Used Edge Polishing Machine for sale (66,553)

Condition: used, LASM belt edge grinder, Double-sided grinder, capable of sanding on a platen or a flat surface, 380V power supply, 3KW motor, 150mm wide abrasive belt, Dcjdpfjzxz Tasx Acpon Oscillation, Angle-adjustable table, Used machine, ready for operation.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm Dcsdpfxezuyhhj Acpjn For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: as good as new (ex-display), Edge banding machine as demo unit 5 units (aggregates): Joint trimming unit incl. AIGNER diamond joint cutter heads, with Konstantin DIA interchangeable knife system and controlled edge air-blast nozzle behind the second joint cutter head. End trimming unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-way usable scraper blades. The unit is retractable. General features: - High-gloss package: tracing rollers for the radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety enclosure for all processing units and the glue pot - Teflon-coated glue pot with energy-saving mode in standby Dsdpew Rcmyjfx Acpjcn - Glue application roller with feed screw for long and tall workpieces - Pressure zone with motor-driven 1st steel pressure roller + 1 rubber roller - Reel shear for edging 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction connections: 3 x 150 mm Connection: 8 kW - 400 V / pneumatic: 6 bar

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Dcodpfjzuyi Eox Acpen Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Condition: Completely Overhauled Features and Technical Specifications: - Equipped with a new glue application system - Manually adjustable feed guide - Joining milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Pneumatic pressure unit 1816 - Trimming unit 1822 - Milling unit 1942 M: radius, chamfer, flush - Blowing nozzle, complete - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Exhaust hood set - Protective hoods, complete - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge banding thickness depending on configuration: 0.4–5 mm - Max. edge banding height: 55 mm - Edge banding strip length: min. 350 mm - Edge banding overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm Dcodozk Nlhjpfx Acpjn - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Exhaust: - Jointing unit: 900 m³/h - Milling unit: 280 m³/h - Rake blade unit: 280 m³/h - Static negative pressure: - Joint milling unit: 1490 Pa - Milling unit: 1650 Pa - Min. air velocity: 20 m/sec - Joint milling unit connection: 70 mm - Scraper unit connection: 70 mm - Compressed air: 6 bar

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 2,200 mm, overall weight: 2,000 kg, input voltage: 380 V, grinding belt width: 80 mm, input frequency: 50 Hz, Direction of machining: from left to right. Two belt sanding units with a traversing sanding pad (option to use profiled pads). Sanding units mounted on a cross column, with adjustable height, left/right positioning, and angle adjustment. Electronic system for adjusting the advance and retraction of the sanding pad, synchronized with the feed rate (changing the feed rate automatically adjusts the advance/retraction times of the pads). Dcodjzz Rh Sopfx Acpon Adjustment of the pad pressure. Adjustment of the sanding belt tension. Oscillation of the sanding belt. Two sanding belt speeds. Max. sanding belt width: 80 mm. Feed rate is continuously adjustable using a variator. Pressure bar with pressure rollers (new pressure rollers). Additional lateral pressure.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 60 h, Equipment: CE marking, A stunning toroidal edge polisher, practically brand new! Tilting calibrator Dsdpfx Acjzxi Huepocn 2 pre-cutting/chamfering stations 6 polishing heads

Condition: new, Year of construction: 2022, Motor 2.2 kW (3 hp), Sanding belt 2280 x 150 mm, Swiveling edge sanding unit, Motorized belt oscillation, Support table at the idler pulley, Pneumatic belt tensioning, Dcsdpfxeffyc Ns Acpen Table size 700 x 350 mm, Working surface 1000 x 150 mm, Belt speed 22 m/s, Roller diameter 140 / 80 mm, Dust extraction port D = 100 mm Ex works, from stock in Seevetal, subject to prior sale.

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. - 1.1kw engine. - We will help you organize a profitable shipping company or courier. Dcsdpfx Ajv T Ttfscpjn

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec Dsdpod R Ev Djfx Acpscn • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Year of construction: 2016, condition: ready for operation (used), Max. glass dimensions: 2000x3000mm, number of spindles: 8, glass thickness: 3-28mm, length: 6500mm, width: 1600mm, height: 2600mm, weight: 3.2t. Dodpjin U I Uefx Acpocn

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Dcedjunrwnopfx Acpen Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: used, Year of construction: 2015, functionality: fully functional, workpiece height (max.): 60 mm, total length: 7,920 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Dcodpfx Aex Emf Docpjn Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special features for materials with protective foil, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunction units for quick setup of radius, flush, bevel Vertical & horizontal spray units and much more. Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), The BIBO TC84, a professional Italian edge coating machine, is designed for coating both sides of leather and finishing edges. This machine is used in the production of belts, straps, bags, wallets, and other leather goods that require aesthetically pleasing edge finishing. The device allows for the even application of coating to the edges of the material, significantly speeding up the production process and ensuring high consistency in the finished product. Technical data: Manufacturer: BIBO Model: TC84 Country of origin: Italy Power supply: 380 V 50 Hz Two-sided edge coating Adjustable operating parameters Adjustable material guide Stable steel construction Cabinet/base included Dedszgvfyjpfx Acpecn Applications: leather belts straps handbags wallets leather goods leather products Condition: Used machine. Visual condition as shown in the photos.

Condition: used, Year of construction: 2003, Used Machine Year of Manufacture: 2003 Features and Technical Specifications: - MAGELIS control system Dcjdpjzk Nt Esfx Acpsn - For EVA-based hot-melt adhesive - Joining: 2x1.5 kW, u=12,000, 200 Hz - Trimming: 2x0.2 kW, automatic swivel 0°/3°, 2 carbide-tipped saw blades 140 mm - Flush milling: 2.07 kW, with WPL HF 70 heads, diameter 70 mm - Radius milling: R2 - Radius scraper - Surface scraper - Top glue tank - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8–42 mm - Minimum length: 150 mm - Edge thickness: 0.2–6 mm - Feed rate: 12 m/min - Dust extraction connection: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Dsdpfsxggzlex Acpocn Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: new, Year of construction: 2026, EBM360B Edgebander – Professional Straight and Curved Edge Banding Machine The EBM360B is a professional benchtop edge banding machine designed for precise edging of both straight and curved workpieces. Thanks to its robust construction, reliable operating systems, and automation of key processes, the machine is ideal for medium-sized and large woodworking and furniture manufacturing facilities that require repeatability, efficiency, and high-quality results. Key Advantages Versatile application – suitable for straight and curved workpieces, with edge band widths of 10–60 (68) mm and thicknesses of 0.3–3 mm. Process automation – pneumatic shears for precise edge band cutting, with automatic feeding and material pickup from the magazine. Stable and durable construction – a heavy-duty machine bed and reliable mechanics ensure long-term, trouble-free operation. Efficient bonding – a 2 kW heated glue pot ensures uniform and strong adhesion of the edge band. Ergonomic operation – the control panel is positioned within easy reach of the operator, with intuitive adjustment of operating parameters. High productivity – continuously adjustable feed speed from 0–14 m/min allows the machine to be adapted to different production requirements. Construction and Technology The EBM360B has been designed for demanding industrial working conditions. Machine body – a stable welded construction that minimizes vibration and improves operating accuracy. Heating system – a 2 kW heater provides rapid glue heating and uniform glue application. Drive motors – a set of motors (0.18 kW, 0.37 kW, 0.4 kW) providing independent drives and increasing component durability. Pneumatic shears – ensure clean and precise cutting of the edge band. Pneumatic system – a working pressure of 6 bar ensures stable operation of the feeding and cutting systems. Precision and Productivity With the ability to work with a minimum radius of 20 mm, the EBM360B enables precise edge banding of workpieces with complex geometries. The continuously adjustable feed speed of up to 14 m/min allows productivity to be adapted to the production scale while maintaining high bonding quality. Applications The machine is designed for professional woodworking and furniture manufacturing facilities where the following are essential: edge banding of straight and curved workpieces, repeatability and precision when processing large quantities of components, high productivity in both batch and one-off production, durable and aesthetically pleasing edge finishing. Standard Equipment 2 kW glue heater, pneumatic edge band cutting shears, automatic edge band feeder, control panel with adjustable operating parameters, stable steel machine bed. Technical Specifications Edge band width 10–50 (58) mm Edge band thickness 0.3–3 mm Minimum working radius 20 mm Maximum cutting width 50 mm Heating power 2 kW Power supply 400 V Motors 0.18 kW / 0.37 kW / 0.4 kW Feed speed 0–14 m/min Air pressure 6 bar Dimensions (L × W × H) 1550 × 800 × 1000 mm Weight 185 kg Dcjdpfswl Eaaex Acpsn

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC Dcjdpfxszw Et Io Acpen year of construction 1998 . Model : CB 18 . Series : B20 .

Condition: good (used), Year of construction: 2002, Edge banding machine with joiner milling cutter. Dcodpsgmn H Aofx Acpjn Otherwise, fully equipped. PU adhesive can be used.

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Features and Technical Specifications: - For pre-coated edge banding material - Edge banding material up to 1.3 mm - With roll trimming - With flush trimming using a blade - With top and bottom flush milling/bevel milling using HF motors Location: Röllbach Availability: Available shortly Dedpfx Acjzk Ntlepscn

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, Dcedszuykvspfx Acpjn by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Dcedpfx Acew Tfw Hepjn Availability: short notice Storage location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2022, Belt width: 150mm Belt length: 2170mm Dcjdpfx Acehpmahepjn Table size: 1440mm x 710mm Veneer sanding attachment: yes Oscillation: yes Table tiltable: yes, 0° to 45° Dust extraction port: 120mm Motor power: 3 kW Machine length: 1440mm Machine width: 800mm Weight: 530kg

Condition: used, Technical details: plate thickness: 10 mm Dsdpju Ngfqofx Acpjcn material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: good (used), Year of construction: 2003, System with water basin and pumps, Total depth with water basin 1400 mm Total length: 8100 mm, Height: 2500 mm, Dcjdpfx Ast Ah Acecpsn Working direction: right to left