Used Edge Magazine for sale (5,728)

Year of construction: 1995, condition: like new (used), Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 Dcjdokth N Nspfx Ad Nek TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available Dedpsw H Rzxjfx Ad Nock TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, table length: 1,500 mm, table width: 130 mm, overall weight: 450 kg, grinding height: 200 mm, input frequency: 50 Hz, - Used machine - Year of manufacture: 1998 - Condition: well-maintained, CE marking TECHNICAL SPECIFICATIONS: - Dimensions of the sanding belt: 2300 x 200 mm - Dimensions of the grinding surface: 800 x 230 mm - Belt speed: 8 / 12 m/s - Dimensions of the work table: 1500 x 130 mm - Dimensions of the tilting work table: 150 x 130 mm - Tilting angle of the work table: 0 – 45 º - Working height: 870 mm - Diameter of the drive roller: Ø 140 mm - Diameter of the guide roller: Ø 90 mm - Motor power (2 speeds): 3 kW - Motor power for oscillation: 0.22 kW - Diameter of the dust extraction nozzle: Ø 160 mm - Overall dimensions: 1500 x 900 x 1600 mm - Weight: 450 kg Dcodpfx Adjzinlws Nsk

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding height: 150 mm, input frequency: 50 Hz, - Year of manufacture: 2006 - In stock - After technical inspection - CE certified TECHNICAL SPECIFICATIONS: - Working height: 150 mm - Sanding belt dimensions: 150 x 2150 mm - Two sanding belt speeds - Table dimensions: 22 x 144 cm - Both tables adjustable at an angle within the range of 0-30 degrees - Motor power: 3.5 kW / 4.5 HP Dcedpfxjzinpce Ad Nsk - Pneumatic belt tensioning and oscillation - Adjustable platen for sanding veneer on one side and a "back" of 15x75 cm on the other - Attachment, protractor for angle sanding - Additional table for profile sanding - Dust extraction port: diameter 140 mm - Overall dimensions: 144 x 71 x 130 cm (length x width x height) - Weight: approx. 450 kg

Condition: used, TECHNICAL SPECIFICATIONS: – Length of feed rollers: 7800 mm – Roller width: 1430 mm – Roller diameter: 110 mm – Destacking system – Stacker width: 1540 mm – Package depth: 1430 mm – Package height: 1830 mm – Element collection with chains: 1600 mm x 1600 mm – Return of crossbars via belt conveyor: 3000 mm Dodpfx Asymd I Dsd Nock – Crossbar stacking up to 1370 mm at lifting height 1700 mm – Total length: 12 m

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Dedpjy Nznusfx Ad Nsck

Condition: good (used), Year of construction: 1993, machine/vehicle number: RG III 51-2464, Offer 25489 Technical data: - Brush diameter: approx. 250 mm - Brush width: 60 mm - Disc speed: 1500 / 3000 rpm - Drive: 400 V / 2.4 / 3.7 kW - Brush depth adjustment Dsdpfx Aszrv D Tjd Njck - 2 adjustable support blocks - Working height: 900 mm - Space required: approx. W 900 x H 1150 x D 500 mm - Weight: approx. 150 kg

Condition: good (used), Year of construction: 2002, 0,4-3 mm Dcsdpfjzmy N Njx Ad Nok Workingpiece thickness from to 6-45 mm Total length 3700 mm Feed speed 8 m/min. Weight 900 kg

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Dcsdpfx Adsznu Dwj Nek Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

Condition: used, Year of construction: 2025, New demonstration machine! List price €4,938 net. The robust Junior R1 offers all the features you would expect from a modern edge sanding machine. Its massive grey cast iron sanding unit with a powerful motor ensures maximum sanding performance. The work table, height-adjustable by spring pressure, allows for optimal belt use and safe operation. The upper section is made of heavy cast iron with an integrated three-phase motor (380 V, 2.2 kW, 2850 rpm). The machine is equipped with a built-in switch-plug combination, motor protection switch, and main switch compliant with VDE standards. Sanding belt back panel dimensions: 850 x 150 mm. Steel table height-adjustable by spring pressure. Belt size: 150 x 2280 mm. The sanding belt back panel is covered with a protective pad. The machine, when connected to a central extraction system with an air speed of at least 20 m/s, is dust-certified (GS). Includes angle and mitre fence. Technical data: • Motor power: 2.2 kW • Belt size: 150 × 2280 mm • Belt speed: 22 m/sec • Table size: 750 × 350 mm • Required space: 1000 × 800 mm • Weight: approx. 180 kg • Extraction connection Ø: 100 mm. Location: Rieth Dcjdpfx Ajx Hwr Rsd Nok

Year of construction: 1999, condition: ready for operation (used), Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible. Dcjdpezrn Htofx Ad Nsk

Condition: used, Year of construction: 2000, total height: 1,600 mm, total length: 4,300 mm, total width: 840 mm, Colour: Grey Weight: 1.500 kg - Details: - └ Description: The machine needs to be repaired - Year: 2000 - Documentation available: No - CE certificate present: No - Serial number: 404 - Number of units [pcs]: 6 - └ 1st unit type: Glue unit - - Tools available: Yes - └ 2nd unit type: Pressure rollers - └ 3rd unit type: Cap unit - - Tools available: Yes - └ 4th unit type: Corner rounding unit - - Tools available: Yes - └ 5th unit type: Radius scraping unit - - Tools available: Yes - └ 6th unit type: Brushing unit Dcodpfxeykafas Ad Nok - - Tools available: Yes - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 40 - Min. panel width [mm]: 70 - Min. panel length [mm]: 190 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 10 - Glue system: Glue pot - Type of glue: EVA - Voltage [V]: 400 - Current consumption [A]: 15.8 - Fuse [A]: 32 - Power [kW]: 10.2 - Transport dimensions: 4300mm x 840mm x 1600mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Dcedpfx Ajy Dd Igsd Nsk Location: Nattheim

Condition: used, Year of construction: 2010, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, Weight: 1.500 kg Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 161/1-10 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 38.85 - Fuse [A]: 50 - Transport dimensions: 5500mm x 1500mm x 2580mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dodpsyu Tkksfx Ad Nsck Yorick Diebels

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, Colour: Grey - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit Dodpfjx Ei Syjx Ad Njck - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) Dcodpfxoztazfe Ad Njk TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: good (used), Code: 0449 Brand: DE STEFANI Model: MV 1 Automatic single-head edge sander for wooden edges and profiles, solid wood, veneered and various Dsdozmyp Aopfx Ad Neck Sander for profiles and rebates with interchangeable pad, tiltable -15° to +90° 2-speed motor rpm 710/1420 – Hp 1,3 – 2,5 Working height mm 100 Automatic feed with variable speed Adjustable inlet guide Compressed air 6 atm Exhaust outlet diameter 100 mm Overall dimensions mm 2100 x 1600 x 1350 h Weight kg 950

Condition: used, The edge guiding system is rarely used, equipped with sensor and possibly a warranty. Dcodpfxju T Rdie Ad Nek Available quantity: 3 units

Condition: used, We offer for sale: !! ARISE web edge control!! Djdperlmtbefx Ad Neck Dimensions: 3x 25cm and 1x 30cm

Condition: used, Year of construction: 1994, Belt height: 150 mm Belt length: 2280 to 2290 mm Belt speed: 22 m/s Two-sided sanding with oscillation Drive mechanism Veneer sanding mechanism End-face sanding / radius sanding with a small support table Surface sanding with a tilting table Belt direction: right/left Dsdpfxszd Hngs Ad Neck Location: Nattheim

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 23907, total length: 3,750 mm, total width: 1,800 mm, table height: 780 mm, overall weight: 3,000 kg, COMANDULLI edge grinding machine, model PENTA 5+4 SX Belt running direction: LEFT to RIGHT, year of manufacture 2008, #23907 • New conveyor belt, May 2025 • 5 end-face grinding supports, 130 mm, with vertical oscillation • 2 pneumatic lower supports / 2 upper supports • Water groove milling support, manual height and side adjustment • Chamfering support, manual height and side adjustment • Table extension console • Water tray • Space requirement: approx. 375 x 180 cm Price • EXW from machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories in the pictures are not included in the machine/scope of delivery. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold "as is", with no warranty of any kind Inspection possibility • At the operating site near Düsseldorf Availability Dcsdpfozrlkisx Ad Njk • After delivery of the new machine, approximately November/December 2026

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: CE marking, OTT TWISTER Edge Banding Machine This is a single-sided edge banding machine, operated from the right side, designed for applying and processing edges made of veneer, plastic, and solid wood. Year of manufacture: 2014 1. Technical specifications and dimensions: • Banding thickness: 0.4 – 10 mm. • Part width: minimum 70 mm. • Part height: 8 mm to 60 mm. • Part length: minimum 150 mm. • Continuous speed: 18 m/min. • Working height: 880 mm. • Machine dimensions: height 1,600 mm, width 1,100 mm, length 7,200 mm. • Weight: 3,250 kg. • Operating voltage: 400 Volt, 50 Hz. 2. Key working units: • Pre-milling unit: equipped with 2 motors (2.2 kW, 12,000 rpm) for milling the front surface. • Glue application (Vario-Melt): application roller with dosing automation and modular Combi Melt system for EVA and PUR adhesives. • K13 trimming unit: 2 motors (0.2 kW) for precise edge trimming with a tilting option of 0/5°. • Rough and fine milling unit: for processing edge overhang and radius milling. • AKF copying milling cutter: automated unit for longitudinal and corner processing with a function for veneer and postforming. • Scraping units: includes a radius scraper ZKc (for PVC edges) and a surface scraper ZKf (for removing excess glue). Accessories • PUR package: includes a quick-change head and a hopper. OTT TRANSLIFT Transport System This system is used for automatic handling of parts and returning them to the operator. • Manipulator: single-column, with suction, maximum load capacity 60 kg. Dcedpfxjzr Nkgj Ad Nok • Movements: rotation 0°/90° and transfer to the return belt. • Return conveyor belt: width 900 mm, length corresponds to the machine. • Part limits: maximum length 3,000 mm, maximum width 1,300 mm.

Condition: used, functionality: fully functional, De Stefani MVT edge grinder 1 grinding unit Maximum workpiece height: 100mm Grinding unit motor: 2.5 kW Self-sharpening grinding unit Manual adjustment of the grinding unit Manual adjustment of the grinding unit angle Grinding unit with oscillation Dodpfx Aeznu D Rjd Neck Feed speed adjustable via a variator Feed motor power: 0.74 kW

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Dcedpfx Adsw Dm Hro Nek

Condition: excellent (used), Year of construction: 2019, I sell the fully equipped edge banding machine Holz-Her Streamer 1057 XL, year 2019: Configuration: Entry fence manual adjustable Djdpjzr Rwhsfx Ad Njck Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable Clue scrapers pneumatic adjustable Cleaning brushes top + bottom Cleaning fluid spray front + back Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 10m/min. Total length including feeding plate 4200mm Very good condition, fully working! Including full documentation and CE. Available immediately.