE Fanuc 18i-TB x-travel 400 mm z-travel 450 mm tool taper VDI 40 number of tool places 12 Pos. Gbsdpfxeyf N D Ij Afnsh spindle tunring speed 6.000 U/min Number of working hours 10741 h work stroke 150 mm X-Achse range L-W-H 3100 x 2000 x 3200 mm weight 6500 kg rapid power traverse in X-and Z direction 60/30 m/min EMAG VL5 vertical lathe, built in 2003, very good condition, ready for use, but currently not in operation. Accessories: Extraction system 9 tool holders, 4 of which are driven tools 1 pallet Various workpiece carriers

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, Here, as a specialist dealer in injection moulding machines, we offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines currently in use. Year of manufacture: 2010. We have been wholesalers of used injection moulding machines for over 25 years. Current tax notice – Advantage for buying used machines: From 01/07/2025, used machines will also qualify for special tax depreciation of 30% per annum. In addition to the lower price compared to new machines, you can claim the same depreciation amounts as for a new machine. Keyword: growth booster (§ 7 paragraph 2 EStG-E). Currently in stock at our Hannover warehouse and tested. Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP thermoplastics Extras: 2 additional robots: Linear robots LRX 100 and LRX 50 can also be purchased separately - 2 x core pull (movable and fixed WAP) - Pneumatic valve 1 on fixed WAP - Accumulator for increased injection performance - Rapid SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Mould approach control - Cycle time analysis - External USB keyboard - Graphic analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on moving WAP for blowing out - 12 temperature control zones - Potential-free BDE contact - Process monitoring - Cycle storage - Trend graphic – target/actual diagram - PV control - Active back pressure control - Single-owner machine – sourced in Germany Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Max. opening stroke: 820 mm Min. mould height: 330 mm Max. opening: 1150 mm Gbjdpfsxqhuuex Afnoh Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g / PS Injection pressure: 2304 bar Robot LRX S50 - 3 gripper circuits – 4 vacuum circuits Robot LRX 100 - 1 gripper circuit – 4 vacuum circuits Electrical Equipment Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation and software manual Available immediately ex our Hannover warehouse or delivered to your location (delivery at cost). The machine is functionally tested and in our sole ownership. The requested machine is immediately available from our Hannover warehouse, functionally tested, and can be inspected under power. About our machines and company: – We only sell machines owned by us, purchased from ongoing production, from our Hannover warehouse – All machines are inspected and tested before disassembly – We do NOT sell insolvency stock – we are NOT brokers dealing with third-party property – All machines come from successful companies where maintenance and care are taken as a matter of course – All listed machines are available for viewing in our warehouse

Year of construction: 2013, condition: ready for operation (used), overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, This AMADA MEISTER G3 was manufactured in 2013. A robust surface grinding machine, it's ideal for precision metalworking. Consider the opportunity to buy this AMADA MEISTER G3 surface grinding machine. Please note that the FANUC controller was replaced; however, the machine is currently not operational. Contact us for more information. Machine Benefits Technical Machine Benefits Gbsdpfx Aex D Na Eofnjh • Suitable for heavy-duty operations. Extra Information Machine still under power Dimensions Machine Depth 6400 mm

Condition: used, Year of construction: 2011, machine/vehicle number: CA77, Technical Specifications & Performance Data The Robino & Galandrino Minibloc is a compact capsuling machine engineered for precise capsule application in beverage production and industrial packaging environments. Designed for integration into a used bottling line or as a standalone unit, this second hand machine combines reliable mechanics with efficient operation for consistent results on glass bottles commonly used in wine and premium beverage applications. Manufacturer: Robino & Galandrino Model: Minibloc Year of manufacture: 2011 Machine type: Capsuling machine Electrical supply: 400 V, three-phase Frequency: 50 Hz Input current: 1.2 A Frame concept: Compact miniblock layout for efficient floor space usage Advanced Automation & Control Systems Built to match modern beverage production requirements, the Minibloc supports dependable automation with straightforward operator controls. The three-phase 400 V, 50 Hz electrical setup ensures stable performance and compatibility with standard industrial power networks. Safety protections and operator-friendly adjustments help maintain productivity while reducing downtime. Operator controls engineered for practical, daily operation Electrical system: 400 V 3-phase, 50 Hz Safety interlocks and guards for protected operation Mechanical quick adjustments to support format changes Production Line Integration Capabilities This capsuling machine integrates seamlessly after cappers, corkers, wirehooders, or labelers within a bottling line. Its compact frame is well suited to retrofits in existing packaging machinery layouts and to diversified beverage production scenarios. Inline or standalone operation within a used bottling line Compatible with conveyors and standard line controls Format adjustments for varying bottle heights and diameters Ideal for integration in wine and premium beverage packaging Machine Condition & Maintenance History The 2011 Robino & Galandrino Minibloc is presented as a professionally maintained second hand capsuling solution suitable for immediate inclusion in beverage production and industrial packaging processes. It offers a dependable build quality typical of Robino & Galandrino engineering. Condition aligned with ready-for-operation expectations Robust construction supports long service life Operational Performance & Versatility Engineered for consistent capsule application, the Minibloc supports smooth feeding and stable spinning for a clean, uniform finish around the bottle neck. It is commonly configured for PVC shrinkable plastic capsules and polylaminate aluminum capsules used in still wine, fortified wine, and premium beverages. Precise capsule placement and secure finish Configurable for different capsule materials and bottle designs Stable mechanics designed for continuous-duty operation Gedpfxsyh E Hze Afnjbh Installation Requirements & Site Preparation Site preparation is straightforward thanks to its compact footprint and standard utilities. Ensure suitable electrical service and...

Year of construction: 2010, condition: used, machine/vehicle number: INS5, Technical Specifications & Performance Data This Divider Inserter by OMA is engineered for reliable insertion of cardboard partitions into cases at high efficiency. Built in 2010, it offers robust performance for industrial packaging and beverage production, making it a strong addition to any used bottling line or second hand packaging setup seeking improved product protection during transport. Manufacturer: OMA Model: INS ALV Year: 2010 Production speed: approximately 1200 cases/hour Case formats: 6-bottle and 12-bottle cases Head configuration: single-head Included equipment: vibratory belt/conveyor for partition handling Electrical supply: 230 V, 50 Hz Installed power: 1 kW Weight: 1000 kg Marking: CE Advanced Automation & Control Systems The machine is equipped with a dual-sided control interface, featuring a redundant keypad on both sides of the frame to improve operability and access for line personnel. This layout streamlines adjustments, format changes, and maintenance tasks, enabling safer and more efficient operation. The single-head design supports consistent partition placement with reduced complexity and quick routine checks. Production Line Integration Capabilities Designed for seamless integration within industrial packaging lines, this Divider Inserter can operate inline with case erectors, bottle/case packers, and case sealers. It suits both retrofit projects and new installations in beverage production environments. Format compatibility includes 6- and 12-bottle case patterns, with straightforward changeover procedures supported by the dual-sided controls. The unit handles corrugated carton cases and cardboard dividers commonly used to protect bottles during logistics, making it a practical fit for bottling equipment and broader packaging machinery layouts. Machine Condition & Maintenance History Gsdpfx Afeyh E Avjnobh The machine is currently in production and available for testing. Its ongoing operation demonstrates maintained performance and readiness for integration into a working used bottling line or industrial packaging line with minimal commissioning time. Operational Performance & Versatility With a throughput of approximately 1200 cases per hour, the OMA INS ALV supports mid-speed lines requiring dependable partition insertion to minimize bottle-to-bottle contact. The included vibratory belt ensures smooth partition feeding and orientation, enhancing process stability and reducing jams. The single-head configuration prioritizes accuracy and mechanical simplicity, which translates into consistent results and lower routine service requirements. Installation Requirements & Site Preparation The unit operates on a standard 230 V, 50 Hz electrical supply with a modest installed power of 1 kW, supporting energy-efficient operation. Its 1000 kg construction delivers stability during high-duty cycles while remaining compact enough for typical packaging hall layouts. The machine’s footprint is well-suited for integration along existing conveyor systems upstream of case sealing and downstream of case packing. Safety Standard...

Condition: used, Year of construction: 2006, operating hours: 18,625 h, machine/vehicle number: LC598, Technical Specifications & Performance Data This complete Tetra Fino Aseptic line is an integrated aseptic packaging solution engineered by Tetra Pak for liquid food applications. The core filling machine was manufactured in 2006 and is complemented by downstream packaging equipment. Designed for industrial packaging and beverage production, it provides reliable second hand performance with hygienic processing and efficient material handling. Production speed: up to 3,600 packages/hour Container type: Carton-based aseptic packages (Tetra Fino Aseptic family) Supported volumes: 0.2L to 1.0L (examples: 0.2L, 1.0L) Primary product currently run: Milk Main filler year: 2006 Gbodpfeyh E Apox Afnjh Additional module: SOCO System unit, year 2014 Accessories: Trolley for packing with roll holder, ABC valve, 1 m mesh conveyor Advanced Automation & Control Systems The line incorporates an industrial control panel for central operation of filling and downstream handling. The aseptic filler integrates automatic process sequences for sterilization, filling, and sealing under controlled conditions. Operator safety interlocks and machine guarding support safe operation, while standardized HMI navigation streamlines recipe selection and format changes. The architecture is designed for fast restarts and consistent uptime in high-demand environments. Production Line Integration Capabilities This used bottling line is configured for inline operation, linking the aseptic filler with conveyors and a SOCO System packaging module. It supports integration with typical ancillary devices such as product dispensers, cap or straw applicators, and end-of-line packaging machinery. Format changeovers accommodate multiple carton volumes within the 0.2L to 1.0L range, enabling multi-product flexibility for milk and juice production. The conveyor layout ensures smooth product transfers and balanced accumulation between stations. Machine Condition & Maintenance History The equipment is reported in production with overall good condition. Continuous operation on milk indicates stable performance and consistent hygiene compliance. The 2006 filler and 2014 downstream module are maintained to sustain aseptic integrity and packaging quality, making this second hand industrial packaging line a strong candidate for rapid redeployment. Operational Performance & Versatility Optimized for liquid food, the line supports aseptic packaging of products such as milk and juices in pillow-style Tetra Fino Aseptic formats. Key benefits include extended ambient shelf life without preservatives, high barrier multi-layer materials, and hermetic sealing. The layout offers reliable filling accuracy, gentle product handling, and quality consistency suitable for beverage production requiring long shelf life and stable logistics. Installation Requirements & Site Preparation The system is designed for standard industrial facility layouts with room for filler, conveyors, and a compact end-of-line module. Typical utilities include electrical power, compressed air, and process water as required by aseptic operations. A clean, controlled environment is recommended to maintain aseptic performance, with adequate access for o...

Year of construction: 2006, operating hours: 7,000 h, condition: excellent (used), functionality: fully functional, X-axis travel (longitudinal axis) mm 7280 Y-axis travel (transverse axis) mm 525 Z-axis travel (vertical axis) mm 380 A-axis rotation (spindle rotation) mm from 0° to 180° continuous Maximum positioning speed X-axis m/min 80 Maximum positioning speed Y-axis m/min 60 Maximum positioning speed Z-axis m/min 30 Maximum A-axis positioning speed From 0° to 90° in 1" Electrospindle power kW 7 Electrospindle speed rpm variable up to 20,000 Tool holder taper HSK-40E Tool magazine capacity qty. 8 Number of clamps qty. 8 Automatic clamp positioning Gedpsyi Umpsfx Afnjbh Installed power kW 16 Residual-current circuit breaker on main line A 0.3 Weight t 4.8 Operating pressure bar 6 ÷ 8

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: DT1UE18105029734, This Rational Ultra Vent Hood for Rational combi steamers, including connection kit, is suitable for combi steamers CMP, SCC 61/101 electric, from model year 2011 to current (Index H+I). The hood was tested in our in-house workshop and is fully functional. The hood has dents and scratches on one side panel due to improper transport. This does not affect the function of the hood, but for this reason, we are offering it at a special price. The RRP for this Ultra Vent Hood is €3,696 net. Service: We are happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types. Our used equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • Professional overhaul / inspection and expert cleaning • Tested & fully functional—or your money back • Flexible delivery or self-collection options • Expert advice—before and after your purchase • Provision of user manuals, wiring diagrams & spare parts • Inspection in accordance with DGUV V3 This Ultra Vent Hood features patented condensation technology, which binds and channels vapours and steam. Complex exhaust installation measures are a thing of the past. An external connection is not required at all. Installation is simple and even possible retrospectively. Technical Data: • W x D x H: approx. 854 x 1226 x 470 mm • Power supply: V: 230 / Hz: 50-60 • Weight: approx. 55 kg • Serial number: DT1UE18105029734 • Year of manufacture: 2018 Condition: used, fully functional Godpfx Afswd Ixconobh Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement • Subject to change and errors excepted Do you have questions, would you like advice, or wish to view the item on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively in accordance with our general terms and conditions (GTC).