Used Egv 12 for sale (20,671)

Condition: used, functionality: unexamined, machine/vehicle number: M11359*17765, Year of construction: 2018, Swedish Manufacture Load Capacity & Mast • Load capacity: 12,000 kg at 1,200 mm load center • Mast: Duplex standard o Lift height: 6,500 mm o Collapsed height: 4,895 mm o Extended height: 8,100 mm o Free lift: 0 mm • Tilt: 5° forward / 10° backward _____ Dimensions • Length: 5,205 mm • Width: 2,550 mm • Height: 2,905 mm • Wheelbase: 3,500 mm _____ Attachment: STEINWEG Stone Stacking Grab Type HG1T-6000S • Gripping range: 0.96–1.00 m • Opening range: approx. 0.6–1.3 m • Gripping height: 1.3 m (special height) • Grab capacity: 6,000 kg • Double gripping rails: 1 pair, shock-absorbed plastic jaws, length: 2.3 m • Pendulum-mounted • Forklift carriage arm: Double-beam design, with endless rotator and pendulum suspension, capacity: 8,000 kg at outreach 1.6–2.1 m • Hydraulic outreach: 1.6–2.1 m • Stabilizers: 2 units for compensating pendulum movements • Integrated sideshift: travel 250 mm • Lock valves: Electromagnetic, 24 V DC _____ Wireless Pressure Monitoring • Transducer: Wireless transmission, frequency 868.4 MHz • Temperature range: -30°C to +85°C • Battery: 3.6 V lithium, approx. 1 year lifespan (with 5-second interval) • Receiver: Digital display, signal lamp, control box mounting _____ Powertrain & Chassis Component Description Engine Volvo TAD-871-VE, 6-cylinder, 185 kW at 2,200 rpm, 7.7 L displacement, 1,160 Nm, EU Stage IV Transmission ZF 4WG-191 automatic, 3+3 gears Drive axle Kessler D81 Steer axle Hydrostatic, double-acting steering cylinder Tyres Drive axle: 4 × 12.00 × 20" Solid Hauler Steer axle: 2 × 12.00 × 20" Solid Hauler Braking system Oil-immersed wet disc brakes, hydraulic parking brake (spring applied, electronically controlled) Hydraulics Parker load sensing system, variable pump capacity, 4 servo-assisted control levers Electrics 2 LED front headlights, 2 LED work lights on mast, 4 indicators, LED rear lights, CanBus control for engine, transmission and cabin _____ Cab & Equipment • Driver's seat: BeGe 9100, air-suspended, 2-point seatbelt • Cabin: OPTIMA, ergonomic, high noise and vibration insulation, hydraulically tiltable to the side, 2 doors, tinted windows, sliding windows on both sides • Windscreen wipers: front, roof, rear window incl. washer system • Steering wheel console: Adjustable • Heater & defroster • Interior cabin lighting • Rearview mirror, parking brake warning buzzer _____ Additional Equipment • Mud flaps front & rear • Exterior rearview mirrors on fender (high) • Turbo II Heavy Duty air filter • Additional hydraulic function • Quick couplings on fork carriage • Hydraulic accumulator/vibration damper 60 bar/2 L • Hydraulic oil tank pre-heating • Additional LED work lights (2x on mast) • Reversing alarm, LED beacon • Electric cables above mast Dujdpfsyyvvhsx Affor • Power connection 400 V, 3-phase • Blue Spot front and rear • EMC 107 electronic weight display (0.1 t) • EMC 114 electronic joystick with RPM boost • EMC 122 speed limiter 20 km/h, switchable to 15 km/h • Electric seat heating • DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers • Intermittent wiper • ACC air conditioning • SMV universal mounting rail • Movable A4 writing pad • Diesel parking heater + engine water heater

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled Dedpfxeyyqm Is Affeur - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- 1. tenoning Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor powe...

Condition: good (used), Year of construction: 2019, operating hours: 786 h, load capacity: 1,200 kg, lifting height: 2,424 mm, fuel type: electric, mast type: duplex, construction height: 1,765 mm, empty load weight: 1,000 kg, mileage: 786 km, Electric duplex stacker Brand: Still (Germany) Year of manufacture: 2019 Only 786 operating hours Capacity: 1,200 kg Lifting height: 2,424 mm Overall height: 1,765 mm Equipped with initial lift Battery: 2019 with charger Automatic filling system Video to follow Dsdpfx Aoyxhqheffour

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Duodpekvnumofx Affor Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2010, condition: excellent (used), Chamber inside 2000 x 1250 x 1250 mm Volume inside 2344 Liter Up to 400 Gr/C (Power 33kW)   Preheating / Drying For manual, cycle and CNC processing up to interactive contour programmingCovered guidance tracks (DGP) for high long-term precisionDirect drive from motor to main spindle for high running smoothnessOil recirculating lubrication unit with filtering for the lubrication of the precision main spindle bearingCombination control unit for economically advantageous programming and machine operation, as well as optimum access to the work area Length:2500mm Width:2015mm Duodpfeuqkwfox Affsr Height:2900mm Weight:4000kg

Condition: used, operating hours: 58,685 h, machine/vehicle number: IntNr231539, CNC Swiss Type Automatic Lathe STAR SR-20RII with FMB Turbo 3-26 Year of manufacture: 12/2006 Control: Fanuc 18i-TB Technical Data Max. turning diameter: Ø 20 mm (optionally up to Ø 22 mm) Turning length: 205 mm Main spindle: • Speed: up to approx. 10,000–12,000 rpm • Power: approx. 3.7–5.5 kW • C-axis for contour machining Sub spindle: • Speed: up to approx. 6,000–8,000 rpm • C-axis Axes (travel distances): • X1 / Z1 / Y1 (main machining): X1 approx. 265 mm / Z1 approx. 205 mm / Y1 ± 20 mm • X2 / Z2 (sub spindle): similar to main axis, exact values depend on the machine • Rapid traverse: approx. 24–30 m/min Duodpfx Aoyycpueffer Machine dimensions: 2,400 × 1,205 × 1,700 mm Machine weight: approx. 2,200 kg Bar feeder: FMB TURBO 3-26/3200 Chip conveyor Inspection: The machine can be inspected on site by prior appointment. Note: Technical data subject to change and errors. Intermediate sale reserved!

Condition: good (used), functionality: fully functional, Year of construction: 1995, Used Boschert notching machine Type: LB 12 K 4 Dodpfeywvwyox Affeur Capacity: 120 x 120 x 4 mm Fixed angle: 90 degrees Year of manufacture: 1995

Year of construction: 2007, condition: used, Galvanized loading bridge with extra support legs Dusdpfx Aeyz A Tcoffer

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation Dujdjh R Taqepfx Affer - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. Dsdpfjmhhy Njx Affjur The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: used, functionality: fully functional, machine/vehicle number: BED7307, Year of construction: 2015, operating hours: 1,798 h, load capacity: 4,000 kg, lifting height: 6,580 mm, free lift: 2,200 mm, fuel type: electric, mast type: triplex, construction height: 3,040 mm, fork carriage width: 1,450 mm, fork length: 1,200 mm, empty load weight: 8,400 kg, total length: 4,400 mm, drive type: Elektro, construction width: 2,000 mm, Electric sideloader Chassis number: BED7307 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Refurbished, without warranty Technical condition: very good Front tires type: Superelastic Front tires size: 355/45-15 Front tires condition: New Duodsyw U A Iepfx Affjr Rear tires type: Superelastic Rear tires size: 355/45-15 Rear tires condition: New Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year: 2015 Battery condition: 60 - 80% Description: The unit is offered in very good condition with a new UVV safety inspection. It has been cosmetically reconditioned by our workshop and any defects have been remedied. Fork positioner, 3rd valve,

Condition: used, Year of construction: 1997, material width 300 mm coil weight 2 x 1,25 t material thickness 0,4 - 1,2 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm no. of straightening rolls 9 straightening roll diameter 30 mm number of draw-in rolls 2 roll diameter 30 mm speed 3 - 30 m/min feed length 0 - 9999,9 mm power requirement 3,0 + 2,5 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm weight of straightening machine 0,45 t dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm weight of the feeder 0,4 t dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm Universal straightening machine SC 12-FQ with infinitely variable drive double decoiler 2352 B-FPS WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls Duedpfoyx Iknox Affer

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Duedevut Tbspfx Affer Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram depth of the foundation pit approx. 4,1 m as is where is, WITHOUT putting into operation

Condition: good (used), machine/vehicle number: 3518, Year of construction: 2024, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,420 mm, total width: 2,540 mm, operation weight: 17,820 kg, additional equipment features: Rear mud guards, Weight indicator, Centralized greasing system, Front mud guards, Equipment: lighting, Kalmar ECG160-12 from Uniktruck Duodpfxsyz Dkce Affjr

Condition: good (used), machine/vehicle number: 3611, Year of construction: 2016, load capacity: 22,000 kg, lifting height: 4,500 mm, mast type: duplex, total length: 6,090 mm, total width: 3,050 mm, operation weight: 36,800 kg, additional equipment features: Centralized greasing system, Dual tread, Equipment: lighting, Kalmar DCG220-12 from Uniktruck Dusdpfxoyzt A Ie Affjr

Condition: good (used), axle configuration: 1 axle, first registration: 12/2012, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Maintenance, history and condition Number of owners: 1 Technical condition: average Visual appearance: good Product safety Djdpfoyzmd Sex Affeur Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), Year of construction: 2016, lifting height: 9,950 mm, fuel type: electric, Lifting capacity: 300 kg Working height: 1.195 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Transport dimensions (LxWxH): 2,45x1,21 Production country: FR Please contact Christian Theißen for more information Manufacturer: Haulotte Model: Compact 12 Year of build: 2016 Condition: Used Dsdpfx Asywuv Usffjur Data: Max. working height: 11,95 m Movable up to working height: 11,95 m Platform height: 9,95 m Lifting capacity: 300 kg Lifting capacity on extension: 120 kg Platform dimensions LxW: 2,28 x 1,17 m Platform length pushed out: 3,21 m Total dimensions LxW: 2,45 x 1,21 m Height transport position with railing: 2,38 m Height transport position without railing: 1,12 m Ground clearance: 0,07 m Drive type: Battery indoor use only: no Empty weight: 2.470 / 2.630 kg Special features: white tires, anchor points for fall protection systems (PPE) EN795 available.

Condition: ready for operation (used), * Brand: Haver & Böcker * Type: Heavy duty * Dim. screen: 4500 x 1200 mm – 2 decks. Dujdoywm Hxspfx Affer * Driving: E-Motor 21kW.

Condition: ready for operation (used), * Brand: Svedala * Type: VLB 312 Dsdpfsywmwksx Affeur * Surface: length 3500 mm, width 1200 mm - 3 decks * Driving: 2 pieces vibration motors of each 3 kW

Condition: ready for operation (used), * Brand: Svedala Dodoywmlbepfx Affeur * Type: VFOM 20/12 * Surface: length 2000 mm, width 1200 mm - 3 decks * Upper deck: screen opening [] 100 mm * Middle deck: screen opening [] 80x50 mm * Lower deck: screen opening [] 25 mm * Driving: 2 pieces vibration motors of each 3 kW

Condition: ready for operation (used), * Brand: Svedala * Surface: 4000 x 1200 mm - 1 decks Dusdpoywmgxofx Affsr * Screen opening: 3 mm * Driving: E-motor 5,5 kW * Incl.: springs and steel support.

Condition: ready for operation (used), * Brand: Allis Chalmers Dedpfx Afoywl S Hsfeur * Surface: 4000 x 1200 mm - 2 decks

Condition: ready for operation (used), * Brand: Siebtechnik Dsdpfeywl Rpjx Affsur * Type: HG * Surface: 3000 x 1200 mm - 2 decks * Incl.: 11 kW Motor.

Condition: ready for operation (used), * Brand: Gfa Metso Dusdeywl N Sjpfx Affor * Type: Grizzly * Surface: 4000 x 1200 mm - 1 deck * Screen opening: 70 mm. * Driving: 18,5 kW * Incl.: springs.

Condition: new, Year of construction: 2025, – Horizontal capacity 1200 kg – Vertical load capacity 600 kg – Table size 1000 mm Duedpfx Afsk Dua Asfsr – Electrically tiltable – Wireless remote control – Digital display – Documentation – 400 V