Used Minarcmig Evo 170 for sale (3,285)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 720 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller manufacturer: Heidenhain, controller model: TNC 7, workpiece weight (max.): 300 kg, rotational speed (max.): 100 rpm, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 60, mount diameter: 80 mm, tool length: 300 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Top 5-axis machine with torque drives in B and C axes, optionally with BLUM laser, tool measurement, internal coolant up to 60 bar, belt filter, further options on request, automation is also possible. Kedpfx Aoyucq Hsb Tedi

Condition: excellent (used), Catalogue number 7316 TECHNICAL DATA - Track width: 350mm Kodpfx Aboymnqvo Tsdi - Working width of shaft with saws: 355mm - Max. blade diameter: 450mm - Max. cutting height: 170mm - Blade bore diameter: 70mm - Table dimensions: 1850x790mm Top section: - Pawls - 2 smooth, metal sliding shafts - Shaft with saws - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls - Track - Toothed, metal feed shaft - Central lubrication, electric - Stepless feed speed adjustment - Electric lifting of body up/down approx. 1kW - Feed motor: 2.2kW - Main motor: 75kW - Overall dimensions (L/W/H): 2600x1800x1700mm - Weight: 2700kg – Used multi-blade saw – Very good condition Net price: 68,900 PLN Net price: 16,400 EUR depending on 4.2 EUR exchange rate (Prices may vary with larger fluctuations)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,750 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, nominal power (apparent): 35 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table width: 1,600 mm, table length: 2,100 mm, table load: 6,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10 h, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Exhibition machine, immediately available, inspection possible near Hanover Kdodpfeylirljx Ab Toi

Condition: good (used), Technical data for pallet racking beam: Racking system: Bito Type: PRO Scope of delivery includes: 01x pallet racking beam, used Material colour: blue Beam type: PT170S Box profile: 170 x 50 mm Connector: 5 hooks (HK) Clear span: 3,600 mm Max. load per pair of beams: 4,000 kg, with evenly distributed load 02x safety pins, used Version: fully galvanized For securing the beams Against unintended lifting Ksdpfx Abox Hwl Rj Todi Note: The functionality of the beams is guaranteed despite the holes! The beams originate from a BITO project with heat shields that, according to the manufacturer, were bolted on! Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only offered for collection. Any transport or shipping beyond this can be arranged at additional costs, which can be quoted individually depending on place of delivery and scope of order.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 40 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table load: 1,500 kg, rotary table diameter: 700 mm, rotational speed (max.): 800 rpm, overall weight: 12,000 kg, spindle speed (max.): 17,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MILLING/TURNING CENTER, HSK 63T, Heidenhain, 90 tools Swivel Milling Head: - With torque motor and hydraulic clamping - Swivel range +30/-120°, infinitely variable - 17,000 rpm - 154 Nm torque - Drive power 29 kW - Separate spindle cooling for consistent temperature - Tool holder HSK-T63 with air blast function Integrated Rotary Table: Ksdpjylnq Tofx Ab Tjdi - With torque motor and hydraulic clamping - Speed 800 rpm - Diameter 700 mm - Extended clamping surface 1,600 x 700 mm General Features: - Heidenhain glass scales on all 5 axes - 90-position tool changer with double-arm gripper - Coolant and compressed air pistol - Chip conveyor - Coolant system - Electronic handwheel - Work area lighting - Ergonomic control console

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 548 mm, turning diameter: 460 mm, spindle bore: 88 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 310 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 620 mm, spindle motor power: 24 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 30 rpm, rotational speed (max.): 4,500 rpm, overall weight: 7,600 kg, swing diameter over bed slide: 600 mm, bar passage: 75 mm, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, Top new machine, "THE TANK" with Siemens 828 Shopturn, BMT65 (MORI), Renishaw probe arm, and sub spindle. Available with automation at extra cost (see pictures). - Siemens 15.6'' touch display - Main spindle 3,500 rpm - Siemens motor - Box guideways with Turcite coating - 12-station BMT turret for 12 driven tools - 3-jaw chuck Ø 250 mm on main spindle - 3-jaw chuck Ø 150 mm on sub spindle - C-axis Kjdpfx Ajylnb Seb Todi - Y-axis - Sub spindle - Chip conveyor - Coolant system and high-pressure (IKZ), 20 bar - Work area lighting - Foot pedal for chuck - Multi-colour machine status indicator Pictured AGWs are not included in the offer.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 770 mm, turning length: 740 mm, turning diameter: 570 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 320 mm, travel distance Z-axis: 820 mm, spindle motor power: 36,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, overall weight: 8,800 kg, swing diameter over bed slide: 770 mm, bar passage: 91 mm, chuck outer diameter: 305 mm, Equipment: rotational speed infinitely variable, Top new machine, "DER PANZER" with Siemens 828 Shopturn, Renishaw measuring arm, tailstock Kedpfxoylm Rrs Ab Tjdi

Condition: used, Luenette Height without foot 290 mm Foot width 50 mm Distance 170 mm Kodpfecrcxtex Ab Tsdi

Condition: used, functionality: unexamined, machine/vehicle number: EVO-lizer A4, Year of construction: 2015, operating hours: 4,413 h, total length: 720 mm, total height: 720 mm, total width: 540 mm, type of input current: AC, overall weight: 64 kg, input voltage: 230 V, input current: 4 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.05 mm, table width: 270 mm, tank capacity: 11 l, table length: 195 mm, noise level: 46 dB, number of print heads: 2, Used FDM 3D Printer EVO-lizer A4 Device Data: Printer dimensions (W x D x H): 540 x 720 x 710 mm Weight: 64 kg Connection data: 230 VAC; 50/60 Hz; 4A Ambient temperature: 15 – 35 °C Ambient humidity: 30 - 70 % Acoustic Data: Kdodpfjxu I R Dex Ab Tsi Idle mode: 40 dBA Operating mode (1 m distance): 46 dBA Operating mode (40 cm distance, door open): 62 dBA Technical Data Sheet: Print bed size (W x D x H): 270 x 195 x 205 mm Minimum layer thickness: 0.10 mm Positioning accuracy: 0.05 mm Nozzle temperature range: 160 – 260 °C Print bed temperature range: 30 – 100 °C Filament material: ABS, PLA Filament diameter: 1.75 mm Software/slicing program: EVO-lizer

Condition: good (used), Year of construction: 2016, Vertical Machining Center Machine type: MTCut MVY150H Control: Heidenhain iTNC 530 SmarT.NC Year of manufacture: 2016 Spindle operating hours: 7,140 h Power-on hours: 21,774 h New spindle TECHNICAL DATA: Travel distances: X-axis: 1,500 mm Y-axis: 700 mm Z-axis: 810 mm Rapid traverse (X/Y/Z): 68 m/min. Max. spindle speed: 18,000 rpm Torque: 162 Nm Drive power: 34 kW Tool holder: HSK 63 Tool stations: 40 Table size: 1,500 x 800 mm Ksdpfx Asx Uqrgob Tjdi Features: Chip conveyor Through-spindle air Electronic handwheel Chip flushing gun Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe: TS460

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Kedpfox N A Dqox Ab Tsdi

Condition: like new (used), Year of construction: 2022, operating hours: 1,260 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: Siemens, controller model: 828D ShopMill, table width: 610 mm, table length: 1,400 mm, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Inspection possible near Bonn Kdodpfxexwufaj Ab Tji - 12,000 rpm - Separate spindle cooling for constant temperature - Tool holder DIN ISO SK40 with blow-out function - 30-position tool changer with double-arm gripper – tool change time 1.8 sec - Thread cutting without compensation chuck - Roller guides - Coolant and compressed air gun - Screw chip conveyor - Coolant unit - Compressed air cooling for dry machining - Electronic handwheel - Work area lamp

Year of construction: 2021, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 210000002, Industrial vacuum cleaner with integrated liquid bath separator Dust class H/Type 22 400 volts, 2,200 watts 60 l dirt container Air volume max: 330 m³/h Kdjdevt Aghjpfx Ab Toi Vacuum pressure max: 240/300 mbar Filter levels: 1st filter level: liquid bath separator 2nd filter level: demister 3rd filter level: VA filter 1m² 4th filter level: H14 filter cartridge 2mEX-protected for use in zone 22 according to EN 60335-2-69 including appendix AA and EN 62487 as well as ATEX 2014/34/EU incl. 3.5 m ESD-PUR suction hose Ø40mm electr. conductive with VA-Kamlock coupling, crack nozzle Serial number 21000002 LxWxH: 83X68X165cm 1.00 piece 072-0401-ESD ESD extraction arm Ø50mm x length 1,500mm, table mounting 030902 certified according to IEC 61340-5-1, 3 joints 1.00 piece ESD flat hood Ø50mm, 300x200mm including hood pipe connector, certified according to IEC 61340-5-1 SET: console for extraction arm Ø50mm Material: ST/K

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, nominal power (apparent): 35 kVA, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 2,000 kg, rotary table diameter: 800 mm, overall weight: 18,600 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 34,000 W, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, As-new demonstration machine, laser, probe, configurable through coolant (IKZ) Kjdpfsxbzyrox Ab Todi

Condition: used, Year of construction: 2013, operating hours: 15,000 h, functionality: fully functional, turning length: 700 mm, turning diameter: 400 mm, spindle bore: 88 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 24,000 W, overall weight: 5,800 kg, bar passage: 75 mm, chuck outer diameter: 250 mm, mount diameter: 40 mm, Equipment: rotational speed infinitely variable, Tool holder VDI40, machine is used, geometry and accuracy checked by MT EVO Kdedpfxoxdbvxs Ab Tei

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386V11914, Year of construction: 2019, operating hours: 5,993 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lift height: 4,625 mm Overall height: 2,121 mm Free lift: 1,519 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Kdsdpfx Aeytn T Rjb Tji Version: 3-wheel electric Battery: 48 V, 625 Ah, tested very good performance at 50.1 V Operating hours: 5,993 h EQUIPMENT Former Linde full-service unit UVV inspection valid until 02/2027 Next service due 02/2027 or in 1,000 operating hours All dimensions are rounded figures. No liability for typographical or measurement errors. COLLECTION TERMS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email proof of payment! Collection WITHOUT further registration possible Monday to Friday 7:00 am to 4:30 pm. A mast that is too high can be dismantled for transport upon request. In case of delayed collection, a storage fee of €20 per machine per day will be charged (payment must be settled prior to pickup).

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2Y394L01382, Year of construction: 2022, operating hours: 4,782 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: gas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Kdodpfjytn I Isx Ab Tsi Load capacity: 5,000 kg Lift height: 3,700 mm Overall height: 2,900 mm Free lift: 150 mm MACHINE DETAILS Mast type: Standard Drive type: LPG Battery: 12 V starter battery Operating hours: 4,782 h EQUIPMENT Former Linde full-service unit Safety inspection (UVV) until 02/2027 Next service due in 518 operating hours Note: Mast removal costs €750 net. All dimensions are approximate. No liability is assumed for any writing or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT prior appointment from Monday to Friday, 7:00 am to 4:30 pm. If the mast is too high for transport, it can be dismantled on request. If the machine is not collected within the agreed deadline, a storage fee of €20 per machine per day applies (additional charges must be paid before collection).

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386J08866, Year of construction: 2018, operating hours: 4,387 h, load capacity: 1,500 kg, lifting height: 3,140 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 01/2027, Equipment: UVV, Service + UVV 01/2027 1,500kg Duplex 314cm Electric Forklift, 4,387 hours No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,500 kg Lifting height: 3,140 mm Free lift: 1,519 mm Fork length: 1,200 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 4,387 h Mast type: Duplex Kedpfx Ajyuurcob Tjdi Drive: Electric Battery: 13/08/2018 24V 8PzS 1000Ah, measured at 24.6V (very good performance!) Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,100 x 2,121 mm Weight: 3,100 kg EQUIPMENT Ex-Linde full-service machine Facelift model with tilt angle display 3rd valve, side shifter Front LED work light Rear LED work light Rear safety light Comfort seat All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Loading from the side possible up to 5 t with large onsite forklift at buyer’s own risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday, 7:00–16:30. A mast that is too high for transport can be dismantled on request. If not collected within the agreed time, a storage fee of €20 per machine per day will apply (payable prior to collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,265 h, load capacity: 1,600 kg, lifting height: 4,100 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,100 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV 02/2027 1,600 kg Triplex 410 cm 3rd + 4th Valve Electric Forklift 3,265 Operating Hours No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Free lift: 1,500 mm Lift height: 4,100 mm Mast type: Triplex Design: Counterbalance forklift MACHINE DETAILS Operating hours: 3,265 h Mast type: Triplex Drive type: Electric Battery: 48 V, 625 Ah Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 2,100 mm Weight: 3,400 kg FEATURES Former Linde full-service machine Facelift model with tilt angle display Triplex mast with full free lift 3rd valve for side shifter 4th auxiliary valve open for fork positioner White non-marking tires Front LED work lights Rear safety light Comfort seat All dimensions are rounded values. No liability accepted for typing or measurement errors. Kdedpfx Aeyufrmjb Toi COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Pickup ONLY with email confirmation of payment! Pickup WITHOUT prior notice: Monday to Friday 7:00 am – 4:30 pm. If the mast is too high, it can be disassembled for transport upon request. If pickup is not made within the agreed timeframe, a storage fee of €20 per machine per day will be charged (the outstanding amount must be paid before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 13,213 h, load capacity: 1,400 kg, lifting height: 3,145 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV 02/2027 1,400kg Duplex Free Lift Electric Forklift No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 3,145 mm Free lift: 1,519 mm Fork length: 1,200 mm Design: Counterbalance forklift MACHINE DETAILS Kdedoyufbhspfx Ab Tei Operating hours: 13,213 h Mast type: Duplex Drive type: Electric Battery: 48 V 500 Ah, measured at 49.5V (very good performance!) Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,100 x 2,121 mm Weight: 3,100 kg EQUIPMENT Former Linde full-service unit Duplex mast with full free lift 3rd valve with sideshift Load guard (can be easily removed) All dimensions are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on-site, at buyer’s own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT appointment Monday to Friday 7:00 am–4:30 pm. High masts can be dismantled for transport on request. If not collected within the agreed timeframe, a storage fee of €20 per machine per day applies (payment due before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,446 h, load capacity: 2,000 kg, lifting height: 3,140 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 03/2027, Equipment: UVV, Service + UVV until 03/2027, Battery 19/2022 No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,140 mm Fork length: 1,800 mm Free lift: 1,519 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 3,446 h Drive type: Electric Battery: 19/2022 48V 750A, 49.6V (very good performance!) Mast type: Duplex Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,121 mm Weight: 3,500 kg EQUIPMENT Former Linde full-service unit Valve side shifter Duplex mast with full free lift All measurements are approximate. No liability for typing or measurement errors. COLLECTION TERMS Side loading up to 5 t possible onsite with a large forklift at buyer's own risk. Collection ONLY with email payment confirmation! Kjdpfjyud Slsx Ab Tedi Collection WITHOUT prior appointment, Monday to Friday 7:00–16:30. A mast that is too high for transport can be dismantled upon request. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged (outstanding payment must be settled before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 16,254 h, load capacity: 5,000 kg, lifting height: 5,400 mm, free lift: 150 mm, construction height: 3,720 mm, DGUV certified until: 02/2027, fork length: 2,400 mm, Equipment: UVV, 5,000 kg Service + Safety Inspection (UVV) 02/2027 3rd & 4th Valve Fork Positioner AC Air Conditioning Diesel Forklift Truck No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 5,400 mm Fork length: 2,400 mm Free lift: 150 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 16,245 h Kodpfxjyudkbs Ab Todi Mast type: Clear-view Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,800 x 1,450 x 3,720 mm Weight: 7,700 kg FEATURES Ex-Linde service machine Current service performed, next due in 755 hours Full cab with air conditioning, heating, and windscreen wiper Clear-view mast without central hydraulic cylinder 3rd & 4th valve for fork positioner with sideshift Note: Dismantling of the mast can optionally be offered by the seller for €950 net. All measurements are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large onsite forklift at your own risk. Collection ONLY with emailed payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. A mast that is too high can be dismantled for transport upon request. If collection is not made within the agreed period, a storage fee of €20 per machine per day will apply (payment of arrears required before collection).

Condition: used, Year of construction: 2006, travel -x axis 500 mm travel -y axis 450 mm travel -z axis 400 mm c-axis 360 b-axis 0 - 108 ° surface area d: 500 x 380 mm control HEIDENHAIN - iTNC530 number of spindle speeds 20 - 18.000 U/min numbers of positions in the tool changer 60 tool taper HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system Kdjdpfxjyvkuqo Ab Toi The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo

Condition: used, mileage: 150,000 km, power: 125 kW (169.95 HP), first registration: 08/2016, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 8,600 mm, total width: 2,550 mm, total height: 3,450 mm, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, tail-lift, Now chat via WhatsApp: Quick & easy contact with our sales consultant. Attention!!! Sale preferably to commercial buyers. Internal ID number: [3228] ----Optional services: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing available, with or without down payment * Towbar retrofitting available on request ----Vehicle highlights: * 19% VAT deductible * Regularly maintained * German vehicle * One owner * Immediately ready for use * Euro 6 emissions standard * Permissible total weight = 7,200 kg / Payload = 4,070 kg * Box body dimensions = 6,200 mm / 2,500 mm / 2,400 mm * Air suspension * Automatic climate control * Cruise control * Tail lift Special equipment: Storage package, 210A generator, automatic climate control, 117L fuel tank, 170cc cooling compressor, rear crossmember at frame end, cab seats: comfort (hydraulic) driver seat Kdjdpeyvdxhofx Ab Toi Further equipment: Driver airbag, trailer socket preparation, traction control (ASR), C-series configuration, electronically adjustable and heated mirrors, long mirrors for 2,350 mm body width, brake assist, electronic brakeforce distribution, driver assistance: lane departure warning, digital tachograph, tinted windscreen and side windows, 8-speed automatic transmission (Hi-Matic), A-pillar grab handle, body/chassis: standard dropside, instrument cluster with pixel matrix display, headlight range adjustment, 3.0L - 125 kW diesel engine w/ catalytic converter, radio preparation with speakers, wheelbase 4,750 mm, spare wheel with road tires, spare wheel holder between chassis rails, low-emission according to Euro 5, cab seats: passenger double bench with headrests, service indicator, permissible gross weight 7.00 t ----Looking for leasing or financing? We offer attractive deals—also possible with no down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00–18:00 Sat: 9:00–14:00 ----Note: All details provided on the Internet are non-binding and serve only as a general description of the vehicle. Errors, omissions and prior sale excepted. The binding condition of the vehicle is determined solely by the purchase contract concluded on site or by written confirmation. Vehicles with mileage exceeding 50,000 km or older than 3 years are primarily sold to our business customers.

Condition: used, functionality: limited functionality, Year of construction: 2017, operating hours: 1,180 h, Drive concept: H-DRIVE (diesel-hydraulic) Transport dimensions: 16,525 x 3,200 x 3,400 mm (L x W x H) Discharge conveyor overflow lower deck (medium fraction): 650 x 10,200 mm (W x L), discharge height 5,000 mm Discharge conveyor overflow middle deck (medium fraction): 650 x 10,200 mm (W x L), discharge height 5,000 mm Discharge conveyor overflow upper deck (oversize): 500 x 8,900 mm (W x L), discharge height 5,020 mm Fine discharge conveyor: 1,200 x 6,600 mm (W x L), discharge height min/max: 3,300/4,500 mm Kdsdpfsyvfczex Ab Tji Belt conveyor fine fraction extraction: 650 x 1,800 mm (W x L) Screen unit type: triple-deck classification screen Upper deck dimensions: 1,550 x 4,500 mm (W x L) Max. feed size: 160 x 100 x 60 mm Feed height: 2,520 mm Feed height – foldable bar grate: 3,580 mm Feed capacity up to approx.: 350 t/h Hopper volume: 8 m³ Feed conveyor: 1,200 x 10,300 mm (W x L)